Problem: `TSLangInfo` annotation does not reflect the structure returned
by `vim.treesitter.language.inspect()`.
Solution: Move version information under new (optional since ABI 15 only)
`TSLangMetadata` field.
Problem:
vim.uv.spawn will emit ENOENT for either when the cmd or cwd do not
exist and does not tell you which.
Solution:
If an error occurs, check if cwd was supplied and included in the error
message if it does not exist.
Problem: Unable to emit a message with arbitrary kind.
Solution: Add a "kind" opts field to nvim_echo().
Use it to set the "list_cmd" kind for vim.show_pos().
Problem: Calculated cmdline cursor position can be smaller than 0.
Prompt part of the cmdline is translated, while it should
support "\t" characters.
Solution: Remove prompt part from the stored "cmdbuff" and get rid of
dubious +/-1 from cmdline cursor calculation.
Problem: An already open "more" window is the most convenient place
to route messages to with `cfg.msg.pos == 'cmd'`. Instead we
route to the cmdline (unless that message also exceeds
'cmdheight').
Solution: Route to "more" window while it is open and scroll to bottom
to show the newest message. This is more convenient and more
efficient due to not writing to the target buffer first (which
is done to calculate the height of the message).
(Ensure message highlights are deleted when text is replaced.)
Problem: Bulking message lines to write in a single API call is
complicated and still not correct w.r.t. overwriting
highlights.
Solution: Write each chunk pattern separately with it's highlight
such that it will be spliced correctly for message chunks
that contain a carriage return. Go with correctness over
performance until this proves to be too inefficient.
Also add an identifying name to the various extui buffers.
Problem: Using tracked message column as column in cleared buffer.
Solution: Ensure column does not exceed current line length.
Further work to ensure carriage return and cmdline block mode
work properly.
Problem: "99 searchcount ought to be enough for anyone."
Solution: Increase `SEARCH_STAT_DEF_MAX_COUNT` to 999, which I'm sure
will suffice for the next twenty years.
Co-authored-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Problem: Consecutive "msg_show" events stemming from an `:echon`
command are supposed to be appended without a newline, this
information is not encoded in the "msg_show" event.
Solution: Add an "append" parameter to the "msg_show" event that is set
to true to indicate the message should not start on a new line.
Considered alternative: Emit a newline for the common case instead at the
start of a new message. That way UIs can more closely follow the logic
as it is implemented for the message grid currently. This would be a
breaking change. The "append" parameter seems OK.
Problem:
Because the buffer in the window may change before the request is completed, foldclose() might be executed on the wrong buffer.
Solution:
Avoid that.
|vim.glob.to_lpeg()| uses a new LPeg-based implementation (Peglob) that
provides ~50% speedup for complex patterns. The implementation restores
support for nested braces and follows LSP 3.17 specification with
additional constraints for improved correctness and resistance to
backtracking edge cases.
- Fixed syntax highlighting for ksh93 namespace variables starting
with '${.'
- Added support for the alarm, eloop, fds, mkservice, pids, poll and
sha2sum builtins (which are indeed ksh93 builtins, albeit whether or
not they are available depends on the ksh release and the compiled
SHOPT options).
- Added support for the many Unix commands provided by ksh93's libcmd
as builtin commands (since these are general commands, scripts for
other shells like bash will also highlight these).
- The dumps for the sh_0{2,5,6,8,9}.sh were recreated due to this
change affecting commands those scripts call (e.g. 'wc').
- Enabled ${parameter/pattern/string} and friends for ksh syntax.
- Enabled case modification for ksh. See also:
https://github.com/ksh93/ksh/commit/c1762e03
- Enabled ;;& support for ksh. See also:
https://github.com/ksh93/ksh/commit/fc89d20a
- Added many special ksh variables using 93u+m's data/variables.c
as a reference.
If vim can't figure out which ksh release is in play using e.g.
the hashbang path, in such a case a generic default that enables
everything and the kitchen sink will be used. Otherwise, features will
be disabled if it's absolutely known a certain feature will not be
present. Examples:
- ERRNO is ksh88 specific, so that is locked to ksh88.
- Only 93u+m (assumed for generic) has SRANDOM, and only 93u+m
and 93v- have case modification support.
- 93u+ and 93v- have VPATH and CSWIDTH variables (the latter
is vestigal, but still present in the hardcoded variable table).
