Problem: The maximum search count uses a hard-coded value of 99
(Andres Monge, Joschua Kesper)
Solution: Make it configurable using the 'maxsearchcount' option.
related: vim/vim#8855fixes: vim/vim#17527closes: vim/vim#17695b7b7fa04bf
Co-authored-by: Christian Brabandt <cb@256bit.org>
This commit allows users to jump to the location specified in a
diagnostic's `relatedInformation`, using `gf` from within the
`open_float` window. The cursor need only be on line that displays the
related info.
Problem: winborder option only supported predefined styles and lacked support for custom border characters.
Solution: implement parsing for comma-separated list format that allows specifying 8 individual border characters (topleft, top, topright, right, botright, bottom, botleft, left).
Many terminals now include support for OSC 52 in their Primary Device
Attributes (DA1) response. This is preferable to using XTGETTCAP because
DA1 is _much_ more broadly supported.
Problem: Unable to tell whether msg_history_show event is emitted for a
:messages or g< command.
Solution: Add "prev_cmd" argument that is set to true for g<.
Problem:
Closes#31453
Solution:
Introduce `vim.lsp.Capability`, which may serve as the base class for
all LSP features that require caching data. it
- was created if there is at least one client that supports the specific method;
- was destroyed if all clients that support the method were detached.
- Apply the refactor for `folding_range.lua` and `semantic_tokens.lua`.
- Show active features in :checkhealth.
Future:
I found that these features that are expected to be refactored by
`vim.lsp.Capability` have one characteristic in common: they all send
LSP requests once the document is modified. The following code is
different, but they are all for this purpose.
- semantic tokens:
fb8dba413f/runtime/lua/vim/lsp/semantic_tokens.lua (L192-L198)
- inlay hints, folding ranges, document color
fb8dba413f/runtime/lua/vim/lsp/inlay_hint.lua (L250-L266)
I think I can sum up this characteristic as the need to keep certain
data synchronized with the latest version computed by the server.
I believe we can handle this at the `vim.lsp.Capability` level, and
I think it will be very useful.
Therefore, my next step is to implement LSP request sending and data
synchronization on `vim.lsp.Capability`, rather than limiting it to the
current create/destroy data approach.
Problem: Patch 9.1.1505 was not good
Solution: Revert "patch 9.1.1505: not possible to return completion type
for :ex command" and instead add the getcompletiontype()
function (Hirohito Higashi).
related: vim/vim#17606closes: vim/vim#1766296b3ef2389
Cherry-pick Test_multibyte_expression() from Vim, as it passes.
Co-authored-by: Hirohito Higashi <h.east.727@gmail.com>
Co-authored-by: Shougo Matsushita <Shougo.Matsu@gmail.com>
Problem: 'wildchar' does not work in search contexts
Solution: implement search completion when 'wildchar' is typed
(Girish Palya).
This change enhances Vim's command-line completion by extending
'wildmode' behavior to search pattern contexts, including:
- '/' and '?' search commands
- ':s', ':g', ':v', and ':vim' commands
Completions preserve the exact regex pattern typed by the user,
appending the completed word directly to the original input. This
ensures that all regex elements — such as '<', '^', grouping brackets
'()', wildcards '\*', '.', and other special characters — remain intact
and in their original positions.
---
**Use Case**
While searching (using `/` or `?`) for lines containing a pattern like
`"foobar"`, you can now type a partial pattern (e.g., `/f`) followed by
a trigger key (`wildchar`) to open a **popup completion menu** showing
all matching words.
This offers two key benefits:
1. **Precision**: Select the exact word you're looking for without
typing it fully.
2. **Memory aid**: When you can’t recall a full function or variable
name, typing a few letters helps you visually identify and complete the
correct symbol.
---
**What’s New**
Completion is now supported in the following contexts:
- `/` and `?` search commands
- `:s`, `:g`, `:v`, and `:vimgrep` ex-commands
---
**Design Notes**
- While `'wildchar'` (usually `<Tab>`) triggers completion, you'll have
to use `<CTRL-V><Tab>` or "\t" to search for a literal tab.
- **Responsiveness**: Search remains responsive because it checks for
user input frequently.
---
**Try It Out**
Basic setup using the default `<Tab>` as the completion trigger:
```vim
set wim=noselect,full wop=pum wmnu
```
Now type:
```
/foo<Tab>
```
This opens a completion popup for matches containing "foo".
