Problem:
Some LSPs cause the following completion error (reformatted slightly):
Error executing vim.schedule lua callback:
.../runtime/lua/vim/lsp/completion.lua:373
attempt to index field 'range' (a nil value)
This is because an internal function assumes edits are either missing
or of type `TextEdit`, but there's a third [possibility][0] that's not
handled: the `InsertReplaceEdit`.
This was previously reported in at least two issues:
- https://github.com/neovim/neovim/issues/33142
- https://github.com/neovim/neovim/issues/33224
Solution:
Don't assume the edit is a `TextEdit`. This implicitly handles
`InsertReplaceEdit`s.
Also, add a test case for this, which previously caused an error.
[0]: 2c07428966/runtime/lua/vim/lsp/_meta/protocol.lua (L1099)
Problem:
Because the buffer in the window may change before the request is completed, foldclose() might be executed on the wrong buffer.
Solution:
Avoid that.
|vim.glob.to_lpeg()| uses a new LPeg-based implementation (Peglob) that
provides ~50% speedup for complex patterns. The implementation restores
support for nested braces and follows LSP 3.17 specification with
additional constraints for improved correctness and resistance to
backtracking edge cases.
- Fixed syntax highlighting for ksh93 namespace variables starting
with '${.'
- Added support for the alarm, eloop, fds, mkservice, pids, poll and
sha2sum builtins (which are indeed ksh93 builtins, albeit whether or
not they are available depends on the ksh release and the compiled
SHOPT options).
- Added support for the many Unix commands provided by ksh93's libcmd
as builtin commands (since these are general commands, scripts for
other shells like bash will also highlight these).
- The dumps for the sh_0{2,5,6,8,9}.sh were recreated due to this
change affecting commands those scripts call (e.g. 'wc').
- Enabled ${parameter/pattern/string} and friends for ksh syntax.
- Enabled case modification for ksh. See also:
https://github.com/ksh93/ksh/commit/c1762e03
- Enabled ;;& support for ksh. See also:
https://github.com/ksh93/ksh/commit/fc89d20a
- Added many special ksh variables using 93u+m's data/variables.c
as a reference.
If vim can't figure out which ksh release is in play using e.g.
the hashbang path, in such a case a generic default that enables
everything and the kitchen sink will be used. Otherwise, features will
be disabled if it's absolutely known a certain feature will not be
present. Examples:
- ERRNO is ksh88 specific, so that is locked to ksh88.
- Only 93u+m (assumed for generic) has SRANDOM, and only 93u+m
and 93v- have case modification support.
- 93u+ and 93v- have VPATH and CSWIDTH variables (the latter
is vestigal, but still present in the hardcoded variable table).
- 93v- and ksh2020 have (buggy and near unusable) implementations
of compgen and complete.
- Only mksh provides function substitutions, i.e. ${|command;}.
This took the better part of my day to implement. It seems to work well
enough though. (Also had to regenerate the dumps again while testing
it, as now there are dup scripts with mere hashbang differences, used
solely for testing syntax highlighting differences.)
closes: vim/vim#17348b0691b46bd
Co-authored-by: Johnothan King <johnothanking@protonmail.com>
Problem: A "search_cmd" message alters the message state (since 8e8f4523),
unnecessarily affecting logic for messages that follow.
Solution: Reset the appropriate variables after a "search_cmd" message.
Don't show "search_cmd" message with zero 'cmdheight'.
Problem:
- Lesson 7.3 (Cmdline Completion) teaches an important way to discover
Nvim features. I think users should learn it before they start
configuring Nvim
- Nvim can be configured in Lua as well, but lesson 7.2 (Configuring
Nvim) only mentions init.vim. And I think Nvim is promoting Lua more
Solution:
- Move lesson 7.2 to be after lesson 7.3
- Lesson 7.2 should teach about init.lua
Co-authored-by: Justin M. Keyes <justinkz@gmail.com>
The root_markers field can now contain a table of tables (as of
https://github.com/neovim/neovim/pull/33485) and :checkhealth will show
an error in that case since Lua cannot concatenate a table of tables.
Ensure that tables contain strings before concatenating and if not, fall
back to using vim.inspect().
Problem: The Github repo link in the Contribution section has been
archived for 5 years. So people who want to contribute to the
tutor plugin should just send PR to Vim repo, similar to most
other Vim features, so there is no need for a Contribution
section in the plugin doc.
