These are not needed after #35129 but making uncrustify still play nice
with them was a bit tricky.
Unfortunately `uncrustify --update-config-with-doc` breaks strings
with backslashes. This issue has been reported upstream,
and in the meanwhile auto-update on every single run has been disabled.
Problem: Functions used in one file are global.
Solution: Add "static". (Yegappan Lakshmanan, closesvim/vim#4840)
5843f5f37b
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: The indent.c file is a bit big.
Solution: Move C-indent code a a new cindent.c file. Move other
indent-related code to indent.c. (Yegappan Lakshmanan,
closesvim/vim#5031)
14c01f8348
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: too many strlen() calls in indent.c
Solution: refactor indent.c slightly and remove strlen() calls
(John Marriott)
closes: vim/vim#17156eac45c558e
Co-authored-by: John Marriott <basilisk@internode.on.net>
Problem: When calling an API from Vimscript to set an option, mapping,
etc., :verbose shows that it's set from an API client.
Solution: Don't override current_sctx.sc_sid when calling an API from
Vimscript. Also fix the inverse case where API channel id is
not set when calling an API from RPC. Move channel id into
sctx_T to make saving and restoring easier.
Related #8329
Problem: Option metadata like list of valid values for an option and
option flags are not listed in the `options.lua` file and are instead
manually defined in C, which means option metadata is split between
several places.
Solution: Put metadata such as list of valid values for an option and
option flags in `options.lua`, and autogenerate the corresponding C
variables and enums.
Supersedes #28659
Co-authored-by: glepnir <glephunter@gmail.com>
Problem:
The way option scopes currently work is inflexible and does not allow for nested
option scopes or easily finding the value of an option at any arbitrary scope
without having to do long handwritten switch-case statements like in
`get_varp()`. `.indir` is also confusing and redundant since option indices for
each scope can be autogenerated.
Solution:
Expand option scopes in such a way that an option can support any amount of
scopes using a set of scope flags, similarly to how it's already done for option
types. Also make options contain information about its index at each scope it
supports. This allows for massively simplifying `get_varp()` and
`get_varp_scope()` in the future by just using a struct for options at each
scope. This would be done by creating a table that stores the offset of an
option's variable at a scope by using the option's index at that scope as a key.
This PR also autogenerates enums for option indices at each scope to remove the
need for `.indir` entirely, and also to allow easily iterating over options all
options that support any scope.
Ref: #29314
Problem: tests: no error check when setting global 'briopt'
Solution: also parse and check global 'briopt' value (Milly)
closes: vim/vim#15911b38700ac81
Co-authored-by: Milly <milly.ca@gmail.com>
Problem: Wrong breakindentopt=list:-1 with multibyte chars or TABs in
text matched by 'formatlistpat' (John M Devin)
Solution: Use the width of the match text (zeertzjq)
fixes: vim/vim#15634closes: vim/vim#1563561a6ac4d00
Problem: Left shift is incorrect with vartabstop and shiftwidth=0
Solution: make tabstop_at() function aware of shift direction
(Gary Johnson)
The problem was that with 'vartabstop' set and 'shiftwidth' equal 0,
left shifts using << were shifting the line to the wrong column. The
tabstop to the right of the first character in the line was being used
as the shift amount instead of the tabstop to the left of that first
character.
The reason was that the tabstop_at() function always returned the value
of the tabstop to the right of the given column and was not accounting
for the direction of the shift.
The solution was to make tabstop_at() aware of the direction of the
shift and to choose the tabtop accordingly.
A test was added to check this behavior and make sure it doesn't
regress.
While at it, also fix a few indentation/alignment issues.
fixes: vim/vim#14864closes: vim/vim#1488788d4f255b7
Co-authored-by: Gary Johnson <garyjohn@spocom.com>
Problem: Unnecessary multiplications in backspace code, as
"col / ts * ts" is the same as "col - col % ts".
Solution: Change "col / ts * ts" to "col - col % ts". Adjust the loop
and the comments ins_bs() to be easier to understand. Update
tests to reset 'smarttab' properly.
(zeertzjq)
closes: vim/vim#143088ede7a0694
Problem: `set_string_option_direct()` contains a separate codepath specifically for setting string options. Not only is that unnecessary code duplication, but it's also limited to only string options.
