Previously the incorrect regexp forced title to be a single letter
because of using '+' instead of the '\+' regexp modifier.
closes: vim/vim#173211aa68dffbf
Co-authored-by: Alexander Abrosimov <alexander.n.abrosimov@gmail.com>
Problem: Incorrect message highlighting for highlighted message
chunks containing carriage returns.
Solution: Add a highlight for each substring ending in a newline or
carriage return separately.
Problem: Hint message to press "g<" for message that spills
'cmdheight' is too intrusive.
Solution: Remove the hint message. Document the meaning of the spill
indicator instead.
Problem: Carriage return should place the "write cursor" at the start of a line.
Solution: Construct the to be printed line by iterating over carriage returns.
Problem: Decision whether message is sent to "more" window is based on
the number of newlines present in a message, rather than the
actual text height.
With the "box" target, messages that come from a cmdline
entered command are not always routed to the more window.
Solution: Still write the message to the target buffer, and calculate
the actual text height. Postpone updating several state
variables until after the decision to re-route is made.
With the "box" target, only consider the text height of the
message if it is not a message from a cmdline entered command.
Problem: Extui shows a spill indicator to hint to the user to press "g<"
to show the output of the last command. The user may be
unaware of this mapping.
Solution: Route a hint message to the message "box" window.
Problem:
The scope `elseif $LC_MESSAGES =~ '\a\a' || $LC_MESSAGES ==# "C"` in
function `s:Locale` in file `runtime/autoload/tutor.vim` leaves a case
when l:lang is not defined.
Solution:
Define `l:lang` at function scope instead of `if` scope
Problem: still some problem with the new tutors filetype plugin
Solution: refactor code to enable/disable tutor mode into
tutor#EnableInteractive() function, include a test
(Phạm Bình An)
I find it annoying that Tutor's interactive mode is always on (or debug
mode is off) even when I open a tutor file with :edit command.
I think it makes more sense to make this "interactive mode":
- Always on when it is opened with :Tutor command
- Off otherwise
For more references, see `:help` feature, it is a much better than
:Tutor, since I don't have to run `:let g:help_debug = 1` just to be able
to edit and save a help file
Therefore, I remove `g:tutor_debug`
closes: vim/vim#1729913bea589a2
Co-authored-by: Phạm Bình An <phambinhanctb2004@gmail.com>
- Set g:tutor_debug on startup if it doesn't exist so that users can get
cmdline completion when interactively setting it.
- set b:undo_ftplugin in filetype plugin
- set default runtime file headers
closes: vim/vim#172743704b5b58a
Co-authored-by: Phạm Bình An <phambinhanctb2004@gmail.com>
feat(exrc): search exrc in parent directories
Problem:
`.nvim.lua` is only loaded from current directory, which is not flexible
when working from a subfolder of the project.
Solution:
Also search parent directories for configuration file.
=============== LIMITATIONS AND OBSERVATIONS ===============
* Remember that external-type names can only be found when
they match filenames resolvable in "&path" with "import"
declarations; load the source file of an external type to
look up its nested types and sibling top types, if any.
* Strive to narrow the search by assigning only relevant
pathnames for directories *or* an archive to "&path", e.g.
":set path-=/usr/include".
* Use "{Visual}gf" on fully-qualified names.
* Accept the fact that "&define" cannot contain end-of-line
characters (":help definition-search"). A declaration
whose matchable header is not contained within a line can
be found iff all of its non-optional components belong to
the same line; for types, such components are a keyword,
e.g. "class", followed by a run of blank characters and
an identifier, e.g. "Test"; for methods: a return type,
e.g. "String", or a keyword "void", followed by a run of
blank characters and an identifier, e.g. "toString", that
is followed by "(".
* The members of the "java.lang" package are usually not
associated with "import" declarations; to look up their
declarations, load a source file for a member of that
package, and then use, on a simple name of interest for
a member, either "[-Ctrl-d" etc. for local declarations
or "gf" for external declarations, assuming that "." *or*
the appropriate pathname for a JDK archive is assigned to
"&path".
* Follow the above instruction made for the "java.lang"
members for any type whose simple name is not associated
with an "import" declaration, i.e. a member type of the
same package that is declared in another compilation unit.
* Append the "$" character to "&iskeyword" when looking up
declarations of generated code.
See zzzyxwvut/java-vim#4.
closes: vim/vim#172817344024536
Co-authored-by: Aliaksei Budavei <0x000c70@gmail.com>
Co-authored-by: Konfekt <Konfekt@users.noreply.github.com>
Tag folding poses a few difficulties. Many elements, e.g.
