From b524338261841e1e1f15a3e9cb3b644fd66ec0b8 Mon Sep 17 00:00:00 2001 From: "Chen, Ting-An" <73953029+nrps9909@users.noreply.github.com> Date: Wed, 19 Aug 2026 04:27:14 +0800 Subject: [PATCH] fix(l10n): refresh Traditional Chinese message catalog #41273 Problem: The zh_TW catalog was stale, omitted 743 messages from the current source, and contained empty, fuzzy, and format-unsafe translations. Solution: Regenerate the catalog with the official translation build, preserve the focused translation repairs, and translate the reported E5200 diagnostic. --- src/nvim/po/zh_TW.UTF-8.po | 16454 ++++++++++++++++++++--------------- 1 file changed, 9286 insertions(+), 7168 deletions(-) diff --git a/src/nvim/po/zh_TW.UTF-8.po b/src/nvim/po/zh_TW.UTF-8.po index ddd8f2c1e9..6d8c0a2501 100644 --- a/src/nvim/po/zh_TW.UTF-8.po +++ b/src/nvim/po/zh_TW.UTF-8.po @@ -42,1040 +42,17 @@ msgid "" msgstr "" "Project-Id-Version: Vim(Traditional Chinese)\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2014-05-26 14:21+0200\n" -"PO-Revision-Date: Mon Feb 19 22:49:21 CST 2001\n" -"Last-Translator: Hung-Te Lin \n" +"POT-Creation-Date: 2026-08-12 10:00+0800\n" +"PO-Revision-Date: 2026-08-11 18:52+0800\n" +"Last-Translator: nrps9909 <73953029+nrps9909@users.noreply.github.com>\n" "Language-Team: Hung-Te Lin , Cecil Sheng " "\n" -"Language: \n" +"Language: zh_TW\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" -"Content-Transfer-Encoding: 8-bit\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=1; plural=0;\n" -#: ../api/private/helpers.c:201 -#, fuzzy -msgid "Unable to get option value" -msgstr "無法傳送回應訊息" - -#: ../api/private/helpers.c:204 -msgid "internal error: unknown option type" -msgstr "內部錯誤: 未知的選項類型" - -#: ../buffer.c:92 -msgid "[Location List]" -msgstr "[Location 列表]" - -#: ../buffer.c:93 -msgid "[Quickfix List]" -msgstr "[Quickfix 列表]" - -#: ../buffer.c:94 -msgid "E855: Autocommands caused command to abort" -msgstr "E855: 自動命令導致命令被停止" - -#: ../buffer.c:135 -msgid "E82: Cannot allocate any buffer, exiting..." -msgstr "E82: 無法配置任何緩衝區，離開程式..." - -#: ../buffer.c:138 -msgid "E83: Cannot allocate buffer, using other one..." -msgstr "E83: 無法配置緩衝區，使用另一個緩衝區...." - -#: ../buffer.c:763 -msgid "E515: No buffers were unloaded" -msgstr "E515: 沒有釋放任何緩衝區" - -#: ../buffer.c:765 -msgid "E516: No buffers were deleted" -msgstr "E516: 沒有刪除任何緩衝區" - -#: ../buffer.c:767 -msgid "E517: No buffers were wiped out" -msgstr "E517: 沒有清除任何緩衝區" - -#: ../buffer.c:772 -msgid "1 buffer unloaded" -msgstr "已釋放一個緩衝區" - -#: ../buffer.c:774 -#, c-format -msgid "%d buffers unloaded" -msgstr "已釋放 %d 個緩衝區" - -#: ../buffer.c:777 -msgid "1 buffer deleted" -msgstr "已刪除一個緩衝區" - -#: ../buffer.c:779 -#, c-format -msgid "%d buffers deleted" -msgstr "已刪除 %d 個緩衝區" - -#: ../buffer.c:782 -msgid "1 buffer wiped out" -msgstr "已刪除一個緩衝區" - -#: ../buffer.c:784 -#, c-format -msgid "%d buffers wiped out" -msgstr "已刪除 %d 個緩衝區" - -#: ../buffer.c:806 -msgid "E90: Cannot unload last buffer" -msgstr "E90: 無法釋放最後一個緩衝區" - -#: ../buffer.c:874 -msgid "E84: No modified buffer found" -msgstr "E84: 沒有修改過的緩衝區" - -#. back where we started, didn't find anything. -#: ../buffer.c:903 -msgid "E85: There is no listed buffer" -msgstr "E85: 沒有列出的緩衝區" - -#: ../buffer.c:913 -#, c-format -msgid "E86: Buffer % does not exist" -msgstr "E86: 緩衝區 % 不存在" - -#: ../buffer.c:915 -msgid "E87: Cannot go beyond last buffer" -msgstr "E87: 無法切換到更後面的緩衝區" - -#: ../buffer.c:917 -msgid "E88: Cannot go before first buffer" -msgstr "E88: 無法切換到更前面的緩衝區" - -#: ../buffer.c:945 -#, c-format -msgid "" -"E89: No write since last change for buffer % (add ! to override)" -msgstr "E89: 已更改過緩衝區 % 但尚未存檔 (可用 ! 強制執行)" - -#. wrap around (may cause duplicates) -#: ../buffer.c:1423 -msgid "W14: Warning: List of file names overflow" -msgstr "W14: 警告: 檔名過多" - -#: ../buffer.c:1555 ../quickfix.c:3361 -#, c-format -msgid "E92: Buffer % not found" -msgstr "E92: 找不到第 % 個緩衝區" - -#: ../buffer.c:1798 -#, c-format -msgid "E93: More than one match for %s" -msgstr "E93: 找到一個以上的 %s" - -#: ../buffer.c:1800 -#, c-format -msgid "E94: No matching buffer for %s" -msgstr "E94: 找不到 %s" - -#: ../buffer.c:2161 -#, c-format -msgid "line %" -msgstr "行 %" - -#: ../buffer.c:2233 -msgid "E95: Buffer with this name already exists" -msgstr "E95: 已有緩衝區使用這個名字" - -#: ../buffer.c:2498 -msgid " [Modified]" -msgstr " [已修改]" - -#: ../buffer.c:2501 -msgid "[Not edited]" -msgstr "[未編輯]" - -#: ../buffer.c:2504 -msgid "[New file]" -msgstr "[新檔案]" - -#: ../buffer.c:2505 -msgid "[Read errors]" -msgstr "[讀取錯誤]" - -#: ../buffer.c:2506 ../buffer.c:3217 ../fileio.c:1807 ../screen.c:4895 -msgid "[RO]" -msgstr "[唯讀]" - -#: ../buffer.c:2507 ../fileio.c:1807 -msgid "[readonly]" -msgstr "[唯讀]" - -#: ../buffer.c:2524 -#, c-format -msgid "1 line --%d%%--" -msgstr "行數 1 --%d%%--" - -#: ../buffer.c:2526 -#, c-format -msgid "% lines --%d%%--" -msgstr "行數 % --%d%%--" - -#: ../buffer.c:2530 -#, c-format -msgid "line % of % --%d%%-- col " -msgstr "行 %/% --%d%%-- 欄 " - -#: ../buffer.c:2632 ../buffer.c:4292 ../memline.c:1554 -#, fuzzy -msgid "[No Name]" -msgstr "[未命名]" - -#. must be a help buffer -#: ../buffer.c:2667 -msgid "help" -msgstr "[輔助說明]" - -#: ../buffer.c:3225 ../screen.c:4883 -#, fuzzy -msgid "[Help]" -msgstr "[輔助說明]" - -#: ../buffer.c:3254 ../screen.c:4887 -msgid "[Preview]" -msgstr "[預覽]" - -#: ../buffer.c:3528 -msgid "All" -msgstr "全部" - -#: ../buffer.c:3528 -msgid "Bot" -msgstr "底端" - -#: ../buffer.c:3531 -msgid "Top" -msgstr "頂端" - -#: ../buffer.c:4244 -msgid "" -"\n" -"# Buffer list:\n" -msgstr "" -"\n" -"# 緩衝區列表:\n" - -#: ../buffer.c:4289 -msgid "[Scratch]" -msgstr "" - -#: ../buffer.c:4529 -msgid "" -"\n" -"--- Signs ---" -msgstr "" -"\n" -"--- 符號 ---" - -#: ../buffer.c:4538 -#, c-format -msgid "Signs for %s:" -msgstr "%s 的符號:" - -#: ../buffer.c:4543 -#, c-format -msgid " line=% id=%d name=%s" -msgstr " 行=% id=%d 名稱=%s" - -#: ../cursor_shape.c:68 -msgid "E545: Missing colon" -msgstr "E545: 缺少 colon" - -#: ../cursor_shape.c:70 ../cursor_shape.c:94 -msgid "E546: Illegal mode" -msgstr "E546: 不正確的模式" - -#: ../cursor_shape.c:134 -msgid "E548: digit expected" -msgstr "E548: 應該要有數字" - -#: ../cursor_shape.c:138 -msgid "E549: Illegal percentage" -msgstr "E549: 不正確的百分比" - -#: ../diff.c:146 -#, c-format -msgid "E96: Can not diff more than % buffers" -msgstr "E96: 無法比較(diff) %個以上的緩衝區" - -#: ../diff.c:753 -#, fuzzy -msgid "E810: Cannot read or write temp files" -msgstr "E557: 無法開啟 termcap 檔案" - -#: ../diff.c:755 -msgid "E97: Cannot create diffs" -msgstr "E97: 不能建立 " - -#: ../diff.c:966 -#, fuzzy -msgid "E816: Cannot read patch output" -msgstr "E98: 無法讀取 diff 的輸出" - -#: ../diff.c:1220 -msgid "E98: Cannot read diff output" -msgstr "E98: 無法讀取 diff 的輸出" - -#: ../diff.c:2081 -msgid "E99: Current buffer is not in diff mode" -msgstr "E99: 目前的緩衝區不是在 diff 模式" - -#: ../diff.c:2100 -#, fuzzy -msgid "E793: No other buffer in diff mode is modifiable" -msgstr "E100: 沒有緩衝區在 diff 模式" - -#: ../diff.c:2102 -msgid "E100: No other buffer in diff mode" -msgstr "E100: 沒有緩衝區在 diff 模式" - -#: ../diff.c:2112 -msgid "E101: More than two buffers in diff mode, don't know which one to use" -msgstr "E101: 有兩個以上的緩衝區在 diff 模式，無法決定要用哪一個" - -#: ../diff.c:2141 -#, c-format -msgid "E102: Can't find buffer \"%s\"" -msgstr "E102: 找不到緩衝區: \"%s\"" - -#: ../diff.c:2152 -#, c-format -msgid "E103: Buffer \"%s\" is not in diff mode" -msgstr "E103: 緩衝區 \"%s\" 不是在 diff 模式" - -#: ../diff.c:2193 -msgid "E787: Buffer changed unexpectedly" -msgstr "E787: 意外地改變了緩衝區" - -#: ../digraph.c:1598 -msgid "E104: Escape not allowed in digraph" -msgstr "E104: 複合字元(digraph)中不能使用 Escape" - -#: ../digraph.c:1760 -msgid "E544: Keymap file not found" -msgstr "E544: 找不到 keymap 檔" - -#: ../digraph.c:1785 -msgid "E105: Using :loadkeymap not in a sourced file" -msgstr "E105: 使用 :loadkeymap " - -#: ../digraph.c:1821 -msgid "E791: Empty keymap entry" -msgstr "E791: 空的鍵位映射項" - -#: ../edit.c:82 -msgid " Keyword completion (^N^P)" -msgstr " 關鍵字自動完成 (^N^P)" - -#. ctrl_x_mode == 0, ^P/^N compl. -#: ../edit.c:83 -#, fuzzy -msgid " ^X mode (^]^D^E^F^I^K^L^N^O^Ps^U^V^Y)" -msgstr " ^X 模式 (^E^Y^L^]^F^I^K^D^N^P)" - -#: ../edit.c:85 -msgid " Whole line completion (^L^N^P)" -msgstr " 整行自動完成 (^L^N^P)" - -#: ../edit.c:86 -msgid " File name completion (^F^N^P)" -msgstr " 檔名自動完成 (^F^N^P)" - -#: ../edit.c:87 -msgid " Tag completion (^]^N^P)" -msgstr " 標籤自動完成 (^]^N^P)" - -#: ../edit.c:88 -msgid " Path pattern completion (^N^P)" -msgstr " 路徑自動完成 (^N^P)" - -#: ../edit.c:89 -msgid " Definition completion (^D^N^P)" -msgstr " 定義自動完成 (^D^N^P)" - -#: ../edit.c:91 -msgid " Dictionary completion (^K^N^P)" -msgstr " 字典自動完成 (^K^N^P)" - -#: ../edit.c:92 -msgid " Thesaurus completion (^T^N^P)" -msgstr " Thesaurus 自動完成 (^T^N^P)" - -#: ../edit.c:93 -msgid " Command-line completion (^V^N^P)" -msgstr " 命令列自動完成 (^V^N^P)" - -#: ../edit.c:94 -#, fuzzy -msgid " User defined completion (^U^N^P)" -msgstr " 整行自動完成 (^L^N^P)" - -#: ../edit.c:95 -#, fuzzy -msgid " Omni completion (^O^N^P)" -msgstr " 標籤自動完成 (^]^N^P)" - -#: ../edit.c:96 -#, fuzzy -msgid " Spelling suggestion (^S^N^P)" -msgstr " 整行自動完成 (^L^N^P)" - -#: ../edit.c:97 -msgid " Keyword Local completion (^N^P)" -msgstr " 區域關鍵字自動完成 (^N^P)" - -#: ../edit.c:100 -msgid "Hit end of paragraph" -msgstr "已到段落結尾" - -#: ../edit.c:101 -msgid "E839: Completion function changed window" -msgstr "E839: 補全函式更改了窗口" - -#: ../edit.c:102 -msgid "E840: Completion function deleted text" -msgstr "E840: 補全函式刪除了文本" - -#: ../edit.c:1847 -msgid "'dictionary' option is empty" -msgstr "選項 'dictionary' 未設定" - -#: ../edit.c:1848 -msgid "'thesaurus' option is empty" -msgstr "選項 'thesaurus' 未設定" - -#: ../edit.c:2655 -#, c-format -msgid "Scanning dictionary: %s" -msgstr "掃瞄字典: %s" - -#: ../edit.c:3079 -msgid " (insert) Scroll (^E/^Y)" -msgstr " (插入) Scroll (^E/^Y)" - -#: ../edit.c:3081 -msgid " (replace) Scroll (^E/^Y)" -msgstr " (取代) Scroll (^E/^Y)" - -#: ../edit.c:3587 -#, c-format -msgid "Scanning: %s" -msgstr "掃瞄中: %s" - -#: ../edit.c:3614 -msgid "Scanning tags." -msgstr "掃瞄標籤." - -#: ../edit.c:4519 -msgid " Adding" -msgstr " 增加" - -#. showmode might reset the internal line pointers, so it must -#. * be called before line = ml_get(), or when this address is no -#. * longer needed. -- Acevedo. -#. -#: ../edit.c:4562 -msgid "-- Searching..." -msgstr "-- 搜尋中..." - -#: ../edit.c:4618 -msgid "Back at original" -msgstr "回到起點" - -#: ../edit.c:4621 -msgid "Word from other line" -msgstr "從別行開始的字 (?)" - -#: ../edit.c:4624 -msgid "The only match" -msgstr "只有此項符合" - -#: ../edit.c:4680 -#, c-format -msgid "match %d of %d" -msgstr "找到 %d / %d" - -#: ../edit.c:4684 -#, c-format -msgid "match %d" -msgstr "符合 %d" - -#: ../eval.c:137 -#, fuzzy -msgid "E18: Unexpected characters in :let" -msgstr "E18: '=' 前面出現了錯誤的字元" - -#: ../eval.c:138 -#, fuzzy, c-format -msgid "E684: list index out of range: %" -msgstr "E322: 行號超出範圍: % 超過結尾" - -#: ../eval.c:139 -#, c-format -msgid "E121: Undefined variable: %s" -msgstr "E121: 變數 %s 尚未定義" - -#: ../eval.c:140 -msgid "E111: Missing ']'" -msgstr "E111: 缺少對應的 \"]\"" - -#: ../eval.c:141 -#, fuzzy, c-format -msgid "E686: Argument of %s must be a List" -msgstr "E487: 參數應該是正數" - -#: ../eval.c:143 -#, fuzzy, c-format -msgid "E712: Argument of %s must be a List or Dictionary" -msgstr "E487: 參數應該是正數" - -#: ../eval.c:144 -#, fuzzy -msgid "E713: Cannot use empty key for Dictionary" -msgstr "E214: 找不到寫入用的暫存檔" - -#: ../eval.c:145 -#, fuzzy -msgid "E714: List required" -msgstr "E471: 需要指令參數" - -#: ../eval.c:146 -#, fuzzy -msgid "E715: Dictionary required" -msgstr "E129: 需要函式名稱" - -#: ../eval.c:147 -#, c-format -msgid "E118: Too many arguments for function: %s" -msgstr "E118: 函式 %s 的引數過多" - -#: ../eval.c:148 -#, c-format -msgid "E716: Key not present in Dictionary: %s" -msgstr "E716: 鍵在字典中不存在: %s" - -#: ../eval.c:150 -#, c-format -msgid "E122: Function %s already exists, add ! to replace it" -msgstr "E122: 函式 %s 已經存在, 請使用 ! 