This will check if the string after the variable in a @param is either
"number", "string", "table", "boolean" and "function" and if so add a
parenthesis around it. This will help separate the variable type with
the following text. Had all our functions been annotated with emmylua
then a more robust solution might have been preferable (such as always
assuming the third string is parameter type without making any checks).
I believe however this is a clear improvement over the current situation
and will suffice for now.
Adds the API function `nvim_cmd` which allows executing an Ex-command through a Dictionary which can have the same values as the return value of `nvim_parse_cmd()`. This makes it much easier to do things like passing arguments with a space to commands that otherwise may not allow it, or to make commands interpret certain characters literally when they otherwise would not.
vim-patch:8.2.4903: cannot get the current cmdline completion type and position
Problem: Cannot get the current cmdline completion type and position.
Solution: Add getcmdcompltype() and getcmdscreenpos(). (Shougo Matsushita,
closesvim/vim#10344)
79d599b877
vim-patch:8.2.4910: imperfect coding
Problem: Imperfect coding.
Solution: Make code nicer.
9ff7d717aa
LSP servers should be daemonized (detached) so that they run in a
separate process group from Neovim's. Among other things, this ensures
the process does not inherit Neovim's TTY (#18475).
Make this configurable so that clients can explicitly opt-out of
detaching from Nvim.
Problem: Some users do not want a line comment always inserted.
Solution: Add the '/' flag to 'formatoptions' to not repeat the comment
leader after a statement when using "o".
2bf875f881
It seems range and count can be used together in commands. This PR fixes
the behavior of `nvim_parse_cmd` for those cases by removing the mutual
exclusivity of "range" and "count". It also removes range line number
validation for `nvim_parse_cmd` as it's not its job to validate the
command.
Problem: "P" in Visual mode still changes some registers.
Solution: Make "P" in Visual mode not change any register. (Shougo
Matsushita, closesvim/vim#10349)
509142ab7a
Adds filter and id options to filter the client to use for rename.
Similar to the recently added `format` function.
rename will use all matching clients one after another and can handle a
mix of prepareRename/rename support. Also ensures the right
`offset_encoding` is used for the `make_position_params` calls
Changes the `range` value in `nvim_parse_cmd` into an array to describe
range information more concisely. Also makes `range` and `count` be
mutually exclusive by making count `-1` when command takes a range
instead of a count. Additionally corrects the behavior of `count` for
built-in commands by making the default count `0`.
Adds range, count and reg to the return values of nvim_parse_cmd. Also makes
line1 and line2 be -1 if the command does not take a range. Also moves
nvim_parse_cmd to vimscript.c because it fits better there.
This is primarily intended to act as documentation for the developer so
they know exactly when and what to remove. This will help prevent the
situation of deprecated code lingering for far too long as developers
don't have to worry if a function is safe to remove.
PROBLEM
------------------------------------------------------------------------
$NVIM_LISTEN_ADDRESS has conflicting purposes as both a parameter ("the
current process should listen on this address") and a descriptor ("the
current process is a child of this address").
This contradiction means the presence of NVIM_LISTEN_ADDRESS is
ambiguous, so child Nvim always tries to listen on its _parent's_
socket. This is the cause of lots of "Failed to start server" spam in
our test/CI logs:
WARN 2022-04-30… server_start:154: Failed to start server: address already in use: \\.\pipe\nvim-4480-0
WARN 2022-04-30… server_start:154: Failed to start server: address already in use: \\.\pipe\nvim-2168-0
SOLUTION
------------------------------------------------------------------------
1. Set $NVIM to the parent v:servername, *only* in child processes.
- Now the correct way to detect a "parent" Nvim is to check for $NVIM.
2. Do NOT set $NVIM_LISTEN_ADDRESS in child processes.
3. On startup if $NVIM_LISTEN_ADDRESS exists, unset it immediately after
server init.
4. Open a channel to parent automatically, expose it as v:parent.
Fixes#3118Fixes#6764Fixes#9336
Ref https://github.com/neovim/neovim/pull/8247#issuecomment-380275696
Ref #8696
`:syntax enable` is no longer necessary (and may even be harmful). Do not recommend it in `usr_05.txt` and `usr_06.txt`, and mention the new default in `syntax.txt`.
Deprecates the existing `vim.lsp.buf.formatting` function.
With this, `vim.lsp.buf.format` will replace all three:
- vim.lsp.buf.formatting
- vim.lsp.buf.formatting_sync
- vim.lsp.buf.formatting_seq_sync
* feat(lsp)!: remove capabilities sanitization
Users must now access client.server_capabilities which matches the same
structure as the protocol.
https://microsoft.github.io/language-server-protocol/specification
client.resolved_capabilities is no longer used to gate capabilities, and
will be removed in a future release.
BREAKING CHANGE
Co-authored-by: Mathias Fussenegger <f.mathias@zignar.net>
Implement two new options to vim.lsp.buf.code_action():
- filter (function): predicate taking an Action as input, and returning
a boolean.
- apply (boolean): when set to true, and there is just one remaining
action (after filtering), the action is applied without user query.
These options can, for example, be used to filter out, and automatically
apply, the action indicated by the server to be preferred:
vim.lsp.buf.code_action({
filter = function(action)
return action.isPreferred
end,
apply = true,
})
Fix#17514.
Problem: Using \{xxx} for encoding a modifier is not nice.
Solution: Use \<*xxx> instead, since it's the same as \<xxx> but producing a
different code.
fccd93f091
Use this notation in langmap_spec.
Problem: GUI tests fail because the test doesn't use a modifier.
Solution: Add "\{xxx}" to be able to encode a modifier.
ebe9d34aa0
Change macros to enums to use them in unit tests.
This marks the following Vim patches as ported:
vim-patch:8.1.2333: with modifyOtherKeys CTRL-^ doesn't work
Problem: With modifyOtherKeys CTRL-^ doesn't work.
Solution: Handle the exception.
828ffd5963
vim-patch:8.1.2350: other text for CTRL-V in Insert mode with modifyOtherKeys
Problem: Other text for CTRL-V in Insert mode with modifyOtherKeys.
Solution: Convert the Escape sequence back to key as if modifyOtherKeys is
not set, and use CTRL-SHIFT-V to get the Escape sequence itself.
(closesvim/vim#5254)
fc4ea2a72d
vim-patch:8.2.2084: CTRL-V U doesn't work to enter a Unicode character
Problem: CTRL-V U doesn't work to enter a Unicode character when
modifyOtherKeys is effective. (Ken Takata)
Solution: Add a flag to get_literal() for the shift key. (closesvim/vim#7413)
0684e36a7e
Omit getcmdkeycmd() change as it depends on Vim patch 8.2.2062, which
may introduce a potential breakage.
Problem:
winpty is only needed for Windows 8.1. Removing it reduces our build and code
complexity.
Solution:
- Remove winpty.
- Require Windows 10.
closes#18252
Problem: Using matchfuzzy() on a long list can take a while.
Solution: Add a limit to the number of matches. (Yasuhiro Matsumoto,
closesvim/vim#10189)
9029a6e993
