Problem:
Buffer-updates on_detach callback is invoked before buf_freeall(), which
deletes autocmds of the buffer (via apply_autocmds(EVENT_BUFWIPEOUT,
...)). Due to this, buffer-local autocmds executed in on_detach (e.g.,
LspDetach) are not actually invoked.
Solution:
Call buf_updates_unload() before buf_freeall().
(cherry picked from commit 285c04e2d0)
Co-authored-by: Jaehwang Jung <tomtomjhj@gmail.com>
Problem: tests: test_search leaves a few swapfiles behind
Solution: Use :bw! instead of :close to close the swapfile at the end of
the test.
related: vim/vim#17933a2bb21a895
Co-authored-by: Christian Brabandt <cb@256bit.org>
(cherry picked from commit 9e8d551b1e)
Problem: Ctrl-G/Ctrl-T does not ignore the end search delimiter
(irisjae)
Solution: Check if the pattern ends with a search delimiter and ignore
it, unless it is part of the pattern.
fixes: vim/vim#17895closes: vim/vim#17933c03990d30f
Co-authored-by: Christian Brabandt <cb@256bit.org>
(cherry picked from commit 1eca030fb2)
Problem: The :keep{alt,jumps,marks,patterns} commmands are sometimes
misidentified as :k.
Solution: Make sure one_letter_cmd() only returns true for :k and not
other :keep* commands (Doug Kearns).
This currently manifests as missing completion for :keep* commands and
incorrect results from fullcommand().
E.g., fullcommand("keepmarks") returns "k" rather than "keepmarks".
The correct command, however, is executed as command modifiers are
handled specially in do_one_cmd() rather than using find_ex_command().
Fix exists(':k') so that it returns 2 for a full match.
closes: vim/vim#15742ea84202372
Cherry-pick Test_ex_command_completion() from patch 9.1.0624.
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
(cherry picked from commit 70bb7999f7)
Problem: Patch v8.1.0425 was wrong
Solution: Revert that patch (Hirohito Higashi)
This is because the root cause was fixed in 8.1.0786 and a regression
occurred elsewhere.
related: vim/vim#3455
related: vim/vim#3830fixes: vim/vim#11558closes: vim/vim#178996abe5e4904
Co-authored-by: Hirohito Higashi <h.east.727@gmail.com>
(cherry picked from commit 7230296bdb)
Problem: :bnext doesn't go to unlisted help buffers when cycling
through help buffers (after 9.1.0557).
Solution: Don't check if a help buffer is listed (zeertzjq).
From <https://github.com/vim/vim/issues/4478#issuecomment-498831057>:
> I think we should fix that, since once you get to a non-help buffer
> all unlisted buffers are skipped, thus you won't encounter another
> help buffer.
This implies that cycling through help buffers should work even if help
buffers are unlisted. Otherwise this part of :bnext isn't really useful,
as :h makes help buffers unlisted by default.
related: vim/vim#4478
related: vim/vim#15198closes: vim/vim#179139662f33480
(cherry picked from commit 53ac2ad20a)
Problem:
Cursor is visible in "hidden" floating window.
Solution:
Hide cursor when curwin is a hidden floating window.
Show cursor after returning to a normal (non-hidden) window.
(cherry picked from commit d4f2b9050d)
Co-authored-by: glepnir <glephunter@gmail.com>
- Add delimiter between function signature and documentation, matching hover formatting
- Show title only if there are multiple clients or multiple signatures
- Avoid duplicating the title inside the window if it's already shown in the border
(cherry picked from commit d26db4bfbf)
Problem: make_floating_popup_options only shows when opts.border is explicitly set, ignoring global winborder setting
Solution: check both opts.border and vim.o.winborder when determining whether to show title
(cherry picked from commit 5b1b46ea5a)
Problem: Using `addr` without `range` in nvim_create_user_command gives
"No range allowed" error, inconsistent with `:command -addr` behavior.
Solution: Set EX_RANGE flag when `addr` option is specified to match
`:command` behavior.
(cherry picked from commit 22df649210)
Avoid duplicate text when jumping back to a choice node. Set cursor to
end of tabstop range and prioritize current choice in completion items.
(cherry picked from commit 628d569a59)
When right_gravity is set to true for deactivating tabstop expansion we
have to set end_right_gravity to false to avoid expanding the tabstop
region on the right side. Vice versa for activating tabstop expansion
again.
(cherry picked from commit dff78f580d)
Problem: After filtering out all elements, ArrayIter:last still returns a stale element.
Solution: Add check for self._head == self._tail and return nil early.
Fix#34696
(cherry picked from commit 4fe51dfdae)
Problem:
From https://matrix.to/#/!cylwlNXSwagQmZSkzs:matrix.org/$Ofj-TFIsEMbp0O9OhE8xuZSNi-nhRLtZTOgs6JRLNrs?via=matrix.org&via=gitter.im&via=mozilla.org
In lesson 2.6, users are asked to remove the second, forth and fifth
lines with `dd` command, then they are asked to undo twice to make the
text go back to original state. But after that, the mark ✗ appears
again, which confuses the user because they think they do something
wrong. This is a limitation with the current implementation, which is
based on line number only.
Solution:
Reimplement interactive marks as extmarks in Lua. This also make the
feature less fragile, as users can remove, add some arbitrary lines
without breaking the interactive marks.
