These are not needed after #35129 but making uncrustify still play nice
with them was a bit tricky.
Unfortunately `uncrustify --update-config-with-doc` breaks strings
with backslashes. This issue has been reported upstream,
and in the meanwhile auto-update on every single run has been disabled.
Problem:
Normally, `:drop +41 foo.txt` will open foo.txt with the cursor on line
41. But if foo.txt is already open, it instead is a no-op, even if the
cursor is on a different line.
Steps to reproduce:
nvim --clean foo.txt
:drop +30 foo.txt
Solution:
Handle +cmd in ex_drop().
Problem: Highlight group id is not propagated to the end of the message call
stack, where ext_messages are emitted.
Solution: Refactor message functions to pass along highlight group id
instead of attr id.
Problem: POSIX function name in exarg struct causes issues
on OpenVMS
Solution: Rename getline member in exarg struct to ea_getline,
remove isinf() workaround for VMS
There are compilers that do not treat well POSIX functions - like
getline - usage in the structs.
Older VMS compilers could digest this... but the newer OpenVMS compilers
( like VSI C x86-64 X7.4-843 (GEM 50XB9) ) cannot deal with these
structs. This could be limited to getline() that is defined via
getdelim() and might not affect all POSIX functions in general - but
avoiding POSIX function names usage in the structs is a "safe side"
practice without compromising the functionality or the code readability.
The previous OpenVMS X86 port used a workaround limiting the compiler
capabilities using __CRTL_VER_OVERRIDE=80400000
In order to make the OpenVMS port future proof, this pull request
proposes a possible solution.
closes: vim/vim#137046fdb628082
Co-authored-by: Zoltan Arpadffy <zoltan.arpadffy@gmail.com>
Problem: File name entered in GUI dialog is ignored (after v9.1.0265)
Solution: Only set file name to "Untitled" if GUI dialog didn't set it.
(zeertzjq)
closes: vim/vim#14417c20bdf1107
Problem: console dialog cannot save unnamed buffers
Solution: set bufname before save (glepnir). Define dialog_con_gui
to test for GUI+Console dialog support, use it to skip
the test when the GUI feature has been defined.
Note: The dialog_changed() function will also try to call the
browse_save_fname() function, when FEAT_BROWSE is defined (which is only
defined in a GUI build of Vim). This will eventually lead to a call of
do_browse(), which causes an error message if a GUI is not currently
running (see the TODO: in do_browse()) and will then lead to a failure
in Test_goto_buf_with_onfirm().
Therefore, we must disable the Test_goto_buf_with_onfirm(), when the
dialog_con_gui feature is enabled (which basically means dialog feature
for GUI and Console builds, in contrast to the dialog_con and dialog_gui
feature).
(Previously this wasn't a problem, because the test aborted in the YES
case for the :confirm :b XgotoConf case and did therefore not run into
the browse function call)
closes: vim/vim#14398df46115fc8
Co-authored-by: glepnir <glephunter@gmail.com>
Problem: memleak with ex_drop(), NULL dereference
(zeertzjq)
Solution: revert back to ex_rewind(), use curbuf instead of buf
fixes: vim/vim#14246closes: vim/vim#1425185a769d466
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: :drop tries to :rewind the argumentlist, which results in E37
(after v9.1.0046)
Solution: instead of calling ex_rewind(), call open_buffer() only when
re-using the initial empty buffer
fixes: vim/vim#14219closes: vim/vim#14220978178823b
Co-authored-by: Christian Brabandt <cb@256bit.org>
A lot of functions in move.c only worked for curwin, alternatively
took a `wp` arg but still only work if that happens to be curwin.
Refactor those that are needed for update_topline(wp) to work
for any window.
fixes#27723fixes#27720
Problem: may not be clear why failing to split causes an ":Xdo" command
to abort if 'wfb' is set.
Solution: do not return immediately if win_split fails, so E1513 is
still given. Expect both errors in the test. Also fix tests to
pass CI.
