Problem:
Spell file downloads relied on Vimscript and netrw (:Nread). If netrw is
disabled, downloads fail.
Solution:
Port the logic to Lua as `nvim.spellfile` and wire it via a Lua plugin that
handles `SpellFileMissing`. Use `vim.net.request()` with a timeout for HTTP,
prompt via `vim.fn.input` and report via `vim.notify`.
Closes#7189
Problem:
From https://matrix.to/#/!cylwlNXSwagQmZSkzs:matrix.org/$Ofj-TFIsEMbp0O9OhE8xuZSNi-nhRLtZTOgs6JRLNrs?via=matrix.org&via=gitter.im&via=mozilla.org
In lesson 2.6, users are asked to remove the second, forth and fifth
lines with `dd` command, then they are asked to undo twice to make the
text go back to original state. But after that, the mark ✗ appears
again, which confuses the user because they think they do something
wrong. This is a limitation with the current implementation, which is
based on line number only.
Solution:
Reimplement interactive marks as extmarks in Lua. This also make the
feature less fragile, as users can remove, add some arbitrary lines
without breaking the interactive marks.
Co-authored-by: Justin M. Keyes <justinkz@gmail.com>
Problem: [security]: path traversal issue in tar.vim
(@ax)
Solution: warn the user for such things, drop leading /, don't
forcefully overwrite files when writing temporary files,
refactor autoload/tar.vim
tar.vim: drop leading / in path names
A tar archive containing files with leading `/` may cause confusions as
to where the content is extracted. Let's make sure we drop the leading
`/` and use a relative path instead.
Also while at it, had to refactor it quite a bit and increase the
minimum supported Vim version to v9. Also add a test for some basic tar
functionality
closes: vim/vim#17733https://github.com/vim/vim/commit/87757c6b0a4b2c1f71c72ea8e1438b8fb116b239
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: [security]: path traversal issue in zip.vim (@ax)
Solution: drop leading ../ on write of zipfiles, don't forcefully
overwrite existing files
A zip plugin which contains filenames with leading '../' may cause
confusion as to where the content will be extracted. Let's drop such
things and make sure we use a relative filename instead and don't
forcefully overwrite temporary files. Also, warn the user of such
things.
related: vim/vim#17733https://github.com/vim/vim/commit/586294a04179d855c3d1d4ee5ea83931963680b8
vim-patch:e1044fb: runtime(zip): raise minimum Vim version to v9.0
vim-patch:e2d9b0d: runtime(zip): zip plugin does not work with Vim 9.0
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problems:
- Unlike in Vim, Neovim does not report pack/*/start/* in the resolved value of 'rtp' (see `:help packages-runtimepath`)
- This means that the tutor plugin cannot find the tutors in pack/*/start/*
Solution:
- Use nvim_list_runtime_paths() instead of &rtp
Problem:
With these settings, copy/pasting `blockwise-visual` (with `CTRL+V`)
incorrectly pastes as a `linewise` mode because `regtype` is ignored:
vim.opt.clipboard = 'unnamedplus'
vim.g.clipboard = 'osc52'
To reproduce: press `CTRL+V` and select some characters press `p` and
observe that it is pasted in `linewise` mode.
Solution:
Enable the [clipboard.vim](https://github.com/neovim/neovim/blob/master/runtime/autoload/provider/clipboard.vim#L281-L283))
cache for function providers, so that `regtype` is maintained for the OSC52
clipboard provider.
* Don't specify wayclip mimetype
Problem: Since wayclip 0.2, wayclip assumes UTF-8
(text/plain;charset=utf-8) in absence of an explicit mimetype.
Since Neovim sets the mimetype to "text/plain" without
specifying UTF-8, you will also have to use `-t text/plain`
when using waypaste or wayclip outside of Neovim.
Solution: Don't specify mimetype when using wayclip, thereby using the
default "text/plain:charset=utf-8".
* Add primary clipboard support to wayclip
wayclip have had support for primary clipboard for some time now.