"blockquote", are always delimited by start and end tags;
end tags for some elements, e.g. "p", can be omitted in
certain contexts; void elements, e.g. "hr", have no end tag.
Although the rules for supporting omissible end tags are
ad-hoc and involved, they apply to elements in scope.
Assuming syntactical wellformedness, an end tag can be
associated with its nearest matching start tag discoverable
in scope and towards the beginning of a file, whereas all
unbalanced tags and inlined tags can be disregarded.
For example:
------------------------------------------------------------
<!DOCTYPE html>
<html lang="en"> <!-- >1 : 1 -->
<body> <!-- >2 : 2 -->
<p>Paragraph vim/vim#1. <!-- = : 2 -->
<p> <!-- >3 : 3 -->
Paragraph vim/vim#2. <!-- = : 3 -->
</p> <!-- <3 : 3 -->
<p>Paragraph vim/vim#3.</p> <!-- = : 2 -->
</body> <!-- <2 : 2 -->
</html> <!-- <1 : 1 -->
------------------------------------------------------------
(HTML comments here, "<!-- ... -->", record two values for
each folded line that are separated by ":", a value obtained
from "&foldexpr" and a value obtained from "foldlevel()".)
Innermost foldedable tags will be flattened. For example:
------------------------------------------------------------
<!DOCTYPE html>
<html lang="en"> <!-- >1 : 1 -->
<body> <!-- >2 : 2 -->
<div class="block"> <!-- >3 : 3 -->
<pre><code> <!-- >4 : 4 -->
[CODE SNIPPET] <!-- = : 4 -->
</code></pre> <!-- <4 : 4 -->
</div> <!-- <3 : 3 -->
</body> <!-- <2 : 2 -->
</html> <!-- <1 : 1 -->
------------------------------------------------------------
No folding will be requested for the "<code>"-"</code>" tag
pair and reflected by "&foldexpr" because such a fold would
have claimed the same lines that the immediate fold of the
"<pre>"-"</pre>" tag already claims.
Run-on folded tags may confuse Vim. When a file such as:
------------------------------------------------------------
<!DOCTYPE html>
<html lang="en"> <!-- >1 : 1 -->
<body> <!-- >2 : 2 -->
<div class="block"> <!-- >3 : 3 -->
<pre> <!-- >4 : 4 -->
<code> <!-- >5 : 5 -->
[CODE SNIPPET vim/vim#1] <!-- = : 5 -->
</code> <!-- <5 : 5 -->
</pre> <!-- <4 : 4 -->
</div> <!-- <3 : 3 -->
<!-- = : 3 -->
<div class="block"> <!-- >3 : 3 -->
<pre> <!-- >4 : 4 -->
<code> <!-- >5 : 5 -->
[CODE SNIPPET vim/vim#2] <!-- = : 5 -->
</code> <!-- <5 : 5 -->
</pre> <!-- <4 : 4 -->
</div> <!-- <3 : 3 -->
</body> <!-- <2 : 2 -->
</html> <!-- <1 : 1 -->
------------------------------------------------------------
is reformatted as follows:
------------------------------------------------------------
<!DOCTYPE html>
<html lang="en"> <!-- >1 : 1 -->
<body> <!-- >2 : 2 -->
<div class="block"> <!-- >3 : 3 -->
<pre> <!-- >4 : 4 -->
<code> <!-- >5 : 5 -->
[CODE SNIPPET vim/vim#1] <!-- = : 5 -->
</code> <!-- <5 : 5 -->
</pre> <!-- <4 : 4 -->
</div><div class="block"><pre><code> <!-- <3 : 3 -->
[CODE SNIPPET vim/vim#2] <!-- = : 2 ? -->
</code> <!-- <5 : 2 ? -->
</pre> <!-- <4 : 2 ? -->
</div> <!-- <3 : 2 ? -->
</body> <!-- <2 : 2 -->
</html> <!-- <1 : 1 -->
------------------------------------------------------------
"&foldexpr" values will not be used as is for the lines
between (and including) "[CODE SNIPPET vim/vim#2]" and "</div>".
(Cf. v9.1.0002.)
Having syntax highlighting in effect, tag folding using the
"fold-expr" method can be enabled with:
------------------------------------------------------------
let g:html_expr_folding = 1
------------------------------------------------------------
By default, tag folding will be redone from scratch after
each occurrence of a TextChanged or an InsertLeave event.
