Problem: No clear way to check whether parsers are available for a given
language.
Solution: Make `language.add()` return `true` if a parser was
successfully added and `nil` otherwise. Use explicit `assert` instead of
relying on thrown errors.
Problem: Language names are only registered for filetype<->language
lookups when parsers are actually loaded; this means users cannot rely
on `vim.treesitter.language.get_lang()` or `get_filetypes()` to return
the correct value when language and filetype coincide and always need to
add explicit fallbacks.
Solution: Always return the language name as valid filetype in
`get_filetypes()`, and default to the filetype in `get_lang()`. Document
this behavior.
Problem:
Headings in :help do not stand out visually.
Solution:
Define a non-standard `@markup.heading.1.delimiter` group and
special-case it in `highlight_group.c`.
FUTURE:
This is a cheap workaround until we have #25718 which will enable:
- fully driven by `vimdoc/highlights.scm` instead of using highlight
tricks (`guibg=bg guifg=bg guisp=fg`)
- better support of "cterm" ('notermguicolors')
In the api_info() output:
:new|put =map(filter(api_info().functions, '!has_key(v:val,''deprecated_since'')'), 'v:val')
...
{'return_type': 'ArrayOf(Integer, 2)', 'name': 'nvim_win_get_position', 'method': v:true, 'parameters': [['Window', 'window']], 'since': 1}
The `ArrayOf(Integer, 2)` return type didn't break clients when we added
it, which is evidence that clients don't use the `return_type` field,
thus renaming Dictionary => Dict in api_info() is not (in practice)
a breaking change.
Problem:
The default builtin UI client does not declare its client info. This
reduces discoverability and makes it difficult for plugins to identify
the UI.
Solution:
- Call nvim_set_client_info after attaching, as recommended by `:help dev-ui`.
- Also set the "pid" field.
- Also change `ui_active()` to return a count. Not directly relevant to
this commit, but will be useful later.
Problem:
User cannot configure the tool used by `vim.ui.open` (or `gx`). With
netrw this was supported by `g:netrw_browsex_viewer`.
Solution:
Introduce `opts.cmd`. Users that want to set this globally can
monkey-patch `vim.ui.open` in the same way described at `:help vim.paste()`.
Fixes https://github.com/neovim/neovim/issues/29488
Co-authored-by: Justin M. Keyes <justinkz@gmail.com>
Problem: vim.tbl_deep_extend had an undocumented feature where arrays
(integer-indexed tables) were not merged but compared literally (used
for merging default and user config, where one list should overwrite the
other completely). Turns out this behavior was relied on in quite a
number of plugins (even though it wasn't a robust solution even for that
use case, since lists of tables (e.g., plugin specs) can be array-like
as well).
Solution: Revert the removal of this special feature. Check for
list-like (contiguous integer indices) instead, as this is closer to the
intent. Document this behavior.
- The exclusion of lists was never justified in the commit history and is
the wrong thing to do for a function that deals with tables.
- Move the error checks out of the recursive path.
Fixes#23654
Problem:
`nvim --listen` does not error on EADDRINUSE. #30123
Solution:
Now that `$NVIM_LISTEN_ADDRESS` is deprecated and input *only* (instead
of the old, ambiguous situation where it was both an input *and* an
output), we can be fail fast instead of trying to "recover". This
reverts the "recovery" behavior of
704ba4151e, but that was basically
a workaround for the fragility of `$NVIM_LISTEN_ADDRESS`.
For context, see https://github.com/neovim/neovim/pull/24738. Before
that PR, Nvim did not correctly handle captures with quantifiers. That
PR made the correct behavior opt-in to minimize breaking changes, with
the intention that the correct behavior would eventually become the
default. Users can still opt-in to the old (incorrect) behavior for now,
but this option will eventually be removed completely.
BREAKING CHANGE: Any plugin which uses `Query:iter_matches()` must
update their call sites to expect an array of nodes in the `match`
table, rather than a single node.
Use the grapheme break algorithm from utf8proc to support grapheme
clusters from recent unicode versions.
Handle variant selector VS16 turning some codepoints into double-width
emoji. This means we need to use ptr2cells rather than char2cells when
possible.
Problem: Some items of completion results include function signatures that can
cause the pum to be very long when a function has many params, because pum
scales with the longest word/abbr.
Solution: add custom covert function that can customise abbr to remove params.
Problem: Contents of terminal buffer are not reflown when Nvim is
resized.
Solution: Enable reflow in libvterm by default. Now that libvterm is
vendored, also fix "TUI rapid resize" test failures there.
Note: Neovim's scrollback buffer does not support reflow (yet), so lines
vanishing into the buffer due to a too small window will be restored
without reflow.
Problem:
`'scrollbind'` does not work properly if the window being scrolled
automatically contains any filler/virtual lines (except for diff filler
lines).
This is because when the scrollbind check is done, the logic only
considers changes to topline which are represented as line numbers.
Solution:
Write the logic for determine the scroll amount to take into account
filler/virtual lines.
Fixes#29751
This is identical to `named_node_for_range` except that it includes
anonymous nodes. This maintains consistency in the API because we
already have `descendant_for_range` and `named_descendant_for_range`.
Problem:
Empty dictionaries are converted into typed tables of the form `{ [true]
= 6}` instead of an empty dictionary representation `{}`. This leads to
incorrect table representation, along with failure in JSON encoding of
such tables as currently tables with only string and number type keys
can be encoded.
