Problem: trim(): hard to use default mask (partly revert v9.0.2040)
Solution: use default mask when it is empty
The default 'mask' value is pretty complex, as it includes many
characters. Yet, if one needs to specify the trimming direction, the
third argument, 'trim()' currently requires the 'mask' value to be
provided explicitly.
Currently, an empty 'mask' will make 'trim()' call return 'text' value
that is passed in unmodified. It is unlikely that someone is using it,
so the chances of scripts being broken by this change are low.
Also, this reverts commit 9.0.2040 (which uses v:none for the default
and requires to use an empty string instead).
closes: vim/vim#133588079917447
vim-patch:9.0.2040: trim(): hard to use default mask
Problem: trim(): hard to use default mask
Solution: Use default 'mask' when it is v:none
The default 'mask' value is pretty complex, as it includes many
characters. Yet, if one needs to specify the trimming direction, the
third argument, 'trim()' currently requires the 'mask' value to be
provided explicitly.
'v:none' is already used to mean "use the default argument value" in
user defined functions. See |none-function_argument| in help.
closes: vim/vim#133636e6386716f
Co-authored-by: Illia Bobyr <illia.bobyr@gmail.com>
Problem: [security] use-after-free with wildmenu
Solution: properly clean up the wildmenu when exiting
Fix wildchar/wildmenu/pum memory corruption with special wildchar's
Currently, using `wildchar=<Esc>` or `wildchar=<C-\>` can lead to a
memory corruption if using wildmenu+pum, or wrong states if only using
wildmenu. This is due to the code only using one single place inside the
cmdline process loop to perform wild menu clean up (by checking
`end_wildmenu`) but there are other odd situations where the loop could
have exited and we need a post-loop clean up just to be sure. If the
clean up was not done you would have a stale popup menu referring to
invalid memory, or if not using popup menu, incorrect status line (if
`laststatus=0`).
For example, if you hit `<Esc>` two times when it's wildchar, there's a
hard-coded behavior to exit command-line as a failsafe for user, and if
you hit `<C-\><C-\><C-N>` it will also exit command-line, but the clean
up code would not have hit because of specialized `<C-\>` handling.
Fix Ctrl-E / Ctrl-Y to not cancel/accept wildmenu if they are also
used for 'wildchar'/'wildcharm'. Currently they don't behave properly,
and also have potentially memory unsafe behavior as the logic is
currently not accounting for this situation and try to do both.
(Previous patch that addressed this: vim/vim#11677)
Also, correctly document Escape key behavior (double-hit it to escape)
in wildchar docs as it's previously undocumented.
In addition, block known invalid chars to be set in `wildchar` option,
such as Ctrl-C and `<CR>`. This is just to make it clear to the user
they shouldn't be set, and is not required for this bug fix.
closes: vim/vim#133618f4fb007e4
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: A few remaining cmdline completion issues with C-E/Y
Solution: Fix cmdline completion fuzzy/Ctrl-E/Ctrl-Y/options when not
used at the end
Fix cmdline completion fuzzy/Ctrl-E/Ctrl-Y/options when not used at the end
A few places in the cmdline completion code only works properly when the
user hits Tab (or 'wildchar') at the end of the cmdline, even though
it's supposed to work even in the middle of the line.
For fuzzy search, `:e ++ff`, and `:set hl=`, fix completion code to make
sure to use `xp_pattern_len` instead of assuming the entire `xp_pattern`
is the search pattern (since it contains texts after the cursor).
Fix Ctrl-E / Ctrl-Y to not jump to the end when canceling/accepting a
wildmenu completion. Also, make them work even when not using
`set wildoptions+=pum` as there is no drawback to doing so.
(Related issue where this was brought up: vim/vim#13331)
closes: vim/vim#13362209ec90b9b
Cherry-pick ex_getln.c changes from patch 9.0.2035.
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: completion shows current word after completion restart
Solution: remove the word being completed after completion restart
The word being completed is shown in a completion list after completion
restart, because it isn't removed from the current buffer before
searching for matches.
Also adjust `Test_complete_add_onechar` to match the new behavior.
closes: vim/vim#133492e3cd52fa0
Co-authored-by: nwounkn <nwounkn@gmail.com>
BREAKING CHANGE: This breaks the OptionSet autocommand, as the `v:` values associated with it (`v:option_new`, `v:option_old`, `v:option_oldlocal` and `v:option_oldglobal`) are now the same type as the option, instead of all option values being converted to strings.