Co-authored-by: Justin M. Keyes <justinkz@gmail.com>
bump
* tree-sitter to v0.25.6
* tree-sitter-c to v0.24.1
* tree-sitter-lua to v0.4.0
* tree-sitter-vim to v0.7.0 (and update queries)
* tree-sitter-vimdoc to v4.0.0
* tree-sitter-query to v0.6.2
* tree-sitter-markdown to v0.5.0
Problem: Since 48e2a736, prompt messages are handled by an actual
active cmdline, resulting in `State` no longer being equal
to `MODE_CONFIRM` which is used in some places. E.g. to
specify the current `mode()` or to re-emit a confirm message.
Solution: Replace `MODE_CONFIRM` with a new `MODE_CMDLINE` sub-mode when
`ccline.one_key/mouse_used` is set. Use it to avoid clearing
mouse_used prompt messages, and to re-emit one_key messages
(when ext_messages is inactive, for which this is unnecessary).
(cherry picked from commit e876a739ee)
Problem: The swapfile attention message is not repeated after clearing
the screen.
After clearing the screen `msg_scrolled` is reset without
clearing other related variables, causing an assert.
Solution: Make the attention message part of the confirm prompt.
Call `msg_reset_scroll()`.
(cherry picked from commit d86d4bacc1)
fix(health): floating window closes when opening TOC (gO) #34794
Problem: Health check floating window gets closed when pressing 'gO' to show TOC because LSP floating preview system auto-closes on BufEnter events triggered by :lopen.
Solution: Temporarily disable BufEnter event for the current window during TOC operations and adjust window layout to prevent overlap.
(cherry picked from commit 28b7c2df52)
Co-authored-by: glepnir <glephunter@gmail.com>
Problem: When 'wildmode' is set to include "noselect", the popup menu (pum)
incorrectly retained its scroll position when reopened. This
meant that after scrolling down through the menu with `<C-n>`,
reopening the menu (e.g., by retyping the command and
triggering completion again) would show the menu starting from
the previously scrolled position, rather than from the top.
This could confuse users, as the first visible item would not
be the first actual match in the list.
Solution: Ensure that the popup menu resets its scroll position to the
top when reopened (Girish Palya).
closes: vim/vim#176730cd7f3536b
Co-authored-by: Girish Palya <girishji@gmail.com>
Problem: tests: two edit tests change v:testing from 1 to 0.
Solution: Don't change v:testing in these two tests, since it's already
set to 1 in runtest.vim (zeertzjq).
closes: vim/vim#1766096076bf41e
(cherry picked from commit 11e967d5af)
Add a non-static variable for this, otherwise it'll be really hacky.
This avoid having to rewrite many incsearch tests in Lua.
(cherry picked from commit c925e7b8ba)
I was initially trying to port several cmdline tests from Vim involving
test_override('char_avail') without having to rewrite entire tests in
Lua, but haven't figured out a good way achieve that yet. Nevertheless
emulating test_override('starting') is easier.
(cherry picked from commit 715c28d67f)
731e616a79 made it so passing `{env = nil, clear_env = true }` would
pass `{env = {}}` to `vim.uv.spawn`.
However this is not what `clear_env` is (arguably) supposed to do.
If `env=nil` then that implies the uses wants `vim.uv.spawn()` to use
the default environment. Adding `clear_env = true` simply prevents
`NVIM` (the base environment) from being added.
Fixes#34730
(cherry picked from commit 4eebc46930)
Problem: Currently terminal highlight attribute buffers are statically allocated
be the size of `TERM_ATTRS_MAX`. This unique case isn't respected in
some places in the ui_compositor. Due to this, when a terminal window
has lines longer them `TERM_ATTRS_MAX`, the compositor will go past the
end of the buffer causing a crash due to out of bounds access.
Solution: Add check to ensure we don't query terminal highlight attrs
past `TERM_ATTRS_MAX` in `win_line()`.
Fixes#30374
(cherry picked from commit d6d1bfd20d)
Problem: tests: need a test for the new-style tutor.tutor, patch
9.1.1384 broke the expected positions for the signs
Solution: Update all number keys in tutor.tutor.json to match the
correct line numbers in tutor.tutor, replace tabs by spaces,
add a screen-dump test to verify it does not regress
(Pham Bình An)
closes: vim/vim#17416a541f1de2b
(cherry picked from commit f1f106be3d)
Problem: Topline is preemptively updated by line() in WinResized
autocmd with 'splitkeep' != "cursor".
Solution: Set `skip_update_topline` when 'splitkeep' != "cursor".
(Luuk van Baal)
fe803c8c04
(cherry picked from commit 0b91e9f83b)
Problem:
`vim.version.range('>=0.10'):has('0.12.0-dev')` returns false, which is
wrong per semver.
Solution:
`vim.VersionRange:has()` shouldn't have special handling for prereleases
(Why would we need it when `__eq`, `__lt`, `__le` already handle
prereleases?).
Closes#33316
Problem:
In setup_env, some needed logic is bypassed when clear_env=true.
Solution:
Drop the early return in setup_env().
Co-authored-by: BirdeeHub <birdee@localhost>
(cherry picked from commit 731e616a79)
Problem:
In LSP configs, the function form of `cmd()` cannot easily get the
resolved root dir (workspace). One of the main use-cases of a dynamic
`cmd()` is to be able to start a new server whose binary may be located
*in the workspace* ([example](https://github.com/neovim/nvim-lspconfig/pull/3912)).
Compare `reuse_client()`, which also receives the resolved config.
Solution:
Pass the resolved config to `cmd()`.
(cherry picked from commit 32f30c4874)
Co-authored-by: Julian Visser <12615757+justmejulian@users.noreply.github.com>
Problem: When closing a floating window, the next window to be entered
may be unfocusable or hidden.
Solution: Don't enter prevwin when it is unfocusable or hidden. Enter
firstwin instead (like for when prevwin is no longer valid).
(cherry picked from commit 0d658660c2)
