Extend the capabilities of is_os to detect more platforms such as
freebsd and openbsd. Also remove `iswin()` helper function as it can be
replaced by `is_os("win")`.
This is essentially a convenience wrapper around the `pending()`
function, similar to `skip_fragile()` but more general-purpose.
Also remove `pending_win32` function as it can be replaced by
`skip(iswin())`.
- If Nvim was just started, don't create a new tab.
- Name the buffer "health://".
- Use "help" syntax instead of "markdown". It fits better, and
eliminates various workarounds.
- Simplfy formatting, avoid visual noise.
- Don't print a "INFO" status, it is noisy.
- Drop the ":" after statuses, they are already UPPERCASE and highlighted.
* fix(man): handle absolute paths as :Man targets
Previously, attempting to provide `:Man` with an absolute path as the name would
cause neovim to return the following error:
```
Error detected while processing command line:
/usr/local/share/nvim/runtime/lua/man.lua:690: /usr/local/share/nvim/runtime/lua/man.lua:683: Vim:E426: tag not found: nil(nil)
Press ENTER or type command to continue
```
..because it would try to validate the existence of a man page for the provided
name by executing `man -w /some/path` which (on at least some Linux machines
[0]) returns `/some/path` instead of the path to the nroff files that would be
formatted to satisfy the man(1) lookup.
While man pages are not normally named after absolute paths, users shouldn't be
blamed for trying. Given such a name/path, neovim would **not** complain that
the path didn't have a corresponding man file but would error out when trying
to call the tag function for the null-propagated name-and-section `nil(nil)`.
(The same underlying error existed before this function was ported to lua, but
did not exhibit the lua-specific `nil(nil)` name; instead a tag lookup for `()`
would fail and error out.)
With this patch, we detect the case where `man -w ...` returns the same value as
the provided name to not only prevent invoking the tag function for a
non-existent/malformed name+sect but also to properly report the non-existence
of a man page for the provided lookup (the absolute path).
While man(1) can be used to directly read an nroff-formatted document via `man
/path/to/nroff.doc`, `:Man /path/to/nroff.doc` never supported this behavior so
no functionality is lost in case the provided path _was_ an nroff file.
[0]: `man -w /absolute/path` returning `/absolute/path` observed on an Ubuntu
18.04 installation.
* test: add regression test for #20624
Add a functional test to `man_spec.lua` to check for a regression for #20624 by
first obtaining an absolute path to a random file and materializing it to disk,
then attempting to query `:Man` for an entry by that same name/path.
The test passes if nvim correctly reports that there is no man page
correspending to the provided name/path and fails if any other error (or no
error) is shown.
These tests contained errors due to synstack() and friends do not ensure
syntax state is fully synced. Actually expecting what the user will
see with a screen test does ensure it is fully synced.
`!did_throw` doesn't exactly imply `!current_exception`, as `did_throw = false`
is sometimes used to defer exception handling for later (without forgetting the
exception). E.g: uncaught exception handling in `do_cmdline()` may be deferred
to a different call (e.g: when `try_level > 0`).
In #7881, `current_exception = NULL` in `do_cmdline()` is used as an analogue of
`did_throw = false`, but also causes the pending exception to be lost, which
also leaks as `discard_exception()` wasn't used.
It may be possible to fix this by saving/restoring `current_exception`, but
handling all of `did_throw`'s edge cases seems messier. Maybe not worth
diverging over.
This fix also uncovers a `man_spec.lua` bug on Windows: exceptions are thrown
due to Windows missing `man`, but they're lost; skip these tests if `man` isn't
executable.
`:saveas newName` changes the name of an existing buffer.
Due to the buffer re-use it skips the lsp attach phase and immediately
sends a `didSave` notification to the server.
Servers get confused about this, because they expect a `didOpen`
notification first.
Closes https://github.com/neovim/neovim/issues/18688
This fixes the following bugs:
`${1:else_text}` -> format with if_text: "else_text"
`${1:-else_text}` -> format with if_text: "else_text"
`${1:}` in `format` (eg. empty else_text) -> error.
`${1:}` (eg. empty placeholder) -> error.
Thanks hrsh7th :)
Most LSP servers require the notification to correctly load the
settings and for those who don't it doesn't cause any harm.
So far this is done in lspconfig, but with the addition of vim.lsp.start
it should be part of core.
Problem:
https://github.com/neovim/neovim/pull/18720#issuecomment-1142614996
The vim.health module is detected as a healthcheck, which produces spurious errors:
vim: require("vim.health").check()
========================================================================
- ERROR: Failed to run healthcheck for "vim" plugin. Exception:
function health#check, line 20
Vim(eval):E5108: Error executing lua [string "luaeval()"]:1: attempt to call field 'check' (a nil value)
stack traceback:
[string "luaeval()"]:1: in main chunk
Solution:
Skip vim.health when discovering healthchecks.
Cuts down typical run time for `plugin/lsp_spec.lua`
from 70 secs to 12 secs in ASAN CI build.
This happens in ASAN/EXIT_FREE builds where nvim waits 2000ms due to
unclosed handled. I wasn't able to pin-point the exact cause.