強制取代" - -#: ../eval.c:151 -#, fuzzy -msgid "E717: Dictionary entry already exists" -msgstr "E95: 已有緩衝區使用這個名字" - -#: ../eval.c:152 -#, fuzzy -msgid "E718: Funcref required" -msgstr "E129: 需要函式名稱" - -#: ../eval.c:153 -#, fuzzy -msgid "E719: Cannot use [:] with a Dictionary" -msgstr "E360: 不能用 -f 選項執行 shell" - -#: ../eval.c:154 -#, c-format -msgid "E734: Wrong variable type for %s=" -msgstr "E734: 錯誤的變數類型: %s=" - -#: ../eval.c:155 -#, fuzzy, c-format -msgid "E130: Unknown function: %s" -msgstr "E117: 未定義的函式: %s" - -#: ../eval.c:156 -#, c-format -msgid "E461: Illegal variable name: %s" -msgstr "E461: 不合法的變數名稱: %s" - -#: ../eval.c:157 -msgid "E806: using Float as a String" -msgstr "E806: 使用浮點數作為字串" - -#: ../eval.c:1830 -msgid "E687: Less targets than List items" -msgstr "E687: 目標比列表項數少" - -#: ../eval.c:1834 -msgid "E688: More targets than List items" -msgstr "E688: 目標比列表項數多" - -#: ../eval.c:1906 -msgid "Double ; in list of variables" -msgstr "變數列表出現兩個 ;" - -#: ../eval.c:2078 -#, fuzzy, c-format -msgid "E738: Can't list variables for %s" -msgstr "E138: 無法寫入 viminfo 檔案 %s !" - -#: ../eval.c:2391 -msgid "E689: Can only index a List or Dictionary" -msgstr "E689: 只能索引一個列表或者字典" - -#: ../eval.c:2396 -msgid "E708: [:] must come last" -msgstr "E708: [:] 必須在最後" - -#: ../eval.c:2439 -msgid "E709: [:] requires a List value" -msgstr "E709: [:] 需要一個列表值" - -#: ../eval.c:2674 -msgid "E710: List value has more items than target" -msgstr "E710: 列表值的項比目標多" - -#: ../eval.c:2678 -msgid "E711: List value has not enough items" -msgstr "E711: 列表值沒有足夠多的項" - -#: ../eval.c:2867 -#, fuzzy -msgid "E690: Missing \"in\" after :for" -msgstr "E69: %s%%[ 後缺少 ]" - -#: ../eval.c:3063 -#, c-format -msgid "E107: Missing parentheses: %s" -msgstr "E107: 缺少對應的括號: %s" - -#: ../eval.c:3263 -#, c-format -msgid "E108: No such variable: \"%s\"" -msgstr "E108: 無此變數: \"%s\"" - -#: ../eval.c:3333 -msgid "E743: variable nested too deep for (un)lock" -msgstr "E743: (un)lock 的變數嵌套過深" - -#: ../eval.c:3630 -msgid "E109: Missing ':' after '?'" -msgstr "E109: '?' 後缺少 ':'" - -#: ../eval.c:3893 -msgid "E691: Can only compare List with List" -msgstr "E691: 只能比較列表和列表" - -#: ../eval.c:3895 -#, fuzzy -msgid "E692: Invalid operation for Lists" -msgstr "E449: 收到不正確的運算式" - -#: ../eval.c:3915 -msgid "E735: Can only compare Dictionary with Dictionary" -msgstr "E735: 只能比較字典和字典" - -#: ../eval.c:3917 -#, fuzzy -msgid "E736: Invalid operation for Dictionary" -msgstr "E116: 函式 %s 的引數不正確" - -#: ../eval.c:3932 -msgid "E693: Can only compare Funcref with Funcref" -msgstr "E693: 只能比較Funcref 和 Funcref" - -#: ../eval.c:3934 -#, fuzzy -msgid "E694: Invalid operation for Funcrefs" -msgstr "E116: 函式 %s 的引數不正確" - -#: ../eval.c:4277 -#, fuzzy -msgid "E804: Cannot use '%' with Float" -msgstr "E360: 不能用 -f 選項執行 shell" - -#: ../eval.c:4478 -msgid "E110: Missing ')'" -msgstr "E110: 缺少對應的 \")\"" - -#: ../eval.c:4609 -#, fuzzy -msgid "E695: Cannot index a Funcref" -msgstr "E90: 無法釋放最後一個緩衝區" - -#: ../eval.c:4839 -#, c-format -msgid "E112: Option name missing: %s" -msgstr "E112: 缺少選項名稱: %s" - -#: ../eval.c:4855 -#, c-format -msgid "E113: Unknown option: %s" -msgstr "E113: 不正確的選項: %s" - -#: ../eval.c:4904 -#, c-format -msgid "E114: Missing quote: %s" -msgstr "E114: 缺少引號: %s" - -#: ../eval.c:5020 -#, c-format -msgid "E115: Missing quote: %s" -msgstr "E115: 缺少引號: %s" - -#: ../eval.c:5084 -#, fuzzy, c-format -msgid "E696: Missing comma in List: %s" -msgstr "E405: 缺少相等符號: %s" - -#: ../eval.c:5091 -#, fuzzy, c-format -msgid "E697: Missing end of List ']': %s" -msgstr "E398: 缺少 \"=\": %s" - -#: ../eval.c:6475 -#, fuzzy, c-format -msgid "E720: Missing colon in Dictionary: %s" -msgstr "E242: 找不到顏色: %s" - -#: ../eval.c:6499 -#, c-format -msgid "E721: Duplicate key in Dictionary: \"%s\"" -msgstr "E721: Dictionary 中出現重複的鍵: \"%s\"" - -#: ../eval.c:6517 -#, fuzzy, c-format -msgid "E722: Missing comma in Dictionary: %s" -msgstr "E242: 找不到顏色: %s" - -#: ../eval.c:6524 -#, fuzzy, c-format -msgid "E723: Missing end of Dictionary '}': %s" -msgstr "E126: 缺少 :endfunction" - -#: ../eval.c:6555 -#, fuzzy -msgid "E724: variable nested too deep for displaying" -msgstr "E22: 巢狀遞迴呼叫太多層" - -#: ../eval.c:7188 -#, fuzzy, c-format -msgid "E740: Too many arguments for function %s" -msgstr "E118: 函式 %s 的引數過多" - -#: ../eval.c:7190 -#, c-format -msgid "E116: Invalid arguments for function %s" -msgstr "E116: 函式 %s 的引數不正確" - -#: ../eval.c:7377 -#, c-format -msgid "E117: Unknown function: %s" -msgstr "E117: 未定義的函式: %s" - -#: ../eval.c:7383 -#, c-format -msgid "E119: Not enough arguments for function: %s" -msgstr "E119: 函式 %s 的引數太少" - -#: ../eval.c:7387 -#, c-format -msgid "E120: Using not in a script context: %s" -msgstr "E120: 不能在 script 本文外使用: %s" - -#: ../eval.c:7391 -#, c-format -msgid "E725: Calling dict function without Dictionary: %s" -msgstr "E725: 調用字典函式但是沒有字典: %s" - -#: ../eval.c:7453 -#, fuzzy -msgid "E808: Number or Float required" -msgstr "E521: = 後需要有數字" - -#: ../eval.c:7503 -#, fuzzy -msgid "add() argument" -msgstr "不正確的參數: " - -#: ../eval.c:7907 -#, fuzzy -msgid "E699: Too many arguments" -msgstr "太多編輯參數" - -#: ../eval.c:8073 -#, fuzzy -msgid "E785: complete() can only be used in Insert mode" -msgstr "E328: 選單只能在其它模式中使用" - -#: ../eval.c:8156 -msgid "&Ok" -msgstr "確定(&O)" - -#: ../eval.c:8676 -#, fuzzy, c-format -msgid "E737: Key already exists: %s" -msgstr "E227: %s 的 mapping 已經存在" - -#: ../eval.c:8692 -msgid "extend() argument" -msgstr "extend() 參數" - -#: ../eval.c:8915 -msgid "map() argument" -msgstr "map() 參數" - -#: ../eval.c:8916 -msgid "filter() argument" -msgstr "filter() 參數" - -#: ../eval.c:9229 -#, c-format -msgid "+-%s%3ld line: " -msgid_plural "+-%s%3ld lines: " -msgstr[0] "+-%s%3ld 行: " - -#: ../eval.c:9291 -#, fuzzy, c-format -msgid "E700: Unknown function: %s" -msgstr "E117: 未定義的函式: %s" - -#: ../eval.c:10729 -msgid "called inputrestore() more often than inputsave()" -msgstr "呼叫 inputrestore() 的次數比 inputsave() 還多" - -#: ../eval.c:10771 -#, fuzzy -msgid "insert() argument" -msgstr "太多編輯參數" - -#: ../eval.c:10841 -#, fuzzy -msgid "E786: Range not allowed" -msgstr "E481: 不可使用範圍指令" - -#: ../eval.c:11140 -#, fuzzy -msgid "E701: Invalid type for len()" -msgstr "E596: 不正確的字型" - -#: ../eval.c:11980 -msgid "E726: Stride is zero" -msgstr "E726: 步長為零" - -#: ../eval.c:11982 -msgid "E727: Start past end" -msgstr "E727: 起始值在終止值後" - -#: ../eval.c:12024 ../eval.c:15297 -msgid "" -msgstr "<空>" - -#: ../eval.c:12282 -msgid "remove() argument" -msgstr "remove() 參數" - -#: ../eval.c:12466 -msgid "E655: Too many symbolic links (cycle?)" -msgstr "E655: 太多層的符號鏈結(symlink) (循環?)" - -#: ../eval.c:12593 -msgid "reverse() argument" -msgstr "reverse() 參數" - -#: ../eval.c:13721 -msgid "sort() argument" -msgstr "sort() 參數" - -#: ../eval.c:13721 -#, fuzzy -msgid "uniq() argument" -msgstr "不正確的參數: " - -#: ../eval.c:13776 -#, fuzzy -msgid "E702: Sort compare function failed" -msgstr "E237: 無法選擇此印表機" - -#: ../eval.c:13806 -msgid "E882: Uniq compare function failed" -msgstr "E882: Uniq 比較函式失敗" - -#: ../eval.c:14085 -msgid "(Invalid)" -msgstr "(不正確)" - -#: ../eval.c:14590 -#, fuzzy -msgid "E677: Error writing temp file" -msgstr "E208: 寫入檔案 \"%s\" 錯誤" - -#: ../eval.c:16159 -msgid "E805: Using a Float as a Number" -msgstr "E805: 將浮點數當做數字使用" - -#: ../eval.c:16162 -msgid "E703: Using a Funcref as a Number" -msgstr "E703: 將函式當做數字使用" - -#: ../eval.c:16170 -msgid "E745: Using a List as a Number" -msgstr "E745: 將列表當做數字使用" - -#: ../eval.c:16173 -msgid "E728: Using a Dictionary as a Number" -msgstr "E728: 將字典當做數字使用" - -#: ../eval.c:16259 -msgid "E729: using Funcref as a String" -msgstr "E729: 將函式當做字串使用" - -#: ../eval.c:16262 -msgid "E730: using List as a String" -msgstr "E730: 將列表當做字串使用" - -#: ../eval.c:16265 -msgid "E731: using Dictionary as a String" -msgstr "E731: 將字典當做字串使用" - -#: ../eval.c:16619 -#, fuzzy, c-format -msgid "E706: Variable type mismatch for: %s" -msgstr "E93: 找到一個以上的 %s" - -#: ../eval.c:16705 -#, fuzzy, c-format -msgid "E795: Cannot delete variable %s" -msgstr "E46: 無法設定唯讀變數 \"%s\"" - -#: ../eval.c:16724 -#, fuzzy, c-format -msgid "E704: Funcref variable name must start with a capital: %s" -msgstr "E128: 函式名稱第一個字母必須大寫: %s" - -#: ../eval.c:16732 -#, c-format -msgid "E705: Variable name conflicts with existing function: %s" -msgstr "E705: 變數名與已有函式名衝突: %s" - -#: ../eval.c:16763 -#, c-format -msgid "E741: Value is locked: %s" -msgstr "E741: 值已鎖定: %s" - -#: ../eval.c:16764 ../eval.c:16769 ../message.c:1839 -msgid "Unknown" -msgstr "未知" - -#: ../eval.c:16768 -#, fuzzy, c-format -msgid "E742: Cannot change value of %s" -msgstr "E284: 不能設定 IC 數值" - -#: ../eval.c:16838 -msgid "E698: variable nested too deep for making a copy" -msgstr "E698: 變數嵌套過深無法複製" - -#: ../eval.c:17249 -#, c-format -msgid "E123: Undefined function: %s" -msgstr "E123: 函式 %s 尚未定義" - -#: ../eval.c:17260 -#, c-format -msgid "E124: Missing '(': %s" -msgstr "E124: 缺少 \"(\": %s" - -#: ../eval.c:17293 -#, fuzzy -msgid "E862: Cannot use g: here" -msgstr "E284: 不能設定 IC 數值" - -#: ../eval.c:17312 -#, c-format -msgid "E125: Illegal argument: %s" -msgstr "E125: 參數不正確: %s" - -#: ../eval.c:17323 -#, fuzzy, c-format -msgid "E853: Duplicate argument name: %s" -msgstr "E154: 標籤(tag) \"%s\" 在檔案 %s 裡重複出現多次" - -#: ../eval.c:17416 -msgid "E126: Missing :endfunction" -msgstr "E126: 缺少 :endfunction" - -#: ../eval.c:17537 -#, fuzzy, c-format -msgid "E707: Function name conflicts with variable: %s" -msgstr "E128: 函式名稱第一個字母必須大寫: %s" - -#: ../eval.c:17549 -#, c-format -msgid "E127: Cannot redefine function %s: It is in use" -msgstr "E127: 函式 %s 正在使用中，無法重新定義" - -#: ../eval.c:17604 -#, fuzzy, c-format -msgid "E746: Function name does not match script file name: %s" -msgstr "E128: 函式名稱第一個字母必須大寫: %s" - -#: ../eval.c:17716 -msgid "E129: Function name required" -msgstr "E129: 需要函式名稱" - -#: ../eval.c:17824 -#, fuzzy, c-format -msgid "E128: Function name must start with a capital or \"s:\": %s" -msgstr "E128: 函式名稱第一個字母必須大寫: %s" - -#: ../eval.c:17833 -#, fuzzy, c-format -msgid "E884: Function name cannot contain a colon: %s" -msgstr "E128: 函式名稱第一個字母必須大寫: %s" - -#: ../eval.c:18336 -#, c-format -msgid "E131: Cannot delete function %s: It is in use" -msgstr "E131: 函式 %s 正在使用中，無法刪除" - -#: ../eval.c:18441 -msgid "E132: Function call depth is higher than 'maxfuncdepth'" -msgstr "E132: 函式遞迴呼叫層數超過 'maxfuncdepth'" - -#: ../eval.c:18568 -#, c-format -msgid "calling %s" -msgstr "呼叫 %s" - -#: ../eval.c:18651 -#, c-format -msgid "%s aborted" -msgstr "%s 被強制中斷執行 " - -#: ../eval.c:18653 -#, c-format -msgid "%s returning #%" -msgstr "%s 傳回值 #% " - -#: ../eval.c:18670 -#, fuzzy, c-format -msgid "%s returning %s" -msgstr "%s 傳回值 \"%s\"" - -#: ../eval.c:18691 ../ex_cmds2.c:2695 -#, c-format -msgid "continuing in %s" -msgstr "繼續: %s" - -#: ../eval.c:18795 -msgid "E133: :return not inside a function" -msgstr "E133: :return 必須在函式裡使用" - -#: ../eval.c:19159 -msgid "" -"\n" -"# global variables:\n" -msgstr "" -"\n" -"# 全域變數:\n" - -#: ../eval.c:19254 msgid "" "\n" "\tLast set