removed os2 support & support for building SDL with watcom.

docs/README-os2.md

@@ -1,89 +0,0 @@
-Simple DirectMedia Layer 2 for OS/2 & eComStation
-================================================================================
-SDL port for OS/2, authored by Andrey Vasilkin <digi@os2.snc.ru>, 2016
-
-
-OpenGL and audio capture not supported by this port.
-
-Additional optional environment variables:
-
-SDL_AUDIO_SHARE
-  Values: 0 or 1, default is 0
-  Initializes the device as shareable or exclusively acquired.
-
-SDL_VIDEODRIVER
-  Values: DIVE or VMAN, default is DIVE
-  Use video subsystem: Direct interface video extensions (DIVE) or
-  Video Manager (VMAN).
-
-You may significantly increase video output speed with OS4 kernel and patched
-files vman.dll and dive.dll or with latest versions of ACPI support and video
-driver Panorama.
-
-Latest versions of OS/4 kernel:
-  http://gus.biysk.ru/os4/
- (Info: https://www.os2world.com/wiki/index.php/Phoenix_OS/4)
-
-Patched files vman.dll and dive.dll:
-  http://gus.biysk.ru/os4/test/pached_dll/PATCHED_DLL.RAR
-
-
-Compiling:
-----------
-
-Open Watcom 1.9 or newer is tested. For the new Open Watcom V2 fork, see:
-https://github.com/open-watcom/ and https://open-watcom.github.io
-WATCOM environment variable must to be set to the Open Watcom install
-directory. To compile, run: wmake -f Makefile.os2
-
-
-Installing:
------------
-
-- eComStation:
-
-  If you have previously installed SDL3, make a Backup copy of SDL3.dll
-  located in D:\ecs\dll (where D: is disk on which installed eComStation).
-  Stop all programs running with SDL3. Copy SDL3.dll to D:\ecs\dll
-
-- OS/2:
-
-  Copy SDL3.dll to any directory on your LIBPATH.  If you have a previous
-  version installed, close all SDL3 applications before replacing the old
-  copy.  Also make sure that any other older versions of DLLs are removed
-  from your system.
-
-
-Joysticks:
-------------------
-
-The Joystick detection only works for standard joysticks (2 buttons, 2 axes
-and the like). Therefore, if you use a non-standard joystick, you should
-specify its features in the SDL_OS2_JOYSTICK environment variable in a batch
-file or CONFIG.SYS, so SDL applications can provide full capability to your
-device. The syntax is:
-
-SET SDL_OS2_JOYSTICK=[JOYSTICK_NAME] [AXES] [BUTTONS] [HATS] [BALLS]
-
-So, it you have a Gravis GamePad with 4 axes, 2 buttons, 2 hats and 0 balls,
-the line should be:
-
-SET SDL_OS2_JOYSTICK=Gravis_GamePad 4 2 2 0
-
-If you want to add spaces in your joystick name, just surround it with
-quotes or double-quotes:
-
-SET SDL_OS2_JOYSTICK='Gravis GamePad' 4 2 2 0
-
-or
-
-SET SDL_OS2_JOYSTICK="Gravis GamePad" 4 2 2 0
-
-   Note however that Balls and Hats are not supported under OS/2, and the
-value will be ignored... but it is wise to define these correctly because
-in the future those can be supported.
-
-   Also the number of buttons is limited to 2 when using two joysticks,
-4 when using one joystick with 4 axes, 6 when using a joystick with 3 axes
-and 8 when using a joystick with 2 axes. Notice however these are limitations
-of the Joystick Port hardware, not OS/2.

docs/README.md

@@ -34,7 +34,6 @@ More documentation and FAQs are available online at [the wiki](http://wiki.libsd
 - [iOS](README-ios.md)
 - [Linux](README-linux.md)
 - [macOS](README-macos.md)
-- [OS/2](README-os2.md)
 - [Native Client](README-nacl.md)
 - [Supported Platforms](README-platforms.md)
 - [Porting information](README-porting.md)