Solution: Replace it with an Original Author note at the beginning of
the help document.
closes: vim/vim#173415a8f9958e2
Problem:
No way for a user to limit 'exrc' search in parent directories (compare
editorconfig.root).
Solution:
A configuration file can unset 'exrc', disabling the search for its
parent directories.
fix: set manwidth to not exceed the window width
If we set the MANWIDTH variable to a value wider than the window, the
contents wrap and formatting breaks. A more sensible way to handle this
is to interpret MANWIDTH as a maximum width, but to set the width to the
window size if smaller.
See also: #9023, #10748.
Problem:
The exrc file in the current directory is executed twice, here and in
`do_exrc_initalization()`.
Solution:
Start search from parent directory. Let core handle exrc in current
directory.
* Don't specify wayclip mimetype
Problem: Since wayclip 0.2, wayclip assumes UTF-8
(text/plain;charset=utf-8) in absence of an explicit mimetype.
Since Neovim sets the mimetype to "text/plain" without
specifying UTF-8, you will also have to use `-t text/plain`
when using waypaste or wayclip outside of Neovim.
Solution: Don't specify mimetype when using wayclip, thereby using the
default "text/plain:charset=utf-8".
* Add primary clipboard support to wayclip
wayclip have had support for primary clipboard for some time now.
---------
Co-authored-by: Fredrik Foss-Indrehus <fred@ffoss.net>
- Normalise interface heredoc highlighting with that used for
:let-heredocs.
- Remove interface feature testing. The Lua and Python interface
command scripts are now highlighted by default. Loading all syntax
files incurs an undesirable load-time burden so highlighting of the
less popular MzScheme, Perl, Ruby and Tcl interfaces is disabled by
default. g:vimsyn_embed can still be used to customise the supported
interfaces.
- Always highlight interface ex-commands as valid commands, even when
the corresponding command-script highlighting is disabled.
- Highlight simple command-script statements as well as heredocs.
- Remove error highlighting of heredoc and statement command-script
regions when an interface is disabled. These are now highlighted as
plain text.
- Allow indented heredoc end tokens when "trim" is specified.
- Match interface heredocs in :def functions.
- Fix runaway vimEmbedError regions. These regions have been removed.
- Use python2 syntax for :python, and :pythonx when 'pyxversion' is
appropriately set.
closes: vim/vim#15522a577e4289c
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
feat(logs): show full path of short_src in lsp logs
Problem:
- Cannot gf to info.short_src printed in the logs since only the last 16
characters are printed
Solution:
- Print full info.short_src and remove ...
Problem: <Tab> is not translated on the cmdline, and exposes a wrong
assumption in search messages that may contain multiple chunks.
Solution: Translate unprintable characters in the cmdline content.
Extract the 'search_count' from the last chunk and route
'search_cmd' to cmdline to handle multiple chunks.
Problem: The 'grepformat' option is global option, but it would be
useful to have it buffer-local, similar to 'errorformat' and
other quickfix related options (Dani Dickstein)
Solution: Add the necessary code to support global-local 'grepformat',
allowing different buffers to parse different grep output
formats (glepnir)
fixes: vim/vim#17316closes: vim/vim#173157b9eb6389d
Co-authored-by: glepnir <glephunter@gmail.com>
Previously the incorrect regexp forced title to be a single letter
because of using '+' instead of the '\+' regexp modifier.
closes: vim/vim#173211aa68dffbf
Co-authored-by: Alexander Abrosimov <alexander.n.abrosimov@gmail.com>
Problem: Incorrect message highlighting for highlighted message
chunks containing carriage returns.
Solution: Add a highlight for each substring ending in a newline or
carriage return separately.
Problem: Hint message to press "g<" for message that spills
'cmdheight' is too intrusive.
Solution: Remove the hint message. Document the meaning of the spill
indicator instead.
Problem: Carriage return should place the "write cursor" at the start of a line.
Solution: Construct the to be printed line by iterating over carriage returns.
Problem: Decision whether message is sent to "more" window is based on
the number of newlines present in a message, rather than the
actual text height.
With the "box" target, messages that come from a cmdline
entered command are not always routed to the more window.
Solution: Still write the message to the target buffer, and calculate
the actual text height. Postpone updating several state
variables until after the decision to re-route is made.
With the "box" target, only consider the text height of the
message if it is not a message from a cmdline entered command.
Problem: Extui shows a spill indicator to hint to the user to press "g<"
to show the output of the last command. The user may be
unaware of this mapping.
Solution: Route a hint message to the message "box" window.
