Problem: Decoding of mouse click escape sequence is not tested.
Solution: Add a test for xterm and SGR using low-level input. Make
low-level input execution with feedkeys() work.
905dd905de
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: ml_delete() often called with FALSE argument.
Solution: Use ml_delete_flags(x, ML_DEL_MESSAGE) when argument is TRUE.
ca70c07b72
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Wrong event order for nested cmdline in a conditional cmdline_block.
Solution: Emit all but the first cmdline_block event immediately after
getting the next command, before executing it.
These are not needed after #35129 but making uncrustify still play nice
with them was a bit tricky.
Unfortunately `uncrustify --update-config-with-doc` breaks strings
with backslashes. This issue has been reported upstream,
and in the meanwhile auto-update on every single run has been disabled.
Problem: Autocompletion slow with include- and tag-completion
Solution: Refactor ins_compl_interrupted() to also check for timeout,
further refactor code to skip outputting message when
performing autocompletion (Girish Palya).
Running `vim *` in `vim/src` was slower than expected when
'autocomplete' was enabled. Include-file and tag-file completion
sources were not subject to the timeout check, causing unnecessary
delays.
So apply the timeout check to these sources as well, improving
autocompletion responsiveness, refactor find_pattern_in_path() to take
an additional "silent" argument, to suppress any messages.
closes: vim/vim#1796659e1d7f353
Co-authored-by: Girish Palya <girishji@gmail.com>
Problem: parse_cmdline() sets eap->cmdlinep to address of local parameter,
causing invalid memory access when expand_filename() tries to modify it.
This leads to crashes when typing '%' in user commands with preview=true
and complete=file.
Solution: Change parse_cmdline() signature to accept char **cmdline,
allowing cmdlinep to point to caller's variable for safe reallocation.
Problem: The :keep{alt,jumps,marks,patterns} commmands are sometimes
misidentified as :k.
Solution: Make sure one_letter_cmd() only returns true for :k and not
other :keep* commands (Doug Kearns).
This currently manifests as missing completion for :keep* commands and
incorrect results from fullcommand().
E.g., fullcommand("keepmarks") returns "k" rather than "keepmarks".
The correct command, however, is executed as command modifiers are
handled specially in do_one_cmd() rather than using find_ex_command().
Fix exists(':k') so that it returns 2 for a full match.
closes: vim/vim#15742ea84202372
Cherry-pick Test_ex_command_completion() from patch 9.1.0624.
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Platform specific options are cringe and should either be fixed or
deleted.
In this case, the platform difference can trivially be implemented
using a conditional default value. If the user overrides the value,
then it is because the user wants that value, regardless of the
corporation who manufactured the OS that the user is running.
Possible alternative: delete the option by making it always on.
Problem:
Not easy for a user to tell ":restart" to "run this command(s) after restarting".
Solution:
All ":restart" args following the optional +cmd arg are treated as a big cmdline that is passed as a "-c" CLI arg when restarting nvim.
Problem:
":restart" always executes ":qall" to exit the server.
Solution:
Support ":restart +cmd" so the user can control the command
used to exit the server.
Co-authored-by: Justin M. Keyes <justinkz@gmail.com>
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: No check for closing the only non-floating window in a non-current
tabpage that contains floats. This can lead to a tabpage that contains only
floats, causing crashes.
Solution: Copy the relevant check from win_close to win_close_othertab. Fix some
uncovered issues.
Closes#34943Fixes#31236
Co-authored-by: glepnir <glephunter@gmail.com>
Problem: not possible to anchor specific lines in diff mode
Solution: Add support for the anchoring lines in diff mode using the
'diffanchor' option (Yee Cheng Chin).
Adds support for anchoring specific lines to each other while viewing a
diff. While lines are anchored, they are guaranteed to be aligned to
each other in a diff view, allowing the user to control and inform the
diff algorithm what the desired alignment is. Internally, this is done
by splitting up the buffer at each anchor and run the diff algorithm on
each split section separately, and then merge the results back for a
logically consistent diff result.
To do this, add a new "diffanchors" option that takes a list of
`{address}`, and a new "diffopt" option value "anchor". Each address
specified will be an anchor, and the user can choose to use any type of
address, including marks, line numbers, or pattern search. Anchors are
sorted by line number in each file, and it's possible to have multiple
anchors on the same line (this is useful when doing multi-buffer diff).
