Problem: Temp files remain after running tests.
Solution: Delete the right files. (Dominique Pellé, closesvim/vim#8509)
6c72fd51a8
Co-authored-by: Dominique Pelle <dominique.pelle@gmail.com>
Problem: Vim9: breakpoint on "for" does not work.
Solution: Use the right line number in ISN_DEBUG. (closesvim/vim#8486)
6fc0161682
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: debugging lambda does not work.
Solution: Use the compile type of the function when compiling a lambda.
(closesvim/vim#8412)
17d868b8b2
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: breakpoint at a comment line does not work.
Solution: Add the comment line number to the debug instruction.
(closesvim/vim#8429)
8cec9273d2
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: breakpoint in compiled function not always checked.
Solution: Check for breakpoint when calling compiled function from compiled
function.
2ac4b2536a
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: cannot set breakpoint in compiled function.
Solution: Check for breakpoint when calling a function.
4f8f54280f
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: debugger shows too many lines.
Solution: Truncate at a comment, "enddef", etc. (closesvim/vim#8392)
59b50c3bee
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim: when debugging only the first line of a command using line
continuation is displayed.
Solution: Find the next command and concatenate lines until that one.
(closesvim/vim#8392)
4cea536bdf
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: cannot get argument values during debugging.
Solution: Lookup names in the list of arguments. Put debug instruction
halfway for command.
6bc30b05e6
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Vim9: when debugging cannot inspect local variables.
Solution: Make local variables available when debugging.
b69c6fb7b4
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: CI: test_termdebug fails
Solution: only test for a changed winlayout, if the window
width actually changed
Also, include an unrelated comment (which doesn't warrant its own patch
number)
305127f9f2
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Terminal test for current directory not used on FreeBSD.
Solution: Make it work on FreeBSD. (Ozaki Kiichi, closesvim/vim#9516) Add
TermWait() inside Run_shell_in_terminal() as a generic solution.
ced2b38a56
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Not easy to filter the output of maplist().
Solution: Add mode_bits to the dictionary. (Ernie Rael, closesvim/vim#10356)
d8f5f76621
Co-authored-by: Ernie Rael <errael@raelity.com>
Problem: It is not easy to restore saved mappings.
Solution: Make mapset() accept a dict argument. (Ernie Rael, closesvim/vim#10295)
51d04d16f2
Co-authored-by: Ernie Rael <errael@raelity.com>
Problem: Can only get a list of mappings.
Solution: Add the optional {abbr} argument. (Ernie Rael, closesvim/vim#10277)
Rename to maplist(). Rename test file.
09661203ec
Co-authored-by: Ernie Rael <errael@raelity.com>
Problem: Not simple programmatic way to find a specific mapping.
Solution: Add getmappings(). (Ernie Rael, closesvim/vim#10273)
659c240cf7
Co-authored-by: Ernie Rael <errael@raelity.com>
Problem: maparg() does not indicate the type of script where it was defined.
Solution: Add "scriptversion".
a9528b39a6
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: still some issues with term_debug test
Solution: Use WaitForAssert()
closes: vim/vim#1293685c3a5bc26
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: No tests for the termdebug plugin
Solution: Add some simple tests for the termdebug plugin
closes: vim/vim#1292758f39d89a8
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: statusline may look different than expected
Solution: do not check for highlighting of stl and stlnc characters
statusline fillchar may be different than expected
If the highlighting group for the statusline for the current window
|hl-StatusLine| or the non-current window |hl-StatusLineNC| are cleared
(or do not differ from each other), than Vim will use the hard-coded
fallback values '^' (for the non-current windows) or '=' (for the
current window). I believe this was done, to make sure the statusline
will always be visible and be distinguishable from the rest of the
window.
However, this may be unexpected, if a user explicitly defined those
fillchar characters just to notice that those values are then not used
by Vim.
So, let's assume users know what they are doing and just always return
the configured stl and stlnc values. And if they want the statusline to
be non-distinguishable from the rest of the window space, so be it. It
is their responsibility and Vim shall not know better what to use.
fixes: vim/vim#13366closes: vim/vim#134886a650bf696
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: tests: failure in test_arabic
Solution: adjust the test for the changed arabic keymap
2a94e98792
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: complete_info() skips entries with 'noselect'
Solution: Check, if first entry is at original text state
Unfortunately, Commit daef8c74375141974d61b85199b383017644978c
introduced a regression, that when ':set completeopt+=noselect' is set
and no completion item has been selected yet, it did not fill the
complete_info['items'] list.
This happened, because the current match item did not have the
CP_ORIGINAL_TEXT flag set and then the cp->prev pointer did point to the
original flag item, which caused the following while loop to not being
run but being skipped instead.
So when the 'noselect' is set, only start with to the previous selection
item, if the initial completion item has the CP_ORIGINAL_TEXT flag set,
else use the 2nd previous item instead.
fixes: vim/vim#13451closes: vim/vim#1345257f9ce1a09
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: With 'smoothscroll' set, "w_skipcol" is not reset when unsetting 'wrap'.
Resulting in incorrect calculation of the cursor position.