- 93v- and ksh2020 have (buggy and near unusable) implementations
of compgen and complete.
- Only mksh provides function substitutions, i.e. ${|command;}.
This took the better part of my day to implement. It seems to work well
enough though. (Also had to regenerate the dumps again while testing
it, as now there are dup scripts with mere hashbang differences, used
solely for testing syntax highlighting differences.)
closes: vim/vim#17348https://github.com/vim/vim/commit/b0691b46bd684940efe2ebd56db0ca1c38b02a34
Co-authored-by: Johnothan King <johnothanking@protonmail.com>
Problem: A "search_cmd" message alters the message state (since 8e8f4523),
unnecessarily affecting logic for messages that follow.
Solution: Reset the appropriate variables after a "search_cmd" message.
Don't show "search_cmd" message with zero 'cmdheight'.
Problem:
- Lesson 7.3 (Cmdline Completion) teaches an important way to discover
Nvim features. I think users should learn it before they start
configuring Nvim
- Nvim can be configured in Lua as well, but lesson 7.2 (Configuring
Nvim) only mentions init.vim. And I think Nvim is promoting Lua more
Solution:
- Move lesson 7.2 to be after lesson 7.3
- Lesson 7.2 should teach about init.lua
Co-authored-by: Justin M. Keyes <justinkz@gmail.com>
The root_markers field can now contain a table of tables (as of
https://github.com/neovim/neovim/pull/33485) and :checkhealth will show
an error in that case since Lua cannot concatenate a table of tables.
Ensure that tables contain strings before concatenating and if not, fall
back to using vim.inspect().
Problem: The Github repo link in the Contribution section has been
archived for 5 years. So people who want to contribute to the
tutor plugin should just send PR to Vim repo, similar to most
other Vim features, so there is no need for a Contribution
section in the plugin doc.
Solution: Replace it with an Original Author note at the beginning of
the help document.
closes: vim/vim#17341https://github.com/vim/vim/commit/5a8f9958e23ef0636425c0845fb534cc5c5319f8
Problem:
No way for a user to limit 'exrc' search in parent directories (compare
editorconfig.root).
Solution:
A configuration file can unset 'exrc', disabling the search for its
parent directories.
fix: set manwidth to not exceed the window width
If we set the MANWIDTH variable to a value wider than the window, the
contents wrap and formatting breaks. A more sensible way to handle this
is to interpret MANWIDTH as a maximum width, but to set the width to the
window size if smaller.
See also: #9023, #10748.
Problem:
The exrc file in the current directory is executed twice, here and in
`do_exrc_initalization()`.
Solution:
Start search from parent directory. Let core handle exrc in current
directory.
* Don't specify wayclip mimetype
Problem: Since wayclip 0.2, wayclip assumes UTF-8
(text/plain;charset=utf-8) in absence of an explicit mimetype.
Since Neovim sets the mimetype to "text/plain" without
specifying UTF-8, you will also have to use `-t text/plain`
when using waypaste or wayclip outside of Neovim.
Solution: Don't specify mimetype when using wayclip, thereby using the
default "text/plain:charset=utf-8".
* Add primary clipboard support to wayclip
wayclip have had support for primary clipboard for some time now.
---------
Co-authored-by: Fredrik Foss-Indrehus <fred@ffoss.net>
- Normalise interface heredoc highlighting with that used for
:let-heredocs.
- Remove interface feature testing. The Lua and Python interface
command scripts are now highlighted by default. Loading all syntax
files incurs an undesirable load-time burden so highlighting of the
less popular MzScheme, Perl, Ruby and Tcl interfaces is disabled by
default. g:vimsyn_embed can still be used to customise the supported
interfaces.
- Always highlight interface ex-commands as valid commands, even when
the corresponding command-script highlighting is disabled.
- Highlight simple command-script statements as well as heredocs.
- Remove error highlighting of heredoc and statement command-script
regions when an interface is disabled. These are now highlighted as
plain text.
- Allow indented heredoc end tokens when "trim" is specified.
- Match interface heredocs in :def functions.
- Fix runaway vimEmbedError regions. These regions have been removed.
- Use python2 syntax for :python, and :pythonx when 'pyxversion' is
appropriately set.
closes: vim/vim#15522https://github.com/vim/vim/commit/a577e4289c3177309880592b85f225e487552f17
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Christian Clason