Such frequency may not be desired, especially for large
files, and this recomputation can be disabled with:
------------------------------------------------------------
let g:html_expr_folding_without_recomputation = 1
doautocmd FileType
------------------------------------------------------------
To force another recomputation, do:
------------------------------------------------------------
unlet! b:foldsmap
normal zx
------------------------------------------------------------
References:
https://web.archive.org/web/20250328105626/https://html.spec.whatwg.org/multipage/syntax.html#optional-tagshttps://en.wikipedia.org/wiki/Dangling_elsecloses: vim/vim#17141dc7ed8f946
Co-authored-by: Aliaksei Budavei <0x000c70@gmail.com>
- Default to POSIX supported classes.
- Add a KornShell specific class list.
- Remove "or" from the Bash class list, presumably a typo.
closes: vim/vim#17293839b79eeb3
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
**Problem:** `LanguageTree:contains()` considers any range within the
start of the first tree and end of the last tree as "within" the
language tree. In the case of combined injections, this is problematic
because we only want to consider ranges within any of the combined trees
as "contained" (as opposed to any range within the entire range spanned
by all combined trees).
**Solution:** Use a more discriminative check in
`LanguageTree:contains()`.
Problem: Cannot enter "more" window while cmdwin is open since it is a
regular window and changing windows is disallowed.
Solution: Close cmdwin to enter the "more" window. Minor regression
w.r.t. the current message grid. Resolving that will require
somehow bypassing textlock for the "more" window.
Problem: Unable to discern windows used by the extui interface
to configure their local options.
'winblend' may be detrimental to legibility depending on the
colorscheme and 'background'.
Solution: Assign the "cmdline", "msgmore", "msgprompt" and "msgbox"
'filetype' to the respective windows.
Don't set 'winblend' for the message "box" window.
Problem: Extui does not route messages emitted as a result of a typed
command to the "more" window.
Command message leading shell messages is missing a kind.
Messages not routed to 'cmdheight' area after it was 0.
Solution: Route messages that were emitted in the same event loop as an
entered command to the "more" window. Also append multiple
messages in an already open more-window.
Assign it the `shell_cmd` kind.
Change message position when 'cmdheight' changes from 0.
Problem: Currently, 'smartcase' is respected when completing keywords
using <C-N>, <C-P>, <C-X><C-N>, and <C-X><C-P>. However, when
a user continues typing and the completion menu is filtered
using cached matches, 'smartcase' is not applied. This leads
to poor-quality or irrelevant completion suggestions, as shown
in the example below.
Solution: When filtering cached completion items after typing additional
characters, apply case-sensitive comparison if 'smartcase' is
enabled and the typed pattern includes uppercase characters.
This ensures consistent and expected completion behavior.
(Girish Palya)
closes: vim/vim#17271dc314053e1
Co-authored-by: Girish Palya <girishji@gmail.com>
Problem: nil error possible if a loaded buffer hasn't been drawn in a window:
```vim
lua vim.lsp.document_color.is_enabled() -- Load module
badd foo
call bufload('foo')
colo default
```
Solution: Skip _buf_refresh branch also if bufstates[bufnr] is nil.
Problem: The "box" window width is calculated on the last line when
applying "last" virt_text. There may be longer lines
part of the same message.
Solution: Don't decrease box width if the calculated width is smaller.
Minor unrelated changes.
Co-authored-by: Eike <eike.rackwitz@mail.de>
Ignore single-quoted backslash escape sequences in parameter expansions.
\' is not an escaped single quote in ${foo:-'word\'}.
closes: vim/vim#17261fe22867ef5
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Problem: conceal_lines cache is invalidated in `on_buf`
which is too late for code calculating text height after a
buffer change but before a redraw (like `lsp/util.lua`).
Solution: Replace `on_buf` with `on_bytes` handler that invalidates
the cache and clears the marks.
This commit will eliminate flicker while editing one open window. It
works by querying previously calculated trees for highlight marks, in
the case that we are still asynchronously parsing in `on_win`.
It will not fully solve the case of flicker when there are multiple open
windows, since the parser will drop previously parsed injection trees
whenever it receives a call to parse a different region of the buffer.
This will require a refactor of `languagetree.lua`.
Problem: Moving the "more" (or any extui)-window to a split with
`wincmd L` does not invalidate it as a tracked window.
Solution: Drop an extui window that is no longer floating.
Problem:
Stopping a language server and then calling vim.lsp.start() with the same name/root will return the old language server that's in the middle of shutting down. vim.lsp.start() won't return a new server until the old process has terminated.
Solution:
Introducing a client._is_stopping field that tracks the shutdown phase, preventing the client from being reused.