Problem:
The scope `elseif $LC_MESSAGES =~ '\a\a' || $LC_MESSAGES ==# "C"` in
function `s:Locale` in file `runtime/autoload/tutor.vim` leaves a case
when l:lang is not defined.
Solution:
Define `l:lang` at function scope instead of `if` scope
Problem: still some problem with the new tutors filetype plugin
Solution: refactor code to enable/disable tutor mode into
tutor#EnableInteractive() function, include a test
(Phạm Bình An)
I find it annoying that Tutor's interactive mode is always on (or debug
mode is off) even when I open a tutor file with :edit command.
I think it makes more sense to make this "interactive mode":
- Always on when it is opened with :Tutor command
- Off otherwise
For more references, see `:help` feature, it is a much better than
:Tutor, since I don't have to run `:let g:help_debug = 1` just to be able
to edit and save a help file
Therefore, I remove `g:tutor_debug`
closes: vim/vim#1729913bea589a2
Co-authored-by: Phạm Bình An <phambinhanctb2004@gmail.com>
- Set g:tutor_debug on startup if it doesn't exist so that users can get
cmdline completion when interactively setting it.
- set b:undo_ftplugin in filetype plugin
- set default runtime file headers
closes: vim/vim#172743704b5b58a
Co-authored-by: Phạm Bình An <phambinhanctb2004@gmail.com>
feat(exrc): search exrc in parent directories
Problem:
`.nvim.lua` is only loaded from current directory, which is not flexible
when working from a subfolder of the project.
Solution:
Also search parent directories for configuration file.
=============== LIMITATIONS AND OBSERVATIONS ===============
* Remember that external-type names can only be found when
they match filenames resolvable in "&path" with "import"
declarations; load the source file of an external type to
look up its nested types and sibling top types, if any.
* Strive to narrow the search by assigning only relevant
pathnames for directories *or* an archive to "&path", e.g.
":set path-=/usr/include".
* Use "{Visual}gf" on fully-qualified names.
* Accept the fact that "&define" cannot contain end-of-line
characters (":help definition-search"). A declaration
whose matchable header is not contained within a line can
be found iff all of its non-optional components belong to
the same line; for types, such components are a keyword,
e.g. "class", followed by a run of blank characters and
an identifier, e.g. "Test"; for methods: a return type,
e.g. "String", or a keyword "void", followed by a run of
blank characters and an identifier, e.g. "toString", that
is followed by "(".
* The members of the "java.lang" package are usually not
associated with "import" declarations; to look up their
declarations, load a source file for a member of that
package, and then use, on a simple name of interest for
a member, either "[-Ctrl-d" etc. for local declarations
or "gf" for external declarations, assuming that "." *or*
the appropriate pathname for a JDK archive is assigned to
"&path".
* Follow the above instruction made for the "java.lang"
members for any type whose simple name is not associated
with an "import" declaration, i.e. a member type of the
same package that is declared in another compilation unit.
* Append the "$" character to "&iskeyword" when looking up
declarations of generated code.
See zzzyxwvut/java-vim#4.
closes: vim/vim#172817344024536
Co-authored-by: Aliaksei Budavei <0x000c70@gmail.com>
Co-authored-by: Konfekt <Konfekt@users.noreply.github.com>
Tag folding poses a few difficulties. Many elements, e.g.
"blockquote", are always delimited by start and end tags;
end tags for some elements, e.g. "p", can be omitted in
certain contexts; void elements, e.g. "hr", have no end tag.
Although the rules for supporting omissible end tags are
ad-hoc and involved, they apply to elements in scope.
Assuming syntactical wellformedness, an end tag can be
associated with its nearest matching start tag discoverable
in scope and towards the beginning of a file, whereas all
unbalanced tags and inlined tags can be disregarded.
For example:
------------------------------------------------------------
<!DOCTYPE html>
<html lang="en"> <!-- >1 : 1 -->
<body> <!-- >2 : 2 -->
<p>Paragraph vim/vim#1. <!-- = : 2 -->
<p> <!-- >3 : 3 -->
Paragraph vim/vim#2. <!-- = : 3 -->
</p> <!-- <3 : 3 -->
<p>Paragraph vim/vim#3.</p> <!-- = : 2 -->
</body> <!-- <2 : 2 -->
</html> <!-- <1 : 1 -->
------------------------------------------------------------
(HTML comments here, "<!-- ... -->", record two values for
each folded line that are separated by ":", a value obtained
from "&foldexpr" and a value obtained from "foldlevel()".)