Solution: Reset "w_skipcol" when unsetting 'wrap'.
fixes: vim/vim#12970closes: vim/vim#134391bf1bf569b
Problem: TextChangedI may not always trigger
Solution: trigger it in more cases: for insert/
append/change operations, and when
opening a new line,
fixes: vim/vim#13367closes: vim/vim#133754bca4897a1
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Completion menu may be wrong
Solution: Check for the original direction of the completion menu,
add more tests, make it work with 'noselect'
completion: move in right direction when filling completion_info()
When moving through the insert completion menu and switching directions,
we need to make sure we start at the correct position in the list and
move correctly forward/backwards through it, so that we do not skip
entries and the selected item points to the correct entry in the list
of completion entries generated by the completion_info() function.
The general case is this:
1) CTRL-X CTRL-N, we will traverse the list starting from
compl_first_match and then go forwards (using the cp->next pointer)
through the list (skipping the very first entry, which has the
CP_ORIGINAL_TEXT flag set (since that is the empty/non-selected entry
2) CTRL-X CTRL-P, we will traverse the list starting from
compl_first_match (which now points to the last entry). The previous
entry will have the CP_ORIGINAL_TEXT flag set, so we need to start
traversing the list from the second prev pointer.
There are in fact 2 special cases after starting the completion menu
with CTRL-X:
3) CTRL-N and then going backwards by pressing CTRL-P again.
compl_first_match will point to the same entry as in step 1 above,
but since compl_dir_foward() has been switched by pressing CTRL-P
to backwards we need to pretend to be in still in case 1 and still
traverse the list in forward direction using the cp_next pointer
4) CTRL-P and then going forwards by pressing CTRL-N again.
compl_first_match will point to the same entry as in step 2 above,
but since compl_dir_foward() has been switched by pressing CTRL-N
to forwards we need to pretend to be in still in case 2 and still
traverse the list in backward direction using the cp_prev pointer
For the 'noselect' case however, this is slightly different again. When
going backwards, we only need to go one cp_prev pointer back. And
resting of the direction works again slightly different. So we need to
take the noselect option into account when deciding in which direction
to iterate through the list of matches.
related: vim/vim#13402
related: vim/vim#12971closes: vim/vim#13408daef8c7437
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: objdump files not recognized
Solution: detect *.objdump files, add a filetype plugin
Added the objdump file/text format
closes: vim/vim#1342510407df7a9
Co-authored-by: Colin Kennedy <colinvfx@gmail.com>
Problem: [security] overflow in :history
Solution: Check that value fits into int
The get_list_range() function, used to parse numbers for the :history
and :clist command internally uses long variables to store the numbers.
However function arguments are integer pointers, which can then
overflow.
Check that the return value from the vim_str2nr() function is not larger
than INT_MAX and if yes, bail out with an error. I guess nobody uses a
cmdline/clist history that needs so many entries... (famous last words).
It is only a moderate vulnerability, so impact should be low.
Github Advisory:
https://github.com/vim/vim/security/advisories/GHSA-q22m-h7m2-9mgm9198c1f2b1
N/A patch:
vim-patch:9.0.2073: typo in quickfix.c comments
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: cannot use buffer-number for errorformat
Solution: add support for parsing a buffer number using '%b' in
'errorformat'
closes: vim/vim#13419b731800522
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Janet files are not recognised
Solution: Add filename and shebang detection (without
adding an extra filetype plugin)
Those are used by the Janet language:
http://www.janet-lang.orgcloses: vim/vim#13400c038427d2a
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Problem: not able to detect xkb filetypes
Solution: Detect files below /u/s/X11/xkb as xkb files (without adding
an extra filetype)
Those files are used from the X11 xkb extension
closes: vim/vim#13401ae9021a840
Co-authored-by: Guido Cella <guido@guidocella.xyz>
Problem: tests: avoid error when no swap files exist
Solution: use unlet! so that no error message is reported
in case the variable does not exists
When s:GetSwapFileList() does not find any swapfiles, it will return an
empty list []. This means, that the variable 'name' will not be
declared, cause the following unlet command to fail and causing a 1 sec
delay on running the tests.
So let's instead use the :unlet! command which simply skips reporting an
error when the variable given as parameter does not exists.
closes: vim/vim#13396a36acb7ac4
Problem: no digraph for quadruple prime
Solution: add quadruple prime digraph using 4'
closes: vim/vim#1338047416d1a74
Co-authored-by: Jonathan Wright <quaggy@gmail.com>
Problem: zig filetype detection test wrong
Solution: Remove .zir pattern, add new test for .zon pattern
closes: vim/vim#13389a8c664a042
Co-authored-by: Gregory Anders <greg@gpanders.com>
Problem: Vim9: crash with deferred function call and exception
Solution: Save and restore exception state
Crash when a deferred function is called after an exception and another
exception is thrown
closes: vim/vim#13376closes: vim/vim#13377c59c1e0d88
The change in check_due_timer() is N/A as Nvim calls timer callbacks on
the main loop.
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: tests: checking for swap files takes time
Solution: don't check for swap files when test has been skipped
Check for swap files takes a considerable about of time, so don't do
that for skipped tests to avoid wasting time.
closes: vim/vim#13371a0e1f06f04
