Problem: cannot get information about command line completion
Solution: add CmdlineLeavePre autocommand and cmdcomplete_info() Vim
script function (Girish Palya)
This commit introduces two features to improve introspection and control
over command-line completion in Vim:
- Add CmdlineLeavePre autocmd event:
A new event triggered just before leaving the command line and before
CmdlineLeave. It allows capturing completion-related state that is
otherwise cleared by the time CmdlineLeave fires.
- Add cmdcomplete_info() Vim script function:
Returns a Dictionary with details about the current command-line
completion state.
These are similar in spirit to InsertLeavePre and complete_info(),
but focused on command-line mode.
**Use case:**
In [[PR vim/vim#16759](https://github.com/vim/vim/pull/16759)], two examples
demonstrate command-line completion: one for live grep, and another for
fuzzy file finding. However, both examples share two key limitations:
1. **Broken history recall (`<Up>`)**
When selecting a completion item via `<Tab>` or `<C-n>`, the original
pattern used for searching (e.g., a regex or fuzzy string) is
overwritten in the command-line history. This makes it impossible to
recall the original query later.
This is especially problematic for interactive grep workflows, where
it’s useful to recall a previous search and simply select a different
match from the menu.
2. **Lack of default selection on `<CR>`**
Often, it’s helpful to allow `<CR>` (Enter) to accept the first match
in the completion list, even when no item is explicitly selected. This
behavior is particularly useful in fuzzy file finding.
----
Below are the updated examples incorporating these improvements:
**Live grep, fuzzy find file, fuzzy find buffer:**
```vim
command! -nargs=+ -complete=customlist,GrepComplete Grep VisitFile()
def GrepComplete(arglead: string, cmdline: string, cursorpos: number):
list<any>
return arglead->len() > 1 ? systemlist($'grep -REIHns "{arglead}"' ..
' --exclude-dir=.git --exclude=".*" --exclude="tags" --exclude="*.swp"') : []
enddef
def VisitFile()
if (selected_match != null_string)
var qfitem = getqflist({lines: [selected_match]}).items[0]
if qfitem->has_key('bufnr') && qfitem.lnum > 0
var pos = qfitem.vcol > 0 ? 'setcharpos' : 'setpos'
exec $':b +call\ {pos}(".",\ [0,\ {qfitem.lnum},\ {qfitem.col},\ 0]) {qfitem.bufnr}'
setbufvar(qfitem.bufnr, '&buflisted', 1)
endif
endif
enddef
nnoremap <leader>g :Grep<space>
nnoremap <leader>G :Grep <c-r>=expand("<cword>")<cr>
command! -nargs=* -complete=customlist,FuzzyFind Find
execute(selected_match != '' ? $'edit {selected_match}' : '')
var allfiles: list<string>
autocmd CmdlineEnter : allfiles = null_list
def FuzzyFind(arglead: string, _: string, _: number): list<string>
if allfiles == null_list
allfiles = systemlist($'find {get(g:, "fzfind_root", ".")} \! \(
-path "*/.git" -prune -o -name "*.swp" \) -type f -follow')
endif
return arglead == '' ? allfiles : allfiles->matchfuzzy(arglead)
enddef
nnoremap <leader><space> :<c-r>=execute('let
fzfind_root="."')\|''<cr>Find<space><c-@>
nnoremap <leader>fv :<c-r>=execute('let
fzfind_root="$HOME/.vim"')\|''<cr>Find<space><c-@>
nnoremap <leader>fV :<c-r>=execute('let
fzfind_root="$VIMRUNTIME"')\|''<cr>Find<space><c-@>
command! -nargs=* -complete=customlist,FuzzyBuffer Buffer execute('b '
.. selected_match->matchstr('\d\+'))
def FuzzyBuffer(arglead: string, _: string, _: number): list<string>
var bufs = execute('buffers', 'silent!')->split("\n")
var altbuf = bufs->indexof((_, v) => v =~ '^\s*\d\+\s\+#')
