The lsp client used to wait up to 500ms for a language server to
shutdown before sending a TERM signal.
The intention behind the 500ms grace period was to ensure the language
server exits to prevent stale processes, but it has the side-effect that
it can interrupt language-servers which are too slow to shutdown within
500ms. Language servers tend to write out index files or project files
on shutdown, and being interrupted during this process can cause
corruption of those files.
This changes the default to not wait at all, at the risk of leaving
stale processes around if the language server isn't well behaved.
An alternative would be to wait indefinitely, but that can cause neovim
to take several seconds to exit.
`code_action` gained extra functions (`filter` and `apply`) which
`range_code_action` didn't have.
To close this gap, this adds a `range` option to `code_action` and
deprecates `range_code_action`.
The option defaults to the current selection if in visual mode.
This allows users to setup a mapping like `vim.keymap.set({'v', 'n'},
'<a-CR>', vim.lsp.buf.code_action)`
`range_code_action` used to use the `<` and `>` markers to get the
_last_ selection which required using a `<Esc><Cmd>lua
vim.lsp.buf.range_code_action()<CR>` (note the `<ESC>`) mapping.
Currently LSP allows only using loclist or quickfix list window. I
normally prefer to review all quickfix items without opening quickfix
window. This fix allows passing `on_list` option which allows full
control what to do with list.
Here is example how to use it with quick fix list:
```lua
local function on_list(options)
vim.fn.setqflist({}, ' ', options)
vim.api.nvim_command('cfirst')
end
local bufopts = { noremap=true, silent=true, buffer=bufnr }
vim.keymap.set('n', '<leader>ad', function() vim.lsp.buf.declaration{on_list=on_list} end, bufopts)
vim.keymap.set('n', '<leader>d', function() vim.lsp.buf.definition{on_list=on_list} end, bufopts)
vim.keymap.set('n', '<leader>ai', function() vim.lsp.buf.implementation{on_list=on_list} end, bufopts)
vim.keymap.set('n', '<leader>at', function() vim.lsp.buf.type_definition{on_list=on_list} end, bufopts)
vim.keymap.set('n', '<leader>af', function() vim.lsp.buf.references(nil, {on_list=on_list}) end, bufopts)
```
If you prefer loclist do something like this:
```lua
local function on_list(options)
vim.fn.setloclist(0, {}, ' ', options)
vim.api.nvim_command('lopen')
end
```
close#19182
Co-authored-by: Mathias Fußenegger <mfussenegger@users.noreply.github.com>
A alternative/subset of https://github.com/neovim/neovim/pull/18506 that should be forward compatible with a potential project system.
Configuration of LSP clients (without lspconfig) now looks like this:
vim.lsp.start({
name = 'my-server-name',
cmd = {'name-of-language-server-executable'},
root_dir = vim.fs.dirname(vim.fs.find({'setup.py', 'pyproject.toml'}, { upward = true })[1]),
})
This makes the common use case easier.
If one really needs access to all clients, they can create a filter
function which manually calls `get_active_clients`.
The current approach of using `on_attach` callbacks for configuring
buffers for LSP is suboptimal:
1. It does not use the standard Nvim interface for driving and hooking
into events (i.e. autocommands)
2. There is no way for "third parties" (e.g. plugins) to hook into the
event. This means that *all* buffer configuration must go into the
user-supplied on_attach callback. This also makes it impossible for
these configurations to be modular, since it all must happen in the
same place.
3. There is currently no way to do something when a client detaches from
a buffer (there is no `on_detach` callback).
The solution is to use the traditional method of event handling in Nvim:
autocommands. When a LSP client is attached to a buffer, fire a
`LspAttach`. Likewise, when a client detaches from a buffer fire a
`LspDetach` event.
This enables plugins to easily add LSP-specific configuration to buffers
as well as enabling users to make their own configurations more modular
(e.g. by creating multiple LspAttach autocommands that each do
something unique).
This will check if the string after the variable in a @param is either
"number", "string", "table", "boolean" and "function" and if so add a
parenthesis around it. This will help separate the variable type with
the following text. Had all our functions been annotated with emmylua
then a more robust solution might have been preferable (such as always
assuming the third string is parameter type without making any checks).
I believe however this is a clear improvement over the current situation
and will suffice for now.
LSP servers should be daemonized (detached) so that they run in a
separate process group from Neovim's. Among other things, this ensures
the process does not inherit Neovim's TTY (#18475).
Make this configurable so that clients can explicitly opt-out of
detaching from Nvim.
Adds filter and id options to filter the client to use for rename.
Similar to the recently added `format` function.
rename will use all matching clients one after another and can handle a
mix of prepareRename/rename support. Also ensures the right
`offset_encoding` is used for the `make_position_params` calls
Deprecates the existing `vim.lsp.buf.formatting` function.
With this, `vim.lsp.buf.format` will replace all three:
- vim.lsp.buf.formatting
- vim.lsp.buf.formatting_sync
- vim.lsp.buf.formatting_seq_sync
* feat(lsp)!: remove capabilities sanitization
Users must now access client.server_capabilities which matches the same
structure as the protocol.
https://microsoft.github.io/language-server-protocol/specification
client.resolved_capabilities is no longer used to gate capabilities, and
will be removed in a future release.
BREAKING CHANGE
Co-authored-by: Mathias Fussenegger <f.mathias@zignar.net>
Implement two new options to vim.lsp.buf.code_action():
- filter (function): predicate taking an Action as input, and returning
a boolean.
- apply (boolean): when set to true, and there is just one remaining
action (after filtering), the action is applied without user query.
These options can, for example, be used to filter out, and automatically
apply, the action indicated by the server to be preferred:
vim.lsp.buf.code_action({
filter = function(action)
return action.isPreferred
end,
apply = true,
})
Fix#17514.
The use of 'softtabstop' to set tabSize was introduced in 5d5b068,
replacing 'tabstop'. If we look past the name tabSize and at the actual
purpose of the field, it's the indentation width used when formatting.
This corresponds to the Vim option 'shiftwidth', not 'softtabstop'.
The latter has the comparatively mundane purpose of controlling what
happens when you hit the tab key (and even this is incomplete, as it
fails to account for 'smarttab').
When buffer is visible in two splits simultaneously, BufHidden event is
not triggered, causing the floating window to remain on screen after
switching to another buffer.
Remove BufHidden event from close_events defaults, and close the window
if we changed the buffer to something other than the buffer that spawned
the floating window or the floating window buffer itself.
The examples are relevant and applicable for both Lua and Vimscript
configurations and the `vim.api.nvim_command` prefixes just add noise
that doesn't contribute to the example.
When the 'focusable' and 'focus_id' parameters are set,
`open_floating_preview` assumes that it should always move focus to an
existing floating window with the same 'focus_id'. However, there are
cases where we want to make a floating window focusable, but do not want
to focus it upon calling `open_floating_preview`. To distinguish these
cases, add a boolean parameter 'focus' that, when false, prevents
moving focus.
* vim.ui.input is an overridable function that prompts for user input
* take an opts table and the `on_confirm` callback, see `:help vim.ui.input` for more details
* defaults to a wrapper around vim.fn.input(opts)
* switches the built-in client's rename handler to use vim.ui.input by default
