Problem: Multiple eol_right_align virtual texts with different widths
are incorrectly positioned. The lookahead loop uses `item` instead of
`lookaheadItem` when checking kind and accessing data, causing all
items to use the first item's width.
Solution: Use `lookaheadItem->kind` and `lookaheadItem->data.vt`
instead of `item->kind` and `item->data.vt` in the lookahead loop.
Problem: When checking a .po file (make -C src/po check), errors are not
displayed.
Solution: Adding "silent" to some normal commands in check.vim
suppresses unnecessary output (Muraoka Taro)
This is because the output of check.vim is redirected to /dev/null.
However, if you stop the redirection, check.vim generates a lot of
output and becomes very slow.
When these commands are run in ex mode, they output the contents of the
line the cursor is pointing to. This caused a lot of output.
closes: vim/vim#192273456303430
Co-authored-by: Muraoka Taro <koron.kaoriya@gmail.com>
Problem: check.vim complains about overlong comment lines
Solution: only check the length of non-commented lines
32a5faa6d7
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Overlong translation files may cause repo to become "dirty"
Solution: Add a test into check.vim to warn for lines being longer than
80 virt columns
related: vim/vim#144906f585da00b
Co-authored-by: Christian Brabandt <cb@256bit.org>
fix(api): auto-load buffers in nvim_buf_set_* operations
Problem: Setting marks, lines, or text on unloaded buffers fails because
ml_line_count is not accurate until the buffer is loaded.
Solution: Add require_loaded_buffer() helper and use it in write operations
(nvim_buf_set_lines, nvim_buf_set_text, nvim_buf_set_mark). These now
auto-load buffers as needed.
Problem:
Crashed Nvim leaves socket files. Subsequent starts fail with "address already in use".
Solution:
On bind failure, test socket liveness via connect(). Remove if stale, retry bind().
Fixes#36581
Problem:
With shadow border, scrollbar and border overlap. Shadow's right border
starts from the second row (offset by 1), but scrollbar renders on every
row including the first. If they share a column, the first row shows
scrollbar where shadow hasn't started yet, causing misalignment.
Solution:
Separate scrollbar from the shadow's right border.
Problem: Crash with 'wildmenu' when typing Ctrl-Y after Ctrl-A
(after 9.1.1714) (fizz-is-on-the-way).
Solution: Check if there are matches before applying one (zeertzjq).
closes: vim/vim#19210311b98d942
Problem: :wqall! doesn't quit when using :quit in BufWritePost
(after 8.0.1190).
Solution: Restore old value of "exiting" when calling not_exiting()
instead of always resetting it to FALSE (zeertzjq).
related: vim/vim#2205
closes: vim/vim#19212e803ad1c56
Problem: TabClosedPre may be triggered twice for the same tab page when
closing another tab page in BufWinLeave (after 9.1.1211).
Solution: Store whether TabClosedPre was triggered in tabpage_T
(zeertzjq).
Also fix the inconsistency that :tabclose! triggers TabClosedPre after
a failed :tabclose, but :close! doesn't even if there is only one window
in the tab page.
closes: vim/vim#192119168a04e0c
Problem: heap-use-after-free when wiping buffer in TabClosedPre.
Solution: Check window_layout_locked() when closing window(s) in another
tabpage (zeertzjq).
closes: vim/vim#191968fc7042b3d
Problem: TabClosedPre is triggered just before the tab is being freed,
which limited its functionality.
Solution: Trigger it a bit earlier and also on :tabclose and :tabonly
(Jim Zhou)
closes: vim/vim#16890bcf66e0141
Co-authored-by: Jim Zhou <jimzhouzzy@gmail.com>
Problem: A message ending in an unprintable character may emit a
msg_show event with the "empty" kind. No empty message event
for echom "".
Solution: Adjust conditions for emitting "empty" msg_show events.
Problem:
Creating an autocommand which executes `:bwipe` on the Syntax event
causes a heap-use-after-free.
Solution: set BF_SYN_SET flag before applying autocommands
Problem:
When text is too long, it overflows into the border. This happens because
grid_line_maxcol includes border columns, so grid_line_puts can write
there.
Solution:
Truncate string to available width when need_fcs_trunc is set.
When width1 and width2 are negative the assertion may fail. It seems
that adding a negative value to w_curswant won't cause any problems, so
just change the assertion.
Problem: nvim_parse_expression null pointer dereference with unmatched ]
followed by a node.
Solution: if ast_stack was empty, set new_top_node_p to top of the stack after
pushing the list literal node; similar to what's done for curlies.
This bug was originally found by a Matrix user, but I couldn't remember how to
trigger it... Ran into the other crash while finding a repro. :P
Problem: nvim_parse_expression null pointer dereference when parsing an
identifier followed by { with "highlight" parameter set to false.
Solution: only set opening_hl_idx if pstate->colors is not NULL.
