fixes#24837
I really wanted to name the variable just `stream` and leave `defer:
...` and `result =...` out, but the compiler says the variable is
redefined, so this is the form.
(cherry picked from commit 2ed45eb848)
This change adds `withValue` templates for the `Table` type that are
able to operate on immutable table values -- the existing implementation
requires a `var`.
This is needed for situations where performance is sensitive. There are
two goals with my implementation:
1. Don't create a copy of the value in the table. That's why I need the
`cursor` pragma. Otherwise, it would copy the value
2. Don't double calculate the hash. That's kind of intrinsic with this
implementation. But the only way to achieve this without this PR is to
first check `if key in table` then to read `table[key]`
I brought this up in the discord and a few folks tried to come up with
options that were as fast as this, but nothing quite matched the
performance here. Thread starts here:
https://discord.com/channels/371759389889003530/371759389889003532/1355206546966974584
(cherry picked from commit 0f5732bc8c)
- Allows using with `--experimental:strictFuncs`
- `{.cast(noSideEffect).}:` inside the proc was required to mutate
`s.len`, same as used in `newSeqImpl`.
- Removed now unnecessary `noSideEffect` casts in `system.nim`
-
Closes#24811
Co-authored-by: ringabout <43030857+ringabout@users.noreply.github.com>
(cherry picked from commit ecdcffed4b)
Multiple replacements based on character sets in a single pass. Useful
for string sanitation. Follows existing `multiReplace` semantics.
Note: initially copied the substring version logic with a `while` and a
named block break, but Godbolt showed it had produced slightly larger
assembly using higher registers than the final version.
- [x] Tests
- [x] changelog.md
(cherry picked from commit 909f3b8b79)
Async SSL socket SIGSEGV's sometimes when calling socket.close() while
send/recv. The issue was found here
https://github.com/nitely/nim-hyperx/pull/59.
Possibly related: #24024
This can occur when closing the socket while sending or receiving,
because `socket.sslHandle` is freed. The sigsegv can also occur on calls
that require `socket.bioIn` or `socket.bioOut` because those use
`socket.sslHandle` internally. This PR checks sslHandle is set before
doing any operation that requires it.
(cherry picked from commit 9ace1f97ac)
Without this fix, trying to use `scanTuple` in a generic proc imported
from a different module fails to compile (`undeclared identifier:
'scanf'`):
```nim
# module.nim
import std/strscans
proc scan*[T](s: string): (bool, string) =
s.scanTuple("$+")
```
```nim
# main.nim
import ./module
echo scan[int]("foo")
```
Workaround is to `export scanf` in `module.nim` or `import std/strscans`
in `main.nim`.
(cherry picked from commit f8294ce06e)
fixes#24673
The problem is that there is no way to distinguish `cint`, `cint`, etc
ctypes with Nim types. So `when T is cint | clong | clonglong:` is true
for types derived from `int`, `int32` and `int64`. In this PR, it fixes
the branch to avoid erros for `Natural`
(cherry picked from commit b211ada273)
With some inputs larger than `BiggestUInt.high`, `parseBiggestUInt` proc
in `parseutils.nim` fails to detect overflow and returns random value.
This is because `rawParseUInt` try to detects overflow with `if prev >
res:` but it doesn't detects the overflow from multiplication.
It is possible that `x *= 10` causes overflow and resulting value is
larger than original value.
Here is example values larger than `BiggestUInt.high` but
`parseBiggestUInt` returns without detecting overflow:
```
22751622367522324480000000
41404969074137497600000000
20701551093035827200000000000000000
22546225502460313600000000000000000
204963831854661632000000000000000000
```
Following code search for values larger than `BiggestUInt.high` and
`parseBiggestUInt` cannot detect overflow:
```nim
import std/[strutils]
const
# Increase this to extend search range
NBits = 34'u
NBitsMax1 = 1'u shl NBits
NBitsMax = NBitsMax1 - 1'u
# Increase this when there are too many results and want to see only larger result.
MinMultiply10 = 14
var nfound = 0
for i in (NBitsMax div 10'u + 1'u) .. NBitsMax:
var
x = i
n10 = 0
for j in 0 ..< NBits:
let px = x
x = (x * 10'u) and NBitsMax
if x < px:
break
inc n10
if n10 >= MinMultiply10:
echo "i = ", i
echo "uint: ", (i shl (64'u - NBits)), '0'.repeat n10
inc nfound
if nfound > 15:
break
echo "found: ", nfound
```
(cherry picked from commit 95b1dda1db)
Essentially this PR removes the `{.error.}` pragmas littered around in
the OS module and submodules which prevents them from being imported if
the target OS is not supported. This made it impossible to use certain
supported features of the OS module in macros from a supported host OS.
Instead of the `{.error.}` pragmas the `oscommon` module now has a
constant `supportedSystem` which is false in the cases where the
`{.error.}` pragmas where generated. All procedures which can't be run
by macros is also not declared when `supportedSystem` is false.
