Problem: The swapfile attention message is not repeated after clearing
the screen.
After clearing the screen `msg_scrolled` is reset without
clearing other related variables, causing an assert.
Solution: Make the attention message part of the confirm prompt.
Call `msg_reset_scroll()`.
Problem: Since 48e2a736, prompt messages are handled by an actual
active cmdline, resulting in `State` no longer being equal
to `MODE_CONFIRM` which is used in some places. E.g. to
specify the current `mode()` or to re-emit a confirm message.
Solution: Replace `MODE_CONFIRM` with a new `MODE_CMDLINE` sub-mode when
`ccline.one_key/mouse_used` is set. Use it to avoid clearing
mouse_used prompt messages, and to re-emit one_key messages
(when ext_messages is inactive, for which this is unnecessary).
Problem: Blockwise Visual selection not redrawn correctly when moving
cursor for more than 1 cells with 'virtualedit'.
Solution: Restore the curswant update removed in 6679687bb3.
Problem: Ruler is not cleared from the screen/ext_messages state when
it is no longer drawn after e.g. `set noruler` or when moving
from a floating to a regular window.
Solution: Remember if ruler was drawn and clear it.
Problem: Wrong winline info after partial redraw. Setting
`conceal_cursor_used` is unnecessarily spread out.
Solution: Rather than adjusting `wl_lastlnum` for the previous
winline, adjust it when setting the current winline.
Set `conceal_cursor_used` when the current window is redrawn.
Problem: Line number corrected for conceal_lines may be set beyond eob
when the last buffer line is concealed, causing ml_get errors.
Solution: Avoid setting line number beyond eob.
Problem: Logic computing the new height of the modified area does not
take into account virtual lines attached to a folded line.
Solution: Remove `hasFolding()` branch and let `plines_win_full()` do its job.
Problem: Since 3cb1e825, all windows with 'statuscolumn' set, and a
resized 'signcolumn' for a particular buffer are marked
to be fully redrawn when the first window is encountered.
The "resized" variable is only unset after all windows have
been drawn, so this results in windows that have just been
draw to be marked for redraw again, even though the
signcolumn did not change size again.
Solution: Replace the `resized` variable with a `last_max` variable that
is changed when the first window into buf is encountered.
Problem: Marks that go beyond the end of the buffer, and paired marks
whose end is in front of its start mark are added to and
removed from the decor. This results in incorrect tracking
of the signcolumn.
Solution: Ensure such marks are not added to and removed from the decor.
Problem: Skipping over a concealed line for which `win_line()`
_should_ be called because it has `virt_lines_above = false`
lines associated with it.
Solution: Don't include such a line in `wl_lastlnum` from the line
above.
Problem: Last line in a window does not store correct `wl_lastlnum` if
lines below it are concealed (resulting in e.g. incorrect
cursor row).
Solution: Increment `wl_lastlnum` while it points to a line above a
concealed line.
Problem: Match highlighting marks a buffer region to be redrawn as if
its buffer text was changed, unnecessarily invoking syntax code.
Solution: Set the `w_redraw_top/bot` variables instead of the b_mod_* ones
(Luuk van Baal)
7bbb0f357e
Problem: `cmdline_show` is emitted unnecessarily each event
loop iteration, because `cmdline_was_last_drawn` is never set.
Solution: Keep track of whether the cmdline was last drawn to avoid
unnecessarily emitting cmdline_show. Set `redraw_state` to
emit `cmdline_pos` when emitting `CursorMovedC`. Only emit
`cmdline_pos` when cmdline was last drawn.
Problem: Combined highlighting was not applied to nvim_eval_statusline(),
and 'statuscolumn' sign segment/numhl highlights.
Solution: Add an additional `groups` element to the return value of
`nvim_eval_statusline()->highlights`. This is an array of stacked
highlight groups (highest priority last). Also resolve combined
highlights for the 'statuscolumn' sign segment/numhl highlights.
Expose/synchronize some drawline.c logic that is now mimicked in
three different places.
Problem: too many strlen() calls in screen.c
Solution: refactor screen.c and remove calls to strlen(),
verify that leadmultispace != NULL (John Marriott)
closes: vim/vim#16460c15de972e8
Co-authored-by: John Marriott <basilisk@internode.on.net>
Problem: too many strlen() calls in drawscreen.c
Solution: refactor drawscreen.c and remove calls to strlen(),
make get_keymap_str() (in screen.c) return string length
instead of TRUE/FALSE (John Marriott).
a21240b97d
Co-authored-by: John Marriott <basilisk@internode.on.net>
Problem: the max value of 'cmdheight' is limited by other tabpages
Solution: Limit the maximum value of 'cmdheight' to the current tabpage only.
(Milly)
The Help says that cmdheight is local to the tab page, but says nothing
about the maximum value depending on the state of all tab pages. Users
may wonder why they can't increase cmdheight when there are still rows
available on the current tab page. This PR changes the behavior of
cmdheight so that its maximum value depends only on the state of the
current tab page.
Also, since magic numbers were embedded in various places with the
minimum value of cmdheight being 1, we defined a constant to make it
easier to understand.
closes: vim/vim#161312cddf0e85a
Cherry-pick Test_cmdheight_not_changed() from patch 9.0.0187.
Co-authored-by: Milly <milly.ca@gmail.com>
Problem: Possible unnecessary redraw after adding/deleting lines.
