SDL has been building on GNU/Hurd for a long time, using either drivers
based on external libraries (e.g. X11, pulseaudio, sndio, etc) or dummy
drivers. This commit introduces it explicitly as platform, so it can be
recognized, and tweaked as needed. In particular:
- introduce the SDL_PLATFORM_HURD define
- tighten/improve the platform detection in cmake, and use "Hurd" as
identifier
- return the platform name in SDL_GetPlatform()
- tweak the CFLAGS/LDFLAGS so pthreads can be used properly
- implement SDL_GetExeName(), using /proc/self/exe as provided by the
basic Linux-like procfs
- enable GLES 2 in tests (mostly for consistency with Linux)
- Use modern Xkb functions where appropriate and cleanly separate the modern and legacy paths.
- Remove the deprecated XKeycodeToKeysym function in favor of directly querying the keymap on the legacy path.
- Look up virtual modifiers by name on the Xkb path to better handle remapping (equivalent to the modifier handling under Wayland).
- Optimize keymap creation on the Xkb path to cut keymap build times and enable fast group switching (equivalent to keymap handling on Wayland).
- Enable and handle Xkb events to handle changes to the group, mapping, and modifier states. This is more reliable than using the legacy events (group changes may not arrive if the window lacks pointer focus), and better handles cases where modifiers are latched, locked, or activated externally rather than physically pressed.
xkbcommon 1.10.0 declared certain modifier names to be deprecated, and the current plan is to remove them in 1.12.0. Use the new recommended names and modifier mask retrieval function when building against version 1.10.0 and higher.
This fixes the feature detection in cases where linking the final executable would fail.
This is fine since SDL only opens these libraries using dlopen as well.
These changes enable the Logitech G29 wheel to run on hidapi with both SDL_Joystick and SDL_Haptic interfaces.
While it is already possible to use the wheel on Linux in WINE + SDL2 thanks to the in-tree evdev driver as well as new-lg4ff, these set of changes allow the G29 to be used with WINE under MacOS and FreeBSD
These wheels should also be supported, but I can only test them from G29's compat modes: G27, G25, DFGT, DFP, DFEX
Haptic and led support are ported from https://github.com/berarma/new-lg4ff
XkbKeycodeToKeySym is replaced with XkbLookupKeySym, which can take the modifier states. The associated cmake check has been renamed for consistency.
Only the XKB path is currently handled. The deprecated XKeycodeToKeysym path is TODO.
The PipeWire camera will enumerate the pipewire Video/Source nodes with
their formats.
When capturing is started, a stream to the node will be created and
frames will be captured.
If cmake is invoked with -DSDL_ALSA=OFF, the misleading warning
message "Unable to find the alsa development library" is printed.
It's misleading because no attempt was actually made to find the ALSA
development library. It's always printed by the CheckALSA macro if
SDL_ALSA is false.
This commit moves this warning message in the CheckALSA macro to being
printed if ALSA_FOUND is false. However, I don't see an explicit warning
message like this for the other macros that search for development
libraries, so I wonder if the message shouldn't just be removed
entirely. It seems redundant with the "Could NOT find ALSA ..." message
generated by cmake.
Before this commit:
$ cmake -B build -DSDL_ALSA=OFF
[...]
CMake Warning at cmake/sdlchecks.cmake:125 (message):
Unable to find the alsa development library
Call Stack (most recent call first):
CMakeLists.txt:1530 (CheckALSA)
[...]
-- Options:
-- SDL_ALSA (Wanted: OFF): OFF
[...]
$ cmake -B build -DSDL_ALSA=ON
[...]
-- Could NOT find ALSA (missing: ALSA_LIBRARY ALSA_INCLUDE_DIR)
[...]
-- Options:
-- SDL_ALSA (Wanted: ON): OFF
[...]
After this commit:
$ cmake -B build -DSDL_ALSA=OFF
[...]
-- Options:
-- SDL_ALSA (Wanted: OFF): OFF
[...]
$ cmake -B build -DSDL_ALSA=ON
[...]
-- Could NOT find ALSA (missing: ALSA_LIBRARY ALSA_INCLUDE_DIR)
CMake Warning at cmake/sdlchecks.cmake:123 (message):
Unable to find the alsa development library
Call Stack (most recent call first):
CMakeLists.txt:1530 (CheckALSA)
[...]
-- Options:
-- SDL_ALSA (Wanted: ON): OFF
[...]
All of the cmake invocations above were without the libasound2-dev
package installed.
This pull request adds an implementation of a Vulkan Render backend to SDL. I have so far tested this primarily on Windows, but also smoke tested on Linux and macOS (MoltenVK). I have not tried it yet on Android, but it should be usable there as well (sans any bugs I missed). This began as a port of the SDL Direct3D12 Renderer, which is the closest thing to Vulkan as existed in the SDL codebase. The shaders are more or less identical (with the only differences being in descriptor bindings vs root descriptors). The shaders are built using the HLSL frontend of glslang.
