`lsp.util.buf_versions` was already derived from changedtick (`on_lines`
from `buf_attach` synced the version)
As far as I can tell there is no need to keep track of the state in a
separate table.
The `complete()` mechanism matches completion candidates against
the typed text, so strict pre-filtering isn't necessary.
This is a first step towards supporting postfix snippets (like
`items@insert` in luals)
Problem: :TOhtml doesn't properly handle virtual text when it has
multiple highlight groups. It also improperly calculates position offset
for multi-byte virt_text characters.
Solution: Apply the `vim.api.nvim_strwidth` broadly to properly
calculate character offset, and handle the cases where the `hl` argument
can be a table of multiple hl groups.
Deprecation with vim.deprecate is currently too noisy. Show the
following warning instead:
[function] is deprecated. Run ":checkhealth vim.deprecated" for more information.
The important part is that the full message needs to be short enough to
fit in one line in order to not trigger the "Press ENTER or type command
to continue" prompt.
The full information and stack trace for the deprecated functions will
be shown in the new healthcheck `vim.deprecated`.
This will help manage the overly granular checkhealth completion to go
from
```
vim.health
vim.lsp
vim.provider.clipboard
vim.provider.node
vim.provider.perl
vim.provider.python
vim.provider.ruby
vim.treesitter
```
to
```
vim.health
vim.lsp
vim.provider
vim.treesitter
```
The namespacing for healthchecks for neovim modules is inconsistent and
confusing. The completion for `:checkhealth` with `--clean` gives
```
nvim
provider.clipboard
provider.node
provider.perl
provider.python
provider.ruby
vim.lsp
vim.treesitter
```
There are now three top-level module names for nvim: `nvim`, `provider`
and `vim` with no signs of stopping. The `nvim` name is especially
confusing as it does not contain all neovim checkhealths, which makes it
almost a decoy healthcheck.
The confusion only worsens if you add plugins to the mix:
```
lazy
mason
nvim
nvim-treesitter
provider.clipboard
provider.node
provider.perl
provider.python
provider.ruby
telescope
vim.lsp
vim.treesitter
```
Another problem with the current approach is that it's not easy to run
nvim-only healthchecks since they don't share the same namespace. The
current approach would be to run `:che nvim vim.* provider.*` and would
also require the user to know these are the neovim modules.
Instead, use this alternative structure:
```
vim.health
vim.lsp
vim.provider.clipboard
vim.provider.node
vim.provider.perl
vim.provider.python
vim.provider.ruby
vim.treesitter
```
and
```
lazy
mason
nvim-treesitter
telescope
vim.health
vim.lsp
vim.provider.clipboard
vim.provider.node
vim.provider.perl
vim.provider.python
vim.provider.ruby
vim.treesitter
```
Now, the entries are properly sorted and running nvim-only healthchecks
requires running only `:che vim.*`.
Problem:
The file watcher backends for Linux have too many limitations and
doesn't work reliably.
Solution:
disable didChangeWatchedFiles on Linux
Ref: #27807, #28058, #23291, #26520
Problem:
Inlay hints `enable()` does not fully implement the `:help dev-lua` guidelines:
Interface conventions ~
- When accepting a buffer id, etc., 0 means "current buffer", nil means "all
buffers". Likewise for window id, tabpage id, etc.
- Examples: |vim.lsp.codelens.clear()| |vim.diagnostic.enable()|
Solution:
Implement globally enabling inlay hints.
* refactor(lsp): do not rely on `enable` to create autocmds
* refactor(lsp): make `bufstates` a defaulttable
* refactor(lsp): make `bufstate` inherit values from `globalstate`
* feat(lsp): `vim.lsp.inlay_hints` now take effect on all buffers by default
* test(lsp): add basic tests for enable inlay hints for all buffers
* test(lsp): add test cases cover more than one buffer
Specifically, functions that are run in the context of the test runner
are put in module `test/testutil.lua` while the functions that are run
in the context of the test session are put in
`test/functional/testnvim.lua`.
