Problem: nvim_win_set_config does not handle failure in win_split_ins properly
yet, which can cause all sorts of issues. Also nvim_open_win and
nvim_win_set_config do not set the error message to the one from win_split_ins.
Solution: handle failure by undoing winframe_remove, like in win_splitmove.
Make sure autocommands from switching to the altwin fire within a valid window,
and ensure they don't screw things up. Set the error message to that of
win_split_ins, if any.
Also change a few other small things, including:
- adjust win_append to take a tabpage_T * argument, which is more consistent
with win_remove (and also allows us to undo a call to win_remove).
- allow winframe_restore to restore window positions. Useful if `wp` was in a
different tabpage, as a call to win_comp_pos (which only works for the current
tabpage) after winframe_restore should no longer be needed.
Though enter_tabpage calls win_comp_pos anyway, this has the advantage of
ensuring w_winrow/col remains accurate even before entering the tabpage
(useful for stuff like win_screenpos, if used on a window in another tabpage).
(This change should probably also be PR'd to Vim later, even though it doesn't
use winframe_restore for a `wp` in a different tabpage yet).
Problem: nvim_open_win blocking all win_set_buf autocommands when !enter &&
!noautocmd is too aggressive.
Solution: temporarily block WinEnter/Leave and BufEnter/Leave events when
setting the buffer. Delegate the firing of BufWinEnter back to win_set_buf,
which also has the advantage of keeping the timing consistent (e.g: before the
epilogue in enter_buffer, which also handles restoring the cursor position if
autocommands didn't change it, among other things). Reword the documentation for
noautocmd a bit.
I pondered modifying do_buffer and callees to allow for BufEnter/Leave being
conditionally disabled, but it seems too invasive (and potentially error-prone,
especially if new code paths to BufEnter/Leave are added in the future).
Unfortunately, doing this has the drawback of blocking ALL such events for the
duration, which also means blocking unrelated such events; like if window
switching occurs in a ++nested autocmd fired by win_set_buf. If this turns out
to be a problem in practice, a different solution specialized for nvim_open_win
could be considered. :-)
Problem: currently, for splits, nvim_win_set_config accepts win without any of
split or vertical set, which has little effect and seems error-prone.
Solution: require at least one of split or vertical to also be set for splits.
Also, update nvim_win_set_config docs, as it's no longer limited to just
floating and external windows.
Problem: splitting is disallowed in some cases to prevent the window layout
changes while a window is closing, but it's not checked for.
Solution: check for this, and set the API error message directly.
(Also sneak in a change to tui.c that got lost from #27352; it's a char* buf,
and the memset is assuming one byte each anyway)
Problem: WinNew and win_enter autocommands can delete the target buffer to
switch to, causing a heap-use-after-free.
Solution: store a bufref to the buffer, check it before attempting to switch.
Problem: if switch_win{_noblock} fails to restore the old curwin after WinNew
(e.g: it was closed), wp will become the new curwin, but win_set_buf enter
events would still be blocked if !enter && !noautocmd.
Solution: fire them, as we've actually entered the new window.
Note: there's a problem of switch_win{_noblock} failing to restore the old
curwin, leaving us in wp without triggering WinEnter/WinLeave, but this affects
all callers of switch_win{_noblock} anyways. (It's also not clear how WinLeave
can be called if the old curwin was closed already).
Problem: BufWinEnter is not fired when not entering a new window, even when a
different buffer is specified and buffer-related autocommands are unblocked
(!noautocmd).
Solution: fire it in the context of the new window and buffer. Do not do it if
the buffer is unchanged, like :{s}buffer.
Be wary of autocommands! For example, it's possible for nvim_win_set_config to
be used in an autocommand to move a window to a different tabpage (in contrast,
things like wincmd T actually create a *new* window, so it may not have been
possible before, meaning other parts of Nvim could assume windows can't do
this... I'd be especially cautious of logic that restores curwin and curtab
without checking if curwin is still valid in curtab, if any such logic exists).
Also, bail early from win_set_buf if setting the temp curwin fails; this
shouldn't be possible, as the callers check that wp is valid, but in case that's
not true, win_set_buf will no longer continue setting a buffer for the wrong
window.
Note that pum_create_float_preview also uses win_set_buf, but from a glance,
doesn't look like it properly checks for autocmds screwing things up (win_enter,
nvim_create_buf...). I haven't addressed that here.
Also adds some test coverage for nvim_open_win autocommands.
Closes#27121.