Everything in the code is pure Vulkan 1.0 (no extensions), with the exception of HDR support which requires the Vulkan instance extension `VK_EXT_swapchain_colorspace`. The code could have been simplified considerably if I used dynamic rendering, push descriptors, extended dynamic state, and other modern Vulkan-isms, but I felt it was more important to make the code as vanilla Vulkan as possible so that it would run on any Vulkan implementation.
The main differences with the Direct3D12 renderer are:
* Having to manage renderpasses for performing clears. There is likely some optimization that would still remain for more efficient use of TBDR hardware where there might be some unnecessary load/stores, but it does attempt to do clears using renderpasses.
* Constant buffer data couldn't be directly updated in the command buffer since I didn't want to rely on push descriptors, so there is a persistently mapped buffer with increasing offset per swapchain image where CB data gets written.
* Many more resources are dependent on the swapchain resizing due to i.e. Vulkan requiring the VkFramebuffer to reference the VkImageView of the swapchain, so there is a bit more code around handling that than was necessary in D3D12.
* For NV12/NV21 textures, rather than there being plane data in the texture itself, the UV data is placed in a separate `VkImage`/`VkImageView`.
I've verified that `testcolorspace` works with both sRGB and HDR linear. I've tested `testoverlay` works with the various YUV/NV12/NV21 formats. I've tested `testsprite`. I've checked that window resizing and swapchain out-of-date handling when minimizing are working. I've run through `testautomation` with the render tests. I also have run several of the tests with Vulkan validation and synchronization validation. Surely I will have missed some things, but I think it's in a good state to be merged and build out from here.
It is becoming necessary to enable additional features as libdecor continues to evolve, and checking against a single base version will no longer be adequate. Libdecor doesn't provide versioning defines in its headers, so split the version string into parts to allow for discrete version detection and feature enablement at build time.
At the point that we run this, nothing SDL-specific is set up yet.
__APPLE__ is a compiler predefined macro that forms part of the API on
Apple platforms, so it's fine to rely on it.
This partially reverts commit 31d133db.
Fixes: 31d133db "Define SDL_PLATFORM_* macros instead of underscored ones (#8875)"
Signed-off-by: Simon McVittie <smcv@collabora.com>
These were added a very long time ago and seem to serve no purpose now, as the functionality they provided is now in core Wayland protocols, current information on their usage and status is nonexistent, no modern compositor seems to support them, and the code paths are untested and subject to bit-rot at this point. It also causes duplicate symbol issues when statically linking an application to both Qt and SDL.
This reverts commit 6fd0613ac8.
Turns out that the Steam Runtime is still on PulseAudio 1.1, and the only
thing we (currently) need a newer Pulse for is pa_threaded_mainloop_set_name,
so let's just go back to treating that symbol as optional.
We might need to force a higher version at some point, but it's not worth it
over this.
main features:
- No more sdl-build-options/sdl-shared-build-options/sdl-global-options
- Dependency information is stored on SDL3-collector for sdl3.pc
- Use helper functions to modify the SDL targets;
- sdl_sources to add sources
- sdl_glob_sources to add glob soruces
- sdl_link_dependency to add a link dependency that might also
appear in sdl3.pc/SDL3Config.cmake
- sdl_compile_definitions to add macro's
- sdl_compile_options for compile options
- sdl_include_directories for include directories
They avoid repeated checks for existence of the SDL targets
- A nice feature of the previous is the ability to generate
a sdl3.pc or SDL3Config.cmake that describes its dependencies
accurately.
various:
- remove duplicate libc symbol list
- add CheckVulkan
- remove unused HAVE_MPROTECT
- add checks for getpagesize
Adds the SDL_EVENT_WINDOW_OCCLUDED events and the window flag SDL_WINDOW_OCCLUDED to report when the window occlusion state has changed, so that the application can take appropriate measures, as it may wish to suspend drawing, throttle, or otherwise behave in a more energy efficient manner when the window is not visible. When the window is no longer occluded, the SDL_EVENT_WINDOW_EXPOSED event is sent and the occlusion flag is cleared.
This is handled on macOS via the window occlusion state event (available as of 10.9), and via the xdg-shell protocol on Wayland (version 6, wayland-protocols 1.32, passed through in libdecor 0.1.2).
- SDL_AudioCVT is gone, even internally.
- libsamplerate is gone (I suspect our resampler is finally Good Enough).
- Cleanups and improvements to audio conversion interfaces.
- SDL_AudioStream can change its input/output format/rate/channels on the fly!