Not added to parser_tests.lua as that uses highlight = true.
Problem: Crash with combination of terminal popup and autocmd.
Solution: Disallow closing a popup that is the current window. Add a check
that the current buffer is valid. (closesvim/vim#5754)
cee52204ca
Cherry-pick related changes from patch 9.0.1454.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Last buffer not freed with EXITFREE (after 9.1.2087).
Solution: Free the last buffer when inside free_all_mem()
(zeertzjq).
This isn't really a memory leak, as the last buffer's memory is still
reachable via pointers like firstbuf and lastbuf. But it's possible that
this may cause false ASAN warnings in the future, which is what EXITFREE
is supposed to prevent.
closes: vim/vim#191946c118afeaa
Problem: Crash when using :tabonly in BufUnload.
Solution: Set curbuf when setting curwin->w_buffer. Don't wipe out a
buffer if there are no other buffers. Don't decrement
b_nwindows if it was 0 before buf_freeall() (zeertzjq).
fixes: vim/vim#19088#issuecomment-3710172769
closes: vim/vim#19186fa64f92f6a
Problem: Error message for layout change does not match action.
Solution: Pass the command to where the error is given. (closesvim/vim#11573)
9fda81515b
Thinking about this again, it's actually OK to check split_disallowed in
window_layout_locked(), so add the check.
Also add missing window_layout_locked() in tabpage_close().
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Redundant NULL checks in find_pattern_in_path().
Solution: Remove the NULL checks. Also fix typos in test_diffmode.vim
(zeertzjq).
After assigning to inc_opt on line 2976, it's dereferenced immediately,
and not assigned another value afterwards, so checking for NULL after
line 2977 is redundant.
closes: vim/vim#19185ce394b13e9
Problem: crash with WinNewPre autocommand, because window
structures are not yet safe to use
Solution: Don't trigger WinNewPre on :tabnew
fb3f969936
Cherry-pick doc updates from latest Vim runtime.
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: win_splitmove fires WinNewPre and possibly WinNew when moving
windows, even though no new windows are created.
Solution: don't fire WinNew and WinNewPre when inserting an existing
window, even if it isn't the current window. Improve the
accuracy of related documentation. (Sean Dewar)
related: vim/vim#1403896cc4aef3d
Most of the patch was already ported. This includes the remaining part.
Co-authored-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Problem: No event is triggered before creating a window.
(Sergey Vlasov)
Solution: Add the WinNewPre event (Sergey Vlasov)
fixes: vim/vim#10635closes: vim/vim#127611f47db75fd
Not sure if this should be triggered before creating a floating window,
as its use case is related to window layout.
Co-authored-by: Sergey Vlasov <sergey@vlasov.me>
Problem: The typebuf_was_filled flag is sometimes not reset, which may
cause a hang.
Solution: Make sure typebuf_was_filled is reset when the typeahead buffer is
empty.
e49b4bb895
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: memory leak when not evaluating (just parsing) invalid literal
dict.
Solution: Always clear the key's typval (Sean Dewar)
Though "check_typval_is_value(&tv) == FAIL && !evaluate" is maybe never
true, also always clear tvs if check_typval_is_value fails; at worst
this would be a no-op as their initial types are VAR_UNKNOWN.
closes: vim/vim#19178b10a3e1a20
check_typval_is_value change is for Vim9 script. (from 9.0.2163)
N/A patch:
vim-patch:9.0.2163: Vim9: type can be assigned to list/dict
Co-authored-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Problem: nvim_get_option_value with "filetype" set can crash if autocommands
open the dummy buffer in more windows, or if &bufhidden == "wipe".
Solution: Attempt to close all dummy buffer windows before wiping. Promote the
dummy buffer to a normal buffer if that fails.
Removed code doesn't seem to do anything? Looks like a clobbered remnant from
when do_filetype_autocmd lived in did_set_string_option.
Doc comment for wipe_buffer doesn't decrement top_file_num since a2d25b7 (2016),
which presumably means the comment on marks doesn't apply either. (fmark_T::fnum
can't refer to the wrong buffer as numbers aren't reused here anymore)
Problem: When the "filetype" key is set for nvim_get_option_value, autocommands
can crash Nvim by prematurely wiping the dummy buffer, or cause options intended
for it to instead be set for unrelated buffers if switched during OptionSet.
Solution: Don't crash. Also quash side-effects from setting the buffer options.
Problem: crash with NFA regex engine when searching for composing chars
(SuyueGuo)
Solution: When there is no composing character, break out of the loop
and check that out1 state is not null
fixes: vim/vim#15583c3a02d78bd
Test uses DBCS 'encoding', which is N/A.
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: possible crash with 2byte encoding and glob2regpat()
Solution: Skip over character, if it is multi-byte character
1c815b54bb
Co-authored-by: Christian Brabandt <cb@256bit.org>