---------
Co-authored-by: Fredrik Foss-Indrehus <fred@ffoss.net>
Problem:
The scope `elseif $LC_MESSAGES =~ '\a\a' || $LC_MESSAGES ==# "C"` in
function `s:Locale` in file `runtime/autoload/tutor.vim` leaves a case
when l:lang is not defined.
Solution:
Define `l:lang` at function scope instead of `if` scope
Problem: still some problem with the new tutors filetype plugin
Solution: refactor code to enable/disable tutor mode into
tutor#EnableInteractive() function, include a test
(Phạm Bình An)
I find it annoying that Tutor's interactive mode is always on (or debug
mode is off) even when I open a tutor file with :edit command.
I think it makes more sense to make this "interactive mode":
- Always on when it is opened with :Tutor command
- Off otherwise
For more references, see `:help` feature, it is a much better than
:Tutor, since I don't have to run `:let g:help_debug = 1` just to be able
to edit and save a help file
Therefore, I remove `g:tutor_debug`
closes: vim/vim#17299https://github.com/vim/vim/commit/13bea589a25707c8f9e29b2920410bdcccd79bc5
Co-authored-by: Phạm Bình An <phambinhanctb2004@gmail.com>
Tag folding poses a few difficulties. Many elements, e.g.
"blockquote", are always delimited by start and end tags;
end tags for some elements, e.g. "p", can be omitted in
certain contexts; void elements, e.g. "hr", have no end tag.
Although the rules for supporting omissible end tags are
ad-hoc and involved, they apply to elements in scope.
Assuming syntactical wellformedness, an end tag can be
associated with its nearest matching start tag discoverable
in scope and towards the beginning of a file, whereas all
unbalanced tags and inlined tags can be disregarded.
For example:
------------------------------------------------------------
<!DOCTYPE html>
<html lang="en"> <!-- >1 : 1 -->
<body> <!-- >2 : 2 -->
<p>Paragraph vim/vim#1. <!-- = : 2 -->
<p> <!-- >3 : 3 -->
Paragraph vim/vim#2. <!-- = : 3 -->
</p> <!-- <3 : 3 -->
<p>Paragraph vim/vim#3.</p> <!-- = : 2 -->
</body> <!-- <2 : 2 -->
</html> <!-- <1 : 1 -->
------------------------------------------------------------
(HTML comments here, "<!-- ... -->", record two values for
each folded line that are separated by ":", a value obtained
from "&foldexpr" and a value obtained from "foldlevel()".)
Innermost foldedable tags will be flattened. For example:
------------------------------------------------------------
<!DOCTYPE html>
<html lang="en"> <!-- >1 : 1 -->
<body> <!-- >2 : 2 -->
<div class="block"> <!-- >3 : 3 -->
<pre><code> <!-- >4 : 4 -->
[CODE SNIPPET] <!-- = : 4 -->
</code></pre> <!-- <4 : 4 -->
</div> <!-- <3 : 3 -->
</body> <!-- <2 : 2 -->
</html> <!-- <1 : 1 -->
------------------------------------------------------------
No folding will be requested for the "<code>"-"</code>" tag
pair and reflected by "&foldexpr" because such a fold would
have claimed the same lines that the immediate fold of the
"<pre>"-"</pre>" tag already claims.
