The Xbox Adaptive Controller reports the pressed guide button state as 2
instead of 1. This is contrary to the spec, but it's needed for the guide
button to work.
This also adds a bit more documentation on observed-but-not-known GUIDs.
Flydigi IMU rate now matches observed rate of packets in both dongle and wired connection.
Flydigi Vader 4 Pro IMU rate correction was set at a fixed 125hz. In actuality rate is 1000hz over dongle and 500hz when wired.
Gathered correct IMU polling rate in wired mode for good gyro synchronization.
Wireless: different models had different amounts of Bluetooth packet loss.
USB_PRODUCT_8BITDO_ULTIMATE2_WIRELESS: Solid 120hz over bluetooth (note: only appears via).
USB_PRODUCT_8BITDO_PRO_2_BT: Lossy - 80-90hz registered.
SB_PRODUCT_8BITDO_SN30_PRO_BT & USB_PRODUCT_8BITDO_SN30_PRO_BT: Very Lossy - 60-90hz registered
This mostly fixes stylistic issues, but also fixes an issue with some
controllers where an erroneous check would clear the DLI flag, offsetting the
share button index so it wouldn't work.
SDL_PrivateJoystickAdded was called before setting the InstanceId in the adapters ctx->joysticks array. This would eventually broadcast the SDL_EVENT_JOYSTICK_ADDED event with the new InstanceId, if your program listens for the added events and opens joysticks at that point it would always fail because there would be no matching InstanceId in the ctx->joysticks array.
This loop breakout was originally from an attempt to parse coalesced packets.
Breaking out early does more harm than good, and no devices coalesce packets,
so this is unnecessary.
By moving the message sending onto the main thread and adding a small timeout
we can now ensure the ACKs are sent fast enough to avoid the firmware bugs in
these controllers.
At the moment, only the ThrustMaster T.Flight Hotas One has full support. The
documentation says you can query the extra buttons via a specific command, but
the stick appears to reject the command. Further investigation is needed for
automatically querying this state.
This is needed for future work bringing up things like the chatpad.
This commit also fixes a few minor things, such as still sending motor packets
to devices that don't support it, enabling quirks that hide trigger rumble on
devices that are marked as not having it, and fixing #12942.
Using a 0 sequence number is always allowed and avoids having to synchronize sequence numbers with the controller (and potentially confusing other things talking to the controller)
Also fixes occasional long running rumble at controller connection.