Solution:
The typed table logic has been removed from `nlua_push_Dictionary`. The
typed table logic is required only for float value conversions which is
already handled in `nlua_push_Float`. So, it is(was) no longer required
here.
Fixesneovim/neovim#29218
Problem: moving in the buffer list doesn't work as documented
(SenileFelineS)
Solution: Skip non-help buffers, when run from normal buffers, else
only move from help buffers to the next help buffer (LemonBoy)
As explained in the help section for :bnext and :bprev the commands
should jump from help buffers to help buffers (and from regular ones to
regular ones).
fixes: vim/vim#4478closes: vim/vim#15198893eeeb445
Co-authored-by: LemonBoy <thatlemon@gmail.com>
This is a breaking change which will make refactor of typval and shada
code a lot easier. In particular, code that would use or check for
v:msgpack_types.binary in the wild would be broken. This appears to be
rarely used in existing plugins.
Also some cases where v:msgpack_type.string would be used to represent a
binary string of "string" type, we use a BLOB instead, which is
vimscripts native type for binary blobs, and already was used for BIN
formats when necessary.
msgpackdump(msgpackparse(data)) no longer preserves the distinction
of BIN and STR strings. This is very common behavior for
language-specific msgpack bindings. Nvim uses msgpack as a tool to
serialize its data. Nvim is not a tool to bit-perfectly manipulate
arbitrary msgpack data out in the wild.
The changed tests should indicate how behavior changes in various edge
cases.
Suggest adding them to news.txt instead.
Also don't ignore changes to intro.txt and sponsor.txt, as they don't
change much these days, and it's necessary to consider whether to
include their changes in Nvim's intro.txt.
Problem: Current instance of last search pattern not easily spotted.
Solution: Add CurSearch highlighting. (closesvim/vim#10133)
a43993897a
Some code is superseded by later patches that are already ported.
Co-authored-by: LemonBoy <thatlemon@gmail.com>
Problem: A custom 'statuscolumn' needs to check a bunch of options and
placed signs to replicate the default number column.
Solution: Rework %l item to include the necessary logic to mimic the
default number column. Remove now redundant %r item.
When libvterm receives the OSC 52 escape sequence it ignores it because
Nvim does not set any selection callbacks. Install selection callbacks
that forward to the clipboard provider, so that setting the clipboard
with OSC 52 in the embedded terminal writes to the system clipboard
using the configured clipboard provider.
Problem: There is no easy way to configure the behavior of the default
diagnostic "jump" mappings. For example, some users way want to show the
floating window, and some may not (likewise, some way want to only move
between warnings/errors, or disable the "wrap" parameter).
Solution: Add a "jump" table to vim.diagnostic.config() that sets
default values for vim.diagnostic.jump().
Alternatives: Users can override the default mappings to use the exact
options to vim.diagnostic.jump() that they want, but this has a couple
issues:
- While the default mappings are not complicated, they are also not
trivial, so overriding them requires users to understand
implementation details (specifically things like setting "count"
properly).
- If plugins want to change the default mappings, or configure the
behavior in any way (e.g. floating window display), it becomes even
harder for users to tweak specific behavior.
vim.diagnostic.config() already works quite well as the "entry point"
for tuning knobs with diagnostic UI elements, so this fits in nicely and
composes well with existing mental models and idioms.
In command_line_scan() for MSWIN, expand "~\" or "~/" prefixed paths to
the USERPROFILE environment variable for the user's profile directory.
Fix#23901
Signed-off-by: Rafael Kitover <rkitover@gmail.com>
Problem: `CompleteDone` currently does not specify the reason for why completion was done, which is problematic for completion plugins as they cannot know whether the event was triggered due to the completion being canceled, accepted, or for some other reason.
Solution: Add a `reason` key to `v:event`, which is set by `CompleteDone` to indicate why completion ended.
Problem:
Higher-priority signs may be hidden by lower-priority signs.
Solution:
Place higher-priority signs from the left.
Example:
nvim_buf_set_extmark(0, ns, 0, -1, {sign_text='H', priority=1})
nvim_buf_set_extmark(0, ns, 0, -1, {sign_text='W', priority=2})
nvim_buf_set_extmark(0, ns, 0, -1, {sign_text='E', priority=3})
Before:
| |
H | W E |
^ | |
Not visible
After:
| |
| E W | H
| | ^
Not visible
Fixes#16632
Problem:
`vim.rpcnotify(0)` and `rpcnotify(0)` are documented as follows:
If {channel} is 0, the event is broadcast to all channels.
But that's not actually true. Channels must call `nvim_subscribe` to
receive "broadcast" events, so it's actually "multicast".
- Assuming there is a use-case for "broadcast", the current model adds
an extra step for broadcasting: all channels need to "subscribe".
- The presence of `nvim_subscribe` is a source of confusion for users,
because its name implies something more generally useful than what it
does.
Presumably the use-case of `nvim_subscribe` is to avoid "noise" on RPC
channels not expected a broadcast notification, and potentially an error
if the channel client reports an unknown event.
Solution:
- Deprecate `nvim_subscribe`/`nvim_unsubscribe`.
- If applications want to multicast, they can keep their own multicast
list. Or they can use `nvim_list_chans()` and `nvim_get_chan_info()`
to enumerate and filter the clients they want to target.
- Always send "broadcast" events to ALL channels. Don't require channels
to "subscribe" to receive broadcasts. This matches the documented
behavior of `rpcnotify()`.
