Problem: possible crash when calculating topline in diff.c
(youngmith)
Solution: Check for pointer being Null before accessing it
fixes: vim/vim#18437d32b3bb7eb
The POC is likely not applicable to Nvim due to #32160.
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Vim tests are slow and flaky at the same time due to reliance
on timeouts which are unreliable.
Solution: improve Vim test performance and reduce flakiness
(Yee Cheng Chin)
A lot of Vim tests currently rely on waiting a specific amount of time
before asserting a condition. This is bad because 1) it is slow, as the
timeout is hardcoded, 2) it's unreliable as a resource-starved runner
may overshoot the timeout. Also, there are a lot of builtin sleep
commands in commonly used utilities like VerifyScreenDump and WaitFor()
which leads to a lot of unnecessary idle time.
Fix these issues by doing the following:
1. Make utilities like VerifyScreenDump and WaitFor use the lowest wait
time possible (1 ms). This essentially turns it into a spin wait. On
fast machines, these will finish very quickly. For existing tests
that had an implicit reliance on the old timeouts (e.g.
VerifyScreenDump had a 50ms wait before), fix the tests to wait that
specific amount explicitly.
2. Fix tests that sleep or wait for long amounts of time to instead
explicitly use a callback mechanism to be notified when a child
terminal job has finished. This allows the test to only take as much
time as possible instead of having to hard code an unreliable
timeout.
With these fixes, tests should 1) completely quickly on fast machines,
and 2) on slow machines they will still run to completion albeit slowly.
Note that previoulsy both were not true. The hardcoded timeouts meant
that on fast machines the tests were mostly idling wasting time, whereas
on slow machines, the timeouts often were not generous enough to allow
them to run to completion.
closes: vim/vim#16615e70587dbdb
Part of shared.vim and test_crash.vim changes only.
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: tests: "Untitled" file not removed when running Test_crash1_3 alone
with TEST_FILTER (after v9.1.0695)
Solution: Use a TearDown function instead of another test.
(zeertzjq)
closes: vim/vim#15578closes: vim/vim#15577d56c451e1c
Problem: tests: test_crash leaves Untitled file around
Solution: cleanup at the end of the test_crash.vim test file
cd83173def
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: buffer-overflow in do_search() with 'rightleft'
(SuyueGuo)
Solution: after reversing the text (which allocates a new buffer),
re-calculate the text length
Github Advisory:
https://github.com/vim/vim/security/advisories/GHSA-v2x2-cjcg-f9jmcacb6693c1
Add missing change from patch 8.1.1270.
Omit `call delete('Untitled')`: moved again in patch 9.1.0695.
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: completion: "longest" doesn't work for manual completion when
'autocomplete' is on (after 9.1.1800).
Solution: Only reset compl_get_longest when enabling autocompletion
(zeertzjq).
closes: vim/vim#18430b3966d6a8e
Problem: completion: autocompletion can be improved
Solution: Add support for "longest" and "preinsert" in 'autocomplete';
add preinserted() (Girish Palya)
* Add support for "longest" in 'completeopt' when 'autocomplete'
is enabled. (Note: the cursor position does not change automatically
when 'autocomplete' is enabled.)
* Add support for "preinsert" when 'autocomplete' is enabled. Ensure
"preinsert" works the same with and without 'autocomplete'
* introduce the preinserted() Vim script function, useful for defining
custom key mappings.
fixes: vim/vim#18314closes: vim/vim#18387c05335082a
Co-authored-by: Girish Palya <girishji@gmail.com>
Problem: Option insecure flags not copied when splitting window.
Solution: Move window-local insecure flags to winopt_T and copy them
properly (zeertzjq).
closes: vim/vim#18434b3740f4b00
Problem: :set doesn't clear local insecure flag like :setlocal does.
Solution: Also clear the local insecure flag when using :set (zeertzjq).
This applies to local options like 'wrap', 'foldtext' and 'foldexpr',
whose global flags are actually never used. For global-local options
like 'statusline' the behavior is already correct, so add some tests.
related: vim/vim#18434fec5586a45
Problem: 'nowrap' in a modeline may hide malicious code.
Solution: Forcibly use '>' as 'listchars' "extends" if 'nowrap' was set
from a modeline (zeertzjq).
Manual `:setlocal nowrap` disables this behavior. There is a separate
problem with `:set nowrap` that also applies to some other options.
related: vim/vim#18214
related: vim/vim#18399closes: vim/vim#184259d5208a931
Cherry-pick some test_modeline.vim changes from patches 9.0.{0363,0626}.
