Problem: 'nowrap' in a modeline may hide malicious code.
Solution: Forcibly use '>' as 'listchars' "extends" if 'nowrap' was set
from a modeline (zeertzjq).
Manual `:setlocal nowrap` disables this behavior. There is a separate
problem with `:set nowrap` that also applies to some other options.
related: vim/vim#18214
related: vim/vim#18399closes: vim/vim#18425https://github.com/vim/vim/commit/9d5208a9313dd8b0d62c97af5485f1715af98a1c
Cherry-pick some test_modeline.vim changes from patches 9.0.{0363,0626}.
Problem: :update should write new file buffers, but previous fix
affected special buffer types (acwrite, nofile, etc.).
Solution: Add bt_nofilename() check to only write new files for
buffers representing real filesystem paths.
Problem: update command does not write new buffers that have
filenames but no corresponding file on disk, even when using ++p flag.
Solution: allow update to write when buffer has filename but file
doesn't exist.
Before functional/testnvim.lua was moved from functional/testutil.lua in
052498ed42, it was explicitly preloaded,
but now it is preloaded implicitly via functional/ui/screen.lua.
Also fix warnings about unused variables in other preload.lua files.
- Remove "state" directory after each test, so that a failure in one
test won't interfere with later tests.
- Still make sure the trust file is empty at the end of each test.
Problem: filetype: not all Sway config files are recognized
Solution: Detect files within */sway/config.d/* as swayconfig filetype
(Felix Pehla).
Sways default config automatically includes files placed in
@sysconfdir@/sway/config.d/* (see config.in), so it makes sense to use
the sway syntax for those.
related: vim/vim#18293https://github.com/vim/vim/commit/24f0dbba8c19be6969f392f891067ded4233bde7
Co-authored-by: Felix Pehla <29adc1fd92@gmail.com>
Use only a single clear() call in some test/functional/vimscript/ test
files whose test cases have very little side effect.
A downside of using a single clear() is that if a crash happens in one
test case, all following test cases in the same file will also fail, but
these functionalities and tests don't change very often.
Problem: complete: some redraw issues with 'autocomplete'
Solution: Fix the issues (Girish Palya)
This commit contains the following changes:
* Fix that wildtrigger() might leave opened popupmenu around vim/vim#18298
* Remove blinking message on the command line when a menu item from a loaded
buffer is selected during 'autocomplete'
* Add a test for PR vim/vim#18265 to demonstrate why the PR is required for correct
'autocomplete' behavior
fixes: vim/vim#18298closes: vim/vim#18328https://github.com/vim/vim/commit/ee9a2f0512e8b732e3c6a000974aa7e3f6028989
Co-authored-by: Girish Palya <girishji@gmail.com>
Problem: When the popup menu (PUM) occupies more than half the screen
height, it flickers whenever a character is typed or erased.
This happens because the PUM is cleared and the screen is
redrawn before a new PUM is rendered. The extra redraw between
menu updates causes visible flicker.
Solution: A complete, non-hacky fix would require removing the
CmdlineChanged event from the loop and letting autocompletion
manage the process end-to-end. This is because screen redraws
after any cmdline change are necessary for other features to
work.
This change modifies wildtrigger() so that the next typed
character defers the screen update instead of redrawing
immediately. This removes the intermediate redraw, eliminating
flicker and making cmdline autocompletion feel smooth
(Girish Palya).
Trade-offs:
This behavior change in wildtrigger() is tailored specifically for
:h cmdline-autocompletion. wildtrigger() now has no general-purpose use
outside this scenario.
closes: vim/vim#17932https://github.com/vim/vim/commit/da9c9668931e5c8ee4dc0e430898ad2d80f56862
Use pum_check_clear() instead of update_screen().
Cherry-pick Test_wildtrigger_update_screen() change from patch 9.1.1682.
Co-authored-by: Girish Palya <girishji@gmail.com>
Problem: defaults: 'showcmd' is not enabled in non-compatible mode on
Unix
Solution: Always enable 'showcmd' in non-compatible mode, drop it from
defaults.vim.
'showcmd' was already always enabled in Vim compatible mode except for
UNIX environments. So let's just enable it always, there is no good
reason why UNIX platforms should be handled differently than other
platforms, especially since `defaults.vim` did enable this option
anyhow.
closes: vim/vim#17739https://github.com/vim/vim/commit/3f9d2378bd70748fc59e02a402422269bd096492
Co-authored-by: Christian Brabandt <cb@256bit.org>
The vim._extui.messages module uses multiple timers that last 2 or 4
seconds. If these timers aren't finished when a test ends, there will
be a 2-second delay on exit with ASAN or TSAN.
Problem:
If there are 2 language servers with different trigger chars (`-` and
`>`), and a keymap inputs both simultaneously (`->`), then `>` doesn't
trigger. We get completion items from server1 only.
This happens because the `completion_timer` for the `-` trigger is still
pending.
Solution:
If the next character arrived enough quickly (< 25 ms), replace the
existing deferred autotrigger with a new one that matches this later
character.
Overriding vim.lsp.handlers['textDocument/formatting'] doesn't work here
because fake_lsp_server_setup() uses a table with __index to specify
client handlers, which takes priority over vim.lsp.handlers[], and as a
result the overridden handler is never called, and the test ends before
the vim.wait() even finishes.
Instead, set a global variable from the handler that is actually reached
(by vim.rpcrequest() from client handler), and avoid stopping the event
loop too early.
Problem:
`gx` does not work on tags in help buffers to open the documentation of that tag in the browser.
Solution:
Get the `optionlink`, `taglink` and `tag` TS nodes and set extmark "url" property.
`gx` then discovers the extmark "url" and opens it.
- Bump zig version to 0.15.1 and workaround zig fetch hang (ziglang/zig#24916)
- add mac os zig build (currently without luajit, linker failure)
- Add windows zig build, currently with very limited testing
This also fixes the following warning in tests with ASAN or TSAN:
-------- Running tests from test/functional/plugin/lsp/inline_completion_spec.lua
RUN T4604 vim.lsp.inline_completion enable() requests or abort when entered/left insert mode: 225.00 ms OK
RUN T4605 vim.lsp.inline_completion get() applies the current candidate: 212.00 ms OK
nvim took 2013 milliseconds to exit after last test
This indicates a likely problem with the test even if it passed!
RUN T4606 vim.lsp.inline_completion get() accepts on_accept callback: 212.00 ms OK
RUN T4607 vim.lsp.inline_completion select() selects the next candidate: 220.00 ms OK
-------- 4 tests from test/functional/plugin/lsp/inline_completion_spec.lua (3437.00 ms total)
-------- Running tests from test/functional/plugin/lsp/linked_editing_range_spec.lua
nvim took 2011 milliseconds to exit after last test
This indicates a likely problem with the test even if it passed!
This fixes the following warning in tests with ASAN or TSAN:
-------- Running tests from test/functional/lua/watch_spec.lua
RUN T4253 vim._watch watch() ignores nonexistent paths: 29.00 ms OK
nvim took 2006 milliseconds to exit after last test
This indicates a likely problem with the test even if it passed!
zeertzjq