(Sean Dewar)
closes: vim/vim#14152769eb2d0c3
Co-authored-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Problem: Coverity complains about ignoring return value of win_split()
(after v9.1.150)
Solution: Check if win_split() failed, add winfixbuf.res to Makefile
af7ae81600
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: several minor 'winfixbuf' issues exist, mostly relating to the
quickfix list
Solution: address them and adjust tests. Retab and reflow a few things too.
(Sean Dewar)
Things touched include:
- Replace the semsgs with gettext'd emsgs.
- Handle window switching in ex_listdo properly, so curbuf and curwin
are kept in-sync and trigger autocommands; handle those properly.
- Don't change the list entry index in qf_jump_edit_buffer if we fail
due to 'wfb' (achieved by returning FAIL; QF_ABORT should only be used
if the list was changed).
- Make qf_jump_edit_buffer actually switch to prevwin when using `:cXX`
commands **outside** of the list window if 'wfb' is set in curwin.
Handle autocommands properly in case they mess with the list.
NOTE: previously, it seemed to split if 'wfb' was set, but do nothing
and fail if prevwin is *valid*. This behaviour seemed strange, and maybe
unintentional? Now it aligns more with what's described for the `:cXX`
commands in the original PR description when used outside a list window,
I think.
- In both functions, only consider prevwin if 'wfb' isn't set for it;
fallback to splitting otherwise.
- Use win_split to split. Not sure if there was a specific reason for
using ex_splitview. win_split is simpler and respects modifiers like
:vertical that may have been used. Plus, its return value can be checked
for setting opened_window in qf code (technically win_split_ins autocmds
could immediately close it or change windows, in which the qf code might
close some other window on failure; it's already the case elsewhere,
though).
closes: vim/vim#141424bb505e28c
Co-authored-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Problem:
- Navigation is not always symmetric: pressing Ctrl+o n times followed
by Ctrl+i n times does not always gets me back to where I started.
- Invalid buffers are not skipped by Ctrl+i/o, I have to press Ctrl+i/o
multiple times to get to the next/previous buffer.
Solution:
- Remove all entries of a buffer from the jump list when deleting it.
- Don't add a new entry to the jump list if the next buffer to be
displayed is already in the jump list.
Closes#25365
Remove `export` pramgas from defs headers as it causes IWYU to believe
that the definitions from the defs headers comes from main header, which
is not what we really want.
We already have an extensive suite of static analysis tools we use,
which causes a fair bit of redundancy as we get duplicate warnings. PVS
is also prone to give false warnings which creates a lot of work to
identify and disable.
- Move vimoption_T to option.h
- option_defs.h is for option-related types
- option_vars.h corresponds to Vim's option.h
- option_defs.h and option_vars.h don't include each other
This was only used to avoid the effect of SHM_OVERALL. This can easily
be handled in isolation, instead of clearing out all of 'shortmess' which
has unwanted side effects and mystifies what really is going on.
* perf(rtp): reduce rtp scans
Problem:
Scanning the filesystem is expensive and particularly affects
startuptime.
Solution:
Reduce the amount of redundant directory scans by relying less on glob
patterns and handle vim and lua sourcing lower down.
Problem: Code for making 'shortmess' temporarily empty is repeated.
Solution: Add functions for making 'shortmess' empty and restoring it.
(Christian Brabandt, closesvim/vim#11709)
9aee8ec400
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Code is indented more than needed.
Solution: Use an early return to reduce indenting. (Yegappan Lakshmanan,
closesvim/vim#11758)
ed0c1d5d4b
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Using one window for executing autocommands is insufficient.
Solution: Use up to five windows for executing autocommands.
e76062c078
N/A patches for version.c:
vim-patch:9.0.0966: some compilers don't allow a declaration after a label
Problem: Some compilers don't allow a declaration after a label.
Solution: Move the declaration to the start of the block. (John Marriott)
f86490ed4f
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Allow Include What You Use to remove unnecessary includes and only
include what is necessary. This helps with reducing compilation times
and makes it easier to visualise which dependencies are actually
required.
Work on https://github.com/neovim/neovim/issues/549, but doesn't close
it since this only works fully for .c files and not headers.
