Problem: `PackChanged[Pre]` events with `kind=update` are triggered both
during plugin's initial installation and after already installed
plugin was updated.
It was a deliberate decision to allow writing only a single update
hook to act as a dedicated "build" entry point (like execute `make` or
`cargo build —release`). This mimics how other plugin managers have a
single "build" command.
This was a result of 'mini.deps' experience with the different
approach: "update" hooks are not run during install. This proved to be
confusing as it requires to write two hooks. But also the reason might
be that 'mini.deps' names it "checkout" hook instead of "update".
However, the `vim.pack` event approach makes it lower cost to handle
separate "update" and "install" events. Something like
`if ev.data.kind == 'install' or ev.data.kind == 'update' then`
instead of two autocommands.
Plus this makes clearer separation of events.
Solution: do not trigger `PackChanged[Pre] kind=update` event during
install.
Problem: Inside `PackChanged[Pre]` callbacks it might be useful to tell
if the affected plugin is active or not. It is already possible via
extra `vim.pack.get({ 'plug-name' })[1].active`, but it is not quite
user-friendly for something that might be needed frequently in real
world use cases.
Solution: Supply extra `active` event data field.
This warning doesn't really make sense, since the `enable()` call is
meant to be run before the `lsp.config` calls. It will be logged many
times (once for each enabled LSP) at startup.
This is especially annoying because calling `enable()` after
configuration causes the first opened buffer not to have its filetype
set in some situations. This is a separate bug which really needs to be
fixed, and makes this superfluous logging more likely.
The current implementation has a race condition where items are appended
to the completion list twice when a second completion runs while the
first is still going. This hotfix just deduplicates the entire list.
Co-authored-by: Tomasz N <przepompownia@users.noreply.github.com>
Problem:
If a client doesn't have a config then an error may be thrown.
Probably caused by: 2f78ff816b
Lua callback: …/lsp.lua:442: attempt to index local 'config' (a nil value)
stack traceback:
…/lsp.lua:442: in function 'can_start'
…/lsp.lua:479: in function 'lsp_enable_callback'
…/lsp.lua:566: in function <…/lsp.lua:565>
Solution:
Not all clients necessarily have configs.
- Handle `config=nil` in `can_start`.
- If user "enables" an invalid name that happens to match a *client*
name, don't auto-detach the client.
- Column align tags
- Move tags to the same line as the function signature
- Move descriptions to the line below the function signature
- Add missing hyperlinks to builtins in the description text
closes: vim/vim#1847883eb1da19e
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Use double sentence spacing and wrap lines at 'textwidth'. Code
examples and tables were not wrapped unless this had already been done
locally.
closes: vim/vim#18453c58f91c035
Fix incorrect docs in :h ModeChanged.
Cherry-pick :h bufnr() changes from patch 8.1.2080.
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Fixes issue on mac where it was constantly reloading buffers as paths
were not being normalized and resolved correctly (in relation to buffer
name).
Quickfix entry:
/var/folders/pt/2s7dzyw12v36tsslrghfgpkr0000gn/T/git-difftool.m95lj8/right/app.vue
Buffer name:
/private/var/folders/pt/2s7dzyw12v36tsslrghfgpkr0000gn/T/git-difftool.m95lj8/right/app.vue
/var was synlinked to /private/var and this was not being properly
handled.
Also added lazy redraw to avoid too many redraws when this happens in
future and added test for symlink handling.
Signed-off-by: Tomas Slusny <slusnucky@gmail.com>
Problem:
1. Setting `pumborder=+,+,+,+,+,+,+,+` failed to render the custom
border characters correctly. The issue occurred in `parse_winborder()`
where it incorrectly used `p_winborder` instead of the `border_opt`
parameter when the option value didn't contain commas.
2. In `pum_redraw()`, calling `parse_border_style()` directly with the
option string failed to parse comma-separated border characters.
3. Missing documentation for PmenuShadow and PmenuShadowThrough
highlight groups used by the shadow border style.
4. Coverity reports CID 631420: passing WinConfig (480 bytes) by value
in `grid_draw_border()`.
5. crash when using `shadow` value on pumborder.
Solution:
1. Fix `parse_winborder()` to use `border_opt` parameter consistently,
ensuring the correct option value is parsed regardless of which
option (winborder/pumborder) is being set.
2. Update `pum_redraw()` to call `parse_winborder()` instead of
`parse_border_style()`, properly handling both predefined styles
and custom comma-separated border characters.
3. Add documentation for PmenuShadow (blended shadow areas) and
PmenuShadowThrough (see-through corners) highlight groups.
4. Change `grid_draw_border()` to accept WinConfig by pointer.
5. When the "shadow" style is used, no additional row and column offset
is applied, and the border width is reduced.