from " @@ -1083,2754 +60,6 @@ msgstr "" "\n" "\t上次設定: " -#: ../eval.c:19272 -#, fuzzy -msgid "No old files" -msgstr "沒有引入檔案" - -#: ../ex_cmds.c:122 -#, c-format -msgid "<%s>%s%s %d, Hex %02x, Octal %03o" -msgstr "<%s>%s%s %d, 十六進位 %02x, 八進位 %03o" - -#: ../ex_cmds.c:145 -#, c-format -msgid "> %d, Hex %04x, Octal %o" -msgstr "> %d, 十六進位 %04x, 八進位 %o" - -#: ../ex_cmds.c:146 -#, c-format -msgid "> %d, Hex %08x, Octal %o" -msgstr "> %d, 十六進位 %08x, 八進位 %o" - -#: ../ex_cmds.c:684 -msgid "E134: Move lines into themselves" -msgstr "E134: 無法把行移到它自已內" - -#: ../ex_cmds.c:747 -msgid "1 line moved" -msgstr "已搬移 1 行 " - -#: ../ex_cmds.c:749 -#, c-format -msgid "% lines moved" -msgstr "已搬移 % 行 " - -#: ../ex_cmds.c:1175 -#, c-format -msgid "% lines filtered" -msgstr "已處理 % 行 " - -#: ../ex_cmds.c:1194 -msgid "E135: *Filter* Autocommands must not change current buffer" -msgstr "E135: *Filter* Autocommand 不可以更改緩衝區的內容" - -#: ../ex_cmds.c:1244 -msgid "[No write since last change]\n" -msgstr "[更新後尚未儲存]\n" - -#: ../ex_cmds.c:1424 -#, c-format -msgid "%sviminfo: %s in line: " -msgstr "%sviminfo: %s 在行中: " - -#: ../ex_cmds.c:1431 -msgid "E136: viminfo: Too many errors, skipping rest of file" -msgstr "E136: viminfo: 過多錯誤, 忽略檔案其餘部分" - -#: ../ex_cmds.c:1458 -#, c-format -msgid "Reading viminfo file \"%s\"%s%s%s" -msgstr "讀取 viminfo 檔案 \"%s\"%s%s%s" - -#: ../ex_cmds.c:1460 -msgid " info" -msgstr " 訊息" - -#: ../ex_cmds.c:1461 -msgid " marks" -msgstr " 標記" - -#: ../ex_cmds.c:1462 -#, fuzzy -msgid " oldfiles" -msgstr "沒有引入檔案" - -#: ../ex_cmds.c:1463 -msgid " FAILED" -msgstr " 失敗" - -#. avoid a wait_return for this message, it's annoying -#: ../ex_cmds.c:1541 -#, c-format -msgid "E137: Viminfo file is not writable: %s" -msgstr "E137: Viminfo 檔案無法寫入: %s" - -#: ../ex_cmds.c:1626 -#, c-format -msgid "E138: Can't write viminfo file %s!" -msgstr "E138: 無法寫入 viminfo 檔案 %s !" - -#: ../ex_cmds.c:1635 -#, c-format -msgid "Writing viminfo file \"%s\"" -msgstr "寫入 viminfo 檔案 \"%s\" 中" - -#. Write the info: -#: ../ex_cmds.c:1720 -#, c-format -msgid "# This viminfo file was generated by Vim %s.\n" -msgstr "# 本 viminfo 檔案是由 Vim %s 所產生.\n" - -#: ../ex_cmds.c:1722 -msgid "" -"# You may edit it if you're careful!\n" -"\n" -msgstr "" -"# 如果想要自行修改請特別小心！\n" -"\n" - -#: ../ex_cmds.c:1723 -msgid "# Value of 'encoding' when this file was written\n" -msgstr "# 'encoding' 在此檔建立時的值\n" - -#: ../ex_cmds.c:1800 -msgid "Illegal starting char" -msgstr "無效的起始字元" - -#: ../ex_cmds.c:2162 -msgid "Write partial file?" -msgstr "要寫入部分檔案嗎？" - -#: ../ex_cmds.c:2166 -msgid "E140: Use ! to write partial buffer" -msgstr "E140: 請使用 ! 以寫入部分緩衝區" - -#: ../ex_cmds.c:2281 -#, fuzzy, c-format -msgid "Overwrite existing file \"%s\"?" -msgstr "要覆寫已存在的檔案 \"%.*s\"？" - -#: ../ex_cmds.c:2317 -#, c-format -msgid "Swap file \"%s\" exists, overwrite anyway?" -msgstr "交換文件 \"%s\" 已存在，確實需要覆蓋嗎？" - -#: ../ex_cmds.c:2326 -#, fuzzy, c-format -msgid "E768: Swap file exists: %s (:silent! overrides)" -msgstr "E13: 檔案已經存在 (可用 ! 強制取代)" - -#: ../ex_cmds.c:2381 -#, c-format -msgid "E141: No file name for buffer %" -msgstr "E141: 緩衝區 % 沒有檔案名稱" - -#: ../ex_cmds.c:2412 -msgid "E142: File not written: Writing is disabled by 'write' option" -msgstr "E142: 檔案未寫入，因為 'write' 選項被關閉" - -#: ../ex_cmds.c:2434 -#, fuzzy, c-format -msgid "" -"'readonly' option is set for \"%s\".\n" -"Do you wish to write anyway?" -msgstr "" -"\"%.*s\" 已設定 'readonly' 選項.\n" -"確定要覆寫嗎？" - -#: ../ex_cmds.c:2439 -#, c-format -msgid "" -"File permissions of \"%s\" are read-only.\n" -"It may still be possible to write it.\n" -"Do you wish to try?" -msgstr "" - -#: ../ex_cmds.c:2451 -#, fuzzy, c-format -msgid "E505: \"%s\" is read-only (add ! to override)" -msgstr "是唯讀檔 (請使用 ! 強制執行)" - -#: ../ex_cmds.c:3120 -#, c-format -msgid "E143: Autocommands unexpectedly deleted new buffer %s" -msgstr "E143: Autocommands 意外地刪除新緩衝區 %s" - -#: ../ex_cmds.c:3313 -msgid "E144: non-numeric argument to :z" -msgstr "E144: :z 不接受非數字的參數" - -#: ../ex_cmds.c:3498 -msgid "E146: Regular expressions can't be delimited by letters" -msgstr "E146: Regular expression 無法用字母分隔 (?)" - -#: ../ex_cmds.c:3964 -#, c-format -msgid "replace with %s? (y)es/(n)o/(a)ll/(q)uit/(l)ast/scroll up(^E)/down(^Y)" -msgstr "取代為 %s? (y)es/(n)o/(a)ll/(q)uit/(l)ast/scroll up(^E)/down(^Y)" - -#: ../ex_cmds.c:4379 -msgid "(Interrupted) " -msgstr "(已中斷) " - -#: ../ex_cmds.c:4384 -#, fuzzy -msgid "1 match" -msgstr "; 符合 " - -#: ../ex_cmds.c:4384 -msgid "1 substitution" -msgstr "取代一組 " - -#: ../ex_cmds.c:4387 -#, fuzzy, c-format -msgid "% matches" -msgstr "% 項改變" - -#: ../ex_cmds.c:4388 -#, c-format -msgid "% substitutions" -msgstr "取代 % 組 " - -#: ../ex_cmds.c:4392 -msgid " on 1 line" -msgstr "，範圍：一行 " - -#: ../ex_cmds.c:4395 -#, c-format -msgid " on % lines" -msgstr "，範圍： % 行 " - -#: ../ex_cmds.c:4438 -msgid "E147: Cannot do :global recursive" -msgstr "E147: :global 無法遞迴執行 " - -#: ../ex_cmds.c:4467 -msgid "E148: Regular expression missing from global" -msgstr "E148: 沒有使用過 Regular expression (?)" - -#: ../ex_cmds.c:4508 -#, c-format -msgid "Pattern found in every line: %s" -msgstr "每一行都找不到: %s" - -#: ../ex_cmds.c:4510 -#, fuzzy, c-format -msgid "Pattern not found: %s" -msgstr "找不到" - -#: ../ex_cmds.c:4587 -msgid "" -"\n" -"# Last Substitute String:\n" -"$" -msgstr "" -"\n" -"# 前一組替代字串:\n" -"$" - -#: ../ex_cmds.c:4679 -msgid "E478: Don't panic!" -msgstr "E478: 不要驚慌!" - -#: ../ex_cmds.c:4717 -#, c-format -msgid "E661: No '%s' help for %s" -msgstr "E661: 沒有關於 %s-%s 的說明" - -#: ../ex_cmds.c:4719 -#, c-format -msgid "E149: No help for %s" -msgstr "E149: 沒有 %s 的說明" - -#: ../ex_cmds.c:4751 -#, c-format -msgid "Help file \"%s\" not found" -msgstr "找不到說明檔 \"%s\"" - -#: ../ex_cmds.c:5323 -#, c-format -msgid "E150: Not a directory: %s" -msgstr "E150: %s 不是目錄" - -#: ../ex_cmds.c:5446 -#, c-format -msgid "E152: Cannot open %s for writing" -msgstr "E152: 無法以寫入模式開啟 \"%s\"" - -#: ../ex_cmds.c:5471 -#, c-format -msgid "E153: Unable to open %s for reading" -msgstr "E153: 無法讀取檔案: %s" - -#: ../ex_cmds.c:5500 -#, c-format -msgid "E670: Mix of help file encodings within a language: %s" -msgstr "E670: 同一語言 (%s) 中有混合不同字元編碼的說明檔" - -#: ../ex_cmds.c:5565 -#, fuzzy, c-format -msgid "E154: Duplicate tag \"%s\" in file %s/%s" -msgstr "E154: 標籤(tag) \"%s\" 在檔案 %s 裡重複出現多次" - -#: ../ex_cmds.c:5687 -#, c-format -msgid "E160: Unknown sign command: %s" -msgstr "E160: 未定義的 sign command: %s" - -#: ../ex_cmds.c:5704 -msgid "E156: Missing sign name" -msgstr "E156: 缺少 sign 名稱" - -#: ../ex_cmds.c:5746 -msgid "E612: Too many signs defined" -msgstr "E612: 已定義太多 signs" - -#: ../ex_cmds.c:5813 -#, c-format -msgid "E239: Invalid sign text: %s" -msgstr "E239: 不正確的 sign 文字: %s" - -#: ../ex_cmds.c:5844 ../ex_cmds.c:6035 -#, c-format -msgid "E155: Unknown sign: %s" -msgstr "E155: 不正確的 sign: %s" - -#: ../ex_cmds.c:5877 -msgid "E159: Missing sign number" -msgstr "E159: 缺少 sign number" - -#: ../ex_cmds.c:5971 -#, c-format -msgid "E158: Invalid buffer name: %s" -msgstr "E158: 緩衝區名稱錯誤: %s" - -#: ../ex_cmds.c:6008 -#, c-format -msgid "E157: Invalid sign ID: %" -msgstr "E157: Sign ID 錯誤: %" - -#: ../ex_cmds.c:6066 -msgid " (not supported)" -msgstr " (不支援) " - -#: ../ex_cmds.c:6169 -msgid "[Deleted]" -msgstr "[已刪除]" - -#: ../ex_cmds2.c:139 -msgid "Entering Debug mode. Type \"cont\" to continue." -msgstr "進入除錯模式. 輸入 \"cont\" 以回到正常模式." - -#: ../ex_cmds2.c:143 ../ex_docmd.c:759 -#, c-format -msgid "line %: %s" -msgstr "行 %: %s" - -#: ../ex_cmds2.c:145 -#, c-format -msgid "cmd: %s" -msgstr "cmd: %s" - -#: ../ex_cmds2.c:322 -#, c-format -msgid "Breakpoint in \"%s%s\" line %" -msgstr "\"%s%s\" 中斷點: 第 % 行 " - -#: ../ex_cmds2.c:581 -#, c-format -msgid "E161: Breakpoint not found: %s" -msgstr "E161: 找不到中斷點: %s" - -#: ../ex_cmds2.c:611 -msgid "No breakpoints defined" -msgstr "沒有定義中斷點" - -#: ../ex_cmds2.c:617 -#, c-format -msgid "%3d %s %s line %" -msgstr "%3d %s %s 第 % 行 " - -#: ../ex_cmds2.c:942 -msgid "E750: First use \":profile start {fname}\"" -msgstr "E750: 請先使用 :profile start " - -#: ../ex_cmds2.c:1269 -#, fuzzy, c-format -msgid "Save changes to \"%s\"?" -msgstr "將變動存儲至 \"%.*s\"?" - -#: ../ex_cmds2.c:1271 ../ex_docmd.c:8851 -msgid "Untitled" -msgstr "未命名" - -#: ../ex_cmds2.c:1421 -#, c-format -msgid "E162: No write since last change for buffer \"%s\"" -msgstr "E162: 已更改過緩衝區 \"%s\" 但尚未存檔 (可用 ! 強制執行)" - -#: ../ex_cmds2.c:1480 -msgid "Warning: Entered other buffer unexpectedly (check autocommands)" -msgstr "注意: 已切換到其它緩衝區 (請檢查 Autocommands 有無錯誤)" - -#: ../ex_cmds2.c:1826 -msgid "E163: There is only one file to edit" -msgstr "E163: 只有一個檔案可編輯" - -#: ../ex_cmds2.c:1828 -msgid "E164: Cannot go before first file" -msgstr "E164: 已經在第一個檔案了" - -#: ../ex_cmds2.c:1830 -msgid "E165: Cannot go beyond last file" -msgstr "E165: 已經在最後一個檔案了" - -#: ../ex_cmds2.c:2175 -#, c-format -msgid "E666: compiler not supported: %s" -msgstr "E666: 編譯器不支援: %s" - -#: ../ex_cmds2.c:2257 -#, c-format -msgid "Searching for \"%s\" in \"%s\"" -msgstr "搜尋中: \"%s\" -- \"%s\"" - -#: ../ex_cmds2.c:2284 -#, c-format -msgid "Searching for \"%s\"" -msgstr "搜尋中: \"%s\"" - -#: ../ex_cmds2.c:2307 -#, c-format -msgid "not found in 'runtimepath': \"%s\"" -msgstr "在 'runtimepath' 裡找不到 \"%s\"" - -#: ../ex_cmds2.c:2472 -#, c-format -msgid "Cannot source a directory: \"%s\"" -msgstr "無法執行目錄： \"%s\"" - -#: ../ex_cmds2.c:2518 -#, c-format -msgid "could not source \"%s\"" -msgstr "無法執行 \"%s\"" - -#: ../ex_cmds2.c:2520 -#, c-format -msgid "line %: could not source \"%s\"" -msgstr "第 % 行: 無法執行 \"%s\"" - -#: ../ex_cmds2.c:2535 -#, c-format -msgid "sourcing \"%s\"" -msgstr "執行 \"%s\" 中" - -#: ../ex_cmds2.c:2537 -#, c-format -msgid "line %: sourcing \"%s\"" -msgstr "第 % 行: 結束執行 %s" - -#: ../ex_cmds2.c:2693 -#, c-format -msgid "finished sourcing %s" -msgstr "結束執行 %s" - -#: ../ex_cmds2.c:2765 -#, fuzzy -msgid "modeline" -msgstr "還有一行 " - -#: ../ex_cmds2.c:2767 -#, fuzzy -msgid "--cmd argument" -msgstr "vim [參數] " - -#: ../ex_cmds2.c:2769 -#, fuzzy -msgid "-c argument" -msgstr "vim [參數] " - -#: ../ex_cmds2.c:2771 -msgid "environment variable" -msgstr "環境變數" - -#: ../ex_cmds2.c:2773 -#, fuzzy -msgid "error handler" -msgstr "錯誤與中斷" - -#: ../ex_cmds2.c:3020 -msgid "W15: Warning: Wrong line separator, ^M may be missing" -msgstr "W15: 注意: 錯誤的行分隔字元，可能是少了 ^M" - -#: ../ex_cmds2.c:3139 -msgid "E167: :scriptencoding used outside of a sourced file" -msgstr "E167: 在執行 script 檔案外不可使用 :scriptencoding" - -#: ../ex_cmds2.c:3166 -msgid "E168: :finish used outside of a sourced file" -msgstr "E168: 在執行 script 檔案外不可使用 :finish" - -#: ../ex_cmds2.c:3389 -#, c-format -msgid "Current %slanguage: \"%s\"" -msgstr "目前的 %s語言: \"%s\"" - -#: ../ex_cmds2.c:3404 -#, c-format -msgid "E197: Cannot set language to \"%s\"" -msgstr "E197: 不能設定語言成 \"%s\"" - -#. don't redisplay the window -#. don't wait for return -#: ../ex_docmd.c:387 -msgid "Entering Ex mode. Type \"visual\" to go to Normal mode." -msgstr "進入 Ex 模式. 