Closes https://github.com/neovim/neovim/issues/27004.
Problem:
We need to establish a pattern for `enable()`.
Solution:
- First `enable()` parameter is always `enable:boolean`.
- Update `vim.diagnostic.enable()`
- Update `vim.lsp.inlay_hint.enable()`.
- It was not released yet, so no deprecation is needed. But to help
HEAD users, it will show an informative error.
- vim.deprecate():
- Improve message when the "removal version" is a *current or older* version.
This reverts commit 4382d2ed56.
The story for this feature was left in an incomplete state. It was never
the intention to unilaterally fold all information, only the ones that
did not contain relevant information. This feature does more harm than
good in its incomplete state.
`exec_lua` makes code slighly harder to read, so it's beneficial to
remove it in cases where it's possible or convenient.
Not all `exec_lua` calls should be removed even if the test passes as it
changes the semantics of the test even if it happens to pass.
From https://github.com/neovim/neovim/pull/28155#discussion_r1548185779:
"Note for tests like this, which fundamentally are about conversion, you
end up changing what conversion you are testing. Even if the result
happens to be same (as they often are, as we like the rules to be
consistent if possible), you are now testing the RPC conversion rules
instead of the vim script to in-process lua conversion rules."
From https://github.com/neovim/neovim/pull/28155#discussion_r1548190152:
"A test like this specifies that the cursor is valid immediately and not
after a separate cycle of normal (or an other input-processing) mode."
Problem:
LSP basic_finish test modified in #27899 is flaky again after #28030.
Solution:
Run on_setup() immediately after setup using a before_init callback.
This is the first installment of a multi-PR series significantly
refactoring how highlights are being specified.
The end goal is to have a base set of 20 ish most common highlights,
and then specific files only need to add more groups to that as needed.
As a complicating factor, we also want to migrate to the new default
color scheme eventually. But by sharing a base set, that future PR
will hopefully be a lot smaller since a lot of tests will be migrated
just simply by updating the base set in place.
As a first step, fix the anti-pattern than Screen defaults to ignoring
highlights. Highlights are integral part of the screen state, not
something "extra" which we only test "sometimes". For now, we still
allow opt-out via the intentionally ugly
screen._default_attr_ids = nil
The end goal is to get rid of all of these eventually (which will be
easier as part of the color scheme migration)
Problem:
As mentioned in #23002 on_setup and on_init are run concurrently.
However, in basic_finish tests on_setup must attach the client before
on_init finishes. The other basic_finish test isn't flaky because it
makes an RPC request in on_init.
Solution:
Don't use on_setup in basic_finish tests.
Problem: "NOTE"s, inline Vim script code, and links ending in digits may not be
highlighted correctly within the :Tutor.
Solution: set an explicit value for ":syntax iskeyword" that includes digits. Do
it after ":syntax include"s, so the included syntax/sh.vim doesn't mess with the
value.
Increase screen test width so all text within the conclusion section is visible.
Co-authored-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Added the following LSP semantic token types to be linked to highlight
groups by default:
* @lsp.type.event
* @lsp.type.keyword
* @lsp.type.modifier
* @lsp.type.number
* @lsp.type.operator
* @lsp.type.regexp
* @lsp.type.string
Problem:
`vim.lsp.util.rename()` deletes the buffers that are affected by
renaming. This has undesireable side effects. For example, when renaming
a directory, all buffers under that directory are deleted and windows
displaying those buffers are closed. Also, buffer options may change
after renaming.
Solution:
Rename the buffers with :saveas.
An alternative approach is to record all the relevant states and restore
it after renaming, but that seems to be more complex. In fact, the older
version was attempting to restore the states but only partially and
incorrectly.
Problem:
vim._watch.watchdirs has terrible performance.
Solution:
- On linux use fswatch as a watcher backend if available.
- Add File watcher section to health:vim.lsp. Warn if watchfunc is
libuv-poll.
