Problem: filetype: mbsyncrc files are not recognized
Solution: detect isyncrc and "*.mbsyncrc" files as mbsync filetype,
include filetype and syntax plugin (Pierrick Guillaume)
mbsync is a command line application which synchronizes mailboxes;
currently Maildir and IMAP4 mailboxes are supported.
New messages, message deletions and flag changes can be propagated both ways;
the operation set can be selected in a fine-grained manner.
References:
mbsync syntax overview: mbsync manual (isync v1.4.4)
https://isync.sourceforge.io/mbsync.html
Upstream support for the mbsync filetype.
Original plugin: https://github.com/Fymyte/mbsync.vimcloses: vim/vim#17103836b87d699
Co-authored-by: Pierrick Guillaume <pguillaume@fymyte.com>
This has been bothering me quite for some time and I never knew why it
happened. Just today it occurred to me this might have been because of
the last-position-jump.
So I figured, let's fix it for everybody, not just me.
closes: vim/vim#170926f6c0dba9f
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem:
`vim.version.range('>=0.10'):has('0.12.0-dev')` returns false, which is
wrong per semver.
Solution:
`vim.VersionRange:has()` shouldn't have special handling for prereleases
(Why would we need it when `__eq`, `__lt`, `__le` already handle
prereleases?).
Closes#33316
Problem: No type information for `vim.uv`.
Solution: Vendor https://github.com/LuaCATS/luv (which is what
luals bundles). This will allow other tooling to work out-of-the-box and
make these files available to users and plugins without the need for
`lazydev.nvim` etc.
Problem:
- Help tags provide a good way to navigate the Vim documentation, but
many help documents don't use them effectively. I think one of the
reasons is that help writers have to look up help tags manually with
`:help` command, which is not very convenient.
- 'iskeyword' is only set for help buffers opened by `:help` command.
That means if I'm editing a help file, I cannot jump to tag in same
file using `Ctrl-]` unless I manually set it, which is annoying.
Solution:
- Add omni completion for Vim help tags.
- Set 'iskeyword' for `ft-help`
closes: vim/vim#170730b540c6f38
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem:
As checkhealth grows, it is increasingly hard to quickly glance through
the information.
Solution:
Show a summary of ok, warn, and error outputs per section.
Problem: Using wrong window in ll_resize_stack()
(after v9.1.1287)
Solution: Use "wp" instead of "curwin", even though they are always the
same value. Fix typos in documentation (zeertzjq).
closes: vim/vim#17080b71f1309a2
Problem: inline word diff treats multibyte chars as word char
(after 9.1.1243)
Solution: treat all non-alphanumeric characters as non-word characters
(Yee Cheng Chin)
Previously inline word diff simply used Vim's definition of keyword to
determine what is a word, which leads to multi-byte character classes
such as emojis and CJK (Chinese/Japanese/Korean) characters all
classifying as word characters, leading to entire sentences being
grouped as a single word which does not provide meaningful information
in a diff highlight.
Fix this by treating all non-alphanumeric characters (with class number
above 2) as non-word characters, as there is usually no benefit in using
word diff on them. These include CJK characters, emojis, and also
subscript/superscript numbers. Meanwhile, multi-byte characters like
Cyrillic and Greek letters will still continue to considered as words.
Note that this is slightly inconsistent with how words are defined
elsewhere, as Vim usually considers any character with class >=2 to be
a "word".
related: vim/vim#16881 (diff inline highlight)
closes: vim/vim#170509aa120f7ad
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem:
First rtp directory is unpredictable and not in line with XDG
base spec.
Solution:
Use stdpath('data')/spell as directory if 'spellfile' is not set.
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Co-authored-by: Justin M. Keyes <justinkz@gmail.com>
Problem: Currently vim.hl.range only allows one timed highlight.
Creating another one, removes the old one.
Solution: vim.hl.range now returns a timer and a function. The timer
keeps track of how much time is left in the highlight and the function
allows you to clear it, letting the user decide what to do with old
highlights.
These occurrences also accept string, which is used like in getline.
Also make the lnum field of vim.fn.sign_placelist.list.item optional, as it can
be omitted like vim.fn.sign_place.dict's.
Problem:
Upon receiving a deadly signal, Nvim doesn't write buffers even if
the option 'autowriteall' is set.
Solution:
Write to all writable buffers upon SIGHUP or SIGQUIT (but not
SIGTERM), if the option 'autowriteall' is set.
Co-authored-by: Justin M. Keyes <justinkz@gmail.com>
Problem:
Some language servers do not work properly without a workspace folder.
Solution:
Add `workspace_required`, which skips starting the lsp client if no
workspace folder is found.
Co-authored-by: Justin M. Keyes <justinkz@gmail.com>
Problem: cannot set the maximum popup menu width
(Lucas Mior)
Solution: add the new global option value 'pummaxwidth'
(glepnir)
fixes: vim/vim#10901closes: vim/vim#1694388d75934c3
Co-authored-by: glepnir <glephunter@gmail.com>
Problem: regexp: max \U and \%U value is limited by INT_MAX but gives a
confusing error message (related: v8.1.0985).
Solution: give a better error message when the value reaches INT_MAX
When searching Vim allows to get up to 8 hex characters using the /\V
and /\%V regex atoms. However, when using "/\UFFFFFFFF" the code point is
already above what an integer variable can hold, which is 2,147,483,647.
Since patch v8.1.0985, Vim already limited the max codepoint to INT_MAX
(otherwise it caused a crash in the nfa regex engine), but instead of
error'ing out it silently fell back to parse the number as a backslash
value and not as a codepoint value and as such this "/[\UFFFFFFFF]" will
happily find a "\" or an literal "F". And this "/[\d127-\UFFFFFFFF]"
will error out as "reverse range in character class).
