Problem: 'breakindent' behaves inconsistently with 'list' and splits.
Solution: Use 'listchars' from the correct window and handle caching
properly. Move cheaper comparisons to the top.
(zeertzjq)
closes: vim/vim#14008efabd7c8d4
The `get_indent_str_vtab()` function currently calls `tabstop_padding()`
every time a tab is encountered (unless tabstops aren't used).
`tabstop_padding()` either does a division by 'tabstop' If 'vartabstop'
is not set, or iterates through the 'vartabstop' list to find current
tab width.
Since the virtual column only increases, we can keep track of where the
next tabstop would be, and update this information once it was reached.
`get_indent_str_vtab()` also depends on 'listchars' "tab" value from the
current window, even though it may be called for a line from the same
buffer in a different window. In most cases, it is called with tabstops
enabled (last argument was `false`), so I split the function into one
that uses tabstops and the other that doesn't.
I removed `get_indent_str()` since I couldn't find any calls to it.
When "q" is set in 'shortmess' it now fully hides the "recording @a" message
when you are recording a macro instead of just shortening to "recording". This
removes duplication when using reg_recording() in the statusline.
Related #19193
Problem: Still a qsort() comparison function fuzzy_match_item_compare()
that returns result of subtraction (after 9.1.0089).
Solution: Use an explicit comparison instead of subtraction.
(zeertzjq)
closes: vim/vim#1400477078276bf
Problem: qsort() comparison functions should be transitive
Solution: Do not subtract values, but rather use explicit comparisons
Improve qsort() comparison functions
There has been a recent report on qsort() causing out-of-bounds read &
write in glibc for non transitive comparison functions
https://www.qualys.com/2024/01/30/qsort.txt
Even so the bug is in glibc's implementation of the qsort() algorithm,
it's bad style to just use substraction for the comparison functions,
which may cause overflow issues and as hinted at in OpenBSD's manual
page for qsort(): "It is almost always an error to use subtraction to
compute the return value of the comparison function."
So check the qsort() comparison functions and change them to be safe.
closes: vim/vim#13980e06e437665
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Restore lastused_tabpage too early in do_arg_all() function it
will change later in the function.
Solution: Restore lastused_tabpage a bit later, when being done with
tabpages (glepnir)
closes: vim/vim#139922975a54f28
Problem:
Since 2448816956, the --startuptime report shows
two blocks of data. The TUI process and its embedded nvim process write to the
file concurrently, which may interleave the two startup sequences into the same
timeline.
Solution:
Report each process as a separate section in the same file.
1. Each process buffers the full report.
2. After startup is finished, the buffer is flushed (appended) to the file.
Fix#23036
Sample report:
--- Startup times for process: Primary/TUI ---
times in msec
clock self+sourced self: sourced script
clock elapsed: other lines
000.006 000.006: --- NVIM STARTING ---
000.428 000.422: event init
000.728 000.301: early init
...
005.880 000.713: init highlight
005.882 000.002: --- NVIM STARTED ---
--- Startup times for process: Embedded ---
times in msec
clock self+sourced self: sourced script
clock elapsed: other lines
000.006 000.006: --- NVIM STARTING ---
000.409 000.403: event init
000.557 000.148: early init
000.633 000.077: locale set
...
014.383 000.430: first screen update
014.387 000.003: --- NVIM STARTED ---
Problem: TextChanged not triggered for :norm! commands
(machakann, after v9.0.2031)
Solution: Only reset curbuf->b_last_changedtick if TextChangedI
was triggered in insert mode (and not blocked)
Note: for unknown reasons, the test fails on Windows (but seems to work
fine when running interactively)
fixes: vim/vim#13967closes: vim/vim#13984c9e79e5284
Cherry-pick test_autocmd.vim change from patch 8.2.4149.
Co-authored-by: Christian Brabandt <cb@256bit.org>
Currently having two separate memory strategies for API return values is
a bit unnecessary, and mostly a consequence of converting the hot spot
cases which needed it first. But there is really no downside to using
arena everywhere (which implies also directly using strings which are
allocated earlier or even statically, without copy).
There only restriction is we need to know the size of arrays in advance,
but this info can often be passed on from some earlier stage if it is
missing.
This collects some "small" cases. The more complex stuff will get a PR
each.
- `TSQuery`: userdata object for parsed query.
- `vim.treesitter.Query`: renamed from `Query`.
- Add a new field `lang`.
- `TSQueryInfo`:
- Move to `vim/treesitter/_meta.lua`, because C code owns it.
- Correct typing for `patterns`, should be a map from `integer`
(pattern_id) to `(integer|string)[][]` (list of predicates or
directives).
- `vim.treesitter.QueryInfo` is added.
- This currently has the same structure as `TSQueryInfo` (exported
from C code).
