Problem:
Not easy for a user to tell ":restart" to "run this command(s) after restarting".
Solution:
All ":restart" args following the optional +cmd arg are treated as a big cmdline that is passed as a "-c" CLI arg when restarting nvim.
Problem:
":restart" always executes ":qall" to exit the server.
Solution:
Support ":restart +cmd" so the user can control the command
used to exit the server.
Co-authored-by: Justin M. Keyes <justinkz@gmail.com>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Many terminals now include support for OSC 52 in their Primary Device
Attributes (DA1) response. This is preferable to using XTGETTCAP because
DA1 is _much_ more broadly supported.
Add '^' and '$' around the pattern. This makes it less likely to make
mistakes of when writing tests with {MATCH:}, as most such tests have
text before and after {MATCH:}.
Uses the undocumented "error_exit" UI event for a different purpose:
When :detach is used on the server, send an "error_exit" with 0 `status`
to indicate that the server shouldn't wait for client exit.
Problem: A 'winblend' window floating over uninitialized cells loses
its highlighting.
Solution: Return the front attribute for uninitialized background cells.
Problem:
Developing/troubleshooting plugins has friction because "restarting"
Nvim requires quitting and manually starting again. #32484
Solution:
- Implement a `:restart` command which emits `restart` UI event.
- Handle the `restart` UI event in the builtin TUI client: stop the
`nvim --embed` server, start a new one, and attach to it.
Problem: The TUI doesn't forward a key properly when it has unsupported
modifiers like NumLock.
Solution: Don't try to add modifiers when only unsupported modifiers are
present.
Related #33791
This fixes the problem that sending a raw C0 control code to trigger a
mapping for it does not work in Terminal mode.
Note: this isn't done for 00 or 7F, as that'll be backward-incompatible.
Problem:
Default 'statusline' is implemented in C and not representable as
a statusline expression. This makes it hard for user configs/plugins to
extend it.
Solution:
- Change the default 'statusline' slightly to a statusline expression.
- Remove the C implementation.
Problem:
Nvim tries to use OSC 52 even when no TUIs are attached.
Solution:
On each UIEnter/UILeave event, check that there is a TUI client connected to Nvim's stdout.
Always allow the following four events to be nested, as they may contain
important information, and are triggered on the event loop, which may be
processed by a blocking call inside another autocommand.
- ChanInfo
- ChanOpen
- TermRequest
- TermResponse
There are some other events that are triggered on the event loop, but
they are mostly triggered by user actions in a UI client, and therefore
not very likely to happen during another autocommand, so leave them
unchanged for now.
When a plugin registers a TermRequest handler there is currently no way
for the handler to know where the terminal's cursor position was when
the sequence was received. This is often useful information, e.g. for
OSC 133 sequences which are used to annotate shell prompts.
Modify the event data for the TermRequest autocommand to be a table
instead of just a string. The "sequence" field of the table contains the
sequence string and the "cursor" field contains the cursor
position when the sequence was received.
To maintain consistency between TermRequest and TermResponse (and to
future proof the latter), TermResponse's event data is also updated to
be a table with a "sequence" field.
BREAKING CHANGE: event data for TermRequest and TermResponse is now a
table
Problem:
On Windows, spawning the `nvim --embed` server with `detach=true` breaks
various `tt.setup_child_nvim` tests.
Solution:
Make this behavior opt-in with an env var, temporarily.
Problem:
- `n.spawn()` is misleading because it also connects RPC, it's not just
"spawning" a process.
- It's confusing that `n.spawn()` and `n.spawn_argv()` are separate.
Solution:
- Replace `n.spawn()`/`n.spawn_argv()` with a single function `n.new_session()`.
This name aligns with the existing functions `n.set_session`/`n.get_session`.
- Note: removes direct handling of `prepend_argv`, but I doubt that was
important or intentional. If callers want to control use of `prepend_argv`
then we should add a new flag to `test.session.Opts`.
- Move `keep` to first parameter of `n.new_session()`.
- Add a `merge` flag to `test.session.Opts`
- Mark `_new_argv()` as private. Test should use clear/new_session/spawn_wait
instead.
We currently enable the OSC 52 clipboard provider by setting g:clipboard
when a list of conditions are met, one of which is that $SSH_TTY must be
set. We include this condition because often OSC 52 is not the best
clipboard provider, so if there are "local" providers available Nvim
should prefer those over OSC 52.