Problem:
Built-in diff mode (nvim -d) does not support directory diffing
as required by git difftool -d. This makes it difficult to compare
entire directories, detect renames, and navigate changes efficiently.
Solution:
Add a DiffTool plugin and command that enables side-by-side diffing of
files and directories in Neovim. The plugin supports rename detection,
highlights changes in the quickfix list, and provides a user command for
easy invocation. This allows proper integration with git difftool -d for
directory comparison.
Example git config:
```ini
[diff]
tool = nvim_difftool
[difftool "nvim_difftool"]
cmd = nvim -c "packadd nvim.difftool" -c "DiffTool $LOCAL $REMOTE"
```
Signed-off-by: Tomas Slusny <slusnucky@gmail.com>
Co-authored-by: Phạm Bình An <111893501+brianhuster@users.noreply.github.com>
Co-authored-by: Justin M. Keyes <justinkz@gmail.com>
* fix(lsp): type of root_dir should be annotated with string|fun|nil
* feat(lsp): support root_dir as function in _get_workspace_folders
* feat(lsp): let checkhealth support root_dir() function
Examples:
vim.lsp: Active Clients ~
- lua_ls (id: 1)
- Version: <Unknown>
- Root directories:
~/foo/bar
~/dev/neovim
Co-authored-by: Justin M. Keyes <justinkz@gmail.com>
Problem:
Popup menu cannot have a border.
Solution:
Support 'pumborder' option.
Generalize `win_redr_border` to `grid_redr_border`,
which redraws border for window grid and pum grid.
Problem: If plugin was intended to install but there were errors (like
if there is a typo in `src`), lockfile still includes its entry.
This leads to all source of problems (like not correct `get()` output,
not working `update()`, etc.).
Solution: Explicitly account for plugins that were not installed.
Alternative solution might be to write a safe
`lock_set(plug, field, value)` wrapper (which sets field for a correct
`plugins` entry in the lockfile Lua table) and use it after install
to detect the change in `version`. However, this always requires
an extra pass through plugins on every startup, which is suboptimal.
Optimizing for the "happy path" should be a priority in `add()`.
Problem: filetype: KerML and SysML files are not recognized
Solution: Detect *.kerml as kerml filetype, detect *.sysml as sysml
filetype, include a kerml and sysml filetype plugin
(Daumantas Kavolis)
closes: vim/vim#18476b73ccf7ff0
Co-authored-by: Daumantas Kavolis <daumantas.kavolis@sensmetry.com>
Problem: No way to granularly operate on plugins when inside
confirmation buffer.
Solution: Implement code actions for in-process LSP that act on "plugin
at cursor":
- Update (if has updates).
- Skip updating (if has updates).
- Delete.
Activate via default `gra` or `vim.lsp.buf.code_action()`.
Problem: Installing plugin always pulls latest `version` changes
(usually from the default branch or "latest version tag"). It is more
robust to prefer initial installation to use the latest recorded
(i.e. "working") revision.
Solution: Prefer using revision from the lockfile (if present) during
install. The extra `update()` will pull the latest changes.
Problem: Running `update()` by default doesn't include not active
plugins, because there was no way to get relevant `version` to get
updates from. This might be a problem in presence of lazy loaded
plugins, i.e. ones that can be "not *yet* active" but still needed to
be updated.
Solution: Include not active plugins by default since their `version` is
tracked via lockfile.
Problem: The revision data is returned behind `opts.info` flag because
it required extra Git calls. With lockfile it is not the case.
Solution: Use lockfile to always set `rev` field in output of `get()`.
Problem: `get()` doesn't return `spec.version` about not-yet-active
plugins (because there was no way to know that without `add()`).
Solution: Use lockfile data to set `spec.version` of non-active plugins.
Problem: Some use cases require or benefit from persistent on disk
storage of plugin data (a.k.a. "lockfile"):
1. Allow `update()` to act on not-yet-active plugins. Currently if
`add()` is not yet called, then plugin's version is unknown
and `update()` can't decide where to look for changes.
2. Efficiently know plugin's dependencies without having to read
'pkg.json' files on every load for every plugin. This is for the
future, after there is `packspec` support (or other declaration of
dependencies on plugin's side).
3. Allow initial install to check out the exact latest "working" state
for a reproducible setup. Currently it pulls the latest available
`version.`
4. Ensure that all declared plugins are installed, even if lazy loaded.
So that later `add()` does not trigger auto-install (when there
might be no Internet connection, for example) and there is no issues
with knowing which plugins are used in the config (so even never
loaded rare plugins are still installed and can be updated).