Update documentation to provide examples.
This is similar to Git diff's `--anchored` flag. Other diff tools like
Meld/Araxis Merge also have similar features (called "synchronization
points" or "synchronization links"). We are not using Git/Xdiff's
`--anchored` implementation here because it has a very limited API
(it requires usage of the Patience algorithm, and can only anchor
unique lines that are the same across both files).
Because the user could anchor anywhere, diff anchors could result in
adjacent diff blocks (one block is directly touching another without a
gap), if there is a change right above the anchor point. We don't want
to merge these diff blocks because we want to line up the change at the
anchor. Adjacent diff blocks were first allowed when linematch was
added, but the existing code had a lot of branched paths where
line-matched diff blocks were handled differently. As a part of this
change, refactor them to have a more unified code path that is
generalized enough to handle adjacent diff blocks correctly and without
needing to carve in exceptions all over the place.
closes: vim/vim#176150d9160e11c
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: File paths change from symlink to target path after :cd command
when editing files through symbolic links
Solution: Add "~" flag to 'cpoptions' to control symlink resolution.
When not included (default), symlinks are resolved maintaining
backward compatibility. When included, symlinks are preserved
providing the improved behavior. (glepnir)
related: neovim/neovim#15695closes: vim/vim#176284ade668fb6
Problem: inconsistent range arg for :diffget/diffput
Solution: fix the range specification, place the cursor for :diffput and
:diffget consistently on the last line (Yee Cheng Chin)
Previously, `:<range>diffget` only allowed using 1 or above in the range
value, making it impossible to use the command for a diff block at the
beginning of the file. Fix the range specification so the user can now
use 0 to specify the space before the first line. This allows
`:0,$+1diffget` to work to retrieve all the changes from the other file
instead of missing the first diff block. Also do this for `:diffput`.
Also, make `:diffput` work more similar to `:diffget`. Make it so that
if the cursor is on the last line and a new line is inserted in the
other file, doing `:diffput` will select that diff block below the line,
just like `:diffget` would.
Also clean up the logic a little bit for edge cases and for handling
line matched diff blocks better.
closes: vim/vim#17579d75ab0cbf5
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: nvim_parse_cmd() incorrectly splits mapping commands like
into three arguments instead of preserving whitespace in the RHS.
Solution: Add special handling for mapping commands to parse them as exactly
two arguments - the LHS and the RHS with all whitespace preserved.
Uses the undocumented "error_exit" UI event for a different purpose:
When :detach is used on the server, send an "error_exit" with 0 `status`
to indicate that the server shouldn't wait for client exit.
Problem:
Developing/troubleshooting plugins has friction because "restarting"
Nvim requires quitting and manually starting again. #32484
Solution:
- Implement a `:restart` command which emits `restart` UI event.
- Handle the `restart` UI event in the builtin TUI client: stop the
`nvim --embed` server, start a new one, and attach to it.
Problem: Missing kind and separate event for each line for message
containing buffer lines for e.g. `:print`.
Solution: Set the `list_cmd` kind and only `msg_start()` for the first
message, print a newline instead.
Problem:
vim.uv.os_setenv gets "stuck" per-key. #32550
Caused by the internal `envmap` cache. #7920
:echo $FOO <-- prints nothing
:lua vim.uv.os_setenv("FOO", "bar")
:echo $FOO <-- prints bar (as expected)
:lua vim.uv.os_setenv("FOO", "fizz")
:echo $FOO <-- prints bar, still (not expected. Should be "fizz")
:lua vim.uv.os_unsetenv("FOO")
:echo $FOO <-- prints bar, still (not expected. Should be nothing)
:lua vim.uv.os_setenv("FOO", "buzz")
:echo $FOO <-- prints bar, still (not expected. Should be "buzz")
Solution:
- Remove the `envmap` cache.
- Callers to `os_getenv` must free the result.
- Update all call-sites.
- Introduce `os_getenv_noalloc`.
- Extend `os_env_exists()` the `nonempty` parameter.
Problem: An ext_cmdline block event that should be empty after :<CR>
re-emits the previous cmdline.
Solution: Clear `last_cmdline` even when `new_last_cmdline == NULL`.
Problem: Message kind logic for emitting an error message is convoluted
and still results in emitting an unfinished message earlier than
wanted.
Solution: Ensure emsg_multiline() always sets the kind wanted by the caller
and doesn't isn't unset to logic for emitting the source message.
