Problem: Cannot configure the inner foldlevel indicator for the
foldcolumn
Solution: Add "foldinner" suboption value to the 'fillchar' option
(Maria José Solano).
closes: vim/vim#183651a691afd27
Co-authored-by: Maria José Solano <majosolano99@gmail.com>
Problem: 'nowrap' in a modeline may hide malicious code.
Solution: Forcibly use '>' as 'listchars' "extends" if 'nowrap' was set
from a modeline (zeertzjq).
Manual `:setlocal nowrap` disables this behavior. There is a separate
problem with `:set nowrap` that also applies to some other options.
related: vim/vim#18214
related: vim/vim#18399closes: vim/vim#184259d5208a931
Cherry-pick some test_modeline.vim changes from patches 9.0.{0363,0626}.
Problem: Wrong display with 'smoothscroll' and long wrapped virtual
text at EOL.
Solution: Handle w_skipcol inside long wrapped virtual text at EOL
(zeertzjq).
closes: vim/vim#18408d9318acc02
These are not needed after #35129 but making uncrustify still play nice
with them was a bit tricky.
Unfortunately `uncrustify --update-config-with-doc` breaks strings
with backslashes. This issue has been reported upstream,
and in the meanwhile auto-update on every single run has been disabled.
Problem: not possible to anchor specific lines in diff mode
Solution: Add support for the anchoring lines in diff mode using the
'diffanchor' option (Yee Cheng Chin).
Adds support for anchoring specific lines to each other while viewing a
diff. While lines are anchored, they are guaranteed to be aligned to
each other in a diff view, allowing the user to control and inform the
diff algorithm what the desired alignment is. Internally, this is done
by splitting up the buffer at each anchor and run the diff algorithm on
each split section separately, and then merge the results back for a
logically consistent diff result.
To do this, add a new "diffanchors" option that takes a list of
`{address}`, and a new "diffopt" option value "anchor". Each address
specified will be an anchor, and the user can choose to use any type of
address, including marks, line numbers, or pattern search. Anchors are
sorted by line number in each file, and it's possible to have multiple
anchors on the same line (this is useful when doing multi-buffer diff).
Update documentation to provide examples.
This is similar to Git diff's `--anchored` flag. Other diff tools like
Meld/Araxis Merge also have similar features (called "synchronization
points" or "synchronization links"). We are not using Git/Xdiff's
`--anchored` implementation here because it has a very limited API
(it requires usage of the Patience algorithm, and can only anchor
unique lines that are the same across both files).
Because the user could anchor anywhere, diff anchors could result in
adjacent diff blocks (one block is directly touching another without a
gap), if there is a change right above the anchor point. We don't want
to merge these diff blocks because we want to line up the change at the
anchor. Adjacent diff blocks were first allowed when linematch was
added, but the existing code had a lot of branched paths where
line-matched diff blocks were handled differently. As a part of this
change, refactor them to have a more unified code path that is
generalized enough to handle adjacent diff blocks correctly and without
needing to carve in exceptions all over the place.
closes: vim/vim#176150d9160e11c
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: Currently terminal highlight attribute buffers are statically allocated
be the size of `TERM_ATTRS_MAX`. This unique case isn't respected in
some places in the ui_compositor. Due to this, when a terminal window
has lines longer them `TERM_ATTRS_MAX`, the compositor will go past the
end of the buffer causing a crash due to out of bounds access.
Solution: Add check to ensure we don't query terminal highlight attrs
past `TERM_ATTRS_MAX` in `win_line()`.
Fixes#30374
Problem: Search highlighting is applied strangely to the filler text of
transparent folds, and EOL list characters are not shown.
Solution: Don't apply search highlighting to the last column of the window row
if the last text char on the line is highlighted. Display the EOL list char if
needed. Don't highlight the entire filler text when matching EOL, just highlight
the EOL list char or the first filler char.
Problem: Wrong winline info after partial redraw. Setting
`conceal_cursor_used` is unnecessarily spread out.
Solution: Rather than adjusting `wl_lastlnum` for the previous
winline, adjust it when setting the current winline.
Set `conceal_cursor_used` when the current window is redrawn.
In a floating window grid, "wrap" flag should not
be set when vertical borders are used, as the the wrapped
text will be broken up by border chars.
fixes#33719
Problem: Inline virtual text placed in a decor provider callback
invalidates `w_virtcol`, which must be valid for `win_line()`.
