Problem: 'showcmd' is wrong for partial mapping with multibyte char,
and isn't very readable with modifyOtherKeys.
Solution: Decode multibyte char and merge modifiers into the char.
(zeertzjq)
This improves the following situations:
- Multibyte chars whose individual bytes are considered unprintable are
now shown properly in 'showcmd' area.
- Ctrl-W with modifyOtherKeys now shows ^W in 'showcmd' area.
The following situation may still need improvement:
- If the char is a special key or has modifiers that cannot be merged
into it, internal keycodes are shown in 'showcmd' area like before.
This applies to keys typed in Normal mode commands as well, and it's
hard to decide how to make it more readable due to the limited space
taken by 'showcmd', so I'll leave it for later.
closes: vim/vim#14572acdfb8a979
Problem: Renaming non-current buffer changes working directory when
'autochdir' is set.
Solution: Temporarily disable 'autochdir'. Add more tests for the
win_set_buf change.
- Test maparg() and maplist() in the same test.
- Use matches() instead of string.match().
- Avoid overlong lines and strange spacing in exec_lua().
- Revert code change from last PR as the variable may be needed.
Problem:
vim.diagnostic.enable() does not match the signature of vim.lsp.inlay_hint.enable()
Solution:
- Change the signature so that the first 2 args are (bufnr, enable).
- Introduce a 3rd `opts` arg.
- Currently it only supports `opts.ns_id`.
Problem:
`vim.diagnostic.is_disabled` and `vim.diagnostic.disable` are unnecessary
and inconsistent with the "toggle" pattern (established starting with
`vim.lsp.inlay_hint`, see https://github.com/neovim/neovim/pull/25512#pullrequestreview-1676750276
As a reminder, the rationale is:
- we always need `enable()`
- we always end up needing `is_enabled()`
- "toggle" can be achieved via `enable(not is_enabled())`
- therefore,
- `toggle()` and `disable()` are redundant
- `is_disabled()` is a needless inconsistency
Solution:
- Introduce `vim.diagnostic.is_enabled`, and `vim.diagnostic.enable(…, enable:boolean)`
- Note: Future improvement would be to add an `enable()` overload `enable(enable:boolean, opts: table)`.
- Deprecate `vim.diagnostic.is_disabled`, `vim.diagnostic.disable`
Problem:
vim.ui.open "locks up" Nvim if the spawned process does not terminate. #27986
Solution:
- Change `vim.ui.open()`:
- Do not call `wait()`.
- Return a `SystemObj`. The caller can decide if it wants to `wait()`.
- Change `gx` to `wait()` only a short time.
- Allows `gx` to show a message if the command fails, without the
risk of waiting forever.
Problem: String interpolation fails for Dict type
Solution: Support Dict data type properly, also support :put =Dict
(without having to convert it to string() first)
(Yegappan Lakshmanan)
fixes: vim/vim#14529closes: vim/vim#14541f01493c550
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: noautocmd is confusing; despite its name, it doesn't block all
autocommands (instead it blocks only those related to setting the buffer), and
is commonly used by plugins to open windows while producing minimal
side-effects.
Solution: be consistent and block all autocommands when noautocmd is set.
This includes WinNew (again), plus autocommands from entering the window (if
enter is set) like WinEnter, WinLeave, TabEnter, .etc.
See the discussion at https://github.com/neovim/neovim/pull/14659#issuecomment-2040029517
for more information.
Remove win_set_buf's noautocmd argument, as it's no longer needed.
NOTE: pum_create_float_preview sets noautocmd for win_set_buf, but all its
callers already use block_autocmds.
Despite that, pum_create_float_preview doesn't actually properly handle
autocommands (it has no checks for whether those from win_enter or
nvim_create_buf free the window).
For now, ensure autocommands are blocked within it for correctness (in case it's
ever called outside of a block_autocmds context; the function seems to have been
refactored in #26739 anyway).
This reverts commit 4382d2ed56.
The story for this feature was left in an incomplete state. It was never
the intention to unilaterally fold all information, only the ones that
did not contain relevant information. This feature does more harm than
good in its incomplete state.
Run the global before_each() before all other before_each(), so that
clear() uses the test ID of the current test, not the previous one.
Don't skip generating test IDs for skipped tests, as that'll make a
skipped test have the same test ID as the previous one.
Problem:
Decoration provider `on_line` handler is invoked for diff filler line
below the last buffer line. This does not match the documentation:
"called for each buffer line".
Solution:
Check `end_fill`.
Problem: when reconfig current float win without win key in nvim_win_set_config will cause float win position changed when move.