輸入 \"visua\" 以回到正常模式." - -#: ../ex_docmd.c:428 -msgid "E501: At end-of-file" -msgstr "E501: 已到檔案結尾" - -#: ../ex_docmd.c:513 -msgid "E169: Command too recursive" -msgstr "E169: 命令遞迴層數過多" - -#: ../ex_docmd.c:1006 -#, c-format -msgid "E605: Exception not caught: %s" -msgstr "E605: 未攔截的例外： %s" - -#: ../ex_docmd.c:1085 -msgid "End of sourced file" -msgstr "命令檔結束" - -#: ../ex_docmd.c:1086 -msgid "End of function" -msgstr "函式結尾" - -#: ../ex_docmd.c:1628 -msgid "E464: Ambiguous use of user-defined command" -msgstr "E464: 使用者定義的命令會混淆" - -#: ../ex_docmd.c:1638 -msgid "E492: Not an editor command" -msgstr "E492: 不是編輯器的命令" - -#: ../ex_docmd.c:1729 -msgid "E493: Backwards range given" -msgstr "E493: 指定了向前參考的範圍" - -#: ../ex_docmd.c:1733 -msgid "Backwards range given, OK to swap" -msgstr "指定了向前參考的範圍，OK to swap" - -#. append -#. typed wrong -#: ../ex_docmd.c:1787 -msgid "E494: Use w or w>>" -msgstr "E494: 請使用 w 或 w>>" - -#: ../ex_docmd.c:3454 -msgid "E319: The command is not available in this version" -msgstr "E319: 抱歉, 本命令在此版本中沒有實作" - -#: ../ex_docmd.c:3752 -msgid "E172: Only one file name allowed" -msgstr "E172: 只能有一個檔" - -#: ../ex_docmd.c:4238 -msgid "1 more file to edit. Quit anyway?" -msgstr "還有一個檔案未編輯. 確定要離開？" - -#: ../ex_docmd.c:4242 -#, c-format -msgid "%d more files to edit. Quit anyway?" -msgstr "還有 %d 個檔案未編輯. 確定要離開？" - -#: ../ex_docmd.c:4248 -msgid "E173: 1 more file to edit" -msgstr "E173: 還有一個檔案未編輯 " - -#: ../ex_docmd.c:4250 -#, c-format -msgid "E173: % more files to edit" -msgstr "E173: 還有 % 個檔案未編輯" - -#: ../ex_docmd.c:4320 -msgid "E174: Command already exists: add ! to replace it" -msgstr "E174: 命令已經存在, 請使用 ! 強制重新定義" - -#: ../ex_docmd.c:4432 -msgid "" -"\n" -" Name Args Range Complete Definition" -msgstr "" -"\n" -" 名稱 參數 範圍 完整 定義 " - -#: ../ex_docmd.c:4516 -msgid "No user-defined commands found" -msgstr "找不到使用者定義的命令" - -#: ../ex_docmd.c:4538 -msgid "E175: No attribute specified" -msgstr "E175: 沒有指定的屬性" - -#: ../ex_docmd.c:4583 -msgid "E176: Invalid number of arguments" -msgstr "E176: 不正確的參數數目" - -#: ../ex_docmd.c:4594 -msgid "E177: Count cannot be specified twice" -msgstr "E177: 不能指定兩次數目" - -#: ../ex_docmd.c:4603 -msgid "E178: Invalid default value for count" -msgstr "E178: 數目的預設參數不正確" - -#: ../ex_docmd.c:4625 -#, fuzzy -msgid "E179: argument required for -complete" -msgstr "E179: 指令需要參數才能完成" - -#: ../ex_docmd.c:4635 -#, c-format -msgid "E181: Invalid attribute: %s" -msgstr "E181: 不正確的屬性: %s" - -#: ../ex_docmd.c:4678 -msgid "E182: Invalid command name" -msgstr "E182: 指令名稱不正確" - -#: ../ex_docmd.c:4691 -msgid "E183: User defined commands must start with an uppercase letter" -msgstr "E183: 使用者自定指令必須以大寫字母開始" - -#: ../ex_docmd.c:4696 -#, fuzzy -msgid "E841: Reserved name, cannot be used for user defined command" -msgstr "E464: 使用者定義的命令會混淆" - -#: ../ex_docmd.c:4751 -#, c-format -msgid "E184: No such user-defined command: %s" -msgstr "E184: 沒有使用者自定的命令： %s" - -#: ../ex_docmd.c:5219 -#, c-format -msgid "E180: Invalid complete value: %s" -msgstr "E180: 不完整的值: '%s'" - -#: ../ex_docmd.c:5225 -msgid "E468: Completion argument only allowed for custom completion" -msgstr "E468: 自訂補完時才可補完參數" - -#: ../ex_docmd.c:5231 -msgid "E467: Custom completion requires a function argument" -msgstr "E467: 自訂補完需要函式為參數" - -#: ../ex_docmd.c:5257 -#, fuzzy, c-format -msgid "E185: Cannot find color scheme '%s'" -msgstr "E185: 找不到顏色樣式 %s" - -#: ../ex_docmd.c:5263 -msgid "Greetings, Vim user!" -msgstr "嗨, Vim 使用者！" - -#: ../ex_docmd.c:5431 -#, fuzzy -msgid "E784: Cannot close last tab page" -msgstr "E444: 不能關閉最後一個視窗" - -#: ../ex_docmd.c:5462 -#, fuzzy -msgid "Already only one tab page" -msgstr "已經只剩一個視窗了" - -#: ../ex_docmd.c:6004 -#, fuzzy, c-format -msgid "Tab page %d" -msgstr "第 %d 頁" - -#: ../ex_docmd.c:6295 -msgid "No swap file" -msgstr "無暫存檔" - -#: ../ex_docmd.c:6478 -#, fuzzy -msgid "E747: Cannot change directory, buffer is modified (add ! to override)" -msgstr "E509: 無法建立備份檔 (請使用 ! 強制執行)" - -#: ../ex_docmd.c:6485 -msgid "E186: No previous directory" -msgstr "E186: 沒有前一個目錄" - -#: ../ex_docmd.c:6530 -msgid "E187: Unknown" -msgstr "E187: 無法辦識的標記" - -#: ../ex_docmd.c:6610 -msgid "E465: :winsize requires two number arguments" -msgstr "E465: :winsize 需要兩個參數" - -#: ../ex_docmd.c:6655 -msgid "E188: Obtaining window position not implemented for this platform" -msgstr "E188: 在您的平台上無法獲得視窗位置" - -#: ../ex_docmd.c:6662 -msgid "E466: :winpos requires two number arguments" -msgstr "E466: :winpos 需要兩個參數" - -#: ../ex_docmd.c:7241 -#, fuzzy, c-format -msgid "E739: Cannot create directory: %s" -msgstr "無法執行目錄： \"%s\"" - -#: ../ex_docmd.c:7268 -#, c-format -msgid "E189: \"%s\" exists (add ! to override)" -msgstr "E189: \"%s\" 已存在 (請用 ! 強制執行)" - -#: ../ex_docmd.c:7273 -#, c-format -msgid "E190: Cannot open \"%s\" for writing" -msgstr "E190: 無法以寫入模式開啟 \"%s\"" - -#. set mark -#: ../ex_docmd.c:7294 -msgid "E191: Argument must be a letter or forward/backward quote" -msgstr "E191: 參數必須是英文字母或向前/後的引號" - -#: ../ex_docmd.c:7333 -msgid "E192: Recursive use of :normal too deep" -msgstr "E192: :normal 遞迴層數過深" - -#: ../ex_docmd.c:7807 -msgid "E194: No alternate file name to substitute for '#'" -msgstr "E194: 沒有 '#' 可替代的檔名" - -#: ../ex_docmd.c:7841 -msgid "E495: no autocommand file name to substitute for \"\"" -msgstr "E495: 沒有 Autocommand 檔名以取代 \"\"" - -#: ../ex_docmd.c:7850 -msgid "E496: no autocommand buffer number to substitute for \"\"" -msgstr "E496: 沒有 Autocommand 緩衝區名稱以取代 \"\"" - -#: ../ex_docmd.c:7861 -msgid "E497: no autocommand match name to substitute for \"\"" -msgstr "E497: 沒有 Autocommand 符合名稱以取代 \"\"" - -#: ../ex_docmd.c:7870 -msgid "E498: no :source file name to substitute for \"\"" -msgstr "E498: 沒有 :source 檔名以取代 \"\"" - -#: ../ex_docmd.c:7876 -#, fuzzy -msgid "E842: no line number to use for \"\"" -msgstr "E498: 沒有 :source 檔名以取代 \"\"" - -#: ../ex_docmd.c:7903 -#, fuzzy, c-format -msgid "E499: Empty file name for '%' or '#', only works with \":p:h\"" -msgstr "E499: '%' 或 '#' 指向空檔名，只能用於 \":p:h\"" - -#: ../ex_docmd.c:7905 -msgid "E500: Evaluates to an empty string" -msgstr "E500: 輸入為空字串" - -#: ../ex_docmd.c:8838 -msgid "E195: Cannot open viminfo file for reading" -msgstr "E195: 無法讀取 viminfo" - -#: ../ex_eval.c:464 -msgid "E608: Cannot :throw exceptions with 'Vim' prefix" -msgstr "E608: 不能 :throw 用 'Vim' 開頭的例外" - -#. always scroll up, don't overwrite -#: ../ex_eval.c:496 -#, c-format -msgid "Exception thrown: %s" -msgstr "丟出例外： %s" - -#: ../ex_eval.c:545 -#, c-format -msgid "Exception finished: %s" -msgstr "例外結束： %s" - -#: ../ex_eval.c:546 -#, c-format -msgid "Exception discarded: %s" -msgstr "已丟棄例外： %s" - -#: ../ex_eval.c:588 ../ex_eval.c:634 -#, c-format -msgid "%s, line %" -msgstr "%s, 行 %" - -#. always scroll up, don't overwrite -#: ../ex_eval.c:608 -#, c-format -msgid "Exception caught: %s" -msgstr "發生例外：%s" - -#: ../ex_eval.c:676 -#, c-format -msgid "%s made pending" -msgstr "%s 造成 pending" - -#: ../ex_eval.c:679 -#, c-format -msgid "%s resumed" -msgstr "%s 已回復" - -#: ../ex_eval.c:683 -#, c-format -msgid "%s discarded" -msgstr "%s 已丟棄" - -#: ../ex_eval.c:708 -msgid "Exception" -msgstr "例外" - -#: ../ex_eval.c:713 -msgid "Error and interrupt" -msgstr "錯誤與中斷" - -#: ../ex_eval.c:715 -msgid "Error" -msgstr "錯誤" - -#. if (pending & CSTP_INTERRUPT) -#: ../ex_eval.c:717 -msgid "Interrupt" -msgstr "中斷" - -#: ../ex_eval.c:795 -msgid "E579: :if nesting too deep" -msgstr "E579: :if 層數過深" - -#: ../ex_eval.c:830 -msgid "E580: :endif without :if" -msgstr "E580: :endif 缺少對應的 :if" - -#: ../ex_eval.c:873 -msgid "E581: :else without :if" -msgstr "E581: :else 缺少對應的 :if" - -#: ../ex_eval.c:876 -msgid "E582: :elseif without :if" -msgstr "E582: :elseif 缺少對應的 :if" - -#: ../ex_eval.c:880 -msgid "E583: multiple :else" -msgstr "E583: 多重 :else" - -#: ../ex_eval.c:883 -msgid "E584: :elseif after :else" -msgstr "E584: :elseif 在 :else 之後" - -#: ../ex_eval.c:941 -#, fuzzy -msgid "E585: :while/:for nesting too deep" -msgstr "E585: :while 層數過深" - -#: ../ex_eval.c:1028 -#, fuzzy -msgid "E586: :continue without :while or :for" -msgstr "E586: :continue 缺少對應的 :while" - -#: ../ex_eval.c:1061 -#, fuzzy -msgid "E587: :break without :while or :for" -msgstr "E587: :break 缺少對應的 :while" - -#: ../ex_eval.c:1102 -#, fuzzy -msgid "E732: Using :endfor with :while" -msgstr "E170: 缺少 :endwhile" - -#: ../ex_eval.c:1104 -#, fuzzy -msgid "E733: Using :endwhile with :for" -msgstr "E170: 缺少 :endwhile" - -#: ../ex_eval.c:1247 -msgid "E601: :try nesting too deep" -msgstr "E601: :if 層數過深" - -#: ../ex_eval.c:1317 -msgid "E603: :catch without :try" -msgstr "E603: :catch 沒有 :try" - -#. Give up for a ":catch" after ":finally" and ignore it. -#. * Just parse. -#: ../ex_eval.c:1332 -msgid "E604: :catch after :finally" -msgstr "E604: :catch 在 :finally 之後" - -#: ../ex_eval.c:1451 -msgid "E606: :finally without :try" -msgstr "E606: :finally 沒有 :try" - -#. Give up for a multiple ":finally" and ignore it. -#: ../ex_eval.c:1467 -msgid "E607: multiple :finally" -msgstr "E607: 多重 :finally" - -#: ../ex_eval.c:1571 -msgid "E602: :endtry without :try" -msgstr "E602: :endif 缺少對應的 :if" - -#: ../ex_eval.c:2026 -msgid "E193: :endfunction not inside a function" -msgstr "E193: :endfunction 必須在函式內部使用" - -#: ../ex_getln.c:1643 -#, fuzzy -msgid "E788: Not allowed to edit another buffer now" -msgstr "E48: 不能在 sandbox 裡出現" - -#: ../ex_getln.c:1656 -#, fuzzy -msgid "E811: Not allowed to change buffer information now" -msgstr "E94: 找不到 %s" - -#: ../ex_getln.c:3178 -msgid "tagname" -msgstr "標籤名稱" - -#: ../ex_getln.c:3181 -msgid " kind file\n" -msgstr "類檔案\n" - -#: ../ex_getln.c:4799 -msgid "'history' option is zero" -msgstr "選項 'history' 是零" - -#: ../ex_getln.c:5046 -#, c-format -msgid "" -"\n" -"# %s History (newest to oldest):\n" -msgstr "" -"\n" -"# %s 歷史記錄 (新到舊):\n" - -#: ../ex_getln.c:5047 -msgid "Command Line" -msgstr "命令列" - -#: ../ex_getln.c:5048 -msgid "Search String" -msgstr "搜尋字串" - -#: ../ex_getln.c:5049 -msgid "Expression" -msgstr "運算式" - -#: ../ex_getln.c:5050 -msgid "Input Line" -msgstr "輸入行 " - -#: ../ex_getln.c:5117 -msgid "E198: cmd_pchar beyond the command length" -msgstr "E198: cmd_pchar 超過命令長度" - -#: ../ex_getln.c:5279 -msgid "E199: Active window or buffer deleted" -msgstr "E199: 已刪除掉作用中的視窗或暫存區" - -#: ../file_search.c:203 -msgid "E854: path too long for completion" -msgstr "E854: 補全用的路徑太長了" - -#: ../file_search.c:446 -#, c-format -msgid "" -"E343: Invalid path: '**[number]' must be at the end of the path or be " -"followed by '%s'." -msgstr "E343: 不正確的路徑: '**[number]' 必需要在路徑結尾或要接著 '%s'" - -#: ../file_search.c:1505 -#, c-format -msgid "E344: Can't find directory \"%s\" in cdpath" -msgstr "E344: cdpath 中沒有目錄 \"%s\"" - -#: ../file_search.c:1508 -#, c-format -msgid "E345: Can't find file \"%s\" in path" -msgstr "E345: 在路徑中找不到檔案 \"%s\"" - -#: ../file_search.c:1512 -#, c-format -msgid "E346: No more directory \"%s\" found in cdpath" -msgstr "E346: 在路徑中找不到更多的檔案 \"%s\"" - -#: ../file_search.c:1515 -#, c-format -msgid "E347: No more file \"%s\" found in path" -msgstr "E347: 在路徑中找不到更多的檔案 \"%s\"" - -#: ../fileio.c:137 -#, fuzzy -msgid "E812: Autocommands changed buffer or buffer name" -msgstr "E135: *Filter* Autocommand 不可以更改緩衝區的內容" - -#: ../fileio.c:368 -msgid "Illegal file name" -msgstr "不正確的檔名" - -#: ../fileio.c:395 ../fileio.c:476 ../fileio.c:2543 ../fileio.c:2578 -msgid "is a directory" -msgstr "是目錄" - -#: ../fileio.c:397 -msgid "is not a file" -msgstr "不是檔案" - -#: ../fileio.c:508 ../fileio.c:3522 -msgid "[New File]" -msgstr "[未命名]" - -#: ../fileio.c:511 -msgid "[New DIRECTORY]" -msgstr "[新目錄]" - -#: ../fileio.c:529 ../fileio.c:532 -msgid "[File too big]" -msgstr "[文件太大]" - -#: ../fileio.c:534 -msgid "[Permission Denied]" -msgstr "[權限不足]" - -#: ../fileio.c:653 -msgid "E200: *ReadPre autocommands made the file unreadable" -msgstr "E200: *ReadPre Autocommand 使程式無法讀取此檔" - -#: ../fileio.c:655 -msgid "E201: *ReadPre autocommands must not change current buffer" -msgstr "E201: *Filter* Autocommand 不可以更改緩衝區的內容" - -#: ../fileio.c:672 -msgid "Nvim: Reading from stdin...