It would be possible to create dummy versions of the omitted functions
with an `{.error.}` pragma that would trigger upon their use, but this
is currently not done.
This properly fixes#19414
(cherry picked from commit 1f9cac1f5c)
This pull request adds the `cumproded` function along with its in-place
equivalent, `cumprod`, to the math library. These functions provide
functionality similar to `cumsum` and `cumsummed`, allowing users to
calculate the cumulative sum of elements.
The `cumprod` function computes the cumulative product of elements
in-place, while `cumproded` additionally returns the prod seq.
(cherry picked from commit 4aff12408c)
This makes await point to the caller line instead of asyncmacro. It also
reworks the "Async traceback:" section of the traceback. Follow up PR
#21091 (issue #19931) so it works if there is asynchronous work done.
(cherry picked from commit 2f127bf99f)
With this example
```nim
import std/strformat
echo fmt"{invalid, code}"
```
We get the error message
```
stack trace: (most recent call last)
/home/jake/.choosenim/toolchains/nim-hashdevel/lib/pure/strformat.nim(750, 16) fmt
/home/jake/.choosenim/toolchains/nim-hashdevel/lib/pure/strformat.nim(714, 16) strformatImpl
/home/jake/Documents/projects/Nim/temp.nim(3, 9) template/generic instantiation of `fmt` from here
/home/jake/.choosenim/toolchains/nim-hashdevel/lib/pure/strformat.nim(714, 16) Error: could not parse `invalid, code` in `{invalid, code}`.
(1, 8) Error: invalid indentation
```
After PR it now shortens it to just appear in user code
```
/home/jake/Documents/projects/Nim/lib/pure/strformat.nim(750, 16) fmt
/home/jake/Documents/projects/Nim/lib/pure/strformat.nim(714, 16) strformatImpl
/home/jake/Documents/projects/Nim/temp.nim(3, 9) Error: could not parse `invalid, code` in `{invalid, code}`.
(1, 8) Error: invalid indentation
```
(cherry picked from commit da9f7f671b)
`curTimeout` is calculated incorrectly. So this PR fixes it.
This PR also replaces `now()` with `getMonoTime()`.
(cherry picked from commit bbf6a62c90)
fixes#24472
Excluding variables which are initialized in the nimvm branch so that
they won't interfere the other branch
(cherry picked from commit e7f48cdd5c)
This commit fixes/adds tests for and fixes several issues with `JOIN`
operator parsing:
- For OUTER joins, LEFT | RIGHT | FULL specifier is not optional
```nim
doAssertRaises(SqlParseError): discard parseSql("""
SELECT id FROM a
OUTER JOIN b
ON a.id = b.id
""")
```
- For NATURAL JOIN and CROSS JOIN, ON and USING clauses are forbidden
```nim
doAssertRaises(SqlParseError): discard parseSql("""
SELECT id FROM a
CROSS JOIN b
ON a.id = b.id
""")
```
- JOIN should parse as part of FROM, not after WHERE
```nim
doAssertRaises(SqlParseError): discard parseSql("""
SELECT id FROM a
WHERE a.id IS NOT NULL
INNER JOIN b
ON a.id = b.id
""")
```
- LEFT JOIN should parse
```nim
doAssert $parseSql("""
SELECT id FROM a
LEFT JOIN b
ON a.id = b.id
""") == "select id from a left join b on a.id = b.id;"
```
- NATURAL JOIN should parse
```nim
doAssert $parseSql("""
SELECT id FROM a
NATURAL JOIN b
""") == "select id from a natural join b;"
```
- USING should parse
```nim
doAssert $parseSql("""
SELECT id FROM a
JOIN b
USING (id)
""") == "select id from a join b using (id );"
```
- Multiple JOINs should parse
```nim
doAssert $parseSql("""
SELECT id FROM a
JOIN b
ON a.id = b.id
LEFT JOIN c
USING (id)
""") == "select id from a join b on a.id = b.id left join c using (id );"
```
(cherry picked from commit 46bb47a444)
This fixes several cases of the Nim binding of nfds_t being inconsistent
with the target platform signedness and/or size.
Additionally, it fixes poll's third argument (timeout) being set to Nim
"int" when it should have been "cint".
The former is the same issue that #23045 had attempted to fix, but
failed because it only considered Linux. (Also, it was only applied to
version 2.0, so the two branches now have incompatible versions of the
same bug.)
Notes:
* SVR4's original "unsigned long" definition is cloned by Linux and
Haiku. Nim got this right for Haiku and Linux-amd64, but it was wrong on
non-amd64 Linux.
* Zephyr does not have nfds_t, but simply uses (signed) "int". This was
already correctly reflected by Nim.
* OpenBSD poll.h uses "unsigned int", and other BSD derivatives follow
suit. This being the most commonly copied definition, the fallback case
now returns cuint. (This also seems to be correct for the OS X headers I
could find on the web.)