For matches beginning with "foo" type `/\<foo<Tab>`.
---
**Optional: Autocompletion**
For automatic popup menu completion as you type in search or `:`
commands, include this in your `.vimrc`:
```vim
vim9script
set wim=noselect:lastused,full wop=pum wcm=<C-@> wmnu
autocmd CmdlineChanged [:/?] CmdComplete()
def CmdComplete()
var [cmdline, curpos, cmdmode] = [getcmdline(), getcmdpos(),
expand('<afile>') == ':']
var trigger_char = '\%(\w\|[*/:.-]\)$'
var not_trigger_char = '^\%(\d\|,\|+\|-\)\+$' # Exclude numeric range
if getchar(1, {number: true}) == 0 # Typehead is empty, no more
pasted input
&& !wildmenumode() && curpos == cmdline->len() + 1
&& (!cmdmode || (cmdline =~ trigger_char && cmdline !~
not_trigger_char))
SkipCmdlineChanged()
feedkeys("\<C-@>", "t")
timer_start(0, (_) => getcmdline()->substitute('\%x00', '',
'ge')->setcmdline()) # Remove <C-@>
endif
enddef
def SkipCmdlineChanged(key = ''): string
set ei+=CmdlineChanged
timer_start(0, (_) => execute('set ei-=CmdlineChanged'))
return key == '' ? '' : ((wildmenumode() ? "\<C-E>" : '') .. key)
enddef
**Optional: Preserve history recall behavior**
cnoremap <expr> <Up> SkipCmdlineChanged("\<Up>")
cnoremap <expr> <Down> SkipCmdlineChanged("\<Down>")
**Optional: Customize popup height**
autocmd CmdlineEnter : set bo+=error | exec $'set ph={max([10,
winheight(0) - 4])}'
autocmd CmdlineEnter [/?] set bo+=error | set ph=8
autocmd CmdlineLeave [:/?] set bo-=error ph&
```
closes: vim/vim#175706b49fba8c8
Co-authored-by: Girish Palya <girishji@gmail.com>
Problem: no easy way to deduplicate text
Solution: add the :uniq ex command
(Hirohito Higashi)
closes: vim/vim#1753874f0a77bb9
Co-authored-by: Hirohito Higashi <h.east.727@gmail.com>
Make `vim.iter():take()` and `vim.iter():skip()`
optionally accept predicates to enable takewhile
and skipwhile patterns used in functional
programming.
Problem: No way to compute intersection of two version ranges, which is
useful when computing version range that fits inside several reference
ranges.
Solution: Add `vim.version.intersect()`.
Problem: `tostring()` applied to version range doesn't return
human-readable text with information about the range.
Solution: Add `__tostring()` method.
Problem: ext_messages cannot tell when the screen was cleared, which is
needed to clear visible messages. An empty message is also
never emitted, but clears messages from the message grid.
Solution: Repurpose the "msg_clear" event to be emitted when the screen
was cleared. Emit an empty message with the `empty` kind to
hint to a UI to clear the cmdline area.
Problem: ext_messages is implemented to mimic the message grid
implementation w.r.t. scrolling messages, clearing scrolled
messages, hit-enter-prompts and replacing a previous message.
Meanwhile, an ext_messages UI may not be implemented in a way
where these events are wanted. Moreover, correctness of these
events even assuming a "scrolled message" implementation
depends on fragile "currently visible messages" global state,
which already isn't correct after a previous message was
supposed to have been overwritten (because that should not only
happen when `msg_scroll == false`).
Solution: - No longer attempt to keep track of the currently visible
messages: remove the `msg_ext(_history)_visible` variables.
UIs may remove messages pre-emptively (timer based), or never
show messages that don't fit a certain area in the first place.
- No longer emit the `msg(_history)_clear` events to clear
"scrolled" messages. This opens up the `msg_clear` event to
be emitted when messages should actually be cleared (e.g.
when the screen is cleared). May also be useful to emit before
the first message in an event loop cycle as a hint to the UI
that it is a new batch of messages (vim._extui currently
schedules an event to determine that).
- Set `replace_last` explicitly at the few callsites that want
this to be set to true to replace an incomplete status message.
- Don't store a "keep" message to be re-emitted.
Problem:
Not easy to get user-input in prompt-buffer before the user submits the
input. Under the current system user/plugin needs to read the buffer
contents, figure out where the prompt is, then extract the text.
Solution:
- Add prompt_getinput().