if altbuf != -1
[bufs[0], bufs[altbuf]] = [bufs[altbuf], bufs[0]]
endif
return arglead == '' ? bufs : bufs->matchfuzzy(arglead)
enddef
nnoremap <leader><bs> :Buffer <c-@>
var selected_match = null_string
autocmd CmdlineLeavePre : SelectItem()
def SelectItem()
selected_match = ''
if getcmdline() =~ '^\s*\%(Grep\|Find\|Buffer\)\s'
var info = cmdcomplete_info()
if info != {} && info.pum_visible && !info.matches->empty()
selected_match = info.selected != -1 ? info.matches[info.selected] : info.matches[0]
setcmdline(info.cmdline_orig). # Preserve search pattern in history
endif
endif
enddef
```
**Auto-completion snippet:**
```vim
set wim=noselect:lastused,full wop=pum wcm=<C-@> wmnu
autocmd CmdlineChanged : CmdComplete()
def CmdComplete()
var [cmdline, curpos] = [getcmdline(), getcmdpos()]
if getchar(1, {number: true}) == 0 # Typehead is empty (no more pasted input)
&& !pumvisible() && curpos == cmdline->len() + 1
&& cmdline =~ '\%(\w\|[*/:.-]\)$' && cmdline !~ '^\d\+$' # Reduce noise
feedkeys("\<C-@>", "ti")
SkipCmdlineChanged() # Suppress redundant completion attempts
# Remove <C-@> that get inserted when no items are available
timer_start(0, (_) => getcmdline()->substitute('\%x00', '', 'g')->setcmdline())
endif
enddef
cnoremap <expr> <up> SkipCmdlineChanged("\<up>")
cnoremap <expr> <down> SkipCmdlineChanged("\<down>")
autocmd CmdlineEnter : set bo+=error
autocmd CmdlineLeave : set bo-=error
def SkipCmdlineChanged(key = ''): string
set ei+=CmdlineChanged
timer_start(0, (_) => execute('set ei-=CmdlineChanged'))
return key != '' ? ((pumvisible() ? "\<c-e>" : '') .. key) : ''
enddef
```
These customizable snippets can serve as *lightweight* and *native*
alternatives to picker plugins like **FZF** or **Telescope** for common,
everyday workflows. Also, live grep snippet can replace **cscope**
without the overhead of building its database.
closes: vim/vim#17115https://github.com/vim/vim/commit/92f68e26ec36f2c263db5bea4f39d8503e0b741c
Co-authored-by: Girish Palya <girishji@gmail.com>
Problem:
Cursor is visible in "hidden" floating window.
Solution:
Hide cursor when curwin is a hidden floating window.
Show cursor after returning to a normal (non-hidden) window.
Problem: Change applied in d3e495ce uses a byte-offset where a virtual
column is expected.
Solution: Set the cursor directly through a <Cmd> mapping, while making
sure the commands are ordered correctly by adding them to the
type-ahead buffer.
This commit fixes the following error message:
```
Compiler not supported: make inc< sw< sts<
```
1. orginal value: `setl com< cms< et< fo<| compiler make inc< sw< sts<`
2. correct value: `setl com< cms< et< fo< inc< sw< sts< | compiler make`
While at it, let's also document the g:yaml_recommended_style variable.
closes: vim/vim#17179https://github.com/vim/vim/commit/229f79c1683fa52159e692ff8b53449e117a38b2
Co-authored-by: Vincent Law <vlaw@users.noreply.github.com>
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Transpiled Lua code from vim9script is not amenable to static
analysis, requiring manual cleanup or ignoring parts of our codebase.
Solution: Revert to pre-rewrite version of (low-impact) legacy plugins
and remove the vim9jit shim.
Problem: When iterating in reverse with {start} > {end} in
`nvim_buf_get_extmarks()`, marks that overlap {start} and are
greater than {end} are included in the return value twice.
Marks that overlap {end} and do not overlap {start} are not
not included in the return value at all. Marks are not
actually returned in a meaningful "traversal order".
