`opts.plain=true` does not expand tildes in addition to environment
variables, unlike `opts.expand_env=false`.
`opts.expand_env=false` is soft-deprecated.
- Avoid shared state. Pass `focus` to set_pos()/expand_msg() instead of
a shared `pager_focus` flag: the flag is only cleared when set_pos()
actually enters the pager, so ":messages" from inside the pager left
it set.
- pager_shown(): the pager window is invalid after leaving it with "q".
- Reuse pager_shown() in expand_msg().
Problem: A message emitted while a previous expanded message is still
visible opens the pager and enters it, moving focus away from
the buffer window without an explicit request (#41061).
Solution: Only enter the pager when it was explicitly requested ("g<",
:messages, or entered from the expanded cmdline). An unfocused
pager is dismissed by the cmdline key handler, which stays armed
across the cmdline and no longer dismisses on non-typed keys
(#39221).
Problem:
During insert-mode / replace-mode, `autowrite` may trigger. If it does, the
cursor position can shift due to the automatic removal of trailing spaces on the
current line. When I resume typing, the space between the last word and the new
word is suddenly gone.
Solution:
Disable the "remove trailing spaces" handler during Insert (or a similar) mode.
Autosave logic is not affected.
Problem: Braces in C compound literals and initializers inside parentheses
and brackets are highlighted as errors.
Solution: Recognize those initializer blocks while preserving syntax recovery
for malformed parentheses.
fixes: vim/vim#18709closes: vim/vim#208425a1124e4f5
Co-authored-by: Bogdan Barbu <l4b.bogdan.barbu@gmail.com>
Problem:
Several subsystems need to derive a short, filesystem-safe identifier from an
arbitrary path, and each reinvents it ad-hoc:
- `'undodir'` and `swapfiles` encode the full path into a single filename, which
may exceed filesystem length-limits.
- `:connect ssh://` needs the SSH ControlPath socket name to stay under the
104-byte `sun_path` limit on macOS; today the path overflows it.
- the upcoming :terminal state dir.
- arbitrary plugin purposes.
Solution:
Provide `vim.fs.slug()`, which generates a bounded, one-way filename from an
arbitrary string. The input is normalized so equivalent paths produce the
same result. An 8-char hash is appended for uniqueness
Problem:
Buffer-local CWD (:bcd) is "sticky", similar to window-local CWD (:lcd).
But this contradicts one of its main benefits: per-buffer "project root"
for LSP, OSC7.
Other problems:
- A buffer created with :edit/:enew/:new silently inherits b_localdir
(and b_prevdir) from the previous buffer.
- curbuf_reusable() refuses to recycle a scratch buffer that has
`b_localdir`.
- After :new/:vnew/:tabnew the CWD sticks to previous buffer's
`b_localdir` even though the new curbuf has none, so :new is not
equivalent to ":split | enew", and getcwd() disagrees with
haslocaldir().
- Requires "which buffer spawned this buffer" semantics that no other
buffer-local state has.
Solution:
Drop sticky/inherit behavior of buffer-local CWD (:bcd).
- do_ecmd: always apply the new curbuf's dir (`fix_current_dir`), like
`do_autochdir` already does. :tabnew from a :bcd buffer now reverts to
global CWD (and fires DirChanged), same as :tabnew from a :lcd window.
- curbuf_reusable(): recycling a scratch buffer frees its b_localdir.
To get sticky/inherit behavior of CWD, use `:lcd`.
Problem:
No way to set a buffer-local directory.
Use-cases:
- "Root dir" for LSP (and the "project" concept).
- `:terminal` OSC 7
Solution:
Add `:bcd` command.
- Extend `getcwd()` to take a third arg; `getcwd(-1, -1, bunfr)` returns
the buffer-local working directory.
- Buffer-local directories have less priority than window-local
ones, and more priority than tab-local ones.
Co-authored-by: Justin M. Keyes <justinkz@gmail.com>
Problem:
By default, `nvim` does not survive if its host terminal dies. This is
inconvenient if you want to use Nvim as a "session manager" (like tmux).
