Problem:
str_byteindex_enc could return an error if the index was longer than the
lline length. This was handled in each of the calls to it individually
Solution:
* Fix the call at the source level so that if the index is higher than
the line length, line length is returned as per LSP specification
* Remove pcalls on str_byteindex_enc calls. No longer needed now that
str_byteindex_enc has a bounds check.
`buf.code_action` always included diagnostics on a given line from all
clients. Servers should only receive diagnostics they published, and in
the exact same format they sent it.
Should fix https://github.com/neovim/neovim/issues/29500
(cherry picked from commit 720b309c78)
Problem: :TOhtml doesn't properly handle virtual text when it has
multiple highlight groups. It also improperly calculates position offset
for multi-byte virt_text characters.
Solution: Apply the `vim.api.nvim_strwidth` broadly to properly
calculate character offset, and handle the cases where the `hl` argument
can be a table of multiple hl groups.
Problem:
When there are multiple inlay hints present at the same position, they
should be rendered in the order they are received in the response from
LSP as per the LSP spec. Currently, this is not respected.
Solution:
Gather all hints for a given position, and then set it in a single
extmark call instead of multiple set_extmark calls. This leads to fewer
extmark calls and correct inlay hints being rendered.
Problem: if on_lines is called before the LSP is initialized, the buffer
is detached.
Solution: check for uninitialized clients before detaching.
(cherry picked from commit 292365fa1b)
Co-authored-by: Ilia Choly <ilia.choly@gmail.com>
Problem:
The file watcher backends for Linux have too many limitations and
doesn't work reliably.
Solution:
disable didChangeWatchedFiles on Linux
Ref: #27807, #28058, #23291, #26520
Problem:
Inlay hints `enable()` does not fully implement the `:help dev-lua` guidelines:
Interface conventions ~
- When accepting a buffer id, etc., 0 means "current buffer", nil means "all
buffers". Likewise for window id, tabpage id, etc.
- Examples: |vim.lsp.codelens.clear()| |vim.diagnostic.enable()|
Solution:
Implement globally enabling inlay hints.
* refactor(lsp): do not rely on `enable` to create autocmds
* refactor(lsp): make `bufstates` a defaulttable
* refactor(lsp): make `bufstate` inherit values from `globalstate`
* feat(lsp): `vim.lsp.inlay_hints` now take effect on all buffers by default
* test(lsp): add basic tests for enable inlay hints for all buffers
* test(lsp): add test cases cover more than one buffer
Specifically, functions that are run in the context of the test runner
are put in module `test/testutil.lua` while the functions that are run
in the context of the test session are put in
`test/functional/testnvim.lua`.
Closes https://github.com/neovim/neovim/issues/27004.
Problem:
We need to establish a pattern for `enable()`.
Solution:
- First `enable()` parameter is always `enable:boolean`.
- Update `vim.diagnostic.enable()`
- Update `vim.lsp.inlay_hint.enable()`.
- It was not released yet, so no deprecation is needed. But to help
HEAD users, it will show an informative error.
- vim.deprecate():
- Improve message when the "removal version" is a *current or older* version.
This reverts commit 4382d2ed56.
The story for this feature was left in an incomplete state. It was never
the intention to unilaterally fold all information, only the ones that
did not contain relevant information. This feature does more harm than
good in its incomplete state.
`exec_lua` makes code slighly harder to read, so it's beneficial to
remove it in cases where it's possible or convenient.
Not all `exec_lua` calls should be removed even if the test passes as it
changes the semantics of the test even if it happens to pass.
From https://github.com/neovim/neovim/pull/28155#discussion_r1548185779:
"Note for tests like this, which fundamentally are about conversion, you
end up changing what conversion you are testing. Even if the result
happens to be same (as they often are, as we like the rules to be
consistent if possible), you are now testing the RPC conversion rules
instead of the vim script to in-process lua conversion rules."
From https://github.com/neovim/neovim/pull/28155#discussion_r1548190152:
"A test like this specifies that the cursor is valid immediately and not
after a separate cycle of normal (or an other input-processing) mode."
Problem:
LSP basic_finish test modified in #27899 is flaky again after #28030.
Solution:
Run on_setup() immediately after setup using a before_init callback.
This is the first installment of a multi-PR series significantly
refactoring how highlights are being specified.
The end goal is to have a base set of 20 ish most common highlights,
and then specific files only need to add more groups to that as needed.
As a complicating factor, we also want to migrate to the new default
color scheme eventually. But by sharing a base set, that future PR
will hopefully be a lot smaller since a lot of tests will be migrated
just simply by updating the base set in place.
As a first step, fix the anti-pattern than Screen defaults to ignoring
highlights. Highlights are integral part of the screen state, not
something "extra" which we only test "sometimes". For now, we still
allow opt-out via the intentionally ugly
screen._default_attr_ids = nil
The end goal is to get rid of all of these eventually (which will be
easier as part of the color scheme migration)
Problem:
As mentioned in #23002 on_setup and on_init are run concurrently.
However, in basic_finish tests on_setup must attach the client before
on_init finishes. The other basic_finish test isn't flaky because it
makes an RPC request in on_init.
Solution:
Don't use on_setup in basic_finish tests.
Problem: "NOTE"s, inline Vim script code, and links ending in digits may not be
highlighted correctly within the :Tutor.
Solution: set an explicit value for ":syntax iskeyword" that includes digits. Do
it after ":syntax include"s, so the included syntax/sh.vim doesn't mess with the
value.
Increase screen test width so all text within the conclusion section is visible.
Co-authored-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Added the following LSP semantic token types to be linked to highlight
groups by default:
* @lsp.type.event
* @lsp.type.keyword
* @lsp.type.modifier
* @lsp.type.number
* @lsp.type.operator
* @lsp.type.regexp
* @lsp.type.string
Problem:
`vim.lsp.util.rename()` deletes the buffers that are affected by
renaming. This has undesireable side effects. For example, when renaming
a directory, all buffers under that directory are deleted and windows
displaying those buffers are closed. Also, buffer options may change
after renaming.
Solution:
Rename the buffers with :saveas.
An alternative approach is to record all the relevant states and restore
it after renaming, but that seems to be more complex. In fact, the older
version was attempting to restore the states but only partially and
incorrectly.
Problem:
vim._watch.watchdirs has terrible performance.
Solution:
- On linux use fswatch as a watcher backend if available.
- Add File watcher section to health:vim.lsp. Warn if watchfunc is
libuv-poll.
Previously rename would unconditionally read the to-be-renamed file from the
disk and write it to the disk. This is redundant in some cases
If the file is not already loaded, it's not attached to lsp client, so nvim
doesn't need to care about this file.
If the file is loaded but has no change, it doesn't need to be written.