Solution: Rather than actually iterating in reverse, (also possible but
requires convoluted conditions and would require fetching
overlapping marks for both the {start} and {end} position,
while still ending up with non-traversal ordered marks),
iterate normally and reverse the return value.
Problem:
Default 'statusline' is implemented in C and not representable as
a statusline expression. This makes it hard for user configs/plugins to
extend it.
Solution:
- Change the default 'statusline' slightly to a statusline expression.
- Remove the C implementation.
Problem: We allow setting 'cmdheight' to 0 with ext_messages enabled
since b72931e7. Enabling ext_messages with vim.ui_attach()
implicitly sets 'cmdheight' to 0 for BWC. When non-zero
'cmdheight' is wanted, this behavior make it unnecessarily
hard to keep track of the user configured value.
Solution: Add set_cmdheight to vim.ui_attach() opts table that can be
set to false to avoid setting 'cmdheight' to 0.
Useful to e.g. limit the height to the window height, avoiding unnecessary
work. Or to find out how many buffer lines beyond "start_row" take up a
certain number of logical lines (returned in "end_row" and "end_vcol").
Problem: filetype: some man files are not recognized
(e.g. 1p (POSIX commands))
Solution: update the filetype detection pattern and detect more man
files as nroff (Eisuke Kawashima)
- sections are revised referring to
- debian-12:/etc/manpath.config
- fedora-41:/etc/man_db.conf
- detection logic is improved
- detection test is implemented
closes: vim/vim#17117https://github.com/vim/vim/commit/babdb0554a44a5e406a499bf8c315e660b2a028e
Co-authored-by: Eisuke Kawashima <e-kwsm@users.noreply.github.com>
E749 is given when :print (with any range) is issued on an empty buffer,
like the one you get with :new or :enew. Furthermore, due to Vi
compatibility :| is a synonym.
As a result, mappings intended to include a <bar> separator (esp. in the
case of boolean or "||") between commands can generate E749 on startup
when placed in a vimrc if the bars are not properly encoded or escaped.
[1]. Document this failure mode and synonym near the generated error,
and cross link with :help :bar. Note that one must read or scroll quite
a bit to find the mention of :| behaving like :print!
[1]: https://vi.stackexchange.com/q/46625/10604closes: vim/vim#17173https://github.com/vim/vim/commit/187df69fd1563535773b8ddb2de1b0f5dd3dd2e9
Co-authored-by: D. Ben Knoble <ben.knoble+github@gmail.com>
- Only match valid predefined and option variables.
- Match scope dictionaries.
- Highlight scope prefixed variables as a scope dictionary accessor. The
vimVarScope syntax group can be linked to vimVar to disable this.
- Include support for Neovim-only predefined and option variables.
Temporary collateral damage - scope dictionaries match instead of keys
in dictionary literals.
closes: vim/vim#16727https://github.com/vim/vim/commit/3dca512939991004e434b66635b4b7b626a45afe
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Problem:
`vim.lsp.buf.[implementation|definition|...]({ reuse_win = true })` does not
jump cursor to existing window if buffer is already open.
Steps to reproduce:
1. `nvim repro.lua`
2. Insert anything that lsp can read to open the library definition/implementation, e.g., `vim.keymap.set`
3. open `repro.lua` buffer and the library buffer side by side.
4. type `gd` over `set` to jump to the library definition.
The open buffer is scrolled to the target line, but cursor does not jump.
Solution:
Call nvim_set_current_win if necessary.
- Simplify usage:
- Instead of `nvim -l src/gen/gen_lsp.lua gen` now just
run `./src/gen/gen_lsp.lua`
- Removed `--methods` and `--capabilities` options.
- Improved rendering code in various areas.
This change modifies gen_lsp.lua so alias types are generated for
various types of lsp methods to distinguish between notifications
and requests:
- vim.lsp.protocol.Method.ServerToClient.Request
- vim.lsp.protocol.Method.ServerToClient.Notification
- vim.lsp.protocol.Method.ClientToServer.Request
- vim.lsp.protocol.Method.ClientToServer.Notification
These types are then used instead of `string` where appropriate.
