inotifywait man page specifies:
The file must be specified with a relative or absolute path according to whether a relative or absolute path is given for watched directories.
So it would only work this way in case the path is relative (which at least for gopls it is not)
Problem:
Some language servers (e.g., rust-analyzer, texlab) are desynced when
the user deletes the entire contents of the buffer. This is due to the
discrepancy between how nvim computes diff and how nvim treats empty
buffer.
* diff: If the buffer became empty, then the diff includes the last
line's eol.
* empty buffer: Even if the buffer is empty, nvim regards it as having
a single empty line with eol.
Solution:
Add special case for diff computation when the buffer becomes empty so
that it does not include the eol of the last line.
Problem: CompletionItem in lsp spec mentioned the deprecated attribute
Solution: when item has deprecated attribute set hl_group to DiagnosticDeprecated
in complete function
**Problem:** With anonymous nodes toggled in the inspect tree, only
named nodes will be highlighted when moving the cursor in the source
code buffer.
**Solution:** Retrieve the anonymous node at the cursor (when toggled on
in the inspect tree) and highlight them when appropriate, for better
clarity/specificity.
This is identical to `named_node_for_range` except that it includes
anonymous nodes. This maintains consistency in the API because we
already have `descendant_for_range` and `named_descendant_for_range`.
Problem: filetype: SuperHTML template files not recognized
Solution: Update the filetype detection code to detect '*.shtml' either
as HTML (Server Side Includes) or SuperHTML (template files)
(EliSauder)
related: vim/vim#15355
related: vim/vim#15367e57c9a19ed
Co-authored-by: EliSauder <24995216+EliSauder@users.noreply.github.com>
Reverts https://github.com/neovim/neovim/pull/29212 and adds a few
additional test cases
From the spec
> All text edits ranges refer to positions in the document they are
> computed on. They therefore move a document from state S1 to S2 without
> describing any intermediate state. Text edits ranges must never overlap,
> that means no part of the original document must be manipulated by more
> than one edit. However, it is possible that multiple edits have the same
> start position: multiple inserts, or any number of inserts followed by a
> single remove or replace edit. If multiple inserts have the same
> position, the order in the array defines the order in which the inserted
> strings appear in the resulting text.
The previous fix seems wrong. The important part:
> If multiple inserts have the same position, the order in the array
> defines the order in which the inserted strings appear in the
> resulting text.
Emphasis on _appear in the resulting text_
Which means that in:
local edits1 = {
make_edit(0, 3, 0, 3, { 'World' }),
make_edit(0, 3, 0, 3, { 'Hello' }),
}
`World` must appear before `Hello` in the final text. That means the old
logic was correct, and the fix was wrong.
Problem: filetype: Make syntax highlighting off for MS Makefiles
Solution: Try to detect MS Makefiles and adjust syntax rules to it.
(Ken Takata)
Highlighting of variable expansion in Microsoft Makefile can be broken.
E.g.:
2979cfc262/src/Make_mvc.mak (L1331)
Don't use backslash as escape characters if `make_microsoft` is set.
Also fix that `make_no_comments` was not considered if `make_microsoft`
was set.
Also add description for `make_microsoft` and `make_no_comments` to the
documentation and include a very simple filetype test
closes: vim/vim#15341eb4b903c9b
Co-authored-by: Ken Takata <kentkt@csc.jp>
Fix the following two issues:
- pyenv root detection issue
When `PYENV_ROOT` environment variable is not set, neovim will detect
pyenv's root via `pyenv root` command, but which will be always fail
because `vim.fn.system()` returns result with additional `\n`. Using
`vim.system` instead prevents this problem. to trim it before check
whether it is exists
- python executable path detection issue
Filter unrelated `python-config` in cases where multiple python versions
are installed, e.g. `python-config`, `python3.10-config`,
`python3.11-config` etc.
Problem: filetype: OpenGL Shading Language files are not detected
Solution: detect various file extensions as GLSL filetype, include
indent and syntax script, do no longer recognize '*.comp'
as Mason filetype (Gregory Anders)
closes: vim/vim#15317e4b991ed36
Problem: pattern detection for Dracula language uses "*lvs" and "*lpe".
as there is no dot, those are not treated as extensions which
they should (judging by 'runtime/syntax/dracula.vim' and
common sense).
Solution: use "*.lvs" and "*.lpe" patterns (Evgeni Chasnovski)
closes: vim/vim#153035fb801a74f
Co-authored-by: Evgeni Chasnovski <evgeni.chasnovski@gmail.com>
Problem: calling `vim.filetype.match()` has performance bottleneck in
that it has to match a lot of Lua patterns against several versions of
input file name. This might be the problem if users need to call it
synchronously a lot of times.