Solution: don't relative itself.
Problem: "zb" does not reveal filler lines at the start of a buffer.
Scrolled cursor position with 'smoothscroll' is unpredictable,
and may reset skipcol later if it is not visible (after v9.1.258)
Solution: Replace confusing for loop that reaches final control value too
early with while loop. Set "w_curswant" accordingly so cursor
will be placed in visible part of topline.
(Luuk van Baal)
bd28cae1f1
Problem: Support for 'smoothscroll' in (half-)page scrolling
broke backward compatibility and can be made to work better.
(after v9.1.215)
Solution: Restore the previous cursor and end-of-buffer behavior for
half-page scrolling and improve 'smoothscroll' support.
(Luuk van Baal)
cb204e688e
Also close Nvim instance before removing log file, otherwise the Nvim
instance will still write to the log file.
Also adjust log level in libuv_process_spawn(). Ref #27660
Design
- Enable commenting support only through `gc` mappings for simplicity.
No ability to configure, no Lua module, no user commands. Yet.
- Overall implementation is a simplified version of 'mini.comment'
module of 'echasnovski/mini.nvim' adapted to be a better suit for
core. It basically means reducing code paths which use only specific
fixed set of plugin config.
All used options are default except `pad_comment_parts = false`. This
means that 'commentstring' option is used as is without forcing single
space inner padding.
As 'tpope/vim-commentary' was considered for inclusion earlier, here is
a quick summary of how this commit differs from it:
- **User-facing features**. Both implement similar user-facing mappings.
This commit does not include `gcu` which is essentially a `gcgc`.
There are no commands, events, or configuration in this commit.
- **Size**. Both have reasonably comparable number of lines of code,
while this commit has more comments in tricky areas.
- **Maintainability**. This commit has (purely subjectively) better
readability, tests, and Lua types.
- **Configurability**. This commit has no user configuration, while
'vim-commentary' has some (partially as a counter-measure to possibly
modifying 'commentstring' option).
- **Extra features**:
- This commit supports tree-sitter by computing `'commentstring'`
option under cursor, which can matter in presence of tree-sitter
injected languages.
- This commit comments blank lines while 'tpope/vim-commentary' does
not. At the same time, blank lines are not taken into account when
deciding the toggle action.
- This commit has much better speed on larger chunks of lines (like
above 1000). This is thanks to using `nvim_buf_set_lines()` to set
all new lines at once, and not with `vim.fn.setline()`.
Problem:
Some servers don't report progress during initialize unless the client
sets the `workDoneToken`
See https://microsoft.github.io/language-server-protocol/specifications/lsp/3.17/specification/#initiatingWorkDoneProgress
In particular:
> There is no specific client capability signaling whether a client will
> send a progress token per request. The reason for this is that this is
> in many clients not a static aspect and might even change for every
> request instance for the same request type. So the capability is signal
> on every request instance by the presence of a workDoneToken property.
And:
> Servers can also initiate progress reporting using the
> window/workDoneProgress/create request. This is useful if the server
> needs to report progress outside of a request (for example the server
> needs to re-index a database). The token can then be used to report
> progress using the same notifications used as for client initiated
> progress.
So far progress report functionality was relying entirely on the latter.
Solution:
Set a `workDoneToken`
Closes https://github.com/neovim/neovim/issues/27938
Ref #21393
- Move default user commands to _defaults.lua as that now contains all
kinds of defaults rather than just default mappings and menus.
- Remove the :aunmenu as there are no menus when _defaults.lua is run.
Problem: Dialog for file changed outside of Vim not tested.
Solution: Add a test. Move FileChangedShell test. Add 'L' flag to
feedkeys().
5e66b42aae
Co-authored-by: Bram Moolenaar <Bram@vim.org>
`exec_lua` makes code slighly harder to read, so it's beneficial to
remove it in cases where it's possible or convenient.
Not all `exec_lua` calls should be removed even if the test passes as it
changes the semantics of the test even if it happens to pass.
From https://github.com/neovim/neovim/pull/28155#discussion_r1548185779:
"Note for tests like this, which fundamentally are about conversion, you
end up changing what conversion you are testing. Even if the result
happens to be same (as they often are, as we like the rules to be
consistent if possible), you are now testing the RPC conversion rules
instead of the vim script to in-process lua conversion rules."
From https://github.com/neovim/neovim/pull/28155#discussion_r1548190152:
"A test like this specifies that the cursor is valid immediately and not
after a separate cycle of normal (or an other input-processing) mode."