Problem: gcc overflow-warning for f_resolve
Solution: use pointer p instead of pointer q[-1]
Suppress the following warning:
```
filepath.c: In function ‘f_resolve’:
filepath.c:2162:27: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
2162 | q[-1] = NUL;
```
Closes: vim/vim#13352closes: vim/vim#13353215c3261a2
Co-authored-by: Ken Takata <kentkt@csc.jp>
A lot of code inside HAVE_WORKING_LIBINTL doesn't really depend on a
"working libintl". For instance ex_language is also used for ":lang collate"
and ":lang time".
Also ":lang C" should not fail just because translations aren't available (it
just means use the default text).
References:
https://github.com/neovim/neovim/pull/12d00ead2e5
separate ifdefs for locale and gettext got merged together.
8253e29971
Unmotivated switcharoo of get_mess_env() logic. If available, get_locale_val(LC_MESSAGES) is the correct implementation.
Problem: Cannot accurately get mouse clicking position when clicking on
a TAB or with virtual text.
Solution: Add a "coladd" field to getmousepos() result.
closes: vim/vim#13335f5a94d5165
Problem: `TextChangedI` can trigger on entering Insert mode if there
was previously a change not in Insert mode.
Solution: Make it trigger only when text is actually changed in Insert
mode.
closes: vim/vim#13265closes: vim/vim#13338d7ae263af8
Co-authored-by: Evgeni Chasnovski <evgeni.chasnovski@gmail.com>
Problem: no max callback recursion limit
Solution: bail out, if max call recursion for callback functions
has been reached.
This checks the 'maxfuncdepth' setting and throws E169 when a callback
function recursively calls itself.
closes: vim/vim#13337closes: vim/vim#1333947510f3d65
Co-authored-by: Christian Brabandt <cb@256bit.org>
runtime(doc): Improve command-line completion docs (vim/vim#13331)
* Improve command-line completion docs
Add more details about 'ignorecase' and its effect on cmdline
completion.
Make sure keys used in wildmenu are properly documented and linked in the
keys' documentation entries, and in `:h index` for proper
cross-referencing, as wildmenu popup is slightly different from
insert-mode popup menu.
* Fix docs typos
2bbd0d30ee
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
Problem: When clicking in the middle of a TAB, getmousepos() returns
the column of the next char instead of the TAB.
Solution: Break out of the loop when the vcol to find is inside current
char. Fix invalid memory access when calling virtcol2col() on
an empty line.
closes: vim/vim#13321b583eda703
Problem: Coverity complains about change in charset (after v9.0.2017)
Solution: check pointer t at index 0
closes: vim/vim#13322cd6ee69358
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem:
The next command after `silent !{cmd}` or `silent lua print('str')`
prints an empty line before printing a message, because these commands
set `msg_didout = true` despite not printing any messages.
Solution:
Set `msg_didout = true` only if `msg_silent == 0`
Problem: Peeking and flushing output slows down execution.
Solution: Do not update the mode message when global_busy is set. Do not
flush when only peeking for a character. (Ken Takata)
cb574f4154
PROBLEM:
Currently `:echoerr` prints multi-line strings in a single line
as `:echom` does (Note: `:echon` can print multi-line strings well).
This makes stacktrace printed via echoerr difficult to read.
Example code:
try
lua error("lua stacktrace")
catch
echoerr v:exception
endtry
Output:
Error detected while processing a.vim[5]..a.vim:
line 4:
Vim(lua):E5108: Error executing lua [string ":lua"]:1: lua stacktrace^@stack traceback:^@^I[C]: in function 'error'^@^I[string ":lua"]:1: in main chunk
SOLUTION:
Allow echoerr to print multiline messages (e.g., lua exceptions),
because this command is usually used to print stacktraces.
Output after the fix:
Error detected while processing a.vim[5]..a.vim:
line 4:
Vim(lua):E5108: Error executing lua [string ":lua"]:1: lua stacktrace
stack traceback:
[C]: in function 'error'
[string ":lua"]:1: in main chunk
Problem: complete_info() returns wrong index
Solution: Make order of 'info' in completion_info consistent
Start the iteration from the same point and follow the same direction as
done when assigning the completion numbers. This way we remove the
dependence on the completion direction and make the order of 'info'
consistent.
closes: vim/vim#12230closes: vim/vim#1297169fb5afb3b
Co-authored-by: LemonBoy <thatlemon@gmail.com>
Problem: Vim9: in script cannot set item in uninitialized list.
Solution: When a list is NULL allocate an empty one. (closesvim/vim#8461)
e65081d1b5
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: linebreak applies for leading whitespace
Solution: only apply linebreak, once we have found non-breakat chars in
the line
closes: vim/vim#13228closes: vim/vim#13243dd75fcfbdf
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: The style guide states that all switch statements that are not conditional on an enum must have a `default` case, but does not give any explicit guideline for switch statements that are conditional on enums. As a result, a `default` case is added in many enum switch statements, even when the switch statement is exhaustive. This is not ideal because it removes the ability to have compiler errors to easily detect unchanged switch statements when a new possible value for an enum is added.
