It is perfectly fine and expected to detach from the screen just by
the UI disconnecting from nvim or exiting nvim. Just keep detach() in
screen_basic_spec, to get some coverage of the detach method itself.
This avoids hang on failure in many situations (though one could argue
that detach() should be "fast", or at least "as fast as resize",
which works in press-return already).
Never use detach() just to change the size of the screen, try_resize()
method exists for that specifically.
PR #8221 took a short-cut when implementing the tests: screen.lua would
translate the linegrid highlight ids back into the old per-cell
attribute description.
Apart from cleaning up technical debt, this enables to check both rgb
and cterm colors in the same expect(), which previously was needlessly
restricted to ext_hlstate tests only.
Meant to fix:
[ ERROR ] test/functional/terminal/tui_spec.lua @ 925: TUI FocusGained/FocusLost in terminal-mode
test/functional/ui/screen.lua:587: Row 6 did not match.
Expected:
|{1:r}eady $ |
|[Process exited 0] |
| |
| |
| |
|*gained |
|{3:-- TERMINAL --} |
Actual:
|{1:r}eady $ |
|[Process exited 0] |
| |
| |
| |
|*:terminal |
|{3:-- TERMINAL --} |
To print the expect() call that would assert the current screen state, use
screen:snapshot_util(). In case of non-deterministic failures, use
screen:redraw_debug() to show all intermediate screen states.
stack traceback:
test/functional/ui/screen.lua:587: in function '_wait'
test/functional/ui/screen.lua:370: in function 'expect'
test/functional/terminal/tui_spec.lua:934: in function <test/functional/terminal/tui_spec.lua:925>
I've thought about adding this, but it might not be really relevant, and
slows down the tests a bit (and a warning "warning: Screen test
succeeded immediately" with another test):
```diff
diff --git i/test/functional/terminal/tui_spec.lua w/test/functional/terminal/tui_spec.lua
index ada073c4e..4bc2ab4e0 100644
--- i/test/functional/terminal/tui_spec.lua
+++ w/test/functional/terminal/tui_spec.lua
@@ -818,6 +818,11 @@ describe('TUI FocusGained/FocusLost', function()
..'", "-u", "NONE", "-i", "NONE", "--cmd", "set noswapfile noshowcmd noruler"]')
feed_data(":autocmd FocusGained * echo 'gained'\n")
feed_data(":autocmd FocusLost * echo 'lost'\n")
+ -- Wait for autocommand to be registered.
+ retry(nil, nil, function()
+ feed_data(":autocmd FocusLost\n")
+ screen:expect{any=" echo 'lost'"}
+ end)
feed_data("\034\016") -- CTRL-\ CTRL-N
end)
```
* handle_background_color: short-circuit if handled already
* Unit tests for handle_background_color
* set waiting_for_bg_response to false in tui_terminal_after_startup
By then it should have been received.
Doing the screen test first might give insights about a possible
(flaky?) failure, where it looks like "feed_data" is processed out of
order:
[ ERROR ] test/functional/terminal/tui_spec.lua @ 561: TUI paste: exactly 64 bytes #10311
test/functional/helpers.lua:388:
retry() attempts: 490
test/functional/terminal/tui_spec.lua:66: Expected objects to be the same.
Passed in:
(table: 0x44042de8) {
*[1] = ' endzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz' }
Expected:
(table: 0x41d6e568) {
*[1] = 'zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz end' }
stack traceback:
test/functional/helpers.lua:388: in function 'retry'
test/functional/terminal/tui_spec.lua:63: in function 'expect_child_buf_lines'
test/functional/terminal/tui_spec.lua:569: in function <test/functional/terminal/tui_spec.lua:561>
Ref: https://github.com/neovim/neovim/pull/11083#issuecomment-534375201
Build log: https://travis-ci.org/neovim/neovim/jobs/588749739#L5597
Before this, --embed UIs (without --headless) would not trigger UIEnter.
For TUI, maybe UIEnter isn't useful, but:
- It is less "surprising"/special.
- Makes documentation simpler.
- When TUI becomes a coprocess, it will happen anyway.
simplify handling of default colors
nvim is always true color internally, remove ui_rgb_attached() check.
Fix "runtime termguicolors" test. The test actually reflected broken behavior
in (parent) nvim: nvim_ui_set_option("rgb", true) was not respected by existing
:terminal instances, so all 16-palette colors became dark blue.
Forcing insert-mode after the first paste-chunk seems to work, as an
alternative to a9e2bae0eb (insert-before-cursor).
NB: Dot-repeat needs to match the original action. Since a9e2bae0eb
changed paste to insert-before-cursor, dot-repeat must also. But that
makes dot-repeat unpleasant/unusual.
Inserting "after" the cursor in Normal-mode, for big paste-streams, is
not reliable: sometimes the text "after" the cursor ends up in the
middle of the pasted text. Maybe the cursor position is not updated?
To avoid weird behavior, always paste "before". Maybe nvim_put() or
vim.paste() can be fixed more properly later.
Problem: If multiple paste "chunks" are streamed, chunks after the
first line are pasted into the buffer.
Solution: Check for cmdline-mode for all chunks in a paste-stream.
- Workaround #10966: 'paste' option is not always reset.
- In any case there's not much reason to wait until phase=3, because
pasting in cmdline-mode skips lines after the first line (thus the
`:set paste .. :set nopaste` dance happens only ~once).