\n" -msgstr "Vim: 從標準輸入讀取...\n" - -#. Re-opening the original file failed! -#: ../fileio.c:909 -msgid "E202: Conversion made file unreadable!" -msgstr "E202: 轉換錯誤" - -#. fifo or socket -#: ../fileio.c:1782 -msgid "[fifo/socket]" -msgstr "[fifo/socket]" - -#. fifo -#: ../fileio.c:1788 -msgid "[fifo]" -msgstr "[fifo]" - -#. or socket -#: ../fileio.c:1794 -msgid "[socket]" -msgstr "[socket]" - -#. or character special -#: ../fileio.c:1801 -#, fuzzy -msgid "[character special]" -msgstr "一個字元" - -#: ../fileio.c:1815 -msgid "[CR missing]" -msgstr "[缺少CR]'" - -#: ../fileio.c:1819 -msgid "[long lines split]" -msgstr "[分割過長行]" - -#: ../fileio.c:1823 ../fileio.c:3512 -msgid "[NOT converted]" -msgstr "[未轉換]" - -#: ../fileio.c:1826 ../fileio.c:3515 -msgid "[converted]" -msgstr "[已轉換]" - -#: ../fileio.c:1831 -#, fuzzy, c-format -msgid "[CONVERSION ERROR in line %]" -msgstr "[行 % 有不正確的位元]" - -#: ../fileio.c:1835 -#, c-format -msgid "[ILLEGAL BYTE in line %]" -msgstr "[行 % 有不正確的位元]" - -#: ../fileio.c:1838 -msgid "[READ ERRORS]" -msgstr "[讀取錯誤]" - -#: ../fileio.c:2104 -msgid "Can't find temp file for conversion" -msgstr "找不到轉換用的暫存檔" - -#: ../fileio.c:2110 -msgid "Conversion with 'charconvert' failed" -msgstr "字元集轉換錯誤" - -#: ../fileio.c:2113 -msgid "can't read output of 'charconvert'" -msgstr "無法讀取 'charconvert' 的輸出" - -#: ../fileio.c:2437 -#, fuzzy -msgid "E676: No matching autocommands for acwrite buffer" -msgstr "找不到對應的 autocommand" - -#: ../fileio.c:2466 -msgid "E203: Autocommands deleted or unloaded buffer to be written" -msgstr "E203: Autocommand 刪除或釋放了要寫入的緩衝區" - -#: ../fileio.c:2486 -msgid "E204: Autocommand changed number of lines in unexpected way" -msgstr "E204: Autocommand 意外地改變了行號" - -#: ../fileio.c:2548 ../fileio.c:2565 -msgid "is not a file or writable device" -msgstr "不是檔案或可寫入的裝置" - -#: ../fileio.c:2601 -msgid "is read-only (add ! to override)" -msgstr "是唯讀檔 (請使用 ! 強制執行)" - -#: ../fileio.c:2886 -msgid "E506: Can't write to backup file (add ! to override)" -msgstr "E506: 無法寫入備份檔 (請使用 ! 強制執行)" - -#: ../fileio.c:2898 -msgid "E507: Close error for backup file (add ! to override)" -msgstr "E507: 無法關閉備份檔 (請使用 ! 強制執行)" - -#: ../fileio.c:2901 -msgid "E508: Can't read file for backup (add ! to override)" -msgstr "E508: 無法讀取檔案以供備份 (請使用 ! 強制執行)" - -#: ../fileio.c:2923 -msgid "E509: Cannot create backup file (add ! to override)" -msgstr "E509: 無法建立備份檔 (請使用 ! 強制執行)" - -#: ../fileio.c:3008 -msgid "E510: Can't make backup file (add ! to override)" -msgstr "E510: 無法製作備份檔 (請使用 ! 強制執行)" - -#. Can't write without a tempfile! -#: ../fileio.c:3121 -msgid "E214: Can't find temp file for writing" -msgstr "E214: 找不到寫入用的暫存檔" - -#: ../fileio.c:3134 -msgid "E213: Cannot convert (add ! to write without conversion)" -msgstr "E213: 無法轉換 (請使用 ! 強制不轉換寫入)" - -#: ../fileio.c:3169 -msgid "E166: Can't open linked file for writing" -msgstr "E166: 無法以寫入模式開啟連結檔案" - -#: ../fileio.c:3173 -msgid "E212: Can't open file for writing" -msgstr "E212: 無法以寫入模式開啟" - -#: ../fileio.c:3363 -msgid "E667: Fsync failed" -msgstr "E667: Fsync 命令執行失敗" - -#: ../fileio.c:3398 -msgid "E512: Close failed" -msgstr "E512: 關閉失敗" - -#: ../fileio.c:3436 -#, fuzzy -msgid "E513: write error, conversion failed (make 'fenc' empty to override)" -msgstr "E513: 無法寫入 -- 轉換失敗" - -#: ../fileio.c:3441 -#, c-format -msgid "" -"E513: write error, conversion failed in line % (make 'fenc' empty to " -"override)" -msgstr "E513: 寫入錯誤，轉換失敗 (請將 'fenc' 置空以強制執行)" - -#: ../fileio.c:3448 -msgid "E514: write error (file system full?)" -msgstr "E514: 寫入錯誤 (檔案系統已滿？)" - -#: ../fileio.c:3506 -msgid " CONVERSION ERROR" -msgstr "轉換錯誤" - -#: ../fileio.c:3509 -#, fuzzy, c-format -msgid " in line %;" -msgstr "行 %" - -#: ../fileio.c:3519 -msgid "[Device]" -msgstr "[裝置]" - -#: ../fileio.c:3522 -msgid "[New]" -msgstr "[新]" - -#: ../fileio.c:3535 -msgid " [a]" -msgstr "[a]" - -#: ../fileio.c:3535 -msgid " appended" -msgstr " 已附加" - -#: ../fileio.c:3537 -msgid " [w]" -msgstr "[w]" - -#: ../fileio.c:3537 -msgid " written" -msgstr " 已寫入" - -#: ../fileio.c:3579 -msgid "E205: Patchmode: can't save original file" -msgstr "E205: Patch 模式: 無法儲存原始檔案" - -#: ../fileio.c:3602 -msgid "E206: patchmode: can't touch empty original file" -msgstr "E206: Patch 模式: 無法變更空的原始檔案" - -#: ../fileio.c:3616 -msgid "E207: Can't delete backup file" -msgstr "E207: 無法刪除備份檔" - -#: ../fileio.c:3672 -msgid "" -"\n" -"WARNING: Original file may be lost or damaged\n" -msgstr "" -"\n" -"警告: 原始檔案流失或損壞\n" - -#: ../fileio.c:3675 -msgid "don't quit the editor until the file is successfully written!" -msgstr "在檔案正確寫入前請勿離開編輯器!" - -#: ../fileio.c:3795 -msgid "[dos]" -msgstr "[dos]" - -#: ../fileio.c:3795 -msgid "[dos format]" -msgstr "[dos 格式]" - -#: ../fileio.c:3801 -msgid "[mac]" -msgstr "[mac]" - -#: ../fileio.c:3801 -msgid "[mac format]" -msgstr "[mac 格式]" - -#: ../fileio.c:3807 -msgid "[unix]" -msgstr "[unix]" - -#: ../fileio.c:3807 -msgid "[unix format]" -msgstr "[unix 格式]" - -#: ../fileio.c:3831 -msgid "1 line, " -msgstr "1 行, " - -#: ../fileio.c:3833 -#, c-format -msgid "% lines, " -msgstr "% 行, " - -#: ../fileio.c:3836 -msgid "1 character" -msgstr "一個字元" - -#: ../fileio.c:3838 -#, c-format -msgid "% characters" -msgstr "%個字元" - -#: ../fileio.c:3849 -msgid "[noeol]" -msgstr "[noeol]" - -#: ../fileio.c:3849 -msgid "[Incomplete last line]" -msgstr "[結尾行不完整]" - -#. don't overwrite messages here -#. must give this prompt -#. don't use emsg() here, don't want to flush the buffers -#: ../fileio.c:3865 -msgid "WARNING: The file has been changed since reading it!!!" -msgstr "警告: 本檔案自上次讀入後已變動!!!" - -#: ../fileio.c:3867 -msgid "Do you really want to write to it" -msgstr "確定要寫入嗎" - -#: ../fileio.c:4648 -#, c-format -msgid "E208: Error writing to \"%s\"" -msgstr "E208: 寫入檔案 \"%s\" 錯誤" - -#: ../fileio.c:4655 -#, c-format -msgid "E209: Error closing \"%s\"" -msgstr "E209: 關閉檔案 \"%s\" 錯誤" - -#: ../fileio.c:4657 -#, c-format -msgid "E210: Error reading \"%s\"" -msgstr "E210: 讀取檔案 \"%s\" 錯誤" - -#: ../fileio.c:4883 -msgid "E246: FileChangedShell autocommand deleted buffer" -msgstr "E246: FileChangedShell autocommand 刪除緩衝區" - -#: ../fileio.c:4894 -#, fuzzy, c-format -msgid "E211: File \"%s\" no longer available" -msgstr "E211: 警告: 檔案 \"%s\" 已經不存在" - -#: ../fileio.c:4906 -#, c-format -msgid "" -"W12: Warning: File \"%s\" has changed and the buffer was changed in Vim as " -"well" -msgstr "W12: 警告: 檔案 \"%s\" 自上次讀入後已變動, 而且編輯中的緩衝區也更動了" - -#: ../fileio.c:4907 -#, fuzzy -msgid "See \":help W12\" for more info." -msgstr "進一步說明請見 \":help W11\"。" - -#: ../fileio.c:4910 -#, c-format -msgid "W11: Warning: File \"%s\" has changed since editing started" -msgstr "W11: 警告: 檔案 \"%s\" 自上次讀入後已變動" - -#: ../fileio.c:4911 -msgid "See \":help W11\" for more info." -msgstr "進一步說明請見 \":help W11\"。" - -#: ../fileio.c:4914 -#, c-format -msgid "W16: Warning: Mode of file \"%s\" has changed since editing started" -msgstr "W16: 警告: 檔案 \"%s\" 的權限與上次讀入時不一樣 (有變動過)" - -#: ../fileio.c:4915 -#, fuzzy -msgid "See \":help W16\" for more info." -msgstr "進一步說明請見 \":help W11\"。" - -# 'mode' seems better as translated to 'permission'? -#: ../fileio.c:4927 -#, c-format -msgid "W13: Warning: File \"%s\" has been created after editing started" -msgstr "W13: 警告: 檔案 \"%s\" 在開始編輯後又被建立了" - -#: ../fileio.c:4947 -msgid "Warning" -msgstr "警告" - -#: ../fileio.c:4948 -msgid "" -"&OK\n" -"&Load File" -msgstr "" -"確定(&O)\n" -"載入檔案(&L)" - -#: ../fileio.c:5065 -#, c-format -msgid "E462: Could not prepare for reloading \"%s\"" -msgstr "E462: 無法準備重新載入 \"%s\"" - -#: ../fileio.c:5078 -#, c-format -msgid "E321: Could not reload \"%s\"" -msgstr "E321: 無法重新載入 \"%s\"" - -#: ../fileio.c:5601 -msgid "--Deleted--" -msgstr "--已刪除--" - -#: ../fileio.c:5732 -#, c-format -msgid "auto-removing autocommand: %s " -msgstr "" - -#. the group doesn't exist -#: ../fileio.c:5772 -#, c-format -msgid "E367: No such group: \"%s\"" -msgstr "E367: 無此群組: \"%s\"" - -#: ../fileio.c:5897 -#, c-format -msgid "E215: Illegal character after *: %s" -msgstr "E215: * 後面有不正確的字元: %s" - -#: ../fileio.c:5905 -#, c-format -msgid "E216: No such event: %s" -msgstr "E216: 無此事件: %s" - -#: ../fileio.c:5907 -#, c-format -msgid "E216: No such group or event: %s" -msgstr "E216: 無此群組或事件: %s" - -#. Highlight title -#: ../fileio.c:6090 -msgid "" -"\n" -"--- Autocommands ---" -msgstr "" -"\n" -"--- Autocommands ---" - -#: ../fileio.c:6293 -#, fuzzy, c-format -msgid "E680: : invalid buffer number " -msgstr "緩衝區號碼錯誤" - -#: ../fileio.c:6370 -msgid "E217: Can't execute autocommands for ALL events" -msgstr "E217: 無法對所有事件執行 autocommand" - -#: ../fileio.c:6393 -msgid "No matching autocommands" -msgstr "找不到對應的 autocommand" - -#: ../fileio.c:6831 -msgid "E218: autocommand nesting too deep" -msgstr "E218: autocommand 層數過深" - -#: ../fileio.c:7143 -#, c-format -msgid "%s Autocommands for \"%s\"" -msgstr "%s Autocommands: \"%s\"" - -#: ../fileio.c:7149 -#, c-format -msgid "Executing %s" -msgstr "執行 %s" - -#: ../fileio.c:7211 -#, c-format -msgid "autocommand %s" -msgstr "autocommand %s" - -#: ../fileio.c:7795 -msgid "E219: Missing {." -msgstr "E219: 缺少 {." - -#: ../fileio.c:7797 -msgid "E220: Missing }." -msgstr "E220: 缺少 }." - -#: ../fold.c:93 -msgid "E490: No fold found" -msgstr "E490: 找不到任何 fold" - -#: ../fold.c:544 -msgid "E350: Cannot create fold with current 'foldmethod'" -msgstr "E350: 無法在目前的 'foldmethod' 下建立 fold" - -#: ../fold.c:546 -msgid "E351: Cannot delete fold with current 'foldmethod'" -msgstr "E351: 無法在目前的 'foldmethod' 下刪除 fold" - -#: ../fold.c:1784 -#, c-format -msgid "+--%3ld lines folded " -msgstr "+--已 fold %3ld 行 " - -#. buffer has already been read -#: ../getchar.c:273 -msgid "E222: Add to read buffer" -msgstr "E222: 加入讀取緩衝區中" - -#: ../getchar.c:2040 -msgid "E223: recursive mapping" -msgstr "E223: 遞迴 mapping" - -#: ../getchar.c:2849 -#, c-format -msgid "E224: global abbreviation already exists for %s" -msgstr "E224: %s 已經有全域 abbreviation 了" - -#: ../getchar.c:2852 -#, c-format -msgid "E225: global mapping already exists for %s" -msgstr "E225: %s 已經有全域 mapping 了" - -#: ../getchar.c:2952 -#, c-format -msgid "E226: abbreviation already exists for %s" -msgstr "E226: %s 已經有 abbreviation 了" - -#: ../getchar.c:2955 -#, c-format -msgid "E227: mapping already exists for %s" -msgstr "E227: %s 的 mapping 已經存在" - -#: ../getchar.c:3008 -msgid "No abbreviation found" -msgstr "找不到 abbreviation" - -#: ../getchar.c:3010 -msgid "No mapping found" -msgstr "沒有這個 mapping 對應" - -#: ../getchar.c:3974 -msgid "E228: makemap: Illegal mode" -msgstr "E228: makemap: 不正確的模式" - -#. key value of 'cedit' option -#. type of cmdline window or 0 -#. result of cmdline window or 0 -#: ../globals.h:924 -msgid "--No lines in buffer--" -msgstr "--緩衝區無資料--" - -#. -#. * The error messages that can be shared are included here. -#. * Excluded are errors that are only used once and debugging messages. -#. -#: ../globals.h:996 -msgid "E470: Command aborted" -msgstr "E470: 命令被強制中斷執行 " - -#: ../globals.h:997 -msgid "E471: Argument required" -msgstr "E471: 需要指令參數" - -#: ../globals.h:998 -msgid "E10: \\ should be followed by /, ? or &" -msgstr "E10: \\ 後面應該有 / ? 或 &" - -#: ../globals.h:1000 -msgid "E11: Invalid in command-line window; executes, CTRL-C quits" -msgstr "E11: 不能在命令列視窗中使用。