Caller is responsible for making sure multiple message chunks are
not emitted as multiple events by setting `msg_ext_skip_flush`...
Problem: No block events emitted with ext_cmdline for :if, :while, :try etc.
Solution: Emit cmdline block events; store the indent level of the
previous cmdline and whether a block event was emitted.
Problem: too many strlen() calls in userfunc.c
Solution: refactor userfunc.c and remove calls to strlen(),
drop set_ufunc_name() and roll it into alloc_ufunc(),
check for out-of-memory condition in trans_function_name_ext()
(John Marriott)
closes: vim/vim#16537b32800f7c5
Add missing change to call_user_func() from patch 8.1.1007.
Consistently use PRIdSCID instead of PRId64 for script IDs.
Co-authored-by: John Marriott <basilisk@internode.on.net>
Problem: We want to deprecate `nvim_err_write(ln)()` but there is no
obvious replacement (from Lua). Meanwhile we already have
`nvim_echo()` with an `opts` argument.
Solution: Add `err` argument to `nvim_echo()` that directly maps to
`:echoerr`.
Problem: Prompts are emitted as messages events, where cmdline events
are more appropriate. The user input is also emitted as
message events in fast context, so cannot be displayed with
vim.ui_attach().
Solution: Prompt for user input through cmdline prompts.
Problem:
`termopen` has long been a superficial wrapper around `jobstart`, and
has no real purpose. Also, `vim.system` and `nvim_open_term` presumably
will replace all features of `jobstart` and `termopen`, so centralizing
the logic will help with that.
Solution:
- Introduce `eval/deprecated.c`, where all deprecated eval funcs will live.
- Introduce "term" flag of `jobstart`.
- Deprecate `termopen`.
Problem: hard to view an existing buffer in the preview window
Solution: add the :pbuffer command (Yinzuo Jiang)
Similar as `:pedit` and `:buffer` command. `:pbuffer` edits buffer [N]
from the buffer list in the preview window.
`:pbuffer` can also open special buffer, for example terminal buffer.
closes: vim/vim#16222a2a2fe841e
Cherry-pick Test_popup_and_previewwindow_dump() changes from patch
9.0.0625.
Cherry-pick Run_noroom_for_newwindow_test() changes from patches
8.2.0432 and 9.0.0363.
Co-authored-by: Yinzuo Jiang <jiangyinzuo@foxmail.com>
Problem: :sleep! not hiding the cursor is an arbitrary difference from
Vim without obvious justification, and Vim's behavior isn't
easily achievable in Nvim.
Solution: Make :sleep! hide the cursor while sleeping.
Ref:
6a01b3fcc3b5c0ade437
Problem: Floating windows with focusable set to false can reasonably be
expected to be UI elements but are listed in some outputs that
should contain only regular windows.
Solution: Hide unfocusable floating windows from the default tabline and
:tabs.
Problem: Highlight group id is not propagated to the end of the message call
stack, where ext_messages are emitted.
Solution: Refactor message functions to pass along highlight group id
instead of attr id.
Problem: :setglobal doesn't work properly for 'ffu' and 'tsrfu' when
the local value is set (after v9.1.0831)
Solution: Check os_flags instead of buffer option variable (zeertzjq).
closes: vim/vim#159806eda269600
Problem: 'findexpr' can't be used for lambads
(Justin Keyes)
Solution: Replace the findexpr option with the findfunc option
(Yegappan Lakshmanan)
related: vim/vim#15905closes: vim/vim#15976a13f3a4f5d
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: 'findexpr' completion doesn't set v:fname to cmdline argument.
Solution: Set v:fname to the cmdline argument as-is (zeertzjq).
closes: vim/vim#1593420e045f781
Problem: Unnecessary nextcmd NULL checks in parse_command_modifiers().
Solution: Remove them (zeertzjq)
Every place parse_command_modifiers() is called, nextcmd is NULL, and
after it's set to non-NULL the function returns very soon.
Even if one day nextcmd may be non-NULL, the NULL checks may still be
wrong as the correct behavior may be overriding nextcmd.
closes: vim/vim#15620f7b8609446
Problem: Newline causes E749 in Ex mode (after 9.1.0573).
Solution: Don't execute empty command followed by a newline.
closes: vim/vim#156142432b4a753
Cherry-pick code change from patch 8.2.3405.