Innermost foldedable tags will be flattened. For example:
------------------------------------------------------------
<!DOCTYPE html>
<html lang="en"> <!-- >1 : 1 -->
<body> <!-- >2 : 2 -->
<div class="block"> <!-- >3 : 3 -->
<pre><code> <!-- >4 : 4 -->
[CODE SNIPPET] <!-- = : 4 -->
</code></pre> <!-- <4 : 4 -->
</div> <!-- <3 : 3 -->
</body> <!-- <2 : 2 -->
</html> <!-- <1 : 1 -->
------------------------------------------------------------
No folding will be requested for the "<code>"-"</code>" tag
pair and reflected by "&foldexpr" because such a fold would
have claimed the same lines that the immediate fold of the
"<pre>"-"</pre>" tag already claims.
Run-on folded tags may confuse Vim. When a file such as:
------------------------------------------------------------
<!DOCTYPE html>
<html lang="en"> <!-- >1 : 1 -->
<body> <!-- >2 : 2 -->
<div class="block"> <!-- >3 : 3 -->
<pre> <!-- >4 : 4 -->
<code> <!-- >5 : 5 -->
[CODE SNIPPET vim/vim#1] <!-- = : 5 -->
</code> <!-- <5 : 5 -->
</pre> <!-- <4 : 4 -->
</div> <!-- <3 : 3 -->
<!-- = : 3 -->
<div class="block"> <!-- >3 : 3 -->
<pre> <!-- >4 : 4 -->
<code> <!-- >5 : 5 -->
[CODE SNIPPET vim/vim#2] <!-- = : 5 -->
</code> <!-- <5 : 5 -->
</pre> <!-- <4 : 4 -->
</div> <!-- <3 : 3 -->
</body> <!-- <2 : 2 -->
</html> <!-- <1 : 1 -->
------------------------------------------------------------
is reformatted as follows:
------------------------------------------------------------
<!DOCTYPE html>
<html lang="en"> <!-- >1 : 1 -->
<body> <!-- >2 : 2 -->
<div class="block"> <!-- >3 : 3 -->
<pre> <!-- >4 : 4 -->
<code> <!-- >5 : 5 -->
[CODE SNIPPET vim/vim#1] <!-- = : 5 -->
</code> <!-- <5 : 5 -->
</pre> <!-- <4 : 4 -->
</div><div class="block"><pre><code> <!-- <3 : 3 -->
[CODE SNIPPET vim/vim#2] <!-- = : 2 ? -->
</code> <!-- <5 : 2 ? -->
</pre> <!-- <4 : 2 ? -->
</div> <!-- <3 : 2 ? -->
</body> <!-- <2 : 2 -->
</html> <!-- <1 : 1 -->
------------------------------------------------------------
"&foldexpr" values will not be used as is for the lines
between (and including) "[CODE SNIPPET vim/vim#2]" and "</div>".
(Cf. v9.1.0002.)
Having syntax highlighting in effect, tag folding using the
"fold-expr" method can be enabled with:
------------------------------------------------------------
let g:html_expr_folding = 1
------------------------------------------------------------
By default, tag folding will be redone from scratch after
each occurrence of a TextChanged or an InsertLeave event.
Such frequency may not be desired, especially for large
files, and this recomputation can be disabled with:
------------------------------------------------------------
let g:html_expr_folding_without_recomputation = 1
doautocmd FileType
------------------------------------------------------------
To force another recomputation, do:
------------------------------------------------------------
unlet! b:foldsmap
normal zx
------------------------------------------------------------
References:
https://web.archive.org/web/20250328105626/https://html.spec.whatwg.org/multipage/syntax.html#optional-tagshttps://en.wikipedia.org/wiki/Dangling_elsecloses: vim/vim#17141dc7ed8f946
Co-authored-by: Aliaksei Budavei <0x000c70@gmail.com>
- Default to POSIX supported classes.
- Add a KornShell specific class list.
- Remove "or" from the Bash class list, presumably a typo.
closes: vim/vim#17293839b79eeb3
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
**Problem:** `LanguageTree:contains()` considers any range within the
start of the first tree and end of the last tree as "within" the
language tree. In the case of combined injections, this is problematic
because we only want to consider ranges within any of the combined trees
as "contained" (as opposed to any range within the entire range spanned
by all combined trees).
**Solution:** Use a more discriminative check in
`LanguageTree:contains()`.
