Problem: The legacy signlist data structures and associated functions are
redundant since the introduction of extmark signs.
Solution: Store signs defined through the legacy commands in a hashmap, placed
signs in the extmark tree. Replace signlist associated functions.
Usage of the legacy sign commands should yield no change in behavior with the
exception of:
- "orphaned signs" are now always removed when the line it is placed on is
deleted. This used to depend on the value of 'signcolumn'.
- It is no longer possible to place multiple signs with the same identifier
in a single group on multiple lines. This will now move the sign instead.
Moreover, both signs placed through the legacy sign commands and through
|nvim_buf_set_extmark()|:
- Will show up in both |sign-place| and |nvim_buf_get_extmarks()|.
- Are displayed by increasing sign identifier, left to right.
Extmark signs used to be ordered decreasingly as opposed to legacy signs.
Problem: buffer text with composing chars are converted from UTF-8
to an array of up to seven UTF-32 values and then converted back
to UTF-8 strings.
Solution: Convert buffer text directly to UTF-8 based schar_T values.
The limit of the text size is now in schar_T bytes, which is currently
31+1 but easily could be raised as it no longer multiplies the size
of the entire screen grid when not used, the full size is only required
for temporary scratch buffers.
Also does some general cleanup to win_line text handling, which was
unnecessarily complicated due to multibyte rendering being an "opt-in"
feature long ago. Nowadays, a char is just a char, regardless if it consists
of one ASCII byte or multiple bytes.
Problem:
'nofsync' may lose data if the system has a hard shutdown. #9888
Solution:
Change default to 'fsync'. This may be revisited in the future when
'nofsync' can be made safer.
Problem: statusline may look different than expected
Solution: do not check for highlighting of stl and stlnc characters
statusline fillchar may be different than expected
If the highlighting group for the statusline for the current window
|hl-StatusLine| or the non-current window |hl-StatusLineNC| are cleared
(or do not differ from each other), than Vim will use the hard-coded
fallback values '^' (for the non-current windows) or '=' (for the
current window). I believe this was done, to make sure the statusline
will always be visible and be distinguishable from the rest of the
window.
However, this may be unexpected, if a user explicitly defined those
fillchar characters just to notice that those values are then not used
by Vim.
So, let's assume users know what they are doing and just always return
the configured stl and stlnc values. And if they want the statusline to
be non-distinguishable from the rest of the window space, so be it. It
is their responsibility and Vim shall not know better what to use.
fixes: vim/vim#13366closes: vim/vim#134886a650bf696
Co-authored-by: Christian Brabandt <cb@256bit.org>
When the terminal emulator sends an OSC sequence to Nvim (as a response
to another OSC sequence that was first sent by Nvim), populate the OSC
sequence in the v:termresponse variable and fire the TermResponse event.
The escape sequence is also included in the "data" field of the
autocommand callback when the autocommand is defined in Lua.
This makes use of the already documented but unimplemented TermResponse
event. This event exists in Vim but is only fired when Vim receives a
primary device attributes response.
Fixes: https://github.com/neovim/neovim/issues/25856
While the interfaces for setting number and boolean options are now unified by #25394, there is still a separate `set_string_option` function that is used for setting a string option. This PR removes that function and merges it with set_option.
BREAKING CHANGE: `v:option_old` is now the old global value for all global-local options, instead of just string global-local options. Local value for a global-local number/boolean option is now unset when the option is set (e.g. using `:set` or `nvim_set_option_value`) without a scope, which means they now behave the same way as string options.
Ref: #25672
BREAKING CHANGE: This breaks the OptionSet autocommand, as the `v:` values associated with it (`v:option_new`, `v:option_old`, `v:option_oldlocal` and `v:option_oldglobal`) are now the same type as the option, instead of all option values being converted to strings.
Problem:
On Windows, "gf" fails on a filepath that has a line:column suffix.
Example:
E447: Can't find file "src/app/core/services/identity/identity.service.ts:64:23"
Solution:
- Remove ":" from 'isfname' on Windows. Colon is not a valid filename
character (except for the drive-letter).
- Handle drive letters specially in file_name_in_line().
Fixes#25160
Problem:
The swapfile "E325: ATTENTION" dialog is displayed when editing a file
already open in another (running) Nvim. Usually this behavior is
annoying and irrelevant:
- "Recover" and the other options ("Open readonly", "Quit", "Abort") are
almost never wanted.
