Problem: not possible to anchor specific lines in diff mode
Solution: Add support for the anchoring lines in diff mode using the
'diffanchor' option (Yee Cheng Chin).
Adds support for anchoring specific lines to each other while viewing a
diff. While lines are anchored, they are guaranteed to be aligned to
each other in a diff view, allowing the user to control and inform the
diff algorithm what the desired alignment is. Internally, this is done
by splitting up the buffer at each anchor and run the diff algorithm on
each split section separately, and then merge the results back for a
logically consistent diff result.
To do this, add a new "diffanchors" option that takes a list of
`{address}`, and a new "diffopt" option value "anchor". Each address
specified will be an anchor, and the user can choose to use any type of
address, including marks, line numbers, or pattern search. Anchors are
sorted by line number in each file, and it's possible to have multiple
anchors on the same line (this is useful when doing multi-buffer diff).
Update documentation to provide examples.
This is similar to Git diff's `--anchored` flag. Other diff tools like
Meld/Araxis Merge also have similar features (called "synchronization
points" or "synchronization links"). We are not using Git/Xdiff's
`--anchored` implementation here because it has a very limited API
(it requires usage of the Patience algorithm, and can only anchor
unique lines that are the same across both files).
Because the user could anchor anywhere, diff anchors could result in
adjacent diff blocks (one block is directly touching another without a
gap), if there is a change right above the anchor point. We don't want
to merge these diff blocks because we want to line up the change at the
anchor. Adjacent diff blocks were first allowed when linematch was
added, but the existing code had a lot of branched paths where
line-matched diff blocks were handled differently. As a part of this
change, refactor them to have a more unified code path that is
generalized enough to handle adjacent diff blocks correctly and without
needing to carve in exceptions all over the place.
closes: vim/vim#176150d9160e11c
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem:
After 28b7c2d (found with bisect) the hover preview window does not
close when :edit'ing another file, even when you move the cursor.
Solution:
Change the BufLeave to target the original buffer, not the preview
buffer.
Problem:
Cannot use `nvim_open_term()` to pipe terminal scrollback > 100000
Solution:
Increase scrollback limit to 1000000
If there's no technical consequences of doing this, can be set even
higher in the future.
Problem:
Nvim depends on netrw to download/request URL contents.
Solution:
- Add `vim.net.request()` as a thin curl wrapper:
- Basic GET with --silent, --show-error, --fail, --location, --retry
- Optional `opts.outpath` to save to a file
- Operates asynchronously. Pass an `on_response` handler to get the result.
- Add integ tests (requires NVIM_TEST_INTEG to be set) to test success
and 404 failure.
- Health check for missing `curl`.
- Handle `:edit https://…` using `vim.net.request()`.
API Usage:
1. Asynchronous request:
vim.net.request('https://httpbingo.org/get', { retry = 2 }, function(err, response)
if err then
print('Fetch failed:', err)
else
print('Got body of length:', #response.body)
end
end)
2. Download to file:
vim.net.request('https://httpbingo.org/get', { outpath = 'out_async.txt' }, function(err)
if err then print('Error:', err) end
end)
3. Remote :edit integration (in runtime/plugin/net.lua) fetches into buffer:
:edit https://httpbingo.org/get
Problem:
- util._refresh() is only used by `inlay_hint.lua` and `document_color.lua`, and
both have their own wrapper functions;
- util._refresh() provides unified parameters, but this layer of wrapping is
almost meaningless because
- document color does not need the range parameter;
- inlay hint requires a range parameter, but it is not complicated
Therefore, it can be considered redundant.
ref https://github.com/neovim/neovim/pull/32887#discussion_r1996413602
Solution:
Remove it.
Problem:
The "gitsigns" plugin runs `vim.diff` in a thread (`uv.new_work`), but
`vim.diff` is nil in that context:
Lua callback:
…/gitsigns.nvim/lua/gitsigns/diff_int.lua:30: bad argument #1 to 'decode' (string expected, got nil)
stack traceback:
[C]: in function 'decode'
…/gitsigns.nvim/lua/gitsigns/diff_int.lua:30: in function <…/gitsigns.nvim/lua/gitsigns/diff_int.lua:29>
Luv thread:
…/gitsigns.nvim/lua/gitsigns/diff_int.lua:63: attempt to call field 'diff' (a nil value)
Solution:
Revert the `stdlib.c` change (set `vim.diff` instead of `vim._diff`).
