Problem:
- Editing a 'readonly' file forces a 3-second delay.
- nvim_get_mode waits 3 secs with 'showmode' enabled or when there are error messages.
Solution:
Remove the delay for "ui2", by using `msg_delay`.
Problem: Terminal buffers are not refreshed when processing keys that
trigger partial mappings.
Solution: Process due terminal refreshes before redrawing.
Problem:
Currently, : mark is set in start of prompt-line. But more relevant
location is where the user text starts.
Solution:
Store and update column info on ': just like the line info
When width1 and width2 are negative the assertion may fail. It seems
that adding a negative value to w_curswant won't cause any problems, so
just change the assertion.
Problem:
Tests that trigger `os_delay` messages may take 1-3 seconds, wasting
build/CI time, since this serves no purpose in tests.
Solution:
- Introduce `msg_delay` for cases where `os_delay` is being used as
a "UI feature".
- Skip `msg_delay` in tests.
Technically the current behavior does match documentation. However, the
keys following <Cmd>/K_LUA aren't normally received by vim.on_key()
callbacks either, so it does makes sense to discard them along with the
preceding key.
One may also argue that vim.on_key() callbacks should instead receive
the following keys together with the <Cmd>/K_LUA, but doing that may
cause some performance problems, and even in that case the keys should
still be discarded together.
Problem: In visual mode, g<End> does not move to the last non-blank
character when the end of a line is on the same line as the
cursor (after v9.0.1753)
Solution: Move the cursor back by one position if it lands after the
line (varsidry)
fixes: vim/vim#18657closes: vim/vim#18658adc85151f3
Problem: v:register is wrong in v_: command (after 9.1.1858).
Solution: Don't reset v:register for OP_COLON (zeertzjq)
related: https://github.com/vim/vim/pull/18583#issuecomment-3418030021closes: vim/vim#185970124320c97
While at it, also fix using stale set_prevcount value. That only matters
when readbuf1 ends with an operator or a register, which never happens,
but it's still good to avoid using a stale value.
Problem: v:register not reset after Visual mode command.
(laktak)
Solution: Reset v:register if Visual mode was active before
do_pending_operator() (zeertzjq)
fixes: vim/vim#18579
related: vim/vim#5305closes: vim/vim#18583b3b47e540d
Problem: The ops.c file is too big.
Solution: Move code for dealing with registers to a new file. (Yegappan
Lakshmanan, closesvim/vim#4982)
4aea03eb87
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: ml_delete() often called with FALSE argument.
Solution: Use ml_delete_flags(x, ML_DEL_MESSAGE) when argument is TRUE.
ca70c07b72
Co-authored-by: Bram Moolenaar <Bram@vim.org>
These are not needed after #35129 but making uncrustify still play nice
with them was a bit tricky.
Unfortunately `uncrustify --update-config-with-doc` breaks strings
with backslashes. This issue has been reported upstream,
and in the meanwhile auto-update on every single run has been disabled.
Problem: Autocompletion slow with include- and tag-completion
Solution: Refactor ins_compl_interrupted() to also check for timeout,
further refactor code to skip outputting message when
performing autocompletion (Girish Palya).
Running `vim *` in `vim/src` was slower than expected when
'autocomplete' was enabled. Include-file and tag-file completion
sources were not subject to the timeout check, causing unnecessary
delays.
So apply the timeout check to these sources as well, improving
autocompletion responsiveness, refactor find_pattern_in_path() to take
an additional "silent" argument, to suppress any messages.
closes: vim/vim#1796659e1d7f353
Co-authored-by: Girish Palya <girishji@gmail.com>
Problem: ext_messages is implemented to mimic the message grid
implementation w.r.t. scrolling messages, clearing scrolled
messages, hit-enter-prompts and replacing a previous message.
Meanwhile, an ext_messages UI may not be implemented in a way
where these events are wanted. Moreover, correctness of these
events even assuming a "scrolled message" implementation
depends on fragile "currently visible messages" global state,
which already isn't correct after a previous message was
supposed to have been overwritten (because that should not only
happen when `msg_scroll == false`).
Solution: - No longer attempt to keep track of the currently visible
messages: remove the `msg_ext(_history)_visible` variables.
UIs may remove messages pre-emptively (timer based), or never
show messages that don't fit a certain area in the first place.
- No longer emit the `msg(_history)_clear` events to clear
"scrolled" messages. This opens up the `msg_clear` event to
be emitted when messages should actually be cleared (e.g.
when the screen is cleared). May also be useful to emit before
the first message in an event loop cycle as a hint to the UI
that it is a new batch of messages (vim._extui currently
schedules an event to determine that).
- Set `replace_last` explicitly at the few callsites that want
this to be set to true to replace an incomplete status message.
- Don't store a "keep" message to be re-emitted.
Problem:
Not easy to get user-input in prompt-buffer before the user submits the
input. Under the current system user/plugin needs to read the buffer
contents, figure out where the prompt is, then extract the text.
Solution:
- Add prompt_getinput().
- Extract prompt text extraction logic to a separate function
Problem:
Cannot enter multiline prompts in a buftype=prompt buffer.
Solution:
- Support shift+enter (`<s-enter>`) to start a new line in the prompt.
- Pasting multiline text via OS paste, clipboard, "xp, etc.
- A/I in editable region works as usual.
