Problem: The "append" parameter added in abb40ece is missing from
history entries, resulting in different message formatting
for "g<".
Solution: Add "append" field to message history entries.
Co-authored-by: phanium <91544758+phanen@users.noreply.github.com>
Problem: Cmdline buffer is not cleared for a new message (since c973c7ae),
resulting in an incorrect spill indicator. When the cmdline
buffer is cleared, "msg_row" is not invalidated, resulting in
an error. The extui module is untested.
Return value of `vim.ui_attach()->callback` is undocumented.
Solution: Clear the cmdline buffer for the first message in an event
loop iteration. Ensure msg_row passed as end_row does not
exceed buffer length.
Add `messages_spec2.lua` to test the extui module, keeping in
mind that test coverage will greatly increase if this UI is made
the default. As such, only tests for specific extui functionality
unlikely to be covered by tests leveraging the current message grid.
Document the return value of `vim.ui_attach()->callback`, it seems
to make sense, and is also used to suppress remote UI events in
`messages_spec2.lua`.
This commit changes the `offset!` directive so that instead of setting a
`metadata.range` value for the entire pattern, it will set a
`metadata.offset` value. This offset will be applied to the range only
in `vim.treesitter.get_range()`, rather than at directive application
time. This allows the offset to be applied to any and all nodes captured
by the given pattern, and removes the requirement that `#offset!` be
applied to only a single node.
The downside of this change is that plugins which read from
`metadata.range` may be thrown off course, but such plugins should
prefer `vim.treesitter.get_range()` when retrieving ranges anyway.
Note that `#trim!` still sets `metadata.range`, and
`vim.treesitter.get_range()` still reads from `metadata.range`, if it
exists.
Replace direct function mappings with `<Plug>` mappings for cycling
through overloaded signatures, providing better customization options
for users. This change keeps the default mapping (`<C-s>`) for cycling
if `<Plug>(nvim.lsp.ctrl-s)` is not mapped.
Before this commit, I had trouble finding information about configuring
the insert mode completion. In particular, it was not clear that the
'wildopt' config that I already had in my vimrc does not apply here.
Also, `insert.txt` barely mentioned 'completeopt' except when
describing popups (I was more interested in bash-like behavior
where the unique prefix of all completions is completed first).
I'm hoping these edits will make the relevant docs easier to find.
closes: vim/vim#17515https://github.com/vim/vim/commit/053aee01f7374fc8c985300399b1ad3b3626e40f
Co-authored-by: Ilya Grigoriev <ilyagr@users.noreply.github.com>
Before, only the last capture's range would be counted for injection.
Now all captured ranges will be counted in the ranges array. This is
more intuitive, and also provides a nice solution/alternative to the
"scoped injections" issue.
Problem:
`vim.diagnostic.set()` doesn't actually accept a list of
`vim.Diagnostic` as internally `vim.diagnostic.set()` normalizes the
diagnostics and this normalization is assumed throughout the module.
Solution:
- Add a new type `vim.Diagnostic.Set` which is the input to `vim.diagnostic.set()`
- `col` is now an optional field and defaults to `0` to be consistent
with `vim.diagnostic.match()`.
- Change `table.insert(t, x)` to `table[#table + 1] = x` for improved
type checking.
Problem: CTRL-X CTRL-R only completes individual words from registers,
making it difficult to insert complete register content.
Solution: Add consecutive CTRL-X CTRL-R support - first press completes
words, second press completes full register lines, similar to
CTRL-X CTRL-L and CTRL-X CTRL-P behavior (glepnir).
closes: vim/vim#17395https://github.com/vim/vim/commit/d5fdfa5c9cf00790cf720e15c580a591a09fa906
Co-authored-by: glepnir <glephunter@gmail.com>
Problem: completion: not possible to limit number of matches
Solution: allow to limit the matches for 'complete' sources by using the
"{flag}^{limit}" notation (Girish Palya)
This change extends the 'complete' option to support limiting the
number of matches returned from individual completion sources.
**Rationale:** In large files, certain sources (such as the current
buffer) can generate an overwhelming number of matches, which may cause
more relevant results from other sources (e.g., LSP or tags) to be
pushed out of view. By specifying per-source match limits, the
completion menu remains balanced and diverse, improving visibility and
relevance of suggestions.
A caret (`^`) followed by a number can be appended to a source flag to
specify the maximum number of matches for that source. For example:
```
:set complete=.^9,w,u,t^5
```
In this configuration:
- The current buffer (`.`) will return up to 9 matches.
- The tag completion (`t`) will return up to 5 matches.
- Other sources (`w`, `u`) are not limited.
This feature is fully backward-compatible and does not affect behavior
when the `^count` suffix is not used.
The caret (`^`) was chosen as the delimiter because it is least likely
to appear in file names.
closes: vim/vim#17087https://github.com/vim/vim/commit/0ac1eb3555445f4c458c06cef7c411de1c8d1020
Cherry-pick test_options.vim change from patch 9.1.1325.