Problem:
Calling lsp.codelens.refresh() causes transient visual flicker because
codelens virtual texts are briefly replaced with "Unresolved lens ..."
before being resolved and redrawn. Since refresh() is triggered
frequently (e.g., on CursorHold or InsertLeave), this leads to redundant
and noisy virtual text updates, even when the final text hasn't changed.
Solution:
Do not update virtual text for a line if some lenses for that line are
not resolved yet.
A trade-off is that the user may temporarily see outdated virtual text.
However, that's preferable to spamming updates on every refresh.
Problem:
Bad format() call on PUC Lua #34901
Error: Failed to run healthcheck for "vim.health" plugin. Exception:
runtime/lua/vim/health/health.lua:89: bad argument #1 to 'format' (string expected, got nil)
Solution:
Avoid passing nil.
Problem: When message is moved from message window to cmdline,
the cmdline highlighter is not disabled.
Solution: Disable the highlighter (and only scroll to bottom when
message was moved to pager).
Problem: tests: string options in gen_opt_test.vim aren't fully sorted.
Solution: Sort the string options alphabetically. Also make description
of 'maxsearchcount' start with lower-case for consistency with
other options, update documentation for searchcount().
closes: vim/vim#177207306e8fcdb
Problem: The maximum search count uses a hard-coded value of 99
(Andres Monge, Joschua Kesper)
Solution: Make it configurable using the 'maxsearchcount' option.
related: vim/vim#8855fixes: vim/vim#17527closes: vim/vim#17695b7b7fa04bf
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Storing the configured 'cmdheight' value is scheduled and
may happen after cmdline2_spec already entered block_mode.
Excessive wait time for expected screen state due to delayed
ruler after an error message.
Solution: Only schedule storing the user configured 'cmdheight' if
v:vim_did_enter is unset. Use regular message instead of error.
This commit allows users to jump to the location specified in a
diagnostic's `relatedInformation`, using `gf` from within the
`open_float` window. The cursor need only be on line that displays the
related info.
fixes: vim/vim#17474closes: vim/vim#1768332a1b26ef3
vim-patch:41ee98c: runtime(filetype): fix incorrect pattern and break early
- Using `\n` is incorrect, as result of getline() does not contain line
breaks and only uses `\n` for NUL bytes.
- Return when b:asmsyntax is set, like many other filetypes.
closes: vim/vim#1770641ee98c3c5
Co-authored-by: Wu Yongwei <wuyongwei@gmail.com>
Problem: winborder option only supported predefined styles and lacked support for custom border characters.
Solution: implement parsing for comma-separated list format that allows specifying 8 individual border characters (topleft, top, topright, right, botright, bottom, botleft, left).
Problem: The message window is essentially a regular floating window
but does not use 'winborder'.
Still some "scratch" buffer options unset after it was removed
from its window.
Solution: Do not set the border when opening the window message.
Forego passing `scratch = true` when opening a buffer,
set the options manually when necessary.
Co-authored-by: Luuk van Baal <luukvbaal@gmail.com>
Problem: An accidental key press can dismiss a routed message to be
shown in full before the user was able to read it.
'verbose' message routing based on an outdated condition results
in "last_set" messages being separated from its message pair.
Solution: Show a message to be shown in full in the cmdline window instead
of the pager. Keep it there and update the spill indicator when
the message is dismissed.
Remove the 'verbose' message routing.
Problem: completion: search completion match may differ in case
(techntools)
Solution: add "exacttext" to 'wildoptions' value (Girish Palya)
This flag does the following:
exacttext
When this flag is present, search pattern completion
(e.g., in |/|, |?|, |:s|, |:g|, |:v|, and |:vim|)
shows exact buffer text as menu items, without
preserving regex artifacts like position
anchors (e.g., |/\<|). This provides more intuitive
menu items that match the actual buffer text. However,
searches may be less accurate since the pattern is not
preserved exactly.
By default, Vim preserves the typed pattern (with
anchors) and appends the matched word. This preserves
search correctness, especially when using regular
expressions or with 'smartcase' enabled. However, the
case of the appended matched word may not exactly
match the case of the word in the buffer.
fixes: vim/vim#17654closes: vim/vim#1766793c2d5bf7f
Co-authored-by: Girish Palya <girishji@gmail.com>
Problem:
- Running `:h :EditQuery` throws error `E149: Sorry, no help for
:EditQuery`
- vim_diff.txt miss an entry for `:EditQuery`
Solution:
- Make tag `[:EditQuery]()` right-aligned, similar to command `:Open`
- Update vim_diff.txt
Problem: Health check floating window gets closed when pressing 'gO' to show TOC because LSP floating preview system auto-closes on BufEnter events triggered by :lopen.