執行，CTRL-C 離開" - -#: ../globals.h:1002 -msgid "E12: Command not allowed from exrc/vimrc in current dir or tag search" -msgstr "E12: exrc/vimrc 裡的指令無法執行 " - -#: ../globals.h:1003 -msgid "E171: Missing :endif" -msgstr "E171: 缺少 :endif" - -#: ../globals.h:1004 -msgid "E600: Missing :endtry" -msgstr "E600: 缺少 :endtry" - -#: ../globals.h:1005 -msgid "E170: Missing :endwhile" -msgstr "E170: 缺少 :endwhile" - -#: ../globals.h:1006 -#, fuzzy -msgid "E170: Missing :endfor" -msgstr "E171: 缺少 :endif" - -#: ../globals.h:1007 -msgid "E588: :endwhile without :while" -msgstr "E588: :endwhile 缺少對應的 :while" - -#: ../globals.h:1008 -#, fuzzy -msgid "E588: :endfor without :for" -msgstr "E580: :endif 缺少對應的 :if" - -#: ../globals.h:1009 -msgid "E13: File exists (add ! to override)" -msgstr "E13: 檔案已經存在 (可用 ! 強制取代)" - -#: ../globals.h:1010 -msgid "E472: Command failed" -msgstr "E472: 命令執行失敗" - -#: ../globals.h:1011 -msgid "E473: Internal error" -msgstr "E473: 內部錯誤" - -#: ../globals.h:1012 -msgid "Interrupted" -msgstr "已中斷" - -#: ../globals.h:1013 -msgid "E14: Invalid address" -msgstr "E14: 不正確的位址" - -#: ../globals.h:1014 -msgid "E474: Invalid argument" -msgstr "E474: 不正確的參數" - -#: ../globals.h:1015 -#, c-format -msgid "E475: Invalid argument: %s" -msgstr "E475: 不正確的參數: %s" - -#: ../globals.h:1016 -#, c-format -msgid "E15: Invalid expression: %s" -msgstr "E15: 不正確的運算式: %s" - -#: ../globals.h:1017 -msgid "E16: Invalid range" -msgstr "E16: 不正確的範圍" - -#: ../globals.h:1018 -msgid "E476: Invalid command" -msgstr "E476: 不正確的命令" - -#: ../globals.h:1019 -#, c-format -msgid "E17: \"%s\" is a directory" -msgstr "E17: \"%s\" 是目錄" - -#: ../globals.h:1020 -#, fuzzy -msgid "E900: Invalid job id" -msgstr "E49: 錯誤的捲動大小" - -#: ../globals.h:1021 -msgid "E901: Job table is full" -msgstr "E901: 任務表已經滿" - -#: ../globals.h:1024 -#, c-format -msgid "E364: Library call failed for \"%s()\"" -msgstr "E364: 呼叫函式庫 \"%s\"() 失敗" - -#: ../globals.h:1026 -msgid "E19: Mark has invalid line number" -msgstr "E19: 標記的行號錯誤" - -#: ../globals.h:1027 -msgid "E20: Mark not set" -msgstr "E20: 沒有設定標記" - -#: ../globals.h:1029 -msgid "E21: Cannot make changes, 'modifiable' is off" -msgstr "E21: 因為 'modifiable' 選項是關閉的，所以不能修改" - -#: ../globals.h:1030 -msgid "E22: Scripts nested too deep" -msgstr "E22: 巢狀遞迴呼叫太多層" - -#: ../globals.h:1031 -msgid "E23: No alternate file" -msgstr "E23: 沒有替代的檔案" - -#: ../globals.h:1032 -msgid "E24: No such abbreviation" -msgstr "E24: 沒有這個 abbreviation 對應" - -#: ../globals.h:1033 -msgid "E477: No ! allowed" -msgstr "E477: 不可使用 '!'" - -#: ../globals.h:1035 -msgid "E25: Nvim does not have a built-in GUI" -msgstr "E25: 因為編譯時沒有加入圖型界面的程式碼，所以無法使用圖型界面" - -#: ../globals.h:1036 -#, c-format -msgid "E28: No such highlight group name: %s" -msgstr "E28: 沒有名為 '%s' 的 highlight group" - -#: ../globals.h:1037 -msgid "E29: No inserted text yet" -msgstr "E29: 還沒有插入文字過" - -#: ../globals.h:1038 -msgid "E30: No previous command line" -msgstr "E30: 沒有前一項命令" - -#: ../globals.h:1039 -msgid "E31: No such mapping" -msgstr "E31: 沒有這個 mapping 對應" - -#: ../globals.h:1040 -msgid "E479: No match" -msgstr "E479: 找不到" - -#: ../globals.h:1041 -#, c-format -msgid "E480: No match: %s" -msgstr "E480: 找不到: %s" - -#: ../globals.h:1042 -msgid "E32: No file name" -msgstr "E32: 沒有檔名" - -#: ../globals.h:1044 -msgid "E33: No previous substitute regular expression" -msgstr "E33: 沒有前一個搜尋/取代的命令" - -#: ../globals.h:1045 -msgid "E34: No previous command" -msgstr "E34: 沒有前一個命令" - -#: ../globals.h:1046 -msgid "E35: No previous regular expression" -msgstr "E35: 沒有前一個搜尋指令" - -#: ../globals.h:1047 -msgid "E481: No range allowed" -msgstr "E481: 不可使用範圍指令" - -#: ../globals.h:1048 -msgid "E36: Not enough room" -msgstr "E36: 沒有足夠的空間" - -#: ../globals.h:1049 -#, c-format -msgid "E482: Can't create file %s" -msgstr "E482: 不能建立檔案 %s" - -#: ../globals.h:1050 -msgid "E483: Can't get temp file name" -msgstr "E483: 無法得知暫存檔名" - -#: ../globals.h:1051 -#, c-format -msgid "E484: Can't open file %s" -msgstr "E484: 無法開啟檔案 %s" - -#: ../globals.h:1052 -#, c-format -msgid "E485: Can't read file %s" -msgstr "E485: 無法讀取檔案 %s" - -#: ../globals.h:1054 -msgid "E37: No write since last change (add ! to override)" -msgstr "E37: 已更改過檔案但尚未存檔 (可用 ! 強制執行)" - -#: ../globals.h:1055 -#, fuzzy -msgid "E37: No write since last change" -msgstr "[更新後尚未儲存]\n" - -#: ../globals.h:1056 -msgid "E38: Null argument" -msgstr "E38: 空的 (Null) 參數" - -#: ../globals.h:1057 -msgid "E39: Number expected" -msgstr "E39: 應該要有數字" - -#: ../globals.h:1058 -#, c-format -msgid "E40: Can't open errorfile %s" -msgstr "E40: 無法開啟錯誤檔案 %s" - -#: ../globals.h:1059 -msgid "E41: Out of memory!" -msgstr "E41: 記憶體不足!" - -#: ../globals.h:1060 -msgid "Pattern not found" -msgstr "找不到" - -#: ../globals.h:1061 -#, c-format -msgid "E486: Pattern not found: %s" -msgstr "E486: 找不到 %s" - -#: ../globals.h:1062 -msgid "E487: Argument must be positive" -msgstr "E487: 參數應該是正數" - -#: ../globals.h:1064 -msgid "E459: Cannot go back to previous directory" -msgstr "E459: 無法回到前一個目錄" - -#: ../globals.h:1066 -msgid "E42: No Errors" -msgstr "E42: 沒有錯誤" - -#: ../globals.h:1067 -msgid "E776: No location list" -msgstr "E776: 沒有位置列表" - -#: ../globals.h:1068 -msgid "E43: Damaged match string" -msgstr "E43: 符合字串有問題" - -#: ../globals.h:1069 -msgid "E44: Corrupted regexp program" -msgstr "E44: regexp 有問題" - -#: ../globals.h:1071 -msgid "E45: 'readonly' option is set (add ! to override)" -msgstr "E45: 有設定 'readonly' 選項(唯讀) (可用 ! 強制執行)" - -#: ../globals.h:1073 -#, fuzzy, c-format -msgid "E46: Cannot change read-only variable \"%s\"" -msgstr "E46: 無法設定唯讀變數 \"%s\"" - -#: ../globals.h:1075 -#, fuzzy, c-format -msgid "E794: Cannot set variable in the sandbox: \"%s\"" -msgstr "E46: 無法設定唯讀變數 \"%s\"" - -#: ../globals.h:1076 -msgid "E47: Error while reading errorfile" -msgstr "E47: 讀取錯誤檔案失敗" - -#: ../globals.h:1078 -msgid "E48: Not allowed in sandbox" -msgstr "E48: 不能在 sandbox 裡出現" - -#: ../globals.h:1080 -msgid "E523: Not allowed here" -msgstr "E523: 這裡不可使用" - -#: ../globals.h:1082 -msgid "E359: Screen mode setting not supported" -msgstr "E359: 不支援設定螢幕模式" - -#: ../globals.h:1083 -msgid "E49: Invalid scroll size" -msgstr "E49: 錯誤的捲動大小" - -#: ../globals.h:1084 -msgid "E91: 'shell' option is empty" -msgstr "E91: 'E71: 選項 'shell' 未設定" - -#: ../globals.h:1085 -msgid "E255: Couldn't read in sign data!" -msgstr "E255: 無法讀取 sign data!" - -#: ../globals.h:1086 -msgid "E72: Close error on swap file" -msgstr "E72: 暫存檔關閉錯誤" - -#: ../globals.h:1087 -msgid "E73: tag stack empty" -msgstr "E73: 標籤堆疊已空" - -#: ../globals.h:1088 -msgid "E74: Command too complex" -msgstr "E74: 命令太複雜" - -#: ../globals.h:1089 -msgid "E75: Name too long" -msgstr "E75: 名字太長" - -#: ../globals.h:1090 -msgid "E76: Too many [" -msgstr "E76: 太多 [" - -#: ../globals.h:1091 -msgid "E77: Too many file names" -msgstr "E77: 太多檔名" - -#: ../globals.h:1092 -msgid "E488: Trailing characters" -msgstr "E488: 你輸入了多餘的字元" - -#: ../globals.h:1093 -msgid "E78: Unknown mark" -msgstr "E78: 無法辦識的標記" - -#: ../globals.h:1094 -msgid "E79: Cannot expand wildcards" -msgstr "E79: 無法展開萬用字元" - -#: ../globals.h:1096 -msgid "E591: 'winheight' cannot be smaller than 'winminheight'" -msgstr "E591: 'winheight' 不能比 'winminheight' 更少" - -#: ../globals.h:1098 -msgid "E592: 'winwidth' cannot be smaller than 'winminwidth'" -msgstr "E592: 'winwidth' 不能比 'winminwidth' 更少" - -#: ../globals.h:1099 -msgid "E80: Error while writing" -msgstr "E80: 寫入錯誤" - -#: ../globals.h:1100 -msgid "Zero count" -msgstr "數到零 (?)" - -#: ../globals.h:1101 -msgid "E81: Using not in a script context" -msgstr "E81: 不能在 script 本文外使用." - -#: ../globals.h:1102 -#, fuzzy, c-format -msgid "E685: Internal error: %s" -msgstr "E473: 內部錯誤" - -#: ../globals.h:1104 -msgid "E363: pattern uses more memory than 'maxmempattern'" -msgstr "E363: 表達式的內存超出 'maxmempattern'" - -#: ../globals.h:1105 -#, fuzzy -msgid "E749: empty buffer" -msgstr "E279: 不是 SNiFF+ 的緩衝區" - -#: ../globals.h:1108 -#, fuzzy -msgid "E682: Invalid search pattern or delimiter" -msgstr "E383: 錯誤的搜尋字串: %s" - -#: ../globals.h:1109 -msgid "E139: File is loaded in another buffer" -msgstr "E139: 您在另一個緩衝區也載入了這個檔案" - -#: ../globals.h:1110 -#, fuzzy, c-format -msgid "E764: Option '%s' is not set" -msgstr "E236: \"%s\" 不是固定寬度字型" - -#: ../globals.h:1111 -#, fuzzy -msgid "E850: Invalid register name" -msgstr "E354: 暫存器名稱錯誤: '%s'" - -#: ../globals.h:1114 -msgid "search hit TOP, continuing at BOTTOM" -msgstr "已搜尋到檔案開頭；再從結尾繼續搜尋" - -#: ../globals.h:1115 -msgid "search hit BOTTOM, continuing at TOP" -msgstr "已搜尋到檔案結尾；再從開頭繼續搜尋" - -#: ../if_cscope.c:85 -msgid "Add a new database" -msgstr "新增資料庫" - -#: ../if_cscope.c:87 -msgid "Query for a pattern" -msgstr "輸入 pattern" - -#: ../if_cscope.c:89 -msgid "Show this message" -msgstr "顯示此訊息" - -#: ../if_cscope.c:91 -msgid "Kill a connection" -msgstr "結束連線" - -#: ../if_cscope.c:93 -msgid "Reinit all connections" -msgstr "重設所有連線" - -#: ../if_cscope.c:95 -msgid "Show connections" -msgstr "顯示連線" - -#: ../if_cscope.c:101 -#, c-format -msgid "E560: Usage: cs[cope] %s" -msgstr "E560: 用法: cs[cope] %s" - -#: ../if_cscope.c:225 -msgid "This cscope command does not support splitting the window.\n" -msgstr "這個 cscope 命令不支援分割螢幕\n" - -#: ../if_cscope.c:266 -msgid "E562: Usage: cstag " -msgstr "E562: 用法: cstag <識別字ident>" - -#: ../if_cscope.c:313 -msgid "E257: cstag: tag not found" -msgstr "E257: cstag: 找不到 tag" - -#: ../if_cscope.c:461 -#, c-format -msgid "E563: stat(%s) error: %d" -msgstr "E563: stat(%s) 錯誤: %d" - -#: ../if_cscope.c:551 -#, c-format -msgid "E564: %s is not a directory or a valid cscope database" -msgstr "E564: %s 不是目錄或 cscope 資料庫" - -#: ../if_cscope.c:566 -#, c-format -msgid "Added cscope database %s" -msgstr "新增 cscope 資料庫 %s" - -#: ../if_cscope.c:616 -#, c-format -msgid "E262: error reading cscope connection %" -msgstr "E262: 讀取 cscope 連線 % 錯誤" - -#: ../if_cscope.c:711 -msgid "E561: unknown cscope search type" -msgstr "E561: 未知的 cscope 搜尋形態" - -#: ../if_cscope.c:752 ../if_cscope.c:789 -msgid "E566: Could not create cscope pipes" -msgstr "E566: 無法建立與 cscope 的 pipe 連線" - -#: ../if_cscope.c:767 -msgid "E622: Could not fork for cscope" -msgstr "E622: 無法 fork 以執行 cscope " - -#: ../if_cscope.c:849 -#, fuzzy -msgid "cs_create_connection setpgid failed" -msgstr "cs_create_connection 執行失敗" - -#: ../if_cscope.c:853 ../if_cscope.c:889 -msgid "cs_create_connection exec failed" -msgstr "cs_create_connection 執行失敗" - -#: ../if_cscope.c:863 ../if_cscope.c:902 -msgid "cs_create_connection: fdopen for to_fp failed" -msgstr "cs_create_connection: fdopen 失敗 (to_fp)" - -#: ../if_cscope.c:865 ../if_cscope.c:906 -msgid "cs_create_connection: fdopen for fr_fp failed" -msgstr "cs_create_connection: fdopen 失敗 (fr_fp)" - -#: ../if_cscope.c:890 -msgid "E623: Could not spawn cscope process" -msgstr "E623: 無法執行 cscope " - -#: ../if_cscope.c:932 -msgid "E567: no cscope connections" -msgstr "E567: 沒有 cscope 連線" - -#: ../if_cscope.c:1009 -#, c-format -msgid "E469: invalid cscopequickfix flag %c for %c" -msgstr "E469: cscopequickfix 的 flac %c (%c) 不正確" - -#: ../if_cscope.c:1058 -#, c-format -msgid "E259: no matches found for cscope query %s of %s" -msgstr "E259: 找不到符合 cscope 的搜尋 %s / %s" - -#: ../if_cscope.c:1142 -msgid "cscope commands:\n" -msgstr "cscope 命令:\n" - -#: ../if_cscope.c:1150 -#, fuzzy, c-format -msgid "%-5s: %s%*s (Usage: %s)" -msgstr "%-5s: %-30s (用法: %s)" - -#: ../if_cscope.c:1155 -msgid "" -"\n" -" a: Find assignments to this symbol\n" -" c: Find functions calling this function\n" -" d: Find functions called by this function\n" -" e: Find this egrep pattern\n" -" f: Find this file\n" -" g: Find this definition\n" -" i: Find files #including this file\n" -" s: Find this C