* longer timeout with first expect
* Wait for :term to be ready
Failure seen on quickbuild (note the "retry() attempts: 1"):
09:41:07,627 INFO - # test/functional/terminal/tui_spec.lua @ 437: TUI FocusGained/FocusLost in terminal-mode
09:41:07,627 INFO - not ok 2976 - TUI FocusGained/FocusLost in terminal-mode
09:41:07,627 INFO - # test/functional/terminal/tui_spec.lua @ 437
09:41:07,627 INFO - # Failure message: ./test/functional/helpers.lua:403:
09:41:07,627 INFO - # retry() attempts: 1
09:41:07,627 INFO - # ./test/functional/ui/screen.lua:579: Row 1 did not match.
09:41:07,627 INFO - # Expected:
09:41:07,627 INFO - # |*{1:r}eady $ |
09:41:07,627 INFO - # |[Process exited 0] |
09:41:07,627 INFO - # | |
09:41:07,627 INFO - # | |
09:41:07,627 INFO - # | |
09:41:07,627 INFO - # |gained |
09:41:07,628 INFO - # |{3:-- TERMINAL --} |
09:41:07,628 INFO - # Actual:
09:41:07,628 INFO - # |*{1: } |
09:41:07,628 INFO - # |{4:~ }|
09:41:07,628 INFO - # |{4:~ }|
09:41:07,628 INFO - # |{4:~ }|
09:41:07,628 INFO - # |{5:[No Name] }|
09:41:07,628 INFO - # | |
09:41:07,628 INFO - # |{3:-- TERMINAL --} |
09:41:07,628 INFO - #
09:41:07,628 INFO - # To print the expect() call that would assert the current screen state, use
09:41:07,628 INFO - # screen:snapshot_util(). In case of non-deterministic failures, use
09:41:07,628 INFO - # screen:redraw_debug() to show all intermediate screen states.
09:41:07,628 INFO - # stack traceback:
09:41:07,628 INFO - # ./test/functional/helpers.lua:403: in function 'retry'
09:41:07,628 INFO - # test/functional/terminal/tui_spec.lua:441: in function <test/functional/terminal/tui_spec.lua:437>
Adapt some tests for OpenBSD:
- scrollback_spec:
- seq(1) is not available on OpenBSD: we'd use jot(1).
- Instead use a (hopefully) portable awk(1) snippet.
- channels_spec
- job_spec
- tui_spec
- All "chunks" in a paste-stream should form a single undo-block. Side
effect of 7a85792884 was to create an undo-block for each chunk.
- Also: remove old :redraw force logic, irrelevant after 7a85792884.
Otherwise cursor and redraw code for normal and insert mode will not run. The
"tickle" workaround was used for this instead, and can now be removed.
The builtin vim.lua got the name
[string "-- Nvim-Lua stdlib: thevimmodule (:help l..."]
in error messages. Fix it to something reasonable.
- Introduce TRY_WRAP() until we have an *architectural* solution.
- TODO: bfredl idea: prepare error-handling at "top level" (nv_event).
- nvim_paste(): Revert luaeval() hack (see parent commit).
- With TRY_WRAP() in nvim_put(), 'nomodifiable' error now correctly
"bubbles up".
- nvim_paste(): Marshal through luaeval() instead of nvim_execute_lua()
because the latter seems to hide some errors.
- Handle 'nomodifiable' in `nvim_put()` explicitly.
- Require explicit `false` from `vim.paste()` in order to "cancel",
otherwise assume true ("continue").
- Show error only once per "paste stream".
- Drain remaining chunks until phase=3.
- Lay groundwork for "cancel".
- Constrain semantics of "cancel" to mean "client must stop"; it is
unrelated to presence of error(s).
Workaround this failure:
[ ERROR ] test/functional/terminal/tui_spec.lua @ 192: TUI paste: exactly 64 bytes
test/functional/helpers.lua:403:
retry() attempts: 478
test/functional/terminal/tui_spec.lua:201: Expected objects to be the same.
Passed in:
(table: 0x47cd77e8) {
*[1] = 'zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz endz' }
Expected:
(table: 0x47cd7830) {
*[1] = 'zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz end' }
This happens because `curwin->w_cursor.col` is sometimes decremented at
the end of `do_put`... because the editor is in Normal-mode instead of
the expected Insert-mode.
Caused by "typeahead race" (#10826): there may be queued input in the
main thread not yet processed, thus the editor mode (`State` global)
will be "wrong" during paste. Example: input "i" followed immediately by
a paste sequence:
i<start-paste>...<stop-paste>
^
"i" does not get processed in time, so the editor is in
Normal-mode instead of Insert-mode while handling the paste.
Attempted workarounds:
- vim.api.nvim_feedkeys('','x',false) in vim._paste()
- exec_normal() in tinput_wait_enqueue()
- LOOP_PROCESS_EVENTS(&main_loop,…,0) in tinput_wait_enqueue()
ref #10826
Fixes strange behavior where sometimes the buffer contents of a series
of paste chunks (vim._paste) would be out-of-order.
Now the tui_spec.lua screen-tests are much more reliable. But they still
sometimes fail because of off-by-one cursor (caused by "typeahead race"
resulting in wrong mode; fixed later in this patch-series).
Björn Linse