- swapfiles are less relevant for "multi-Nvim" since 'autoread' is
enabled by default.
- Even less relevant if user enables 'autowrite'.
Solution:
Define a default SwapExists handler which does the following:
1. If the swapfile is owned by a running Nvim process, automatically
chooses "(E)dit anyway" (caveat: this creates a new, extra swapfile,
which is mostly harmless and ignored except by `:recover` or `nvim -r`.
2. Shows a 1-line "ignoring swapfile..." message.
3. Users can disable the default SwapExists handler via `autocmd! nvim_swapfile`.
A lot of updated places in the docs were already incorrect since long
since they did not reflect the default behaviour.
"[dos format]" could've been argued being better for discoverability
but that ship has already sailed as it is no longer displayed by default.
Oldtests clean up after themselves, and the options that need operators
to align with Vim all deny duplicates, so there is no need to set them
to default.
Also make the variable name that test_listchars.vim uses to align with
Vim more obvious.
Not everything needs to be crazy overconfigurable.
Also fixes a warning in latest clang which didn't approve of
the funky math switch statement in append_arg_number
Problem: SafeState may be triggered at the wrong moment.
Solution: Move it up higher to after where messages are processed. Add a
SafeStateAgain event to tigger there.
69198cb8c0
SafeStateAgain is N/A.
Move SafeState functions to state.c.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: '.-' no allowed in highlight group names
Solution: Allow dot and hyphen characters in highlight group names
Allow dots and hyphens in group names. There does not seem
to be any reason for these to be disallowed.
closes: vim/vim#12807d4376dc3eb
Co-authored-by: Gregory Anders <greg@gpanders.com>
Co-authored-by: Sean Dewar <seandewar@users.noreply.github.com>
Problem: Temporarily changing current window in a script causes
CursorMoved to be triggerd.
Solution: Don't trigger CursorMoved if neither curwin nor cursor
changed between two checks.
Problem:
Nvim docs use "•" as a list item prefix but `gw{motion}` doesn't format
such lists by default.
Solution:
Change the 'comments' option to include "fb:•" by default.
Problem:
The parent commit added a new vim.get_visual_selection() function to
improve visual star. But that is redundant with vim.region(). Any
current limitations of vim.region() should be fixed instead of adding
a new function.
Solution:
Delete vim.get_visual_selection().
Use vim.region() to get the visual selection.
TODO: fails with visual "block" selections.
Problem:
Visual mode "*", "#" mappings don't work on text with "/", "\", "?", and
newlines.
Solution:
Get the visual selection and escape it as a search pattern.
Add functions vim.get_visual_selection and _search_for_visual_selection.
Fix#21676
Enforce consistent terminology (defined in
`gen_help_html.lua:spell_dict`) for common misspellings.
This does not spellcheck English in general (perhaps a future TODO,
though it may be noisy).
- quickstart
- mark lsp.txt as `new_layout`
- remove lsp-handler documentation for notifications: they don't have
handlers because they don't have server responses.
Co-authored by: zeertzjq <zeertzjq@outlook.com>
Co-authored by: Steven Todd McIntyre II <114119064+stmii@users.noreply.github.com>
Co-authored by: nobe4 <nobe4@users.noreply.github.com>
- docs: mention --luadev-mod to run with lua runtime files
When changing a lua file in the ./runtime folder, a new contributor
might expect changes to be applied to the built Neovim binary.
The options 'path', 'include', and 'define' all use C-specific default
values. This may have made sense a long time ago when Vim was mostly
used just for writing C, but this is no longer the case, and we have
ample support for filetype specific configuration. Make the default
values of these options empty and move the C-specific values into a
filetype plugin where they belong.
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem:
Completion messages such as "scanning tags" are noisy and generally not
useful on most systems. Most users probably aren't aware that this is
configurable.
Solution:
Set `shortmess+=C`.
Vimball is an outdated feature that is rarely used these days. It is not
a maintenance burden on its own, but it is nonetheless dead weight and
something we'd need to tell users to ignore when they inevitably ask
what it is.
See: https://github.com/neovim/neovim/pull/21369#issuecomment-1347615173