Solution:
Let users opt-in to the "survive" behavior via `:detach!` (bang "!").
This marks the current UI as "detachable", so the server will not
self-exit if the UI channel closes.
Problem:
The default 'ruler' is implemented in C instead of the 'statusline' DSL.
Solution:
Replace the C implementation with a default 'rulerformat' expression.
This is a continuation of #1248 and #33036.
Advantages:
- configuration is more discoverable, the default being a useful example
- users and plugins can augment the default
- code reuse and less C code to maintain
- ui2: due to the use of an item group with `minwid`, it can expand
instead of truncating when the content gets too long, which is
particularly useful for locales with long translations of Top/Bot/All
Implementation details:
As is the case for 'statusline', when trying to set 'rulerformat' to an
empty string, the default expression is restored instead, mimicking how
previously the default C implementation would have been activated.
Just like before, `:set rulerformat=` and `:set rulerformat&` have the
same effect, and the ruler is disabled with `:set noruler`.
The default expression uses an item group with `%=`, unlike the fallback
in the previous default statusline `%-14.(%l,%c%V%) %P`, because the
total width and how it is configured is immediately clear without
documentation, it is a more useful pattern in general that works when
both sides have flexible width, and it also works for vim, which is
useful for configuration sharing/reuse.
A truncation marker `%<` is added at the end to mimic how at small
screen widths, the scroll percentage would disappear first, so that the
cursor position can remain fully visible.
BREAKING CHANGES:
- `&rulerformat` can no longer be set to an empty string
- ui2: the default ruler is no longer of fixed width, but can expand
- at very small screen widths (< 36 columns)
- ui2: it will no longer try to shrink white-space before truncating
- it truncates gradually from the right, whereas previously, the
scroll percentage would disappear all at once
- l10n can no longer add a space after the comma between line and column
(this was only done for one language: Ukrainian)
Problem:
Client:_get_registrations() errors if a documentSelector pattern is not
a valid glob (e.g. "**/**.dart" from dartls). The error discards
already-matched registrations and propagates to supports_method() and
the client/registerCapability handler, disabling capabilities unrelated
to the offending pattern.
Solution:
Skip invalid globs. Treat them as non-matching, and log once per client.
(Similar approach was taken for filewatcher globs: 4d9e5acfb5)
Problem: Traditionally, the ruler in the last line is one cell shorter
than in the statusline, leaving the last cell of the screen blank.
According to code comments, this is in order to prevent unwanted
scrolling on "some" (unspecified, but presumably ancient) terminals.
Berkeley vi is more specific in its `vs_modeline` function: dumb
terminals with hardware scroll, SunOS 4.1.1 and Ultrix 4.2 curses.
(n)curses still has a similar limitation in `(w)addstr`, but apparently
only for historical reasons.
Maintaining the different widths leads to awkward inconsistencies when
the ruler is configured with 'rulerformat', except for the special case
where it contains a top-level `%=`. Shifting the ruler in the last line
to the left would be a solution, but the empty cell at the end doesn't
seem to be relevant anymore.
Solution: extend the ruler in the last line all the way to the right
edge of the screen, just like in the statusline. The exact same amount
of place will be available to the rest of the UI as before.
BREAKING CHANGE:
- the default ruler width is now 18 cells
- the last cell of the screen is no longer empty
Closes#41076
Problem:
`zipfile://{archive}::{entry}` is ambiguous: `::` is legal in both an
archive path and an entry path, so the separator cannot be identified.
Splitting at the last `::` reads archives correctly but breaks entries
that contain it, and the plugin then emits buffer names it cannot read
back.
Solution:
Address entries as `zip://{archive}/{entry}`, joining the two paths.
Resolve the split by walking components: the first one that is a regular
file is the archive, because a regular file cannot have children on disk.
Entry paths may then contain any character, and no escaping is needed.
zipPlugin.vim keeps its own scheme, so the Java ftplugin emits whichever
form matches the active plugin until the legacy package is removed.