Solution: Temporarily disable BufEnter event for the current window during TOC operations and adjust window layout to prevent overlap.
Problem: filetype: autopkgtest files are not recognized
Solution: detect */debian/tests/control files as autopkgtest filetype
(James McCoy)
Autopkgtest is a Debian tool for testing installed versions of packages
when other, related packages are updated.
Reference:
- https://www.debian.org/doc/debian-policy/autopkgtest.txt
related: vim/vim#176795bcc492649
Co-authored-by: James McCoy <jamessan@jamessan.com>
Problem:
Closes#31453
Solution:
Introduce `vim.lsp.Capability`, which may serve as the base class for
all LSP features that require caching data. it
- was created if there is at least one client that supports the specific method;
- was destroyed if all clients that support the method were detached.
- Apply the refactor for `folding_range.lua` and `semantic_tokens.lua`.
- Show active features in :checkhealth.
Future:
I found that these features that are expected to be refactored by
`vim.lsp.Capability` have one characteristic in common: they all send
LSP requests once the document is modified. The following code is
different, but they are all for this purpose.
- semantic tokens:
fb8dba413f/runtime/lua/vim/lsp/semantic_tokens.lua (L192-L198)
- inlay hints, folding ranges, document color
fb8dba413f/runtime/lua/vim/lsp/inlay_hint.lua (L250-L266)
I think I can sum up this characteristic as the need to keep certain
data synchronized with the latest version computed by the server.
I believe we can handle this at the `vim.lsp.Capability` level, and
I think it will be very useful.
Therefore, my next step is to implement LSP request sending and data
synchronization on `vim.lsp.Capability`, rather than limiting it to the
current create/destroy data approach.
Problem: getcompletiontype() crashes when no completion is available
(after v9.1.1509).
Solution: Don't call set_expand_context() (zeertzjq)
fixes: vim/vim#17681closes: vim/vim#17684e2c0f81dd0
Problem:
Error when adding a plugin will make all following plugins not
`:packadd`ed
Solution:
- add() should handle errors from :packadd with pcall()
Co-authored-by: Evgeni Chasnovski <evgeni.chasnovski@gmail.com>
Co-authored-by: Justin M. Keyes <justinkz@gmail.com>
Problem: Patch 9.1.1505 was not good
Solution: Revert "patch 9.1.1505: not possible to return completion type
for :ex command" and instead add the getcompletiontype()
function (Hirohito Higashi).
related: vim/vim#17606closes: vim/vim#1766296b3ef2389
Cherry-pick Test_multibyte_expression() from Vim, as it passes.
Co-authored-by: Hirohito Higashi <h.east.727@gmail.com>
Co-authored-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Problem: not possible to return command-line completion type for :ex
command
Solution: make getcmdcompltype() accept an optional and return the
command-line completion for that arg (Shougo Matsushita).
closes: vim/vim#176065d2354fc07
Co-authored-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Problem: completion: can only complete from keyword characters
Solution: remove this restriction, allow completion functions when
called from i_CTRL-N/i_CTRL-P to be triggered from non-keyword
characters (Girish Palya)
Previously, functions specified in the `'complete'` option were
restricted to starting completion only from keyword characters (as
introduced in PR 17065). This change removes that restriction.
With this change, user-defined functions (e.g., `omnifunc`, `userfunc`)
used in `'complete'` can now initiate completion even when triggered
from non-keyword characters. This makes it easier to reuse existing
functions alongside other sources without having to consider whether the
cursor is on a keyword or non-keyword character, or worry about where
the replacement should begin (i.e., the `findstart=1` return value).
The logic for both the “collection” and “filtering” phases now fully
respects each source’s specified start column. This also extends to
fuzzy matching, making completions more predictable.
Internally, this builds on previously merged infrastructure that tracks
per-source metadata. This PR focuses on applying that metadata to
compute the leader string and insertion text appropriately for each
match.
Also, a memory corruption has been fixed in prepare_cpt_compl_funcs().
closes: vim/vim#17651ba11e78f1d
Co-authored-by: Girish Palya <girishji@gmail.com>