symbol\n" -" t: Find this text string\n" -msgstr "" -"\n" -" a: 搜索對此符號的賦值\n" -" c: 搜索調用此函式的函式\n" -" d: 搜索此函式調用的函式\n" -" e: 搜索此 egrep 模式\n" -" f: 搜索此文件\n" -" g: 搜索此定義\n" -" i: 搜索包含此文件的文件\n" -" s: 搜索此 C 符号\n" -" t: 搜索此文本字串\n" - -#: ../if_cscope.c:1226 -msgid "E568: duplicate cscope database not added" -msgstr "E568: 重複的 cscope 資料庫未被加入" - -#: ../if_cscope.c:1335 -#, c-format -msgid "E261: cscope connection %s not found" -msgstr "E261: 找不到 cscope 連線 %s" - -#: ../if_cscope.c:1364 -#, c-format -msgid "cscope connection %s closed" -msgstr "cscope 連線 %s 已關閉" - -#. should not reach here -#: ../if_cscope.c:1486 -msgid "E570: fatal error in cs_manage_matches" -msgstr "E570: cs_manage_matches 嚴重錯誤" - -#: ../if_cscope.c:1693 -#, c-format -msgid "Cscope tag: %s" -msgstr "Cscope 標籤(tag): %s" - -#: ../if_cscope.c:1711 -msgid "" -"\n" -" # line" -msgstr "" -"\n" -" # 行 " - -#: ../if_cscope.c:1713 -msgid "filename / context / line\n" -msgstr "檔名 / 內文 / 行號\n" - -#: ../if_cscope.c:1809 -#, c-format -msgid "E609: Cscope error: %s" -msgstr "E609: Csope 錯誤: %s" - -#: ../if_cscope.c:2053 -msgid "All cscope databases reset" -msgstr "重設所有 cscope 資料庫" - -#: ../if_cscope.c:2123 -msgid "no cscope connections\n" -msgstr "沒有 cscope 連線\n" - -#: ../if_cscope.c:2126 -msgid " # pid database name prepend path\n" -msgstr " # pid 資料庫名稱 prepend path\n" - -#: ../main.c:144 -#, fuzzy -msgid "Unknown option argument" -msgstr "不正確的選項" - -#: ../main.c:146 -msgid "Too many edit arguments" -msgstr "太多編輯參數" - -#: ../main.c:148 -msgid "Argument missing after" -msgstr "缺少必要的參數:" - -#: ../main.c:150 -#, fuzzy -msgid "Garbage after option argument" -msgstr "無法辨認此選項後的命令: " - -#: ../main.c:152 -msgid "Too many \"+command\", \"-c command\" or \"--cmd command\" arguments" -msgstr "太多 \"+command\" 、 \"-c command\" 或 \"--cmd command\" 參數" - -#: ../main.c:154 -msgid "Invalid argument for" -msgstr "不正確的參數: " - -#: ../main.c:294 -#, c-format -msgid "%d files to edit\n" -msgstr "還有 %d 個檔案等待編輯\n" - -#: ../main.c:1342 -msgid "Attempt to open script file again: \"" -msgstr "試圖再次開啟 script 檔: \"" - -#: ../main.c:1350 -msgid "Cannot open for reading: \"" -msgstr "無法開啟以讀取: \"" - -#: ../main.c:1393 -msgid "Cannot open for script output: \"" -msgstr "無法開啟為 script 輸出: \"" - -#: ../main.c:1622 -msgid "Vim: Warning: Output is not to a terminal\n" -msgstr "Vim: 注意: 輸出不是終端機(螢幕)\n" - -#: ../main.c:1624 -msgid "Vim: Warning: Input is not from a terminal\n" -msgstr "Vim: 注意: 輸入不是終端機(鍵盤)\n" - -#. just in case.. -#: ../main.c:1891 -msgid "pre-vimrc command line" -msgstr "vimrc 前命令列" - -#: ../main.c:1964 -#, c-format -msgid "E282: Cannot read from \"%s\"" -msgstr "E282: 無法讀取檔案 \"%s\"" - -#: ../main.c:2149 -msgid "" -"\n" -"More info with: \"vim -h\"\n" -msgstr "" -"\n" -"查詢更多資訊請執行: \"vim -h\"\n" - -#: ../main.c:2178 -msgid "[file ..] edit specified file(s)" -msgstr "[檔案 ..] 編輯指定的檔案" - -#: ../main.c:2179 -msgid "- read text from stdin" -msgstr "- 從標準輸入(stdin)讀取檔案" - -#: ../main.c:2180 -msgid "-t tag edit file where tag is defined" -msgstr "-t tag 編輯時使用指定的 tag" - -#: ../main.c:2181 -msgid "-q [errorfile] edit file with first error" -msgstr "-q [errorfile] 編輯時載入第一個錯誤" - -#: ../main.c:2187 -msgid "" -"\n" -"\n" -"Usage:" -msgstr "" -"\n" -"\n" -" 用法:" - -#: ../main.c:2189 -msgid " vim [arguments] " -msgstr "vim [參數] " - -#: ../main.c:2193 -msgid "" -"\n" -" or:" -msgstr "" -"\n" -" 或:" - -#: ../main.c:2196 -msgid "" -"\n" -"\n" -"Arguments:\n" -msgstr "" -"\n" -"\n" -"參數:\n" - -#: ../main.c:2197 -msgid "--\t\t\tOnly file names after this" -msgstr "--\t\t\t只有在這之後的檔案" - -#: ../main.c:2199 -msgid "--literal\t\tDon't expand wildcards" -msgstr "--literal\t\t不展開萬用字元" - -#: ../main.c:2201 -msgid "-v\t\t\tVi mode (like \"vi\")" -msgstr "-v\t\t\tVi 模式 (同 \"vi\")" - -#: ../main.c:2202 -msgid "-e\t\t\tEx mode (like \"ex\")" -msgstr "-e\t\t\tEx 模式 (同 \"ex\")" - -#: ../main.c:2203 -msgid "-E\t\t\tImproved Ex mode" -msgstr "" - -#: ../main.c:2204 -msgid "-s\t\t\tSilent (batch) mode (only for \"ex\")" -msgstr "-s\t\t\t安靜 (batch) 模式 (只能與 \"ex\" 一起使用)" - -#: ../main.c:2205 -msgid "-d\t\t\tDiff mode (like \"vimdiff\")" -msgstr "-d\t\t\tDiff 模式 (同 \"vimdiff\", 可迅速比較兩檔案不同處)" - -#: ../main.c:2206 -msgid "-y\t\t\tEasy mode (like \"evim\", modeless)" -msgstr "-y\t\t\t簡易模式 (同 \"evim\", modeless)" - -#: ../main.c:2207 -msgid "-R\t\t\tReadonly mode (like \"view\")" -msgstr "-R\t\t\t唯讀模式 (同 \"view\")" - -#: ../main.c:2209 -msgid "-m\t\t\tModifications (writing files) not allowed" -msgstr "-m\t\t\t不可修改 (寫入檔案)" - -#: ../main.c:2210 -msgid "-M\t\t\tModifications in text not allowed" -msgstr "-M\t\t\t不可修改文字" - -#: ../main.c:2211 -msgid "-b\t\t\tBinary mode" -msgstr "-b\t\t\t二進位模式" - -#: ../main.c:2212 -msgid "-l\t\t\tLisp mode" -msgstr "-l\t\t\tLisp 模式" - -#: ../main.c:2213 -msgid "-C\t\t\tCompatible with Vi: 'compatible'" -msgstr "-C\t\t\t'compatible' 傳統 Vi 相容模式" - -#: ../main.c:2214 -msgid "-N\t\t\tNot fully Vi compatible: 'nocompatible'" -msgstr "-N\t\t\t'nocompatible' 不完全與傳統 Vi 相容，可使用 Vim 加強能力" - -#: ../main.c:2215 -msgid "-V[N][fname]\t\tBe verbose [level N] [log messages to fname]" -msgstr "-V[N][fname]\t\t詳細 [level N] [log messages to fname]" - -#: ../main.c:2216 -msgid "-D\t\t\tDebugging mode" -msgstr "-D\t\t\t除錯模式" - -#: ../main.c:2217 -msgid "-n\t\t\tNo swap file, use memory only" -msgstr "-n\t\t\t不使用暫存檔, 只使用記憶體" - -#: ../main.c:2218 -msgid "-r\t\t\tList swap files and exit" -msgstr "-r\t\t\t列出暫存檔後離開" - -#: ../main.c:2219 -msgid "-r (with file name)\tRecover crashed session" -msgstr "-r (加檔名) \t修復上次損毀的資料(Recover crashed session)" - -#: ../main.c:2220 -msgid "-L\t\t\tSame as -r" -msgstr "-L\t\t\t同 -r" - -#: ../main.c:2221 -msgid "-A\t\t\tstart in Arabic mode" -msgstr "-A\t\t\t啟動為 Arabic 模式" - -#: ../main.c:2222 -msgid "-H\t\t\tStart in Hebrew mode" -msgstr "-H\t\t\t啟動為 Hebrew 模式" - -#: ../main.c:2223 -msgid "-F\t\t\tStart in Farsi mode" -msgstr "-F\t\t\t啟動為 Farsi 模式" - -#: ../main.c:2224 -msgid "-T \tSet terminal type to " -msgstr "-T \t設定終端機為 " - -#: ../main.c:2225 -msgid "-u \t\tUse instead of any .vimrc" -msgstr "-u \t\t使用 取代任何 .vimrc" - -#: ../main.c:2226 -msgid "--noplugin\t\tDon't load plugin scripts" -msgstr "--noplugin\t\t不載入任何 plugin" - -#: ../main.c:2227 -#, fuzzy -msgid "-p[N]\t\tOpen N tab pages (default: one for each file)" -msgstr "-o[N]\t\t開啟 N 個視窗 (預設是每個檔案一個)" - -#: ../main.c:2228 -msgid "-o[N]\t\tOpen N windows (default: one for each file)" -msgstr "-o[N]\t\t開啟 N 個視窗 (預設是每個檔案一個)" - -#: ../main.c:2229 -msgid "-O[N]\t\tLike -o but split vertically" -msgstr "-O[N]\t\t同 -o 但使用垂直分割" - -#: ../main.c:2230 -msgid "+\t\t\tStart at end of file" -msgstr "+\t\t\t啟動後跳到檔案結尾" - -#: ../main.c:2231 -msgid "+\t\tStart at line " -msgstr "+\t\t啟動後跳到第 行 " - -#: ../main.c:2232 -msgid "--cmd \tExecute before loading any vimrc file" -msgstr "--cmd \t載入任何 vimrc 前執行 " - -#: ../main.c:2233 -msgid "-c \t\tExecute after loading the first file" -msgstr "-c \t\t載入第一個檔案後執行 " - -#: ../main.c:2235 -msgid "-S \t\tSource file after loading the first file" -msgstr "-S \t\t載入第一個檔案後載入 Session 檔 " - -#: ../main.c:2236 -msgid "-s \tRead Normal mode commands from file " -msgstr "-s \t從 讀入一般模式命令" - -#: ../main.c:2237 -msgid "-w \tAppend all typed commands to file " -msgstr "-w \t對檔案 附加(append)所有輸入的命令" - -#: ../main.c:2238 -msgid "-W \tWrite all typed commands to file " -msgstr "-W \t對檔案 寫入所有輸入的命令" - -#: ../main.c:2240 -msgid "--startuptime \tWrite startup timing messages to " -msgstr "--startuptime \t將啟動時間寫入到文件 " - -#: ../main.c:2242 -msgid "-i \t\tUse instead of .viminfo" -msgstr "-i \t\t使用 而非 .viminfo" - -#: ../main.c:2243 -msgid "-h or --help\tPrint Help (this message) and exit" -msgstr "-h 或 --help\t印出說明(也就是本訊息)後離開" - -#: ../main.c:2244 -msgid "--version\t\tPrint version information and exit" -msgstr "--version\t\t印出版本資訊後離開" - -#: ../mark.c:676 -msgid "No marks set" -msgstr "沒有設定標記 (mark)" - -#: ../mark.c:678 -#, c-format -msgid "E283: No marks matching \"%s\"" -msgstr "E283: 找不到符合 \"%s\" 的標記(mark)" - -#. Highlight title -#: ../mark.c:687 -msgid "" -"\n" -"mark line col file/text" -msgstr "" -"\n" -"標記 行號 欄 檔案/文字" - -#. Highlight title -#: ../mark.c:789 -msgid "" -"\n" -" jump line col file/text" -msgstr "" -"\n" -" jump 行號 欄 檔案/文字" - -#. Highlight title -#: ../mark.c:831 -msgid "" -"\n" -"change line col text" -msgstr "" -"\n" -"改變 行號 欄 文字" - -#: ../mark.c:1238 -msgid "" -"\n" -"# File marks:\n" -msgstr "" -"\n" -"# 檔案標記:\n" - -#. Write the jumplist with -' -#: ../mark.c:1271 -msgid "" -"\n" -"# Jumplist (newest first):\n" -msgstr "" -"\n" -"# Jumplist (由新到舊):\n" - -#: ../mark.c:1352 -msgid "" -"\n" -"# History of marks within files (newest to oldest):\n" -msgstr "" -"\n" -"# 檔案內 Mark 記錄 (由新到舊):\n" - -#: ../mark.c:1431 -msgid "Missing '>'" -msgstr "缺少對應的 '>'" - -#: ../memfile.c:426 -msgid "E293: block was not locked" -msgstr "E293: 區塊未被鎖定" - -#: ../memfile.c:799 -msgid "E294: Seek error in swap file read" -msgstr "E294: 暫存檔讀取錯誤" - -#: ../memfile.c:803 -msgid "E295: Read error in swap file" -msgstr "E295: 暫存檔讀取錯誤" - -#: ../memfile.c:849 -msgid "E296: Seek error in swap file write" -msgstr "E296: 暫存檔寫入錯誤" - -#: ../memfile.c:865 -msgid "E297: Write error in swap file" -msgstr "E297: 暫存檔寫入錯誤" - -#: ../memfile.c:1036 -msgid "E300: Swap file already exists (symlink attack?)" -msgstr "E300: 暫存檔已經存在! (小心符號連結的安全漏洞!?)" - -#: ../memline.c:318 -msgid "E298: Didn't get block nr 0?" -msgstr "E298: 找不到區塊 0?" - -#: ../memline.c:361 -msgid "E298: Didn't get block nr 1?" -msgstr "E298: 找不到區塊 1?" - -#: ../memline.c:377 -msgid "E298: Didn't get block nr 2?" -msgstr "E298: 找不到區塊 2?" - -#. could not (re)open the swap file, what can we do???? -#: ../memline.c:465 -msgid "E301: Oops, lost the swap file!!!" -msgstr "E301: 噢噢, 暫存檔不見了!!!" - -#: ../memline.c:477 -msgid "E302: Could not rename swap file" -msgstr "E302: 無法改變暫存檔的名稱" - -#: ../memline.c:554 -#, c-format -msgid "E303: Unable to open swap file for \"%s\", recovery impossible" -msgstr "E303: 無法開啟暫存檔 \"%s\", 不可能修復了" - -#: ../memline.c:666 -#, fuzzy -msgid "E304: ml_upd_block0(): Didn't get block 0??" -msgstr "E304: ml_timestamp: 找不到區塊 0??" - -#. no swap files found -#: ../memline.c:830 -#, c-format -msgid "E305: No swap file found for %s" -msgstr "E305: 找不到 %s 的暫存檔" - -#: ../memline.c:839 -msgid "Enter number of swap file to use (0 to quit): " -msgstr "請選擇你要使用的暫存檔 (按0 離開): " - -#: ../memline.c:879 -#, c-format -msgid "E306: Cannot open %s" -msgstr "E306: 無法開啟 %s" - -#: ../memline.c:897 -msgid "Unable to read block 0 from " -msgstr "無法讀取區塊 0:" - -#: ../memline.c:900 -msgid "" -"\n" -"Maybe no changes were made or Vim did not update the swap file." -msgstr "" -"\n" -"可能是你沒做過任何修改或是 Vim 還來不及更新暫存檔." - -#: ../memline.c:909 -msgid " cannot be used with this version of Vim.\n" -msgstr " 無法在本版本的 Vim 中使用.\n" - -#: ../memline.c:911 -msgid "Use Vim version 3.0.\n" -msgstr "使用 Vim 3.0。\n" - -#: ../memline.c:916 -#, c-format -msgid "E307: %s does not look like a Vim swap file" -msgstr "E307: %s 看起來不像是 Vim 暫存檔" - -#: ../memline.c:922 -msgid " cannot be used on this computer.\n" -msgstr " 無法在這臺電腦上使用.\n" - -#: ../memline.c:924 -msgid "The file was created on " -msgstr "本檔案建立於 " - -#: ../memline.c:928 -msgid "" -",\n" -"or the file has been damaged." -msgstr "" -",\n" -"或是這檔案已經損毀。" - -#: ../memline.c:945 -msgid " has been damaged (page size is smaller than minimum value).\n" -msgstr "已损坏（頁面大小小於最小值）。