Co-authored-by: Girish Palya <girishji@gmail.com>
Problem: completion: cannot configure completion functions with
'complete'
Solution: add support for setting completion functions using the f and o
flag for 'complete' (Girish Palya)
This change adds two new values to the `'complete'` (`'cpt'`) option:
- `f` – invokes the function specified by the `'completefunc'` option
- `f{func}` – invokes a specific function `{func}` (can be a string or `Funcref`)
These new flags extend keyword completion behavior (e.g., via `<C-N>` /
`<C-P>`) by allowing function-based sources to participate in standard keyword
completion.
**Key behaviors:**
- Multiple `f{func}` values can be specified, and all will be called in order.
- Functions should follow the interface defined in `:help complete-functions`.
- When using `f{func}`, escaping is required for spaces (with `\`) and commas
(with `\\`) in `Funcref` names.
- If a function sets `'refresh'` to `'always'`, it will be re-invoked on every
change to the input text. Otherwise, Vim will attempt to reuse and filter
existing matches as the input changes, which matches the default behavior of
other completion sources.
- Matches are inserted at the keyword boundary for consistency with other completion methods.
- If finding matches is time-consuming, `complete_check()` can be used to
maintain responsiveness.
- Completion matches are gathered in the sequence defined by the `'cpt'`
option, preserving source priority.
This feature increases flexibility of standard completion mechanism and may
reduce the need for external completion plugins for many users.
**Examples:**
Complete matches from [LSP](https://github.com/yegappan/lsp) client. Notice the use of `refresh: always` and `function()`.
```vim
set cpt+=ffunction("g:LspCompletor"\\,\ [5]). # maxitems = 5
def! g:LspCompletor(maxitems: number, findstart: number, base: string): any
if findstart == 1
return g:LspOmniFunc(findstart, base)
endif
return {words: g:LspOmniFunc(findstart, base)->slice(0, maxitems), refresh: 'always'}
enddef
autocmd VimEnter * g:LspOptionsSet({ autoComplete: false, omniComplete: true })
```
Complete matches from `:iabbrev`.
```vim
set cpt+=fAbbrevCompletor
def! g:AbbrevCompletor(findstart: number, base: string): any
if findstart > 0
var prefix = getline('.')->strpart(0, col('.') - 1)->matchstr('\S\+$')
if prefix->empty()
return -2
endif
return col('.') - prefix->len() - 1
endif
var lines = execute('ia', 'silent!')
if lines =~? gettext('No abbreviation found')
return v:none # Suppresses warning message
endif
var items = []
for line in lines->split("\n")
var m = line->matchlist('\v^i\s+\zs(\S+)\s+(.*)$')
if m->len() > 2 && m[1]->stridx(base) == 0
items->add({ word: m[1], info: m[2], dup: 1 })
endif
endfor
return items->empty() ? v:none :
items->sort((v1, v2) => v1.word < v2.word ? -1 : v1.word ==# v2.word ? 0 : 1)
enddef
```
**Auto-completion:**
Vim's standard completion frequently checks for user input while searching for
new matches. It is responsive irrespective of file size. This makes it
well-suited for smooth auto-completion. You can try with above examples:
```vim
set cot=menuone,popup,noselect inf
autocmd TextChangedI * InsComplete()
def InsComplete()
if getcharstr(1) == '' && getline('.')->strpart(0, col('.') - 1) =~ '\k$'
SkipTextChangedIEvent()
feedkeys("\<c-n>", "n")
endif
enddef
inoremap <silent> <c-e> <c-r>=<SID>SkipTextChangedIEvent()<cr><c-e>
def SkipTextChangedIEvent(): string
# Suppress next event caused by <c-e> (or <c-n> when no matches found)
set eventignore+=TextChangedI
timer_start(1, (_) => {
set eventignore-=TextChangedI
})
return ''
enddef
```
closes: vim/vim#17065https://github.com/vim/vim/commit/cbe53191d01926c045a39198b3a9517e3c5077d2
Temporarily remove bufname completion with #if 0 to make merging easier.
Co-authored-by: Girish Palya <girishji@gmail.com>
Co-authored-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: glepnir <glephunter@gmail.com>
Problem:
Developing/troubleshooting plugins has friction because "restarting"
Nvim requires quitting and manually starting again. #32484
Solution:
- Implement a `:restart` command which emits `restart` UI event.
- Handle the `restart` UI event in the builtin TUI client: stop the
`nvim --embed` server, start a new one, and attach to it.
Complement the documented support for the recognition of all
public types of the "java.lang" package (":help java.vim").
(The original syntax item generator may have, inadvertently,
contributed via suppressing "NullPointerException"s to not
having annotation and interface types qualify in general.)
Also, re-link usage instructions for the alternative syntax
item generator to a rolling "master"'s version.
closes: vim/vim#17419https://github.com/vim/vim/commit/b577ad50d0fcc9588a73a93a64e7f34f4e74cdff
Co-authored-by: Aliaksei Budavei <0x000c70@gmail.com>
Problem: Non-visible/focusable windows are assigned a window number,
whereas commands that use this window number skip over them.
Solution: Skip over non-visible/focusable windows when computing
the window number, unless it is made the current window
through the API in which case an identifiable window number
is still useful. This also ensures it matches the window
number of the window entered by `<winnr>wincmd w` since
403fcacf.
Lewis Russell