- i/a/A/I outside of editable region moves cursor to end of current
prompt.
- Support undo/redo in prompt buffer.
- Support o/O in prompt buffer.
- Expose prompt location as `':` mark.
Problem: Vim incorrectly escapes tags containing "[" in a help buffer
Solution: check if the buffer has the "help" filetype set, instead of
already being a help buffer (Phạm Bình An)
fixes: vim/vim#17224closes: vim/vim#172326af20a9be3
Co-authored-by: Phạm Bình An <phambinhanctb2004@gmail.com>
Co-authored-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: Delay for reading a message may be unwanted for ext_messages,
and can be done by the implementation. Empty completion source
error message is not distinguishable as such.
Solution: Only delay without ext_messages enabled. Emit empty completion
source message as an error.
Problem: Various typos in the code, redundant and strange use of
:execute in test_ins_complete.vim (after 9.1.1315).
Solution: Fix typos in the code and in the documentation, use the
executed command directly (zeertzjq).
closes: vim/vim#1714398800979dc
Co-authored-by: Christ van Willegen <cvwillegen@gmail.com>
Problem: 'smoothscroll' gets stuck with 'listchars' "eol".
Solution: Count size of 'listchars' "eol" in line size when scrolling.
(zeertzjq)
related: neovim/neovim#32405closes: vim/vim#166272c47ab8fcd
Problem: exclusive selection not respected when re-selecting block mode
(Matt Ellis)
Solution: advance selection by another character when using
selection=exclusive and visual block mode
fixes: vim/vim#16202closes: vim/vim#16219bb95589473
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Option metadata like list of valid values for an option and
option flags are not listed in the `options.lua` file and are instead
manually defined in C, which means option metadata is split between
several places.
Solution: Put metadata such as list of valid values for an option and
option flags in `options.lua`, and autogenerate the corresponding C
variables and enums.
Supersedes #28659
Co-authored-by: glepnir <glephunter@gmail.com>
Problem: Ext_messages chunks only contain the highlight attr id, which
is not very useful for vim.ui_attach() consumers.
Solotion: Add highlight group id to message chunks, which can easily be
used to highlight text in the TUI through nvim_buf_set_extmark():
hl_group = synIDattr(id, "name").
Problem: Highlight group id is not propagated to the end of the message call
stack, where ext_messages are emitted.
Solution: Refactor message functions to pass along highlight group id
instead of attr id.
while the implementation is not tied to screen chars, it is a reasonable
expectation to support the same size. If nvim is able to display a
multibyte character, it will accept the same character as input,
including in normal mode commands like r{char}
- Fixes 'autoindent' being applied during redo.
- Makes redoing a large paste significantly faster.
- Stores pasted text in the register being recorded.
Fix#28561
Problem:
The name `os_inchar` (from Vim's old `mch_inchar`) is ambiguous:
"inchar" sounds like it could be reading or enqueuing (setting) input.
Its docstring is also ambiguous.
Solution:
- Rename `os_inchar` to `input_get`.
- Write some mf'ing docstrings.
- Add assert() in TRY_READ().
Use the grapheme break algorithm from utf8proc to support grapheme
clusters from recent unicode versions.
Handle variant selector VS16 turning some codepoints into double-width
emoji. This means we need to use ptr2cells rather than char2cells when
possible.
Problem: "dvgo" is not always an inclusive motion
(Iain King-Speir)
Solution: initialize the inclusive flag to false
fixes: vim/vim#15580closes: vim/vim#15582f8702aeb8f
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Code related to findfile() is spread out.
Solution: Put findfile() related code into a new source file. (Yegappan
Lakshmanan, closesvim/vim#3934)
5fd0f5052f
Keep functions related to wildcard expansion in path.c, as in Vim they
are now spread out among multiple files, which isn't really ideal.
Problem:
`'scrollbind'` does not work properly if the window being scrolled
automatically contains any filler/virtual lines (except for diff filler
lines).
This is because when the scrollbind check is done, the logic only
considers changes to topline which are represented as line numbers.
Solution:
Write the logic for determine the scroll amount to take into account
filler/virtual lines.
Fixes#29751
Problem:
Variables are often assigned multiple places in common patterns.
Solution:
Replace these common patterns with different patterns that reduce the
number of assignments.
Use `MAX` and `MIN`:
```c
if (x < y) {
x = y;
}
// -->
x = MAX(x, y);
```
```c
if (x > y) {
x = y;
}
// -->
x = MIN(x, y);
```
Use ternary:
```c
int a;
if (cond) {
a = b;
} els {
a = c;
}
// -->
int a = cond ? b : c;
```
Problem: Current instance of last search pattern not easily spotted.
Solution: Add CurSearch highlighting. (closesvim/vim#10133)
a43993897a
Some code is superseded by later patches that are already ported.
Co-authored-by: LemonBoy <thatlemon@gmail.com>
The latter was mostly relevant with the past char_u madness.
NOTE: STRCAT also functioned as a counterfeit "NOLINT" for clint
apparently. But NOLINT-ing every usecase is just the same as disabling
the check entirely.
Problem: Wrong yanking with exclusive selection and virtualedit=all,
and integer overflow when using getregion() on it.
Solution: Set coladd when decreasing column and 'virtualedit' is active.
Add more tests for getregion() with 'virtualedit' (zeertzjq).
closes: vim/vim#14830701ad50a9e