- Extract prompt text extraction logic to a separate function
Problem:
In LSP configs, the function form of `cmd()` cannot easily get the
resolved root dir (workspace). One of the main use-cases of a dynamic
`cmd()` is to be able to start a new server whose binary may be located
*in the workspace* ([example](https://github.com/neovim/nvim-lspconfig/pull/3912)).
Compare `reuse_client()`, which also receives the resolved config.
Solution:
Pass the resolved config to `cmd()`.
Co-authored-by: Justin M. Keyes <justinkz@gmail.com>
This commit changes the `offset!` directive so that instead of setting a
`metadata.range` value for the entire pattern, it will set a
`metadata.offset` value. This offset will be applied to the range only
in `vim.treesitter.get_range()`, rather than at directive application
time. This allows the offset to be applied to any and all nodes captured
by the given pattern, and removes the requirement that `#offset!` be
applied to only a single node.
The downside of this change is that plugins which read from
`metadata.range` may be thrown off course, but such plugins should
prefer `vim.treesitter.get_range()` when retrieving ranges anyway.
Note that `#trim!` still sets `metadata.range`, and
`vim.treesitter.get_range()` still reads from `metadata.range`, if it
exists.
Problem: using f-flag in 'complete' conflicts with Neovims filename
completion (glepnir, after v9.1.1301).
Solution: use upper-case "F" flag for completion functions
(Girish Palya).
fixes: vim/vim#17347closes: vim/vim#1737814f6da5ba8
Co-authored-by: Girish Palya <girishji@gmail.com>
Problem: completion: not possible to limit number of matches
Solution: allow to limit the matches for 'complete' sources by using the
"{flag}^{limit}" notation (Girish Palya)
This change extends the 'complete' option to support limiting the
number of matches returned from individual completion sources.
**Rationale:** In large files, certain sources (such as the current
buffer) can generate an overwhelming number of matches, which may cause
more relevant results from other sources (e.g., LSP or tags) to be
pushed out of view. By specifying per-source match limits, the
completion menu remains balanced and diverse, improving visibility and
relevance of suggestions.
A caret (`^`) followed by a number can be appended to a source flag to
specify the maximum number of matches for that source. For example:
```
:set complete=.^9,w,u,t^5
```
In this configuration:
- The current buffer (`.`) will return up to 9 matches.
- The tag completion (`t`) will return up to 5 matches.
- Other sources (`w`, `u`) are not limited.
This feature is fully backward-compatible and does not affect behavior
when the `^count` suffix is not used.
The caret (`^`) was chosen as the delimiter because it is least likely
to appear in file names.
closes: vim/vim#170870ac1eb3555
Cherry-pick test_options.vim change from patch 9.1.1325.
Co-authored-by: Girish Palya <girishji@gmail.com>
Problem: completion: cannot configure completion functions with
'complete'
Solution: add support for setting completion functions using the f and o
flag for 'complete' (Girish Palya)
This change adds two new values to the `'complete'` (`'cpt'`) option:
- `f` – invokes the function specified by the `'completefunc'` option
- `f{func}` – invokes a specific function `{func}` (can be a string or `Funcref`)
These new flags extend keyword completion behavior (e.g., via `<C-N>` /
`<C-P>`) by allowing function-based sources to participate in standard keyword
completion.
**Key behaviors:**
- Multiple `f{func}` values can be specified, and all will be called in order.
- Functions should follow the interface defined in `:help complete-functions`.
- When using `f{func}`, escaping is required for spaces (with `\`) and commas
(with `\\`) in `Funcref` names.
- If a function sets `'refresh'` to `'always'`, it will be re-invoked on every
change to the input text. Otherwise, Vim will attempt to reuse and filter
existing matches as the input changes, which matches the default behavior of
other completion sources.
- Matches are inserted at the keyword boundary for consistency with other completion methods.
- If finding matches is time-consuming, `complete_check()` can be used to
maintain responsiveness.
- Completion matches are gathered in the sequence defined by the `'cpt'`
option, preserving source priority.
This feature increases flexibility of standard completion mechanism and may
reduce the need for external completion plugins for many users.
**Examples:**
Complete matches from [LSP](https://github.com/yegappan/lsp) client. Notice the use of `refresh: always` and `function()`.