Run-on folded tags may confuse Vim. When a file such as:
------------------------------------------------------------
<!DOCTYPE html>
<html lang="en"> <!-- >1 : 1 -->
<body> <!-- >2 : 2 -->
<div class="block"> <!-- >3 : 3 -->
<pre> <!-- >4 : 4 -->
<code> <!-- >5 : 5 -->
[CODE SNIPPET vim/vim#1] <!-- = : 5 -->
</code> <!-- <5 : 5 -->
</pre> <!-- <4 : 4 -->
</div> <!-- <3 : 3 -->
<!-- = : 3 -->
<div class="block"> <!-- >3 : 3 -->
<pre> <!-- >4 : 4 -->
<code> <!-- >5 : 5 -->
[CODE SNIPPET vim/vim#2] <!-- = : 5 -->
</code> <!-- <5 : 5 -->
</pre> <!-- <4 : 4 -->
</div> <!-- <3 : 3 -->
</body> <!-- <2 : 2 -->
</html> <!-- <1 : 1 -->
------------------------------------------------------------
is reformatted as follows:
------------------------------------------------------------
<!DOCTYPE html>
<html lang="en"> <!-- >1 : 1 -->
<body> <!-- >2 : 2 -->
<div class="block"> <!-- >3 : 3 -->
<pre> <!-- >4 : 4 -->
<code> <!-- >5 : 5 -->
[CODE SNIPPET vim/vim#1] <!-- = : 5 -->
</code> <!-- <5 : 5 -->
</pre> <!-- <4 : 4 -->
</div><div class="block"><pre><code> <!-- <3 : 3 -->
[CODE SNIPPET vim/vim#2] <!-- = : 2 ? -->
</code> <!-- <5 : 2 ? -->
</pre> <!-- <4 : 2 ? -->
</div> <!-- <3 : 2 ? -->
</body> <!-- <2 : 2 -->
</html> <!-- <1 : 1 -->
------------------------------------------------------------
"&foldexpr" values will not be used as is for the lines
between (and including) "[CODE SNIPPET vim/vim#2]" and "</div>".
(Cf. v9.1.0002.)
Having syntax highlighting in effect, tag folding using the
"fold-expr" method can be enabled with:
------------------------------------------------------------
let g:html_expr_folding = 1
------------------------------------------------------------
By default, tag folding will be redone from scratch after
each occurrence of a TextChanged or an InsertLeave event.
Such frequency may not be desired, especially for large
files, and this recomputation can be disabled with:
------------------------------------------------------------
let g:html_expr_folding_without_recomputation = 1
doautocmd FileType
------------------------------------------------------------
To force another recomputation, do:
------------------------------------------------------------
unlet! b:foldsmap
normal zx
------------------------------------------------------------
References:
https://web.archive.org/web/20250328105626/https://html.spec.whatwg.org/multipage/syntax.html#optional-tagshttps://en.wikipedia.org/wiki/Dangling_elsecloses: vim/vim#17141https://github.com/vim/vim/commit/dc7ed8f946a3109460435221ad45f92486c4ebca
Co-authored-by: Aliaksei Budavei <0x000c70@gmail.com>
Problem: Transpiled Lua code from vim9script is not amenable to static
analysis, requiring manual cleanup or ignoring parts of our codebase.
Solution: Revert to pre-rewrite version of (low-impact) legacy plugins
and remove the vim9jit shim.
Problem:
:checkhealth shows a confusing message if user sets
g:loaded_python3_provider=1.
Solution:
- Show a warning if that var is set to 1.
- Update provider modules to default to 0. Any user code that is
checking for 1, is like already broken because these may be set to 2.
Problem:
Forcing Neovim to use OSC52 for the system clipboard should be simple
and concise, since OSC52 is widely supported (Alacritty, Ghostty,
iTerm2, WezTerm, Kitty, xterm, tmux, etc.) and is the most portable
approach for syncing clipboards across SSH.
Solution:
Support g:clipboard="osc52".
This automatically downloads and uses the correct luals binary for the
currently used system. `make luals` will run luals on all lua files in
`runtime`.
We download lua-language-server manually instead of relying on
contributors downloading it on their own (like with stylua) as
lua-language-server is updated frequently which may cause unnecessary
friction. Therefore, we download a pinned version of luals which we then
can manually bump when needed. This can be re-evaluated if luals becomes
more stable in the future.
Currently this is not run when using `make lint` since cmake style "file
caching" doesn't seem possible at the moment. This is because checking a
single file doesn't seem to work.
Work on https://github.com/neovim/neovim/issues/24563.