Problem: completion: Enter does not insert match with "noinsert".
(Sergey Vlasov)
Solution: Check for compl_shown_match instead of compl_selected_item
(zeertzjq).
fixes: vim/vim#18386
related: vim/vim#1653closes: vim/vim#18395ef818ae444
Problem: filetype: not all Sway config files are recognized
Solution: Detect files within */sway/config.d/* as swayconfig filetype
(Felix Pehla).
Sways default config automatically includes files placed in
@sysconfdir@/sway/config.d/* (see config.in), so it makes sense to use
the sway syntax for those.
related: vim/vim#1829324f0dbba8c
Co-authored-by: Felix Pehla <29adc1fd92@gmail.com>
Problem: completion: 'autocomplete' cannot be enabled per buffer
(Tomasz N)
Solution: Make 'autocomplete' global or local to buffer (Girish Palya)
fixes: vim/vim#18320closes: vim/vim#183330208b3e80a
Co-authored-by: Girish Palya <girishji@gmail.com>
Problem: "adding" expansion doesn't work with cfc=keyword.
Solution: Remove incorrect assignment to compl_cont_status. Don't use
fuzzy collection in "adding" status (zeertzjq).
related: neovim/neovim#35842closes: vim/vim#18351e19a882ffc
Problem: Mouse click to open fold doesn't work with utf-8 "foldclose"
chars (Balki)
Solution: Use ScreenLinesUC[off] if it is set (zeertzjq).
fixes: vim/vim#18344closes: vim/vim#183498b5fe7d090
Problem: cannot calculate sha256() of a Blob
Solution: Change sha256() to accept a Blob or String argument
(thinca).
closes: vim/vim#183364150283b83
Co-authored-by: thinca <thinca@gmail.com>
Problem: complete: some redraw issues with 'autocomplete'
Solution: Fix the issues (Girish Palya)
This commit contains the following changes:
* Fix that wildtrigger() might leave opened popupmenu around vim/vim#18298
* Remove blinking message on the command line when a menu item from a loaded
buffer is selected during 'autocomplete'
* Add a test for PR vim/vim#18265 to demonstrate why the PR is required for correct
'autocomplete' behavior
fixes: vim/vim#18298closes: vim/vim#18328ee9a2f0512
Co-authored-by: Girish Palya <girishji@gmail.com>
Problem: When the popup menu (PUM) occupies more than half the screen
height, it flickers whenever a character is typed or erased.
This happens because the PUM is cleared and the screen is
redrawn before a new PUM is rendered. The extra redraw between
menu updates causes visible flicker.
Solution: A complete, non-hacky fix would require removing the
CmdlineChanged event from the loop and letting autocompletion
manage the process end-to-end. This is because screen redraws
after any cmdline change are necessary for other features to
work.
This change modifies wildtrigger() so that the next typed
character defers the screen update instead of redrawing
immediately. This removes the intermediate redraw, eliminating
flicker and making cmdline autocompletion feel smooth
(Girish Palya).
Trade-offs:
This behavior change in wildtrigger() is tailored specifically for
:h cmdline-autocompletion. wildtrigger() now has no general-purpose use
outside this scenario.
closes: vim/vim#17932da9c966893
Use pum_check_clear() instead of update_screen().
Cherry-pick Test_wildtrigger_update_screen() change from patch 9.1.1682.
Co-authored-by: Girish Palya <girishji@gmail.com>
Problem: Crash in BufLeave/WinLeave/TabLeave when closing window after
BufUnload closes all other windows in the tab page.
Solution: Avoid duplicate BufLeave/WinLeave events. Trigger TabLeave
before removing the buffer (zeertzjq).
related: vim/vim#14166
related: neovim/neovim#33603closes: vim/vim#183300c70820015
Problem: 'ruler' is set in defaults.vim, but not enabled by default in
non-compatible mode.
Solution: set the ruler option in non-compatible mode, remove it from
defaults.vim, update tests
closes: vim/vim#18260ba36510920
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: defaults: 'showcmd' is not enabled in non-compatible mode on
Unix
Solution: Always enable 'showcmd' in non-compatible mode, drop it from
defaults.vim.
'showcmd' was already always enabled in Vim compatible mode except for
UNIX environments. So let's just enable it always, there is no good
reason why UNIX platforms should be handled differently than other
platforms, especially since `defaults.vim` did enable this option
anyhow.
closes: vim/vim#177393f9d2378bd
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: filetype: kitty config files are not recognized
Solution: Detect */kitty/*.conf as kitty filetype, include a syntax
script (Shawon).
closes: vim/vim#18280a946ccf5ff
Co-authored-by: Shawon <mdmoinulhossainshawon@gmail.com>
Problem: completion: selected item not cleared on backspace when
'autocomplete' is set
Solution: Clear the selected item (Girish Palya)
closes: vim/vim#182605c9b71d63c
Co-authored-by: Girish Palya <girishji@gmail.com>
Problem: Diff mode crashes when adding text property in autocommand
(after 9.1.1557).