* This changes Nintendo Switch nfds_t to cuint from culong. It is
purportedly a FreeBSD derivative, so I *think* this is correct, but I
can't tell because I don't have access to the Nintendo Switch headers.
I have also moved the platform-specific Tnfds to posix.nim so that we
can reuse the fallback logic on all platforms. (e.g. specifying the size
in posix_linux_amd64 only to then use when defined(linux) in posix_other
seems redundant.)
(cherry picked from commit 67442471ae)
refs #6978, refs #6752, refs #21613, refs #24234
The `jsNoInt64`, `whenHasBigInt64`, `whenJsNoBigInt64` templates are
replaced with bool constants to use with `when`. Weird that I didn't do
this in the first place.
The `whenJsNoBigInt64` template was also slightly misleading. The first
branch was compiled for both no bigint64 on JS as well as on C/C++. It
seems only `trandom` depended on this by mistake.
The workaround for #6752 added in #6978 to `times` is also removed with
`--jsbigint64:on`, but #24233 was also encountered with this, so this PR
depends on #24234.
(cherry picked from commit 041098e882)
As said in the warning after #21659, a set of ints defaults to
`set[range[0..65535]]` which is very large. So in osproc, a `case`
statement is used instead of an int set to check for an int being one of
2 values.
Also tested all of CI with the warning from #21659 as an error, this
seems to be the only remaining case in CI.
(cherry picked from commit 706985997e)
I have added a new overload of `^` for float exponents.
Is two overloads for `float32` and `float64` better than just one
overload with `SomeFloat` type ?
I guess this would not work with `SomeFloat`, as `pow` is not defined
for `float`.
Another remark. Maybe we should catch exponents with 0.5 and call `sqrt`
instead ?
---------
Co-authored-by: Clay Sweetser <Varriount@users.noreply.github.com>
Co-authored-by: metagn <metagngn@gmail.com>
(cherry picked from commit e9a4d096ab)
fixes#23587
As explained in the issue, `getOrDefault` has a parameter named
`default` that can be a proc after generic instantiation. But the
parameter having a proc type [overrides all other
overloads](f73e03b132/compiler/semexprs.nim (L1203))
including the magic `system.default` overload and causes a compile error
if the proc doesn't match the normal use of `default`. To fix this, the
`result = default(B)` initializer call is removed because it's not
needed, `result` is always set in `getOrDefaultImpl` when a default
value is provided.
This is still a suspicious behavior of the compiler but `tables` working
has a higher priority.
(cherry picked from commit 67ea754b7f)
Hello, I am the original developer credited in this file.
I no longer wish to be credited for the it so I've updated it to say
"Nim Contributors".
This is a quick edit from the GitHub Web UI so let me know if I need to
make any changes to get this merged.
Thank you.
---------
Co-authored-by: ringabout <43030857+ringabout@users.noreply.github.com>
(cherry picked from commit f420a5a273)
refs #24207
The `-d:nimUseCAtomics` flag added in #24207 is now inverted and made
into `-d:nimUseCppAtomics`, which means C++ atomics are only enabled
with the define. This flag is now also documented and tested.
refs https://github.com/nim-lang/Nim/pull/24200#issuecomment-2382501282
Workaround for C++ Atomic[T] issues that doesn't require a compiler
change. Not tested or documented in case it's not meant to be officially
supported, locally tested `tatomics` and #24159 to work with it though,
can add these as tests if required.
Since the module allows for a handler to be added multiple times, for
the sake of consistency, `removeHandler` only removes the first found
instance of the handler in the `handlers` seq. So for n calls of
`addHandler` using the same handler, n calls of `removeHandler` are
required.
fixes#23757
---------
Co-authored-by: Andreas Rumpf <rumpf_a@web.de>
kqueue will remove pipes automatically if their read end is closed.
Unfortunately this means that trying to unregister it (which is
necessary to clean up resources & for consistency with other ioselectors
implementations) will set an ENOENT error, which currently raises an
exception.
(ETA: in other words, it is currently impossible to call unregister on a
pipe fd without potentially getting the selector into an invalid state
on platforms with kqueue.)
Avoid this issue by ignoring ENOENT errors returned from kqueue.
(Tested on FreeBSD. I added a test case to the tioselectors file; the
seemingly unrelated change is to fix a race condition that doesn't
appear on Linux, so that it would run my code too.)
refs #21682, refs #24038
The `rangeBase` typetrait added in #21682 which gives the base type of a
range type is now added publicly to `typetraits`. Previously it was only
privately used in `repr_v2` and in `enumutils` since #24052
(coincidentally I didn't see this until now). This is part of an effort
to make range types easier to work with in generics, as mentioned in
#24038. Its use combined with #24037 is also tested.
The condition for the "enum to enum conversion" warning is now also
restricted to conversions between different enum base types, i.e.
conversion between an enum type and a range type of itself doesn't give
a warning. I put this in this PR since the test gave the warning and so
works as a regression test.