Problem: win_set_config should have the observable effect of moving an existing
window to another place, but instead fires autocommands as if a new window was
created and entered (and does not fire autocommands reflecting a "return" to the
original window).
Solution: do not fire win_enter-related autocommands when splitting the window,
but continue to fire them when entering the window that fills the new space when
moving a window to a different tabpage, as the new curwin changes.
Also, remove "++once" from the WinEnter autocmd in the other test, as omitting
it also crashed Nvim before this fix.
Problem: win_enter autocommands can close new_curwin, crashing if it was the
last window in its tabpage after removing win, or can close parent, crashing
when attempting to split it later.
Solution: remove win first, check that parent is valid after win_enter.
NOTE: This isn't actually quite right, as this means win is not in the window
list or even has a frame when triggering enter autocommands (so it's not
considered valid in the tabpage). This is addressed in later commits.
Problem: Things that temporarily change/restore curwin/buf (e.g:
win_execute, some autocmds) may break assumptions that
curwin/buf is the cmdwin when "cmdwin_type != 0", causing
issues.
Solution: Expose the cmdwin's real win/buf and check that instead. Also
try to ensure these variables are NULL if "cmdwin_type == 0",
allowing them to be used directly in most cases without
checking cmdwin_type. (Sean Dewar)
Reset and save `cmdwin_old_curwin` in a similar fashion.
Apply suitable changes for API functions and add Lua tests.
988f74311c
This is the command invoked repeatedly to make the changes:
:%s/^\(.*\)|\%(\*\(\d\+\)\)\?$\n\1|\%(\*\(\d\+\)\)\?$/\=submatch(1)..'|*'..(max([str2nr(submatch(2)),1])+max([str2nr(submatch(3)),1]))/g
This aligns its behaviour better with `nvim_win_close`.
Note that `:hide` is actually incapable of closing the cmdwin, unlike `:close`
and `:quit`, so this is a bit of a difference in behaviour.
Disallow closing the previous window from `nvim_win_close`, as this will cause
issues.
Again, no telling how safe this is. It also requires exposing old_curwin. :/
Also note that it's possible for the `&cmdheight` to change if, for example,
there are 2 tabpages and `nvim_win_close` is used to close the last window in
the other tabpage while `&stal` is 1. This is addressed in a later commit.
Problem: As discussed on Matrix, there was some interest in having
`nvim_open_win` again be able to open floats in the cmdwin (e.g: displaying a
hover doc related to what's in the cmdwin). After #23228, this was disallowed.
Solution: Allow `nvim_open_win` in the cmdwin as long as `!enter` and
`buffer != curbuf` (the former can cause all sorts of issues, and the latter
can crash Nvim after closing cmdwin). Also allow `nvim_win_set_buf` in a similar
fashion.
Note that we're not *entirely* sure if this is 100% safe (cmdwin is a
global-state-using-main-loop-calling beast), but this seems to work OK..?
Also:
- Check the buffer argument of `nvim_open_win` earlier, and abort if it's
invalid (it used to still open a window in this case).
- Untranslate `e_cmdwin` errors in the API (other errors in the API are not
translated: although not detailed in the API contract yet, errors are
supposed to be stable).
`nvim_(get|set)_option_value` pick the current buffer / window by default for buffer-local/window-local (but not global-local) options. So specifying `buf = 0` or `win = 0` in opts is unnecessary for those options. This PR removes those to reduce code clutter.
Problem:
This crashes Nvim:
tabedit
call nvim_win_set_option(1000, 'statusline', 'status')
split
wincmd J
wincmd j
Solution:
- Change `no_display` parameter value to be the same as in matching
`restore_win_noblock` call. In case of different values `topframe`
isn't restored to `curtab->tp_topframe`.
- Call `restore_win_noblock` if `switch_win_noblock` returns `FAIL`
(`switch_win` must always have matching `restore_win`)
- Change `switch_win`/`restore_win` to `_noblock` versions to allow
autocommands.
fixes#14097fixes#13577
This option, when set, stops nvim_open_win() from potentially firing
buffer-related autocmd events
(BufEnter, BufLeave and BufWinEnter in the case of nvim_open_win()).
- Rename `meth_pcall`.
- Make `pcall_err` raise an error if the function does not fail.
- Add `vim.pesc()` to treat a string as literal where a Lua pattern is
expected.
NB: the `!(flags & SOPT_GLOBAL)` exception is for 'statusline'.
Because `:set statusline=...` sets the global value for _all_ windows,
`:setlocal` is the best we can do there. This is a one-of-a-kind option
that doesn't work like any other option.