Interestingly, the max Unicode codepoint value is U+10FFFF which still
fits into an ordinary integer value, which means, that we don't even
need to parse 8 hex characters, but 6 should have been enough.
However, let's not limit Vim to search for only max 6 hex characters
(which would be a backward incompatible change), but instead allow all 8
characters and only if the codepoint reaches INT_MAX, give a more
precise error message (about what the max unicode codepoint value is).
This allows to search for "[\U7FFFFFFE]" (will likely return "E486
Pattern not found") and "[/\U7FFFFFF]" now errors "E1517: Value too
large, max Unicode codepoint is U+10FFFF".
While this change is straight forward on architectures where long is 8
bytes, this is not so simple on Windows or 32bit architectures where long
is 4 bytes (and therefore the test fails there). To account for that,
let's make use of the vimlong_T number type and make a few corresponding
changes in the regex engine code and cast the value to the expected data
type. This however may not work correctly on systems that doesn't have
the long long datatype (e.g. OpenVMS) and probably the test will fail
there.
fixes: vim/vim#16949closes: vim/vim#16994f2b16986a1
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Typos in code and docs related to 'diffopt' "inline:".
(after v9.1.1243)
Solution: Fix typos and slightly improve the docs.
(zeertzjq)
closes: vim/vim#169975a307c361c
Problem: Diff mode's inline highlighting is lackluster. It only
performs a line-by-line comparison, and calculates a single
shortest range within a line that could encompass all the
changes. In lines with multiple changes, or those that span
multiple lines, this approach tends to end up highlighting
much more than necessary.
Solution: Implement new inline highlighting modes by doing per-character
or per-word diff within the diff block, and highlight only the
relevant parts, add "inline:simple" to the defaults (which is
the old behaviour)
This change introduces a new diffopt option "inline:<type>". Setting to
"none" will disable all inline highlighting, "simple" (the default) will
use the old behavior, "char" / "word" will perform a character/word-wise
diff of the texts within each diff block and only highlight the
differences.
The new char/word inline diff only use the internal xdiff, and will
respect diff options such as algorithm choice, icase, and misc iwhite
options. indent-heuristics is always on to perform better sliding.
For character highlight, a post-process of the diff results is first
applied before we show the highlight. This is because a naive diff will
create a result with a lot of small diff chunks and gaps, due to the
repetitive nature of individual characters. The post-process is a
heuristic-based refinement that attempts to merge adjacent diff blocks
if they are separated by a short gap (1-3 characters), and can be
further tuned in the future for better results. This process results in
more characters than necessary being highlighted but overall less visual
noise.
For word highlight, always use first buffer's iskeyword definition.
Otherwise if each buffer has different iskeyword settings we would not
be able to group words properly.
The char/word diffing is always per-diff block, not per line, meaning
that changes that span multiple lines will show up correctly.
Added/removed newlines are not shown by default, but if the user has
'list' set (with "eol" listchar defined), the eol character will be be
highlighted correctly for the specific newline characters.
Also, add a new "DiffTextAdd" highlight group linked to "DiffText" by
default. It allows color schemes to use different colors for texts that
have been added within a line versus modified.
This doesn't interact with linematch perfectly currently. The linematch
feature splits up diff blocks into multiple smaller blocks for better
visual matching, which makes inline highlight less useful especially for
multi-line change (e.g. a line is broken into two lines). This could be
addressed in the future.
As a side change, this also removes the bounds checking introduced to
diff_read() as they were added to mask existing logic bugs that were
properly fixed in vim/vim#16768.
closes: vim/vim#168819943d4790e
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Also, do not set g:is_kornshell when g:is_posix is set. BSD shells are
POSIX but many are derived from the ash shell.
closes: vim/vim#1693951a06ecee0
Co-authored-by: Mohamed Akram <mohd.akram@outlook.com>
Problem: Strange error with type for matchfuzzy() "camelcase".
Solution: Show the error "Invalid value for argument camelcase" instead
of "Invalid argument: camelcase" (zeertzjq).
Note that using tv_get_string() will lead to confusion, as when the
value cannot be converted to a string tv_get_string() will also give an
error about that, but "camelcase" takes a boolean, not a string. Also
don't use tv_get_string() for the "limit" argument above.
closes: vim/vim#16926c4815c157b
Problem: When searching for "Cur", CamelCase matches like "lCursor" score
higher than exact prefix matches like Cursor, which is
counter-intuitive (Maxim Kim).
Solution: Add a 'camelcase' option to matchfuzzy() that lets users disable
CamelCase bonuses when needed, making prefix matches rank higher.
(glepnir)
fixes: vim/vim#16504closes: vim/vim#1679728e40a7b55
Co-authored-by: glepnir <glephunter@gmail.com>
Problem: 'completefuzzycollect' does not handle dictionary correctly
Solution: check for ctrl_x_mode_dictionary (glepnir)
closes: vim/vim#16867587601671c
Cherry-pick a documentation fix from later.
Co-authored-by: glepnir <glephunter@gmail.com>
- Fix grammar
- Use "matches" instead of "items" ("completion candidates" is used in
some other places, but it's a bit verbose)
- "When set" is a bit vague, instead use "For specified modes"
closes: vim/vim#168711dc731a49f
Problem: No cmdline completion for the 'completefuzzycollect' option
(after v9.1.1178)
Solution: Add cmdline completion for the 'completefuzzycollect' option,
improve its description in optwin.vim (zeertzjq).
closes: vim/vim#1681353d59ecc1d
No code change is needed in Nvim as Nvim uses expand_set_str_generic()
by default.