Solution: Check b_mod_set before using b_mod_xlines to avoid using stale
b_mod_xlines value (zeertzjq).
closes: vim/vim#161249f25a3a237
Problem: Hit double grid_line_start() assert when redrawing from
ext_messages msg_ruler event.
Solution: Do not start() batched grid calls when win_redr_ruler() will not
puts() anything.
Problem: Option metadata like list of valid values for an option and
option flags are not listed in the `options.lua` file and are instead
manually defined in C, which means option metadata is split between
several places.
Solution: Put metadata such as list of valid values for an option and
option flags in `options.lua`, and autogenerate the corresponding C
variables and enums.
Supersedes #28659
Co-authored-by: glepnir <glephunter@gmail.com>
Problem: Highlight group id is not propagated to the end of the message call
stack, where ext_messages are emitted.
Solution: Refactor message functions to pass along highlight group id
instead of attr id.
Problem: Wrong display when typing in diff mode with 'smoothscroll'.
Solution: Use adjust_plines_for_skipcol() (zeertzjq).
closes: vim/vim#1577647f8584a80
Problem: Window is updated with potentially invalid skipcol in recursive
window update path. I.e. cursor outside of visible range in
large line that does not fit.
Solution: Make sure it is valid (Luuk van Baal).
3d5065fc75
Problem:
Variables are often assigned multiple places in common patterns.
Solution:
Replace these common patterns with different patterns that reduce the
number of assignments.
Use `MAX` and `MIN`:
```c
if (x < y) {
x = y;
}
// -->
x = MAX(x, y);
```
```c
if (x > y) {
x = y;
}
// -->
x = MIN(x, y);
```
Use ternary:
```c
int a;
if (cond) {
a = b;
} els {
a = c;
}
// -->
int a = cond ? b : c;
```
Problem: CurSearch highlight is often wrong.
Solution: Remember the last highlighted position and redraw when needed.
368137aa52
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Unsetting global variables earlier in #28578 to avoid
recursiveness, caused superfluous or even unlimited
showmode().
Solution: Partly revert #28578 so that the globals are unset at the end
of showmode(), and avoid recursiveness for ext UI by adding a
recursive function guard to each generated UI call that may
call a Lua callback.
Problem: Numberwidth may depend on number of signs with text in the
buffer and is not handled correctly for extmark signs.
Solution: Move legacy sign code for changed numberwidth so that it is
handled properly for legacy and extmark signs alike.
Problem: there is missing default title highlight when highlight not defined in title text chunk.
Solution: when attr is not set use default title highlight group.
Experimental and subject to future changes.
Add a way to redraw certain elements that are not redrawn while Nvim is waiting
for input, or currently have no API to do so. This API covers all that can be
done with the :redraw* commands, in addition to the following new features:
- Immediately move the cursor to a (non-current) window.
- Target a specific window or buffer to mark for redraw.
- Mark a buffer range for redraw (replaces nvim__buf_redraw_range()).
- Redraw the 'statuscolumn'.
Problem: Calling :redraw from vim.ui_attach() callback results in
recursive cmdline/message events.
Solution: Avoid recursiveness where possible and replace global "call_buf"
with separate, temporary buffers for each event so that when a Lua
callback for one event fires another event, that does not result
in invalid memory access.
Problem: Calculating line height for unnecessary amount of lines with
half-page scrolling (zhscn, after 9.1.0280)
Solution: Replace "limit_winheight" argument with higher resolution
"max" argument to which to limit the calculated line height
in plines_m_win() to (Luuk van Baal)
32d701f51b
Instead of randomly disappearing because some random event might have
caused mid_start or bot_scroll_start to randomly take a low value, treat
intro message as a _first class stateful_ thing.
This means that intro message will kept being _redrawn_ as long as we
are in the state it should be shown. This also includes screen resizes.
you will not lose the intro message because there was a delay in
detecting terminal features.
A lot of functions in move.c only worked for curwin, alternatively
took a `wp` arg but still only work if that happens to be curwin.
Refactor those that are needed for update_topline(wp) to work
for any window.
fixes#27723fixes#27720
Problem: infinite loop in win_update with 'smoothscroll' set when
window width is equal to textoff, or signed integer overflow
if smaller.
Solution: don't revalidate wp->w_skipcol in that case, as no buffer text
is being shown. (Sean Dewar)
02fcae02a9
Test_window_split_no_room changes were already cherry-picked earlier.
Problem: the amount of available space (v:echospace) on the command
line is not correct when showcmdloc is drawn into the
statusline or tabline.
Solution: only add SHOWCMD_COLS to the shown command column when
'showcmdloc' is set to last (Sam-programs)
closes: vim/vim#14108062141b1a7
Co-authored-by: Sam-programs <130783534+Sam-programs@users.noreply.github.com>
vim-patch:9.1.0100: Redrawing can be improved with undo and 'spell'
Problem: When undoing with 'spell', redrawWinline() is called after
changed_lines(), while later win_update() sets redraw type to
UPD_NOT_VALID, even though w_redraw_top and w_redraw_bot are
still valid.
Solution: Only set redraw type to UPD_NOT_VALID when inserting/deleting
lines after parts of window has pending redraw, i.e., when
changed_lines() is called after redrawWinline().
(zeertzjq)
closes: vim/vim#14019f2d90a3511
Problem: Mechanism to prevent recursive screen updating is incomplete.
Solution: Add "redraw_not_allowed" and set it in build_stl_str_hl().
(issue vim/vim#10952)
471c0fa3ee
Co-authored-by: Bram Moolenaar <Bram@vim.org>