5. Allow `add()` to detect if plugin's spec has changed between
Nvim sessions and act accordingly. I.e. either set new `src` as
origin or enforce `version.` This is not critical and can be done
during `update()`, but it might be nice to have.
Solution: Add lockfile in JSON format that tracks (adds, updtes,
removes) necessary data for described use cases. Here are the required
data that enables each point:
1. `name` -> `version` map.
2. `name` -> `dependencies` map.
3. `name` -> `rev` map. Probably also requires `name` -> `src` map
to ensure that commit comes from correct origin.
4. `name` -> `src` map. It would be good to also track the order,
but that might be too many complications and redundant together
with point 2.
5. Map from `name` to all relevant spec fields. I.e. `name` -> `src`
and `name` -> `version` for now. Storing data might be too much,
but can be discussed, of course.
This commit only adds lockfile tracking without implementing actual
use cases. It is stored in user's config directory and is suggested to
be tracked via version control.
Example of a lockfile:
```json
{
# Extra nesting to more future proof.
"plugins": {
"plug-a": {
"ref": "abcdef1"
"src": "https://github.com/user/plug-a",
# No `version` means it was `nil` (infer default branch later)
},
"plug-b": {
"dependencies": ["plugin-a", "plug-c"],
"src": "https://github.com/user/plug-b",
"ref": "bcdefg2",
# Enclose string `version` in quotes
"version": "'dev'"
},
"plug-c": {
"src": "https://github.com/user/plug-c",
"ref": "cdefgh3",
# Store `vim.version.Range` via its `tostring()` output
"version": ">=0.0.0",
}
}
}
```
Problem: Cannot configure the inner foldlevel indicator for the
foldcolumn
Solution: Add "foldinner" suboption value to the 'fillchar' option
(Maria José Solano).
closes: vim/vim#183651a691afd27
Co-authored-by: Maria José Solano <majosolano99@gmail.com>
Problem: filetype: Not all PKL files are recognized
Solution: Detect *.pcf as pkl filetype, detect using the pkl-lsp://
protocol as pkl filetype, include PKL syntax script
(Jan Claußen)
This adds basic syntax support for the new PKL language by Apple.
What works:
- Shebang support
- Comment support
- Integers (decimal, hex, octal and binary) support
- Floating point support including exponentials
- Basic datatype support
- Unicode escape delimiters
- Escape code support
- String interpolation
- Support up to five pounds for custom delimiters
- Folding of multi-line comments and blocks
What doesn't work:
The language heavily uses parameterized type declarations, which can get
very complex. It is very hard to highlight this properly. There is
official Tree-sitter support for this. Since it is hard to pull this off
in a vim syntax file, I opted for basic support of the data types.
References:
https://github.com/apple/pkl-pantryfixes: vim/vim#18271closes: vim/vim#1827467a8f2945e
Co-authored-by: Jan Claußen <jan.claussen10@web.de>
This commit changes `languagetree.lua` so that it creates a scratch
buffer under the hood when dealing with string parsers. This will make
it much easier to just use extmarks whenever we need to track injection
trees in `languagetree.lua`. This also allows us to remove the
`treesitter.c` code for parsing a string directly.
Note that the string parser's scratch buffer has `set noeol nofixeol` so
that the parsed source exactly matches the passed in string.
Fixes#35884
Problem: Since `once_buf_loaded` might call a callback passed to it at a
later point (which is it's reason to exist) that callback might end up
referring to stale diagnostics in a handler's `show` function. For
example, if we first call `vim.diagnostic.set` for an unloaded buffer,
then call `vim.diagnostic.reset` and only then load the buffer, we might
still see diagnostics from `vim.diagnostic.set` call, which are stale at
this point.
Solution: only keep one autocommand from the most reset `show` call and
delete it when `hide` is called.
The current description (especially the "unlimited width" part) is
inaccurate in several ways:
- The size of virtual text can depend on window width. In particular,
the size of "above" virtual text can be equal to window width.
- A double-width character that doesn't fit adds 1 to the virtual column
of the following characters.
- The size of 'showbreak' and 'breakindent' is counted.
related: vim/vim#5713closes: vim/vim#18447014c731fa5
Problem:
Autocmds in inline_completion Completor are not scoped to specific
buffers. When multiple buffers have inline completion enabled, events
(InsertEnter, CursorMovedI, TextChangedP, InsertLeave) in any buffer
trigger callbacks for all Completor instances, causing incorrect
behavior across buffers.
Solution:
Add `buffer = bufnr` parameter to nvim_create_autocmd() calls to make
them buffer-local. Each Completor instance now only responds to events
in its own buffer.
Change the second "if" to "because", otherwise it may be misinterpreted
that preinserted() can return non-zero just because these options are
set.
closes: vim/vim#184094edaf89233