However, if no other providers are available, Nvim should use OSC 52
even when $SSH_TTY is not set. When a user is in an SSH session then the
checks for the other clipboard providers will still (typically) fail, so
OSC 52 continues to be enabled by default in SSH sessions.
This is marked as a breaking change because there are some cases where
OSC 52 wasn't enabled before and is now (or vice versa).
Problem:
`termopen` has long been a superficial wrapper around `jobstart`, and
has no real purpose. Also, `vim.system` and `nvim_open_term` presumably
will replace all features of `jobstart` and `termopen`, so centralizing
the logic will help with that.
Solution:
- Introduce `eval/deprecated.c`, where all deprecated eval funcs will live.
- Introduce "term" flag of `jobstart`.
- Deprecate `termopen`.
When a terminal application running inside the terminal emulator sets
the cursor shape or blink status of the cursor, update the cursor in the
parent terminal to match.
This removes the "virtual cursor" that has been in use by the terminal
emulator since the beginning. The original rationale for using the
virtual cursor was to avoid having to support additional UI methods to
change the cursor color for other (non-TUI) UIs, instead relying on the
TermCursor and TermCursorNC highlight groups.
The TermCursor highlight group is now used in the default 'guicursor'
value, which has a new entry for Terminal mode. However, the
TermCursorNC highlight group is no longer supported: since terminal
windows now use the real cursor, when the window is not focused there is
no cursor displayed in the window at all, so there is nothing to
highlight. Users can still use the StatusLineTermNC highlight group to
differentiate non-focused terminal windows.
BREAKING CHANGE: The TermCursorNC highlight group is no longer supported.
Before calling "attach" a screen object is just a dummy container for
(row, col) values whose purpose is to be sent as part of the "attach"
function call anyway.
Just create the screen in an attached state directly. Keep the complete
(row, col, options) config together. It is still completely valid to
later detach and re-attach as needed, including to another session.
Problem: Setting title while TUI buffer is almost full may cause the
end of a flush to be treated as a part of an OSC 2 or OSC 0
sequence, leading to problems like invisible cursor.
Solution: Make the whole sequence to set title a unibi_ext string.
Now that #16425 is fixed, use Unicode again to reduce screen height.
Unfortunately composing chars still can't be used, as it turns out that
composing chars may be missing when sent separately from the base char
at the last char a screen line.
Problem:
Using a single RPC request to child server isn't enough to prevent race
between nvim_paste and nvim_input.
Solution:
Ensure both child client and child server have processed pending events
by sending an empty DCS response to the child client and waiting for
TermResponse autocommand on the child server.
Before this PR, the behavior of nvim_paste is:
- When vim.paste() returns false, return false to the client, but treat
following chunks normally (i.e. rely on the client cancelling the
paste as expected).
- When vim.paste() throws an error, still return true to the client, but
drain the following chunks in the stream without calling vim.paste().
There are two problems with such behavior:
- When vim.paste() errors, the client is still supposed to send the
remaining chunks of the stream, even though they do nothing.
- Having different code paths for two uncommon but similar situations
complicates maintenance.
This PR makes both the cancel case and the error case return false to
the client and drain the remaining chunks of the stream, which, apart
from sharing the same code path, is beneficial whether the client checks
the return value of nvim_paste or not:
- If the client checks the return value, it can avoid sending the
following chunks needlessly after an error.
- If the client doesn't check the return value, chunks following a
cancelled chunk won't be pasted on the server regardless, which leads
to less confusing behavior.
Problem: When input immediately follows end of bracketed paste, the
nvim_input may be processed before the nvim_paste.
Solution: Ensure some waiting after the end of a bracketed paste.
- Fixes 'autoindent' being applied during redo.
- Makes redoing a large paste significantly faster.
- Stores pasted text in the register being recorded.
Fix#28561
Problem:
The default builtin UI client does not declare its client info. This
reduces discoverability and makes it difficult for plugins to identify
the UI.
Solution:
- Call nvim_set_client_info after attaching, as recommended by `:help dev-ui`.
- Also set the "pid" field.
- Also change `ui_active()` to return a count. Not directly relevant to
this commit, but will be useful later.
This module is generally used by any tests that need the full Nvim TUI
instead of `screen.lua`. Thus it should live in `functional/` instead of
in `functional/terminal/`.