Solution: Call `validate_virtcol()` after "line" decor provider callbacks.
Problem: Diff mode's inline highlighting is lackluster. It only
performs a line-by-line comparison, and calculates a single
shortest range within a line that could encompass all the
changes. In lines with multiple changes, or those that span
multiple lines, this approach tends to end up highlighting
much more than necessary.
Solution: Implement new inline highlighting modes by doing per-character
or per-word diff within the diff block, and highlight only the
relevant parts, add "inline:simple" to the defaults (which is
the old behaviour)
This change introduces a new diffopt option "inline:<type>". Setting to
"none" will disable all inline highlighting, "simple" (the default) will
use the old behavior, "char" / "word" will perform a character/word-wise
diff of the texts within each diff block and only highlight the
differences.
The new char/word inline diff only use the internal xdiff, and will
respect diff options such as algorithm choice, icase, and misc iwhite
options. indent-heuristics is always on to perform better sliding.
For character highlight, a post-process of the diff results is first
applied before we show the highlight. This is because a naive diff will
create a result with a lot of small diff chunks and gaps, due to the
repetitive nature of individual characters. The post-process is a
heuristic-based refinement that attempts to merge adjacent diff blocks
if they are separated by a short gap (1-3 characters), and can be
further tuned in the future for better results. This process results in
more characters than necessary being highlighted but overall less visual
noise.
For word highlight, always use first buffer's iskeyword definition.
Otherwise if each buffer has different iskeyword settings we would not
be able to group words properly.
The char/word diffing is always per-diff block, not per line, meaning
that changes that span multiple lines will show up correctly.
Added/removed newlines are not shown by default, but if the user has
'list' set (with "eol" listchar defined), the eol character will be be
highlighted correctly for the specific newline characters.
Also, add a new "DiffTextAdd" highlight group linked to "DiffText" by
default. It allows color schemes to use different colors for texts that
have been added within a line versus modified.
This doesn't interact with linematch perfectly currently. The linematch
feature splits up diff blocks into multiple smaller blocks for better
visual matching, which makes inline highlight less useful especially for
multi-line change (e.g. a line is broken into two lines). This could be
addressed in the future.
As a side change, this also removes the bounds checking introduced to
diff_read() as they were added to mask existing logic bugs that were
properly fixed in vim/vim#16768.
closes: vim/vim#168819943d4790e
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: Virtual 'statuscolumn' lines are evaluated with a misleading v:(rel)num.
Namely set to the line above for `virt_lines_above = true` lines, or even
the last drawn line for a partial redraw.
Solution: Set `v:lnum` for the first evaluated row of a line, first above
virtual line of a row and first non-virtual line of a row.
Problem: 'listchars' "precedes" is not drawn on Tabs.
Solution: Only draw 'listchars' "precedes" when not skipping over cells.
(zeertzjq)
fixes: vim/vim#5927closes: vim/vim#1669113f100e932
Problem: No test for 'listchars' "precedes" with double-width char.
Solution: Add a test and fix a typo in code (zeertzjq).
closes: vim/vim#1667508a83a033a
Cherry-pick test_listchars.vim changes from patch 9.0.0625.
Fix a regression from #30014 by moving the mb_schar assignment after the
double-width check.
Problem: Number and statuscolumn highlighting for virtual lines does
not take always take on numhl highlights.
Solution: Apply the appropriate numhl highlight to the number/statuscolumn
of virtual lines, fetching the numhl highlight of the line above
for `virt_line_above == false` lines.
Problem: completion doesn't work with multi lines
(Łukasz Jan Niemier)
Solution: handle linebreaks in completion code as expected
(glepnir)
fixes: vim/vim#2505closes: vim/vim#1537376bdb82527
Problem: Right aligned virtual text can cover up buffer text if virtual
text is too long
Solution: An additional option for `virt_text_pos` called
`eol_right_align` has been added to truncate virtual text if it would
have otherwise covered up buffer text. This ensures the virtual text
extends no further left than EOL.
Problem: A right-click on the 'statuscolumn' does not open the
popupmenu, even if a cell without a clickdef is clicked.
Clicking the %C fold item does not open/close the fold.
Solution: Open the popupmenu when there is no clickdef like right-clicking
the sign/numbercolumn does. Fill "linebuf_vcol" when drawing the
'statuscolumn' to handle foldcolumn item clicks.