Solution: Only restore ML_EMPTY memline flag, ignore the others
(zeertzjq).
fixes: vim/vim#18288closes: vim/vim#1829146e22fd2f7
Problem: A 'rulerformat' not part of the statusline is not emitted through
msg_ruler events.
Solution: Build the message chunks to emit as a msg_ruler event.
Problem: defaults: 'diffopt' option value can be improved
Solution: Update diffopt defaults to include "indent-heuristic" and
"inline:char" (Yee Cheng Chin)
The default diff options have not been updated much despite new
functionality having been added to Vim.
- indent-heurstic: This has been enabled by default in Git since
33de716387 in 2017. Given that Vim uses xdiff from Git, it makes sense
to track the default configuration from Git.
- inline:char: This turns on character-wise inline highlighting which is
generally much better than the default inline:simple. It has been
implemented since vim/vim#16881 and we have not seen reports of any issues
with it, and it has received good feedbacks.
closes: vim/vim#18255976b365305
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: Using common name in tests leads to flaky tests.
Solution: Rename files and directories to be more specific.
3b0d70f4ff
This includes only test_help.vim changes.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: tests: No test when deleting text after autocompletion with preinsert
did complete an entry
Solution: Verify, that after deletion autocompletion does not reinsert
the deleted text. Note: the actual issue was fixed with v9.1.1750.
(Girish Palya)
Pre v9.1.1750 behaviour:
When autocomplete is enabled with *preinsert*, deleting text after selecting a
longer match could cause unintended reinsertion, e.g.:
- Matches available: "foo" and "foobar".
- User selects "foobar" with Ctrl-N
- User deletes characters back to "foo".
- Autocomplete then incorrectly re-inserts "bar", preventing deletion past "foo".
v9.1.1750 removes the unwanted reinsertion so text can be deleted correctly.
closes: vim/vim#18259fe0061c609
Co-authored-by: Girish Palya <girishji@gmail.com>
Problem: completion: redo (.) broken with preinsert and autocompletion
Solution: Make redo (.) work with preinsert and autocompletion
(Girish Palya)
closes: vim/vim#18253306a138172
Co-authored-by: Girish Palya <girishji@gmail.com>
Problem: complete: preinsert does not work well with preinsert
Solution: Make "preinsert" completeopt value work with autocompletion
(Girish Palya)
This change extends Insert mode autocompletion so that 'preinsert' also
works when 'autocomplete' is enabled.
Try: `:set ac cot=preinsert`
See `:help 'cot'` for more details.
closes: vim/vim#18213fa6fd41a94
Co-authored-by: Girish Palya <girishji@gmail.com>
Problem: cmdline-autocompletion breaks history navigation (ddad431)
Solution: Support history navigation in cmdline autocompletion (Girish
Palya)
Up/Down arrows support history navigation when using wildtrigger()
fixes: vim/vim#18207closes: vim/vim#18219708ab7f5fb
Co-authored-by: Girish Palya <girishji@gmail.com>
Problem: Matches may be listed twice with wildmode=longest,list when
"longest" doesn't change command line (after 9.1.1737).
Solution: Set did_wild_list when trying "list" after "longest"
(zeertzjq).
closes: vim/vim#18227a28a2eb9d9
Problem: Patch v9.1.1714 introduce a regression for wildmenu (zeertzjq)
Solution: Restore behavior of "longest" in 'wildmode' (Girish Palya)
- Fixed a regression caused by PR vim/vim#18125 selecting wrong item
- Fixed another regression where the first pasted text did not appear on
the command-line after starting Vim.
closes: vim/vim#182128fec92d631
Co-authored-by: Girish Palya <girishji@gmail.com>
Problem: completion: long line shown twice
(Maxim Kim)
Solution: Fix the issue, disable an incorrect test.
(Girish Palya)
fixes: vim/vim#18035closes: vim/vim#1808857379302aa
Omit removal of blank line in Test_noselect_expand_env_var() as it's
added again in patch 9.1.1682.
Cherry-pick two blank lines in Test_long_line_noselect() from patch
9.1.1682.
Co-authored-by: Girish Palya <girishji@gmail.com>