Solution: Add explicit guidelines for switch statements that are conditional on an enum, clarifying that a `default` case is not necessary if the switch statement is exhaustive. Also refactor pre-existing code with unnecessary `default` cases.
Problem: cmdline-completion for comma-separated options wrong
Solution: Fix command-line expansions for options with filenames with
commas
Fix command-line expansions for options with filenames with commas
Cmdline expansion for option values that take a comma-separated list
of file names is currently not handling file names with commas as the
commas are not escaped. For such options, the commas in file names need
to be escaped (to differentiate from a comma that delimit the list
items). The escaped comma is unescaped in `copy_option_part()` during
option parsing.
Fix as follows:
- Cmdline completion for option values with comma-separated file/folder
names will not start a new match when seeing `\\,` and will instead
consider it as one value.
- File/folder regex matching will strip the `\\` when seeing `\\,` to
make sure it can match the correct files/folders.
- The expanded value will escape `,` with `\\,`, similar to how spaces
are escaped to make sure the option value is correct on the cmdline.
This fix also takes into account the fact that Win32 Vim handles file
name escaping differently. Typing '\,' for a file name results in it
being handled literally but in other platforms '\,' is interpreted as a
simple ',' and commas need to be escaped using '\\,' instead.
Also, make sure this new logic only applies to comma-separated options
like 'path'. Non-list options like 'set makeprg=<Tab>' and regular ex
commands like `:edit <Tab>` do not require escaping and will continue to
work.
Also fix up documentation to be clearer. The original docs are slightly
misleading in how it discusses triple slashes for 'tags'.
closes: vim/vim#13303
related: vim/vim#1330154844857fd
Co-authored-by: Yee Cheng Chin <ychin.git@gmail.com>
This adds the checks in https://neovim.io/doc/reports/clang/ when using
clang-tidy. The strategy is to enable all clang-analyzer checks, and
disable only the checks for the warnings that exist currently. This
allows us to eliminate each warning type without blocking ongoing work,
but also without adding bugs for already eliminated warnings.
The plan is to eventually eliminate https://neovim.io/doc/reports/clang/
by completely integrating it into the clang-tidy check.
Also add make and cmake targets `clang-analyzer` to run this check.
*** CID 466056: Control flow issues (DEADCODE)
/src/nvim/window.c: 6951 in file_name_in_line()
6945 // Search backward for first char of the file name.
6946 // Go one char back to ":" before "//", or to the drive letter before ":\" (even if ":"
6947 // is not in 'isfname').
6948 while (ptr > line) {
6949 if ((len = (size_t)(utf_head_off(line, ptr - 1))) > 0) {
6950 ptr -= len + 1;
>>> CID 466056: Control flow issues (DEADCODE)
>>> Execution cannot reach the expression "path_has_drive_letter(ptr - 2)" inside this statement: "if (vim_isfilec((uint8_t)pt...".
6951 } else if (vim_isfilec((uint8_t)ptr[-1])
6952 || (len >= 2 && path_has_drive_letter(ptr - 2))
6953 || ((options & FNAME_HYP) && path_is_url(ptr - 1))) {
6954 ptr--;
6955 } else {
6956 break;
"VimEnter foo" was accepted as a valid event name for "VimEnter".
Events delimited with commas, eg. "VimEnter,BufRead", were also
accepted, even though only the first event was actually parsed.
Co-authored-by: ii14 <ii14@users.noreply.github.com>
long is 32 bits on windows, while it is 64 bits on other architectures.
This makes the type suboptimal for a codebase meant to be
cross-platform. Replace it with more appropriate integer types.
The 'arabicshape' feature of vim is a transformation of unicode text to
make arabic and some related scripts look better at display time. In
particular the content of a cell will be adjusted depending on the
(original) content of the cells just before and after it.
This is implemented by the arabic_shape() function in nvim. Before this
commit, shaping was invoked in four different contexts:
- when rendering buffer text in win_line()
- in line_putchar() for rendering virtual text
- as part of grid_line_puts, used by messages and statuslines and
similar
- as part of draw_cmdline() for drawing the cmdline
This replaces all these with a post-processing step in grid_put_linebuf(),
which has become the entry point for all text rendering after recent
refactors.
An aim of this is to make the handling of multibyte text yet simpler.
One of the main reasons multibyte chars needs to be "parsed" into
codepoint arrays of composing chars is so that these could be inspected
for the purpose of shaping. This can likely be vastly simplified in many
contexts where only the total length (in bytes) and width of composed
char is needed.