Solution: Replace `set_string_option_direct()` with `set_option_direct()` which calls `set_option()` under the hood. This reduces code duplication and allows directly setting an option of any type.
A lot of functions in move.c only worked for curwin, alternatively
took a `wp` arg but still only work if that happens to be curwin.
Refactor those that are needed for update_topline(wp) to work
for any window.
fixes#27723fixes#27720
Problem: 'breakindentopt' "min" works incorrectly with 'signcolumn'.
Solution: Use win_col_off() and win_col_off2().
(zeertzjq)
closes: vim/vim#14014f0a9d65e0a
Problem: 'breakindent' behaves inconsistently with 'list' and splits.
Solution: Use 'listchars' from the correct window and handle caching
properly. Move cheaper comparisons to the top.
(zeertzjq)
closes: vim/vim#14008efabd7c8d4
The `get_indent_str_vtab()` function currently calls `tabstop_padding()`
every time a tab is encountered (unless tabstops aren't used).
`tabstop_padding()` either does a division by 'tabstop' If 'vartabstop'
is not set, or iterates through the 'vartabstop' list to find current
tab width.
Since the virtual column only increases, we can keep track of where the
next tabstop would be, and update this information once it was reached.
`get_indent_str_vtab()` also depends on 'listchars' "tab" value from the
current window, even though it may be called for a line from the same
buffer in a different window. In most cases, it is called with tabstops
enabled (last argument was `false`), so I split the function into one
that uses tabstops and the other that doesn't.
I removed `get_indent_str()` since I couldn't find any calls to it.
Remove `export` pramgas from defs headers as it causes IWYU to believe
that the definitions from the defs headers comes from main header, which
is not what we really want.
Problem: Many places in the code use `findoption()` to access an option using its name, even if the option index is available. This is very slow because it requires looping through the options array over and over.
Solution: Use option index instead of name wherever possible. Also introduce an `OptIndex` enum which contains the index for every option as enum constants, this eliminates the need to pass static option names as strings.
FUNC_ATTR_* should only be used in .c files with generated headers.
Defining FUNC_ATTR_* as empty in headers causes misuses of them to be
silently ignored. Instead don't define them by default, and only define
them as empty after a .c file has included its generated header.
We already have an extensive suite of static analysis tools we use,
which causes a fair bit of redundancy as we get duplicate warnings. PVS
is also prone to give false warnings which creates a lot of work to
identify and disable.
long is 32 bits on windows, while it is 64 bits on other architectures.
This makes the type suboptimal for a codebase meant to be
cross-platform. Replace it with more appropriate integer types.
long is 32 bits on windows, while it is 64 bits on other architectures.
This makes the type suboptimal for a codebase meant to be
cross-platform. Replace it with more appropriate integer types.
Problem: cannot complete option values
Solution: Add completion functions for several options
Add cmdline tab-completion for setting string options
Add tab-completion for setting string options on the cmdline using
`:set=` (along with `:set+=` and `:set-=`).
The existing tab completion for setting options currently only works
when nothing is typed yet, and it only fills in with the existing value,
e.g. when the user does `:set diffopt=<Tab>` it will be completed to
`set diffopt=internal,filler,closeoff` and nothing else. This isn't too
useful as a user usually wants auto-complete to suggest all the possible
values, such as 'iblank', or 'algorithm:patience'.
For set= and set+=, this adds a new optional callback function for each
option that can be invoked when doing completion. This allows for each
option to have control over how completion works. For example, in
'diffopt', it will suggest the default enumeration, but if `algorithm:`
is selected, it will further suggest different algorithm types like
'meyers' and 'patience'. When using set=, the existing option value will
be filled in as the first choice to preserve the existing behavior. When
using set+= this won't happen as it doesn't make sense.
For flag list options (e.g. 'mouse' and 'guioptions'), completion will
take into account existing typed values (and in the case of set+=, the
existing option value) to make sure it doesn't suggest duplicates.
For set-=, there is a new `ExpandSettingSubtract` function which will
handle flag list and comma-separated options smartly, by only suggesting
values that currently exist in the option.
Note that Vim has some existing code that adds special handling for
'filetype', 'syntax', and misc dir options like 'backupdir'. This change
preserves them as they already work, instead of converting to the new
callback API for each option.
closes: vim/vim#13182900894b09a
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