Solution: add "parent pattern pre-matching" which can be used to quickly
reject several potential pattern matches at (usually rare) cost of
adding time for one extra Lua pattern match.
"Parent pattern" is a manually added/tracked grouping of filetype
patterns which should have two properties:
- Match at least the same set of strings as its filetype patterns.
But not too much more.
- Be fast to match.
For them to be effective, group should consist from at least three
filetype patterns.
Example: for a filetpye pattern ".*/etc/a2ps/.*%.cfg", both "/etc/"
and "%.cfg" are good parent patterns (prefer the one which can group
more filetype patterns).
After this commit, `vim.filetype.match()` on most inputs runs ~3.4
times faster (while some inputs may see less impact if they match
many parent patterns).
Problem: filetype: Debian devscripts config files are not recognized
Solution: detect devscripts.conf and .devscripts files as sh filetype
(sourced by /bin/sh)
closes: vim/vim#1522776c19028ff
Co-authored-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Problem:
When there are multiple inlay hints present at the same position, they
should be rendered in the order they are received in the response from
LSP as per the LSP spec. Currently, this is not respected.
Solution:
Gather all hints for a given position, and then set it in a single
extmark call instead of multiple set_extmark calls. This leads to fewer
extmark calls and correct inlay hints being rendered.
**Problem:** A query file for something like `html_tags` will not be
given html node completion
**Solution:** Check for parser aliases before offering completions
Co-authored-by: Lewis Russell <me@lewisr.dev>
Problem: filetype: Mediawiki files are not recognized
Solution: detect "*.mw" and "*.wiki" as mediawiki filetype,
include basic syntax and filetype plugins.
(AvidSeeker)
closes: vim/vim#15266b5844104ab
Co-authored-by: AvidSeeker <avidseeker7@protonmail.com>
Problem: ocaml runtime files are outdated
Solution: sync those files with the upstream repo,
detect a few more ocaml files
(Yinzuo Jiang)
closes: vim/vim#15260700cf8cfa1
Co-authored-by: Yinzuo Jiang <jiangyinzuo@foxmail.com>
Problem: due to single list of sorted patterns, their matching inside
`vim.filetype.match()` was done very similarly but with extra checks
to stop processing negative priority patterns before extensions.
Solution: create separated sorted lists for patterns with non-negative
and negative priorities. This allows to process them in a single
extracted function making the main codeflow a bit nicer and more
easily expandable.
Problem: filetype: htmlangular files are not properly detected
Solution: Use the new htmlangular filetype for angular files, because
since angular v17, those are no longer valid HTML files.
(Dennis van den Berg)
Since Angular 17, the new Control Flow Syntax is not valid HTML. This PR
adds a new filetype detection for the HTML templates of Angular.
It first checks the filename. The Angular convention is to use
*.component.html for the template. However, this is not mandatory.
If the filename does not match, it will check the contents of the file
if it contains:
- One of the Control-Flow blocks: @if, @for, @switch, @defer
- A structural directive: *ngIf, *ngFor, *ngSwitch, *ngTemplateOutlet
- Builtin Angular elements: ng-template or ng-content
- String interpolation: {{ something }}
This enables the Angular LSP to attach only to htmlangular filetypes, as
well as language parsers, such as tree-sitter.
closes: vim/vim#151901ad194c0df
Co-authored-by: Dennis van den Berg <dennis.vandenberg@nedap.com>
Problem: filetype: antlr4 files are not recognized
Solution: Detect '*.g4' as antlr4 filetype, include a simple antlr4
syntax and filetype plugin (Yinzuo Jiang)
closes: vim/vim#151914a7a4a3675
Co-authored-by: Yinzuo Jiang <jiangyinzuo@foxmail.com>
Problem: No way to get the arity of a Vim function
(Austin Ziegler)
Solution: Enhance get() Vim script function to return the function
argument info using get(func, "arity") (LemonBoy)
fixes: vim/vim#15097closes: vim/vim#1510948b7d05a4f
Co-authored-by: LemonBoy <thatlemon@gmail.com>
Problem: `vim.filetype.match()` tries to match on contents even if there
is no contents (empty buffer or `{''}` explicit contents).
This results in extra avoidable execution duration for cases.
It matters, for example, when trying to match filetype based solely
on file name (which still needs `contents` or `buf` to properly match
earlier in the code path).
Solution: skip matching based solely on contents if it is `{''}`. This
works because:
- Matching solely on content is done after any user-configured
`vim.filetype.add()` hooks.
- All default matching on content might depend on supplied path
*only* if there is non-empty content (like in
`require('vim.filetype.detect').match_from_hashbang()`).
