Problem: Using common name in tests leads to flaky tests.
Solution: Rename files and directories to be more specific.
3b0d70f4ff
This only includes test_cd.vim changes.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Cannot use relative paths as findfile() stop directories.
Solution: Change a relative path to an absolute path.
(zeertzjq)
related: vim/vim#15200closes: vim/vim#15202764526e279
Problem: Stop directory in findfile() doesn't work properly without a
trailing slash.
Solution: Always use fnamencmp(), not fnamecmp().
related: vim/vim#15200
related: vim/vim#15202e6ab23bd4a
Problem: Stop directory doesn't work properly in 'tags'.
(Jesse Pavel)
Solution: Also move the stop directory forward by one byte.
(zeertzjq)
This doesn't support relative stop directories yet, as they are not
supported in other places like findfile() either.
fixes: vim/vim#15200
related: vim/vim#1520268819afb2c
Problem: Using common name in tests leads to flaky tests.
Solution: Rename files and directories to be more specific.
3b0d70f4ff
This only includes test_findfile.vim changes.
vim-patch:9.1.0562: tests: inconsistency in test_findfile.vim
Problem: tests: inconsistency in test_findfile.vim, it saves and
restores 'shellslash', but doesn't actually set it
Solution: Set shellslash explicitly (zeertzjq)
closes: vim/vim#15217e7b98ab96e
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: fnamemodify('path/..', ':p') differs from using 'path/../'.
Solution: Include the "/.." in the directory name. (closesvim/vim#8808)
4eaef9979f
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: moving in the buffer list doesn't work as documented
(SenileFelineS)
Solution: Skip non-help buffers, when run from normal buffers, else
only move from help buffers to the next help buffer (LemonBoy)
As explained in the help section for :bnext and :bprev the commands
should jump from help buffers to help buffers (and from regular ones to
regular ones).
fixes: vim/vim#4478closes: vim/vim#15198893eeeb445
Co-authored-by: LemonBoy <thatlemon@gmail.com>
Problem: :bwipe doesn't remove file from jumplist and tagstack of other
tabpages. Time complexity of mark_forget_file() is O(n^2) when
removing all entries (after v9.1.0554)
Solution: Use FOR_ALL_TAB_WINDOWS(). Start the loops over the arrays
from the end instead of the start (zeertzjq)
closes: vim/vim#151992e7d89b398
Problem: filetype: htmlangular files are not properly detected
Solution: Use the new htmlangular filetype for angular files, because
since angular v17, those are no longer valid HTML files.
(Dennis van den Berg)
Since Angular 17, the new Control Flow Syntax is not valid HTML. This PR
adds a new filetype detection for the HTML templates of Angular.
It first checks the filename. The Angular convention is to use
*.component.html for the template. However, this is not mandatory.
If the filename does not match, it will check the contents of the file
if it contains:
- One of the Control-Flow blocks: @if, @for, @switch, @defer
- A structural directive: *ngIf, *ngFor, *ngSwitch, *ngTemplateOutlet
- Builtin Angular elements: ng-template or ng-content
- String interpolation: {{ something }}
This enables the Angular LSP to attach only to htmlangular filetypes, as
well as language parsers, such as tree-sitter.
closes: vim/vim#151901ad194c0df
Co-authored-by: Dennis van den Berg <dennis.vandenberg@nedap.com>
Problem: No test for antlr4 filetype
(after 9.1.0550)
Solution: Add a simple filename test
related: vim/vim#151918fc23bb8a4
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: :bw leaves jumplist and tagstack data around
(Paul "Joey" Clark)
Solution: Wipe jumplist and tagstack references to the wiped buffer
(LemonBoy)
As documented the :bwipeout command brutally deletes all the references
to the buffer, so let's make it delete all the entries in the jump list
and tag stack referring to the wiped-out buffer.
fixes: vim/vim#8201closes: vim/vim#151854ff3a9b1e3
Co-authored-by: LemonBoy <thatlemon@gmail.com>
Problem: No way to get the arity of a Vim function
(Austin Ziegler)
Solution: Enhance get() Vim script function to return the function
argument info using get(func, "arity") (LemonBoy)
fixes: vim/vim#15097closes: vim/vim#1510948b7d05a4f
Co-authored-by: LemonBoy <thatlemon@gmail.com>
Problem: Neovim bundles treesitter parsers for bash and python but does
not use them by default. This dilutes the messaging about the bundled
parsers being required for functionality or reasonable out-of-the-box
experience. It also increases the risk of query incompatibilities for no
gain.
Solution: Stop bundling bash and python parser and queries.
Problem: Behavior of CursorMovedC is strange.
Solution: Also trigger when the cmdline has changed.
(zeertzjq)
fixes: vim/vim#15069closes: vim/vim#150718145620a95
Problem: not possible to assign priority when defining a sign
(Mathias Fußenegger)
Solution: Add the priority argument for the :sign-define ex command and
the sign_define() function (LemonBoy)
Use the specified value instead of the default one (SIGN_DEF_PRIO) when
no priority is explicitly specified in sign_place or :sign place.
fixes: vim/vim#8334closes: vim/vim#15124b975ddfdf9
Co-authored-by: LemonBoy <thatlemon@gmail.com>
Problem: filetype: zone files are not recognized
(rpdprd)
Solution: Detect '*.zone' files as bindzone filetype
fixes: vim/vim#14222f095539b39
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: signed number detection for CTRL-X/A can be improved
(Chris Patuzzo)
Solution: Add the new "blank" value for the 'nrformat' setting. This
will make Vim assume a signed number only if there is a blank
in front of the sign.