```vim
set cpt+=ffunction("g:LspCompletor"\\,\ [5]). # maxitems = 5
def! g:LspCompletor(maxitems: number, findstart: number, base: string): any
if findstart == 1
return g:LspOmniFunc(findstart, base)
endif
return {words: g:LspOmniFunc(findstart, base)->slice(0, maxitems), refresh: 'always'}
enddef
autocmd VimEnter * g:LspOptionsSet({ autoComplete: false, omniComplete: true })
```
Complete matches from `:iabbrev`.
```vim
set cpt+=fAbbrevCompletor
def! g:AbbrevCompletor(findstart: number, base: string): any
if findstart > 0
var prefix = getline('.')->strpart(0, col('.') - 1)->matchstr('\S\+$')
if prefix->empty()
return -2
endif
return col('.') - prefix->len() - 1
endif
var lines = execute('ia', 'silent!')
if lines =~? gettext('No abbreviation found')
return v:none # Suppresses warning message
endif
var items = []
for line in lines->split("\n")
var m = line->matchlist('\v^i\s+\zs(\S+)\s+(.*)$')
if m->len() > 2 && m[1]->stridx(base) == 0
items->add({ word: m[1], info: m[2], dup: 1 })
endif
endfor
return items->empty() ? v:none :
items->sort((v1, v2) => v1.word < v2.word ? -1 : v1.word ==# v2.word ? 0 : 1)
enddef
```
**Auto-completion:**
Vim's standard completion frequently checks for user input while searching for
new matches. It is responsive irrespective of file size. This makes it
well-suited for smooth auto-completion. You can try with above examples:
```vim
set cot=menuone,popup,noselect inf
autocmd TextChangedI * InsComplete()
def InsComplete()
if getcharstr(1) == '' && getline('.')->strpart(0, col('.') - 1) =~ '\k$'
SkipTextChangedIEvent()
feedkeys("\<c-n>", "n")
endif
enddef
inoremap <silent> <c-e> <c-r>=<SID>SkipTextChangedIEvent()<cr><c-e>
def SkipTextChangedIEvent(): string
# Suppress next event caused by <c-e> (or <c-n> when no matches found)
set eventignore+=TextChangedI
timer_start(1, (_) => {
set eventignore-=TextChangedI
})
return ''
enddef
```
closes: vim/vim#17065cbe53191d0
Temporarily remove bufname completion with #if 0 to make merging easier.
Co-authored-by: Girish Palya <girishji@gmail.com>
Co-authored-by: Christian Brabandt <cb@256bit.org>
Co-authored-by: glepnir <glephunter@gmail.com>
Problem:
Developing/troubleshooting plugins has friction because "restarting"
Nvim requires quitting and manually starting again. #32484
Solution:
- Implement a `:restart` command which emits `restart` UI event.
- Handle the `restart` UI event in the builtin TUI client: stop the
`nvim --embed` server, start a new one, and attach to it.
Problem: Unable to emit a message with arbitrary kind.
Solution: Add a "kind" opts field to nvim_echo().
Use it to set the "list_cmd" kind for vim.show_pos().
Problem: "99 searchcount ought to be enough for anyone."
Solution: Increase `SEARCH_STAT_DEF_MAX_COUNT` to 999, which I'm sure
will suffice for the next twenty years.
Co-authored-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Problem: Consecutive "msg_show" events stemming from an `:echon`
command are supposed to be appended without a newline, this
information is not encoded in the "msg_show" event.
Solution: Add an "append" parameter to the "msg_show" event that is set
to true to indicate the message should not start on a new line.
Considered alternative: Emit a newline for the common case instead at the
start of a new message. That way UIs can more closely follow the logic
as it is implemented for the message grid currently. This would be a
breaking change. The "append" parameter seems OK.
|vim.glob.to_lpeg()| uses a new LPeg-based implementation (Peglob) that
provides ~50% speedup for complex patterns. The implementation restores
support for nested braces and follows LSP 3.17 specification with
additional constraints for improved correctness and resistance to
backtracking edge cases.
Problem:
No way for a user to limit 'exrc' search in parent directories (compare
editorconfig.root).
Solution:
A configuration file can unset 'exrc', disabling the search for its
parent directories.
Problem: The 'grepformat' option is global option, but it would be
useful to have it buffer-local, similar to 'errorformat' and
other quickfix related options (Dani Dickstein)
Solution: Add the necessary code to support global-local 'grepformat',
allowing different buffers to parse different grep output
formats (glepnir)
fixes: vim/vim#17316closes: vim/vim#173157b9eb6389d
Co-authored-by: glepnir <glephunter@gmail.com>