- Document the fields (see `TSQuery:inspect`).
- Add typing for `vim._ts_parse_query()`.
Problem: Redrawing can be improved when inserting/deleting lines with 'number'.
Solution: Only redraw the number column of lines below changed lines.
Add a test as this wasn't previously tested.
(zeertzjq)
closes: vim/vim#13985ae07ebc04b
Problem: Redrawing can be improved when deleting lines with 'cursorline'.
Solution: Use smarter invalidation and adjustment. Remove unnecessary
UPD_VALID as it is already set at the top of the loop. Make
the test for vim/vim#4862 fail without the fix.
(zeertzjq)
closes: vim/vim#139867ce34c9a94
Getting current channel info was kind of annoying via RPC. Two
functions had to be called:
1. `nvim_get_api_info` which returns `[channel_id, meta_data]`.
- This results in `channel_id = api.nvim_get_api_info()[0]`.
- Here the meta_data is sent but never used.
2. Finally call `nvim_get_chan_info(channel_id)`.
This commit reduces the need for `nvim_get_api_info` as passing 0
returns current channel info.
Implement api_keydict_to_dict as the complement to api_dict_to_keydict
Fix a conversion error when nvim_get_win_config gets called from lua,
where Float values "x" and "y" didn't get converted to lua numbers.
`utf_char2cells()` calls `utf_printable()` twice (sometimes indirectly,
through `vim_isprintc()`) for characters >= 128. The function can be
refactored to call to it only once.
`utf_printable()` uses binary search on ranges of unprintable characters
to determine if a given character is printable. Since there are only 9
ranges, and the first range contains only one character, binary search
can be replaced with SSE2 SIMD comparisons that check 8 ranges at a
time, and the first range is checked separately. SSE2 is enabled by
default in GCC, Clang and MSVC for x86-64.
Add 3-byte utf-8 to screenpos_spec benchmarks.
Problem:
When nvim_input is followed immediately by non-fast events on RPC, both
events and input are available after the polling done by the os_inchar()
in state_enter(), but state_enter() then chooses to process events even
if input is available, which is inconsistent with state_handle_k_event()
that stops processing events once input is available.
Solution:
Also check for available input after the os_inchar() in state_enter().
Problem: LineNrAbove and LineNrBelow background wrong on wrapped lines.
Solution: Update number column also for wrapped part of a line.
(zeertzjq)
closes: vim/vim#13974ebfd856cfd
Cherry-pick test_number.vim changes from patch 9.0.0626.
Problem: The call to redraw_for_cursorline() in nv_mousescroll() is
unnecessary because redraw_for_cursorline() only sets redraw
type to UPD_VALID, and all code paths in do_mousescroll()
already set redraw type to at least UPD_VALID.
Solution: Remove call to redraw_for_cursorline() in nv_mousescroll().
(zeertzjq)
closes: vim/vim#139793f1b5312e0
Determine the needed buffer space first, instead of trying to revert the
effect of prepare_call if message does not fit. The previous code did
not revert the full state, which caused corrupted messages to be sent.
So, rather than trying to fix all of that, with fragile and hard to read
code as a result, the code is now much more simple, although slightly
slower.
Problem: `tui->space_buf` may be smaller than the width of the TUI or widest
grid, causing an overflow when calling `tui_grid_clear` if `print_spaces` is
called from `clear_region` (clears the TUI's screen since #23428).
Solution: resize `space_buf` to be wide enough to fit the TUI or widest grid.
Didn't bother shrinking the allocation if the max widths decrease.
Problem: insert completion not correct when adding new leader
Solution: Reset compl_curr_match to compl_shown_match
(glepnir)
closes: vim/vim#13957cbb46b4398
Problem: did_set_breakat() should be in optionstr.c as 'breakat' is a
string option.
Solution: Move did_set_breakat() to optionstr.c.
(zeertzjq)
closes: vim/vim#13958eac3fdcfa0
Problem: Looping over modifier_keys_table[] unnecessarily with only
MOD_MASK_ALT or MOD_MASK_CMD, as modifier_keys_table[] only
contains MOD_MASK_SHIFT and MOD_MASK_CTRL, and the loop won't
do anything.
Solution: Remove MOD_MASK_ALT and MOD_MASK_CMD from the condition.
(zeertzjq)
closes: vim/vim#139630c989e4a3a
Problem: Code is indented more than necessary.
Solution: Use an early return where it makes sense. (Yegappan Lakshmanan,
closesvim/vim#11813)
e857598896
Skip list_alloc_with_items().
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Code is indented too much.
Solution: Use an early return. (Yegappan Lakshmanan, closesvim/vim#11756)
87c1cbbe98
Omit free_eval_tofree_later(): Vim9 script only.
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