(distobs)
fixes: vim/vim#15033closes: vim/vim#1511025ac6d67d9
Co-authored-by: distobs <cuppotatocake@gmail.com>
Problem: completion wrong with fuzzy when cycling back to original
(Quan Nguyen)
Solution: reset show_match_ok when cp_score is zero (glepnir)
fixes: vim/vim#15095closes: vim/vim#1510565407ce1d2
Co-authored-by: glepnir <glephunter@gmail.com>
Problem: the recursive parameter in the *_equal functions can be removed
Solution: Remove the recursive parameter in dict_equal(), list_equal()
object_equal and tv_equal(). Use a comparison of the static
var recursive_cnt == 0 to determine whether or not tv_equal()
has been called recursively (Yinzuo Jiang).
closes: vim/vim#150707ccd1a2e85
Co-authored-by: Yinzuo Jiang <jiangyinzuo@foxmail.com>
Problem: Cursor is moved to bottom of window trying to pagescroll when
already at the start of the buffer (Asheq Imran, after v9.1.0357)
Solution: Don't move cursor when buffer content did not move.
(Luuk van Baal)
8ccb89016e
Problem: Right release selects immediately when pum is truncated.
Solution: Use pum_height instead of pum_size when checking click row.
Don't place it above mouse row when there is more space below.
(zeertzjq)
fixes: vim/vim#15101closes: vim/vim#15102761a420c66
Problem: silent! causes following try/catch to not work
(Malcolm Rowe)
Solution: consider emsg_silent in handle_did_throw() and do not abort
evaluation flow for :silent! (LemonBoy)
The silent! flag causes the evaluation not to be aborted in case of
uncaught exceptions, adjust handle_did_throw to take this detail into
account.
Fixes the long-standing todo.txt item:
```
Problem that a previous silent ":throw" causes a following try/catch not
to work. (ZyX, 2013 Sep 28) With examples: (Malcolm Rowe, 2015 Dec 24)
Also see vim/vim#8487 for an example.
```
fixes: vim/vim#538closes: vim/vim#15128749ba0f6d9
Cherry-pick Test_deeply_nested_source() from patch 8.2.5169.
Co-authored-by: LemonBoy <thatlemon@gmail.com>
Problem:
Error when calling vim.treesitter.start() and vim.treesitter.stop() in
init.lua.
Solution:
Ensure syntaxset augroup exists after loading synload.vim.
Although the built-in pum completion mechanism will filter anyway on the
next input it is odd if the initial popup shows entries which don't
match the current prefix.
Using fuzzy match on the label/prefix is compatible with
`completeopt+=fuzzy` and also doesn't seem to break postfix snippet
cases
Closes https://github.com/neovim/neovim/issues/29287
This is a breaking change which will make refactor of typval and shada
code a lot easier. In particular, code that would use or check for
v:msgpack_types.binary in the wild would be broken. This appears to be
rarely used in existing plugins.
Also some cases where v:msgpack_type.string would be used to represent a
binary string of "string" type, we use a BLOB instead, which is
vimscripts native type for binary blobs, and already was used for BIN
formats when necessary.
msgpackdump(msgpackparse(data)) no longer preserves the distinction
of BIN and STR strings. This is very common behavior for
language-specific msgpack bindings. Nvim uses msgpack as a tool to
serialize its data. Nvim is not a tool to bit-perfectly manipulate
arbitrary msgpack data out in the wild.
The changed tests should indicate how behavior changes in various edge
cases.
Problem: need more tests for nested dicts and list comparison
Solution: Add tests for comparing deeply nested List/Dict values
(Yegappan Lakshmanan)
closes: vim/vim#1508188bbdb04c2
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: with a single `context.options` there is no way for user to
force which scope (local, global, both) is being temporarily set and
later restored.
Solution: replace single `options` context with `bo`, `go`, `wo`, and
`o`. Naming and implementation follows how options can be set directly
with `vim.*` (like `vim.bo`, etc.).
Options are set for possible target `win` or `buf` context.
Problem: `vim._with()` has many different use cases which are not
covered with tests.
Solution: cover with tests. Some (many) test cases are intentionally
marked as "pending" because they cover cases which don't work as
expected at the moment (and fixing them requires specific knowledge of
C codebase). Use them as a reference for future fixes.
Also some of "can be nested" tests currently might pass only because
the tested context doesn't work.
Instead of looping over all captured nodes, just take the end range from
the last node in the list. This uses the fact that nodes returned by
iter_matches are ordered by their range (earlier to later).
Problem: Treesitter highlighter clears the already populated highlight
state when performing spell checking while drawing a
smoothscrolled topline.
Solution: Save and restore the highlight state in the highlighter's
_on_spell_nav callback.