Problem: SpotBugs compiler can be improved
Solution: runtime(compiler): Improve defaults and error handling for
SpotBugs; update test_compiler.vim (Aliaksei Budavei)
runtime(compiler): Improve defaults and error handling for SpotBugs
* Keep "spotbugs#DefaultPreCompilerTestAction()" defined but
do not assign its Funcref to the "PreCompilerTestAction"
key of "g:spotbugs_properties": there are no default and
there can only be introduced arbitrary "*sourceDirPath"
entries; therefore, this assignment is confusing at best,
given that the function's implementation delegates to
whatever "PreCompilerAction" is.
* Allow for the possibility of relative source pathnames
passed as arguments to Vim for the Javac default actions,
and the necessity to have them properly reconciled when
the current working directory is changed.
* Do not expect users to remember or know that new source
files ‘must be’ ":argadd"'d to be then known to the Javac
default actions; so collect the names of Java-file buffers
and Java-file Vim arguments; and let users providing the
"@sources" file-lists in the "g:javac_makeprg_params"
variable update these file-lists themselves.
* Strive to not leave behind a fire-once Syntax ":autocmd"
for a Java buffer whenever an arbitrary pre-compile action
errors out.
* Only attempt to run a post-compiler action in the absence
of failures for a pre-compiler action. Note that warnings
and failures are treated alike (?!) by the Javac compiler,
so when previews are tried out with "--enable-preview",
remember about passing "-Xlint:-preview" too to also let
SpotBugs have a go.
* Properly group conditional operators when testing for key
entries in a user-defined variable.
* Also test whether "javaExternal" is defined when choosing
an implementation for source-file parsing.
* Two commands are provided to toggle actions for buffer-local
autocommands:
- SpotBugsRemoveBufferAutocmd;
- SpotBugsDefineBufferAutocmd.
For example, try this from "~/.vim/after/ftplugin/java.vim":
------------------------------------------------------------
if exists(':SpotBugsDefineBufferAutocmd') == 2
SpotBugsDefineBufferAutocmd BufWritePost SigUSR1
endif
------------------------------------------------------------
And ":doautocmd java_spotbugs User" can be manually used at will.
closes: vim/vim#16140https://github.com/vim/vim/commit/368ef5a48c7a41af7fe2c32a5d5659e23aff63d0
Co-authored-by: Aliaksei Budavei <0x000c70@gmail.com>
Dr. Chip retired some time ago and is no longer maintaining the netrw
plugin. However as a runtime plugin distributed by Vim, it important to
maintain the netrw plugin in the future and fix bugs as they are
reported.
So, split out the netrw plugin as an additional package, however include
some stubs to make sure the plugin is still loaded by default and the
documentation is accessible as well.
closes: vim/vim#16368https://github.com/vim/vim/commit/9cfdabb074feefc9848e9f7a4538f201e28c7f06
Co-authored-by: Luca Saccarola <github.e41mv@aleeas.com>
We currently enable the OSC 52 clipboard provider by setting g:clipboard
when a list of conditions are met, one of which is that $SSH_TTY must be
set. We include this condition because often OSC 52 is not the best
clipboard provider, so if there are "local" providers available Nvim
should prefer those over OSC 52.
However, if no other providers are available, Nvim should use OSC 52
even when $SSH_TTY is not set. When a user is in an SSH session then the
checks for the other clipboard providers will still (typically) fail, so
OSC 52 continues to be enabled by default in SSH sessions.
This is marked as a breaking change because there are some cases where
OSC 52 wasn't enabled before and is now (or vice versa).
These changes enable tar.vim to keep permissions of files that were
edited intact instead of replacing them with the default permissions.
The major change for this is switching from "tar -OPxf", which reads out
the contents of the selected file from an tar archive to stdout to
"tar -pPxf" which extracts the selected file to the current directory
with permissions intact
This requirs the temporary directory to be created earlier.
closes: vim/vim#7379https://github.com/vim/vim/commit/129a8446d23cd9cb4445fcfea259cba5e0487d29
Co-authored-by: Lennart00 <73488709+Lennart00@users.noreply.github.com>