But these tests ran in nested context where two server/client pairs
were setup for no good reason. Moving these tests out so only one client
is being setup fixed the exit hang.
The current approach of using `on_attach` callbacks for configuring
buffers for LSP is suboptimal:
1. It does not use the standard Nvim interface for driving and hooking
into events (i.e. autocommands)
2. There is no way for "third parties" (e.g. plugins) to hook into the
event. This means that *all* buffer configuration must go into the
user-supplied on_attach callback. This also makes it impossible for
these configurations to be modular, since it all must happen in the
same place.
3. There is currently no way to do something when a client detaches from
a buffer (there is no `on_detach` callback).
The solution is to use the traditional method of event handling in Nvim:
autocommands. When a LSP client is attached to a buffer, fire a
`LspAttach`. Likewise, when a client detaches from a buffer fire a
`LspDetach` event.
This enables plugins to easily add LSP-specific configuration to buffers
as well as enabling users to make their own configurations more modular
(e.g. by creating multiple LspAttach autocommands that each do
something unique).
Problem:
q in "$MANPAGER mode" does not quit Nvim. This is because
ftplugin/man.vim creates its own mapping:
nnoremap <silent> <buffer> <nowait> q :lclose<CR><C-W>c
which overrides the one set by the autoload file when using :Man!
("$MANPAGER mode")
Solution:
Set b:pager during "$MANPAGER mode" so that ftplugin/man.vim can set the
mapping correctly.
Fixes#18281
Ref #17791
Helped-by: Gregory Anders <8965202+gpanders@users.noreply.github.com>
Implement filtering of actions based on the kind when passing the 'only'
parameter to code_action(). Action kinds are hierachical with a '.' as
the separator, and the filter thus allows, for example, both 'quickfix'
and 'quickfix.foo' when requestiong only 'quickfix'.
Fix https://github.com/neovim/neovim/pull/18221#issuecomment-1110179121
Adds filter and id options to filter the client to use for rename.
Similar to the recently added `format` function.
rename will use all matching clients one after another and can handle a
mix of prepareRename/rename support. Also ensures the right
`offset_encoding` is used for the `make_position_params` calls
This fixes issues where subsequent calls to vim.lsp.codelens.refresh()
would have no effect due to the buffer not getting cleared from the
active_refresh table.
Examples of how such scenarios would occur are:
- A textDocument/codeLens result yielded an error.
- The 'textDocument/codeLens' handler was overriden in such a way that
it no longer called vim.lsp.codelens.on_codelens().
Deprecates the existing `vim.lsp.buf.formatting` function.
With this, `vim.lsp.buf.format` will replace all three:
- vim.lsp.buf.formatting
- vim.lsp.buf.formatting_sync
- vim.lsp.buf.formatting_seq_sync
* feat(lsp)!: remove capabilities sanitization
Users must now access client.server_capabilities which matches the same
structure as the protocol.
https://microsoft.github.io/language-server-protocol/specification
client.resolved_capabilities is no longer used to gate capabilities, and
will be removed in a future release.
BREAKING CHANGE
Co-authored-by: Mathias Fussenegger <f.mathias@zignar.net>
Implement two new options to vim.lsp.buf.code_action():
- filter (function): predicate taking an Action as input, and returning
a boolean.
- apply (boolean): when set to true, and there is just one remaining
action (after filtering), the action is applied without user query.
These options can, for example, be used to filter out, and automatically
apply, the action indicated by the server to be preferred:
vim.lsp.buf.code_action({
filter = function(action)
return action.isPreferred
end,
apply = true,
})
Fix#17514.
Some language servers send empty `textDocument/publishDiagnostics`
messages after indexing the project with URIs corresponding to unopened buffers.
This commit guards against opening buffers corresponding to empty diagnostics.
The use of 'softtabstop' to set tabSize was introduced in 5d5b068,
replacing 'tabstop'. If we look past the name tabSize and at the actual
purpose of the field, it's the indentation width used when formatting.
This corresponds to the Vim option 'shiftwidth', not 'softtabstop'.
The latter has the comparatively mundane purpose of controlling what
happens when you hit the tab key (and even this is incomplete, as it
fails to account for 'smarttab').
This removes the "fallback" to utf-16 in many of our helper functions. We
should always explicitly pass these around when possible except in two
locations:
* generating params with help utilities called by buf.lua functions
* the buf.lua functions themselves
Anything that is called by the handler should be passed the offset encoding.
omnisharp-roslyn can send negative values:
{
activeParameter = 0,
activeSignature = -1,
signatures = { {
documentation = "",
label = "TestEntity.TestEntity()",
parameters = {}
} }
}
In 3.16 of the specification `activeSignature` is defined as `uinteger`
and therefore negative values shouldn't be allowed, but within 3.15 it
was defined as `number` which makes me think we can be a bit lenient in
this case and handle them.
The expected behavior is quite clear:
The active signature. If omitted or the value lies outside the
range of `signatures` the value defaults to zero or is ignored if
the `SignatureHelp` has no signatures.
Fixes an error:
util.lua:1685: attempt to get length of local 'lines' (a nil value)
util.lua:1685: in function 'trim_empty_lines'
handlers.lua:334: in function 'textDocument/signatureHelp'