Problem: Combined highlighting was not applied to nvim_eval_statusline(),
and 'statuscolumn' sign segment/numhl highlights.
Solution: Add an additional `groups` element to the return value of
`nvim_eval_statusline()->highlights`. This is an array of stacked
highlight groups (highest priority last). Also resolve combined
highlights for the 'statuscolumn' sign segment/numhl highlights.
Expose/synchronize some drawline.c logic that is now mimicked in
three different places.
If a "on_lines" callback changes the structure of the marktree, the
iterator (which is used for an entire window viewport) might now
point to invalid memory. Restore the iterator to the beginning of the
line in this case.
fixes#29484
Problem: completion may crash, completion highlight wrong with preview
window (after v9.1.0954)
Solution: correctly calculate scroll offset, check for preview window
when adding extra highlighting
(glepnir)
when there have a preview window prepare_tagpreview
will change curwin to preview window and this may cause
ComplMatchIns check condition not correct. check wp is curwin
and also the type of wp is not a preview or poup info
fixes: https://github.com/vim/vim/issues/16284
closes: https://github.com/vim/vim/pull/162838d0bb6dc9f
Problem: ComplMatchIns doesn't work after multibyte chars
(after v9.1.0936)
Solution: Use (ptr - line) instead of wlv.col (zeertzjq).
closes: vim/vim#16233f4ccada5c3
Problem: cannot highlight completed text
Solution: (optionally) highlight auto-completed text using the
ComplMatchIns highlight group (glepnir)
closes: vim/vim#161736a38aff218
Co-authored-by: glepnir <glephunter@gmail.com>
Problem:
Since e049c6e4c0, most statusline-like UI elements can combine
highlight attrs, except for sign/statuscolumn.
Solution:
Implement for sign/statuscolumn.
Problem: Option metadata like list of valid values for an option and
option flags are not listed in the `options.lua` file and are instead
manually defined in C, which means option metadata is split between
several places.
Solution: Put metadata such as list of valid values for an option and
option flags in `options.lua`, and autogenerate the corresponding C
variables and enums.
Supersedes #28659
Co-authored-by: glepnir <glephunter@gmail.com>
Problem: Crash with cursor-screenline and narrow window
(elig0n)
Solution: Don't set right_col when width2 is 0 (zeertzjq).
fixes: vim/vim#15677closes: vim/vim#1567859149f0269
Problem: Wrong cursor-screenline when resizing window
Solution: Invalidate saved left_col and right_col when width1 or width2
change.
closes: vim/vim#1567986dc4f8b43
Use the grapheme break algorithm from utf8proc to support grapheme
clusters from recent unicode versions.
Handle variant selector VS16 turning some codepoints into double-width
emoji. This means we need to use ptr2cells rather than char2cells when
possible.
Problem:
`'scrollbind'` does not work properly if the window being scrolled
automatically contains any filler/virtual lines (except for diff filler
lines).
This is because when the scrollbind check is done, the logic only
considers changes to topline which are represented as line numbers.
Solution:
Write the logic for determine the scroll amount to take into account
filler/virtual lines.
Fixes#29751
Problem:
Variables are often assigned multiple places in common patterns.
Solution:
Replace these common patterns with different patterns that reduce the
number of assignments.
Use `MAX` and `MIN`:
```c
if (x < y) {
x = y;
}
// -->
x = MAX(x, y);
```
```c
if (x > y) {
x = y;
}
// -->
x = MIN(x, y);
```
Use ternary:
```c
int a;
if (cond) {
a = b;
} els {
a = c;
}
// -->
int a = cond ? b : c;
```
Reduce calls to hasFolding() and remove the has_fold argument.
For lines that don't have virtual lines this should be more efficient as
it should avoid any calls to hasFolding(), whereas before it was called
at least once for any buffer containing at least one virtual line.
This will be slightly less efficient for lines with multiple virtual
lines marks as hasFolding() is called once for each mark. This could be
optimized, but having multiple virtual lines marks on a single line is
very rare.
Problem: A custom 'statuscolumn' needs to check a bunch of options and
placed signs to replicate the default number column.
Solution: Rework %l item to include the necessary logic to mimic the
default number column. Remove now redundant %r item.
Problem: too many strlen() calls in drawline.c
Solution: Refactor code to avoid strlen()
(John Marriott)
closes: vim/vim#14890f51ff96532
Co-authored-by: John Marriott <basilisk@internode.on.net>
