Problem: tests: no test for actually moving cursor when menu is not
open with 'autocompletedelay'.
Solution: Use <Up> first in the test. Also remove two unnecessary <Esc>s
in completion timeout test (zeertzjq).
closes: vim/vim#18097e8b99ff6d5
Problem: vim-tiny fails on CTRL-X/CTRL-A
(Rob Foehl, after 9.1.0172)
Solution: Move #ifdefs, so that after changing the line in del_bytes,
the cached textlen value is invalidated
closes: vim/vim#1517803acd4761b
Co-authored-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: completion: not possible to delay the autcompletion
Solution: add the 'autocompletedelay' option value (Girish Palya).
This patch introduces a new global option 'autocompletedelay'/'acl' that
specifies the delay, in milliseconds, before the autocomplete menu
appears after typing.
When set to a non-zero value, Vim waits for the specified time before
showing the completion popup, allowing users to reduce distraction from
rapid suggestion pop-ups or to fine-tune the responsiveness of
completion.
The default value is 0, which preserves the current immediate-popup
behavior.
closes: vim/vim#17960a09b1604d4
N/A patch: vim-patch:9.1.1641: a few compiler warnings are output
Co-authored-by: Girish Palya <girishji@gmail.com>
Problem:
with `foldmethod=expr foldexpr=v:lua.vim.treesitter.foldexpr()
foldminlines=0`, deleting lines at the end of the buffer always
reports an invalid top error, because the top value (i.e. the
start line number of the deletion) is always 1 greater than
the total line number of the modified buffer.
Solution:
remove the ml_line_count validation
Problem:
The load function in opts was difficult to use if you wished to
customize based on the plugin being loaded.
You could get the name, but without some way to mark a spec, that was of
limited usefulness unless you wanted to hardcode a list of names in the
function, or write a wrapper around the whole thing
Solution:
Allow users to provide an arbitrary data field in plugin specs so that
they may receive info as to how to handle that plugin in load, get() and
events, and act upon it
Co-authored-by: BirdeeHub <birdee@localhost>
Co-authored-by: Evgeni Chasnovski <evgeni.chasnovski@gmail.com>
Problem: Unable to see e.g. `inputlist()` prompts that exceed the dialog
window height.
Multi-line prompts are not handled properly, and tracking
is insufficient for messages in cmdline_block mode.
Solution: Add vim.on_key handler while the dialog window is open that
forwards paging keys to the window.
Properly render multi-line prompts. Keep track of both the start
and end of the current cmdline prompt. Append messages after the
current prompt in cmdline_block mode.
Problem:
Running `echo dummy | nvim file1 file2` closes the file1 buffer if
file1 doesn't exist.
Solution:
Logic changed in 43e8ec9 such that stdin buffer may now be created *after*
file args. Handle that case.
Problem: Wrong event order for nested cmdline in a conditional cmdline_block.
Solution: Emit all but the first cmdline_block event immediately after
getting the next command, before executing it.
Problem: many FileType autocommands assume curbuf is the same as the target
buffer; this can cause &syntax to be restored for the wrong buffer in some cases
when TSHighlighter:destroy is called.
Solution: run nvim_exec_autocmds in the context of the target buffer via
nvim_buf_call.
Problem: on_detach may be called after buf_freeall and other important things,
plus its textlock restrictions are insufficient. This can cause issues such as
leaks, internal errors and crashes.
Solution: disable buffer updates in buf_freeall, before autocommands (like the
order after #35355 and when do_ecmd reloads a buffer). Don't do so in
free_buffer_stuff; it's not safe to run user code there, and buf_freeall already
runs before then; just free them to avoid leaks if buf_freeall autocommands
registered more for some reason.
Fixes#28084Fixes#33967Fixes#35116
Problem:
Buffer-updates on_detach callback is invoked before buf_freeall(), which
deletes autocmds of the buffer (via apply_autocmds(EVENT_BUFWIPEOUT,
...)). Due to this, buffer-local autocmds executed in on_detach (e.g.,
LspDetach) are not actually invoked.
Solution:
Call buf_updates_unload() before buf_freeall().