Problem:
Windows searches the current directory before $PATH, so opening an archive
in a directory that also contains an `unzip` executable runs that one. The
legacy plugin refused this; the port dropped the check.
Solution:
Refuse to run `unzip` when it resolves to the current directory.
Problem: An error raised after the list handler ran (e.g. while
rendering) unwinds through the pcall around provider.list()
and is routed back into the now no-op handler: silently
discarded.
Solution: Re-raise the error when the handler has already run.
Problem: A failed initial directory listing discards the listing state:
the user is left in an empty modifiable non-listing buffer, and
the BufEnter autocmd retries the failing open, repeating the
error on every re-entry.
Solution: Render the failure as an empty listing with state and handlers
intact: the error is reported once and "R" or :edit retries the
listing. Keep the error on the listing state so a failed
listing is distinguishable from an empty one; the next list
clears it.
Problem:
There is no health check. Encrypted entries cannot be read at all, since
Info-ZIP takes a password only from a terminal and `-P` would expose it
in the process arguments.
Solution:
Add `:checkhealth nvim.zip`, reporting the backend and which
implementation is handling archives. Prompt for the password on a pty,
extracting to a file so the entry's bytes stay off the terminal. Report
Info-ZIP's exit code rather than inferring a cause, so an archive using
AES is not reported as a failed decryption.
Problem:
Calling vim.treesitter.start() a second time on a buffer that already
has an active TSHighlighter creates a brand new instance instead of
reusing it, whether the parser tree is unchanged (e.g. calling start()
twice) or different (e.g. switching languages). Either way the old
instance is silently discarded without calling :destroy() on it, so
its on_bytes/on_changedtree/on_detach callbacks stay registered and
its buffer-local state (spelloptions, decoration namespace) is never
restored, both leaking indefinitely for an orphaned instance that
nothing references anymore.
Solution:
Return the existing instance when TSHighlighter.active[source] is
already set for the same parser tree, instead of unconditionally
constructing a new one. When the tree differs instead (e.g. a language
switch), destroy() the old instance first, matching stop() semantics,
before constructing the new one.
Problem: filetype: ed script files not recognised.
Solution: Add filetype detection for *.ed files and shebang lines,
include syntax script and syntax tests.
Features of the ed syntax file:
- BSD and GNU extensions are supported
- Andrew L. Moore's ed extensions are not supported
- Rebuild synmenu.vim
closes: vim/vim#19602c28515b999
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Adds optional parameters to `vim.fs.abspath`:
1. `cwd` to specify directory akin to `--relative-from` in `realpath(1)`.
2. `plain` disables expansion of tilde (~) in paths.
Problem:
Numerous callers have to manually check optval ownership (i.e. whether,
and how, to release) via `is_callback_option`, `option_is_global_local`,
etc. This is fragile, hard to use correctly; and if we introduce another
optval variant in the future, we'll have to redo all of these careful
checks and boilerplate again.
Solution:
Provide a unified system and use it everywhere:
optval_free_owned
optval_is_owned
optval_own
Problem:
Cannot assign Lua functions/closures to "func" ('completefunc',
'tagfun', …) or "expr" ('foldexpr', 'indentexpr', …) options.
Solution:
- Store "func"/"expr" options as `Callback` instead of string.
- Delete oceans of copy-pasted code.
- BREAKING: LuaRef returned via RPC/Vimscript is now represented as
`"<Lua N: file:line>"` (like what `:map` shows) instead of `nil`.
- Note: `man.vim` still uses `v:lua` string, bc it's a vimscript ftplugin.
Helped-by: Lewis Russell <lewis6991@gmail.com>
Problem: The zip autoload script aborts loading when the "zip"
command is not available, so even read-only browsing of an
archive fails with E117 (zip#Browse undefined) on systems
that have "unzip" but not "zip" (e.g. the Windows CI
runner). Regressed in b0e0b22.
Solution: Drop the load-time executable gate and check each command
per operation instead, so a missing "zip" only affects
writing. Update the test to match the reworded message.
e241ac0a62
Co-authored-by: Christian Brabandt <cb@256bit.org>