\n" - -#: ../memline.c:974 -#, c-format -msgid "Using swap file \"%s\"" -msgstr "使用暫存檔 \"%s\"" - -#: ../memline.c:980 -#, c-format -msgid "Original file \"%s\"" -msgstr "原始檔 \"%s\"" - -#: ../memline.c:995 -msgid "E308: Warning: Original file may have been changed" -msgstr "E308: 警告: 原始檔案可能已經修改過了" - -#: ../memline.c:1061 -#, c-format -msgid "E309: Unable to read block 1 from %s" -msgstr "E309: 無法從 %s 讀取區塊 1" - -#: ../memline.c:1065 -msgid "???MANY LINES MISSING" -msgstr "???缺少太多行 " - -#: ../memline.c:1076 -msgid "???LINE COUNT WRONG" -msgstr "???行號錯誤" - -#: ../memline.c:1082 -msgid "???EMPTY BLOCK" -msgstr "???空的 BLOCK" - -#: ../memline.c:1103 -msgid "???LINES MISSING" -msgstr "???找不到一些行 " - -#: ../memline.c:1128 -#, c-format -msgid "E310: Block 1 ID wrong (%s not a .swp file?)" -msgstr "E310: 區塊 1 ID 錯誤 (%s 不是暫存檔?)" - -#: ../memline.c:1133 -msgid "???BLOCK MISSING" -msgstr "???找不到BLOCK" - -#: ../memline.c:1147 -msgid "??? from here until ???END lines may be messed up" -msgstr "??? 從這裡到 ???END 的內容可能有問題" - -#: ../memline.c:1164 -msgid "??? from here until ???END lines may have been inserted/deleted" -msgstr "??? 從這裡到 ???END 的內容可能被刪除/插入過" - -# do not translate -#: ../memline.c:1181 -msgid "???END" -msgstr "???END" - -#: ../memline.c:1238 -msgid "E311: Recovery Interrupted" -msgstr "E311: 修復已中斷" - -#: ../memline.c:1243 -msgid "" -"E312: Errors detected while recovering; look for lines starting with ???" -msgstr "E312: 修復時發生錯誤; 請注意開頭為 ??? 的行 " - -#: ../memline.c:1245 -msgid "See \":help E312\" for more information." -msgstr "詳細說明請見 \":help E312\"" - -#: ../memline.c:1249 -msgid "Recovery completed. You should check if everything is OK." -msgstr "復原完成. 請確定一切正常." - -#: ../memline.c:1251 -msgid "" -"\n" -"(You might want to write out this file under another name\n" -msgstr "" -"\n" -"(你可能會想要把這個檔案另存別的檔名，\n" - -#: ../memline.c:1252 -#, fuzzy -msgid "and run diff with the original file to check for changes)" -msgstr "再執行 diff 與原檔案比較以檢查是否有改變)\n" - -#: ../memline.c:1254 -msgid "Recovery completed. Buffer contents equals file contents." -msgstr "" - -#: ../memline.c:1255 -#, fuzzy -msgid "" -"\n" -"You may want to delete the .swp file now.\n" -"\n" -msgstr "" -"(D)直接刪除 .swp 暫存檔\n" -"\n" - -#. use msg() to start the scrolling properly -#: ../memline.c:1327 -msgid "Swap files found:" -msgstr "找到以下的暫存檔:" - -#: ../memline.c:1446 -msgid " In current directory:\n" -msgstr " 在目前的目錄:\n" - -#: ../memline.c:1448 -msgid " Using specified name:\n" -msgstr " Using specified name:\n" - -#: ../memline.c:1450 -msgid " In directory " -msgstr " 在目錄 " - -#: ../memline.c:1465 -msgid " -- none --\n" -msgstr " -- 無 --\n" - -#: ../memline.c:1527 -msgid " owned by: " -msgstr " 擁有者: " - -#: ../memline.c:1529 -msgid " dated: " -msgstr " 日期: " - -#: ../memline.c:1532 ../memline.c:3231 -msgid " dated: " -msgstr " 日期: " - -#: ../memline.c:1548 -msgid " [from Vim version 3.0]" -msgstr " [從 Vim 版本 3.0]" - -#: ../memline.c:1550 -msgid " [does not look like a Vim swap file]" -msgstr " [不像 Vim 的暫存檔]" - -#: ../memline.c:1552 -msgid " file name: " -msgstr " 檔名: " - -#: ../memline.c:1558 msgid "" "\n" " modified: " @@ -3838,47 +67,6 @@ msgstr "" "\n" " 修改過: " -#: ../memline.c:1559 -msgid "YES" -msgstr "是" - -#: ../memline.c:1559 -msgid "no" -msgstr "否" - -#: ../memline.c:1562 -msgid "" -"\n" -" user name: " -msgstr "" -"\n" -" 使用者: " - -#: ../memline.c:1568 -msgid " host name: " -msgstr " 主機名稱: " - -#: ../memline.c:1570 -msgid "" -"\n" -" host name: " -msgstr "" -"\n" -" 主機名稱: " - -#: ../memline.c:1575 -msgid "" -"\n" -" process ID: " -msgstr "" -"\n" -" process ID: " - -#: ../memline.c:1579 -msgid " (still running)" -msgstr " (執行中)" - -#: ../memline.c:1586 msgid "" "\n" " [not usable on this computer]" @@ -3886,149 +74,594 @@ msgstr "" "\n" " [無法在本電腦上使用]" -#: ../memline.c:1590 -msgid " [cannot be read]" -msgstr " [無法讀取]" +msgid "" +"\n" +" host name: " +msgstr "" +"\n" +" 主機名稱: " -#: ../memline.c:1593 -msgid " [cannot be opened]" -msgstr " [無法開啟]" +msgid "" +"\n" +" user name: " +msgstr "" +"\n" +" 使用者: " -#: ../memline.c:1698 -msgid "E313: Cannot preserve, there is no swap file" -msgstr "E313: 無法保留, 不使用暫存檔" +msgid "" +"\n" +" process ID: " +msgstr "" +"\n" +" process ID: " -#: ../memline.c:1747 -msgid "File preserved" -msgstr "檔案已保留" +#, fuzzy +msgid "" +"\n" +" Name Args Address Complete Definition" +msgstr "" +"\n" +" 名稱 參數 範圍 完整 定義 " -#: ../memline.c:1749 -msgid "E314: Preserve failed" -msgstr "E314: 保留失敗" +msgid "" +"\n" +" # TO tag FROM line in file/text" +msgstr "" +"\n" +" # 到 tag 從 行 在 檔案/文字" -#: ../memline.c:1819 -#, c-format -msgid "E315: ml_get: invalid lnum: %" -msgstr "E315: ml_get: 錯誤的 lnum: %" +msgid "" +"\n" +" jump line col file/text" +msgstr "" +"\n" +" jump 行號 欄 檔案/文字" -#: ../memline.c:1851 -#, c-format -msgid "E316: ml_get: cannot find line %" -msgstr "E316: ml_get: 找不到第 % 行 " - -#: ../memline.c:2236 -msgid "E317: pointer block id wrong 3" -msgstr "E317: 指標區塊 id 錯誤 3" - -#: ../memline.c:2311 -msgid "stack_idx should be 0" -msgstr "stack_idx 應該是 0" - -#: ../memline.c:2369 -msgid "E318: Updated too many blocks?" -msgstr "E318: 更新太多區塊?" - -#: ../memline.c:2511 -msgid "E317: pointer block id wrong 4" -msgstr "E317: 指標區塊 id 錯誤 4" - -#: ../memline.c:2536 -msgid "deleted block 1?" -msgstr "刪除區塊 1?" - -#: ../memline.c:2707 -#, c-format -msgid "E320: Cannot find line %" -msgstr "E320: 找不到第 % 行 " - -#: ../memline.c:2916 -msgid "E317: pointer block id wrong" -msgstr "E317: 指標區塊 id 錯誤" - -#: ../memline.c:2930 -msgid "pe_line_count is zero" -msgstr "pe_line_count 為零" - -#: ../memline.c:2955 -#, c-format -msgid "E322: line number out of range: % past the end" -msgstr "E322: 行號超出範圍: % 超過結尾" - -#: ../memline.c:2959 -#, c-format -msgid "E323: line count wrong in block %" -msgstr "E323: 區塊 % 行數錯誤" - -#: ../memline.c:2999 -msgid "Stack size increases" -msgstr "堆疊大小增加" - -#: ../memline.c:3038 -msgid "E317: pointer block id wrong 2" -msgstr "E317: 指標區塊 id 錯 2" - -#: ../memline.c:3070 -#, c-format -msgid "E773: Symlink loop for \"%s\"" -msgstr "E773: \"%s\" 符號鏈接出現循環" - -#: ../memline.c:3221 -msgid "E325: ATTENTION" -msgstr "E325: 注意" - -#: ../memline.c:3222 -msgid "Found a swap file by the name \"" -msgstr "找到暫存檔 \"" - -#: ../memline.c:3226 -msgid "While opening file \"" -msgstr "在開啟檔案 \"" - -#: ../memline.c:3239 -msgid " NEWER than swap file!\n" -msgstr " 比暫存檔更新!\n" - -#: ../memline.c:3244 #, fuzzy msgid "" "\n" "(1) Another program may be editing the same file. If this is the case,\n" " be careful not to end up with two different instances of the same\n" -" file when making changes." +" file when making changes. Quit, or continue with caution.\n" msgstr "" "\n" "(1) 可能有另一個程式也在編輯同一個檔案.\n" " 如果是這樣，請小心不要兩邊一起寫入，不然你的努力都會負諸流水。\n" -#: ../memline.c:3245 -#, fuzzy -msgid " Quit, or continue with caution.\n" -msgstr " 離開，或是繼續編輯。\n" - -#: ../memline.c:3246 -#, fuzzy -msgid "(2) An edit session for this file crashed.\n" +msgid "" +"\n" +"(You might want to write out this file under another name\n" msgstr "" "\n" -"(2) 前次編輯此檔時當機\n" +"(你可能會想要把這個檔案另存別的檔名，\n" + +msgid "" +"\n" +"--- Autocommands ---" +msgstr "" +"\n" +"--- Autocommands ---" + +msgid "" +"\n" +"--- Global option values ---" +msgstr "" +"\n" +"--- Global 選項值 ---" + +msgid "" +"\n" +"--- Local option values ---" +msgstr "" +"\n" +"--- Local 選項值 ---" + +msgid "" +"\n" +"--- Menus ---" +msgstr "" +"\n" +"--- 選單 ---" + +msgid "" +"\n" +"--- Options ---" +msgstr "" +"\n" +"--- 選項 ---" + +msgid "" +"\n" +"--- Signs ---" +msgstr "" +"\n" +"--- 符號 ---" + +msgid "" +"\n" +"--- Syntax items ---" +msgstr "" +"\n" +"--- 語法項目 ---" + +msgid "" +"\n" +"--- Syntax sync items ---" +msgstr "" +"\n" +"--- 語法同步物件 (Syntax sync items) ---" + +#, fuzzy +msgid "" +"\n" +"Maybe no changes were made or Nvim did not update the swap file." +msgstr "" +"\n" +"可能是你沒做過任何修改或是 Vim 還來不及更新暫存檔." + +#, fuzzy, c-format +msgid "" +"\n" +"More info with \"" +msgstr "" +"\n" +"查詢更多資訊請執行: \"vim -h\"\n" + +msgid "" +"\n" +"Note: process STILL RUNNING: " +msgstr "" + +#, fuzzy, c-format +msgid "" +"\n" +"Options:\n" +msgstr "" +"\n" +"--- 選項 ---" + +#, c-format +msgid "" +"\n" +"See \":help startup-options\" for all options.\n" +msgstr "" + +msgid "" +"\n" +"Type Name Content" +msgstr "" + +msgid "" +"\n" +"WARNING: Original file may be lost or damaged\n" +msgstr "" +"\n" +"警告: 原始檔案流失或損壞\n" + +#, fuzzy +msgid "" +"\n" +"You may want to delete the .swp file now." +msgstr "" +"\n" +"您現在可以刪除 .swp 檔案。\n" +"\n" + +msgid "" +"\n" +"change line col text" +msgstr "" +"\n" +"改變 行號 欄 文字" + +msgid "" +"\n" +"shell failed to start: " +msgstr "" + +msgid "" +"\n" +"syncing on items" +msgstr "" +"\n" +"同步化中:" + +msgid " dated: " +msgstr " 日期: " + +msgid " owned by: " +msgstr " 擁有者: " + +msgid " [cannot be opened]" +msgstr " [無法開啟]" + +msgid " [cannot be read]" +msgstr " [無法讀取]" + +#, fuzzy +msgid " [does not look like a Nvim swap file]" +msgstr " [不像 Vim 的暫存檔]" + +msgid " [from Vim version 3.0]" +msgstr " [從 Vim 版本 3.0]" + +msgid " [garbled strings (not nul terminated)]" +msgstr "" + +msgid " file name: " +msgstr " 檔名: " + +#, fuzzy +msgid " CANNOT BE FOUND" +msgstr " 找不到" + +msgid " NEWER than swap file!\n" +msgstr " 比暫存檔更新!\n" -#: ../memline.c:3247 msgid " If this is the case, use \":recover\" or \"nvim -r " msgstr " 如果是這樣, 請用 \":recover\" 或 \"nvim -r" -#: ../memline.c:3249 -msgid "" -"\"\n" -" to recover the changes (see \":help recovery\").\n" -msgstr "" -"\"\n" -" 來救回修改資料 (詳細說明請看 \":help recovery\").\n" - -#: ../memline.c:3250 msgid " If you did this already, delete the swap file \"" msgstr " 如果該救的都已經救了, 請直接刪除此暫存檔 \"" -#: ../memline.c:3252 +#, fuzzy +msgid " line=%" +msgstr "" +"\n" +" # 行 " + +msgid " dated: " +msgstr " 日期: " + +msgid " host name: " +msgstr " 主機名稱: " + +msgid " system vimrc file: \"" +msgstr " 系統 vimrc 設定檔: \"" + +msgid " (Already listed)" +msgstr " (已列出)" + +#, fuzzy, c-format +msgid " +, -c Execute after config and first file\n" +msgstr "-c \t\t載入第一個檔案後執行 " + +#, fuzzy, c-format +msgid " -- Only file names after this\n" +msgstr "--\t\t\t只有在這之後的檔案" + +#, c-format +msgid " --api-info Write msgpack-encoded API metadata to stdout\n" +msgstr "" + +#, c-format +msgid "" +" --clean \"Factory defaults\" (skip user config and plugins, " +"shada)\n" +msgstr "" + +#, fuzzy, c-format +msgid " --cmd Execute before any config\n" +msgstr "--cmd \t載入任何 vimrc 前執行 " + +#, c-format +msgid " --embed Use stdin/stdout as a msgpack-rpc channel\n" +msgstr "" + +#, c-format +msgid " --headless Don't start a user interface\n" +msgstr "" + +#, c-format +msgid " --listen
Serve RPC API from this address\n" +msgstr "" + +#, c-format +msgid " --remote[-subcommand] Execute commands remotely on a server\n" +msgstr "" + +#, c-format +msgid " --server
Connect to this Nvim server\n" +msgstr "" + +#, fuzzy, c-format +msgid " --startuptime Write startup timing messages to \n" +msgstr "--startuptime \t將啟動時間寫入到文件 " + +#, fuzzy, c-format +msgid "" +" -O[N] Open N vertical windows (default: one per file)\n" +msgstr "-o[N]\t\t開啟 N 個視窗 (預設是每個檔案一個)" + +#, fuzzy, c-format +msgid " -R Read-only (view) mode\n" +msgstr " 兩種模式 " + +#, fuzzy, c-format +msgid " -S Source after loading the first file\n" +msgstr "-S \t\t載入第一個檔案後載入 Session 檔 " + +#, c-format +msgid " -V[N][file] Verbose [level][file]\n" +msgstr "" + +#, fuzzy, c-format +msgid " -d Diff mode\n" +msgstr " 兩種模式 " + +#, c-format +msgid " -es, -Es Silent (batch) mode\n" +msgstr "" + +#, c-format +msgid " -h, --help Print this help message\n" +msgstr "" + +#, c-format +msgid " -i Use this shada file\n" +msgstr "" + +#, c-format +msgid " -l