Problem: Unicode has deprecated some code-points
Solution: Update the digraph tables to align with the Unicode v16
release (David Friant)
This commit updates the digraphs Left-Pointing Angle Bracket '</'
and Right-Pointing Angle Bracket '/>' to account for the fact that
the old Unicode codepoints for them (2329 and 232A, respectively)
have been deprecated. As per the Miscellaneous Technical code chart
(https://www.unicode.org/charts/PDF/U2300.pdf), the old digraphs
have been reassigned to the CJK Left Angle Bracket and Right Angle
Bracket (3008 and 3009) with their declaration moved to the
appropriate block.
This commit also introduces the new digraphs '<[' and ']>' to
represent the Mathematical Left Angle Bracket and Mathematical
Right Angle Bracket (27E8 and 27E9) to replace the deprecated code
points in the Technical block.
Tests have been added and, I believe, the documentation has been
updated accordingly.
closes: vim/vim#17990c08b94b072
Co-authored-by: David Friant <friant@HPEnvyx360.friant.dev>
Problem: parse_cmdline() sets eap->cmdlinep to address of local parameter,
causing invalid memory access when expand_filename() tries to modify it.
This leads to crashes when typing '%' in user commands with preview=true
and complete=file.
Solution: Change parse_cmdline() signature to accept char **cmdline,
allowing cmdlinep to point to caller's variable for safe reallocation.
Problem:
During preview, the `input` still prompts the user to enter something
that won't be used later, which could be a bit confusing.
e.g., `:s/a/\=input("")`.
Solution:
Make the input() return early during 'inccommand' preview.
Problem: Temporary cmdline config is saved to be restored later.
Solution: Close the cmdline window so that it is recreated with the appropriate config.
Problem: Ctrl-G/Ctrl-T does not ignore the end search delimiter
(irisjae)
Solution: Check if the pattern ends with a search delimiter and ignore
it, unless it is part of the pattern.
fixes: vim/vim#17895closes: vim/vim#17933c03990d30f
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: No way to skip install confirmation in `add()`. Having install
confirmation by default is a more secure design. However, users are
usually aware of the fact that plugin will be installed and there is
currently no way to skip confirmation.
Plus it can introduce inconvenience on the clean config initialization
if it is modularized with many `vim.pack.add()` calls (leads to
confirming installation many times in a row).
Solution: Add `opts.confirm` option that can skip install confirmation.
Problem: No way to have full control over how plugin is loaded.
Although `:packadd!` has small side effects (only adds plugin
directory to 'runtimepath'; and maybe its 'after/' subdirectory), it
still has side effects. For example, 'plugin/' directories are still
loaded during startup (as part of `:h load-plugins`).
Solution: Allow function `opts.load` that has full control over how
plugin is loaded.
Problem: the `load=true` in `vim.pack.add()` means that `:packadd` is
executed even during startup. This leads to force source of 'plugin/',
which breaks the intended loading order (`:h load-plugins`) and
results into sourcing them twice. This also makes it ignore
`--noplugin` argument.
Using `:packadd!` during startup is more appropriate, while `:packadd`
afterwards is still more favorable to actually force 'plugin/' source
(as there is no pre-defined mechanism that will load them later).
Solution: have `load=false` default during startup, `true` - afterwards.
Problem: completion: incsearch highlight might be lost after search
completion (Hirohito Higashi)
Solution: Restore incsearch highlight after dismissing pum with Ctrl-E
(Girish Palya)
related: vim/vim#17870closes: vim/vim#1789104c9e78cd3
This change actually isn't needed as Nvim doesn't call update_screen()
to redraw pum, but it doesn't hurt either.
Co-authored-by: Girish Palya <girishji@gmail.com>
Problem: tests: Test_search_wildmenu_iminsert() depends on help file
(after 9.1.1594).
Solution: Set buffer text using setline() instead of loading help file.
Add a test for another bug fixed by 9.1.1594 (zeertzjq).
related: vim/vim#17870closes: vim/vim#17922615ad4ced1
- Add delimiter between function signature and documentation, matching hover formatting
- Show title only if there are multiple clients or multiple signatures
- Avoid duplicating the title inside the window if it's already shown in the border
Problem: make_floating_popup_options only shows when opts.border is explicitly set, ignoring global winborder setting
Solution: check both opts.border and vim.o.winborder when determining whether to show title
The cursor movement autocommand can not detect when the final tabstop $0
is directly adjacent to another tabstop, which prevents ending the
snippet session. The fix is an early return when jumping.
