Problem: Cursor in wrong position when leaving insert mode.
Solution: Update the w_valid flags. Position the cursor also when not
redrawing. (closesvim/vim#12137)
c174c2e58c
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem:
LSP docs hover (textDocument/hover) doesn't handle HTML escape seqs in markdown.
Solution:
Convert common HTML escape seqs to a nicer form, to display in the float.
closees #22757
Signed-off-by: Kasama <robertoaall@gmail.com>
Problem: "wat" and "wast" files are one filetype.
Solution: Add a separate filetype for "wat" files. (Amaan Qureshi,
closesvim/vim#12165)
3ea62381c5
Co-authored-by: Amaan Qureshi <amaanq12@gmail.com>
Problem: no way of getting all highlight group definitions in a namespace.
Solution: add `nvim_get_hl()`, deprecate `nvim_get_hl_by_name()` and `nvim_get_hl_by_id()`.
Problem:
semver specifies that digit sequences in a prerelease string should be
compared as numbers, not lexically: https://semver.org/#spec-item-11
> Precedence for two pre-release versions with the same major, minor,
> and patch version MUST be determined by comparing each dot separated
> identifier from left to right until a difference is found as follows:
> 1. Identifiers consisting of only digits are compared numerically.
> 2. Identifiers with letters or hyphens are compared lexically in ASCII sort order.
> 3. Numeric identifiers always have lower precedence than non-numeric identifiers.
> 4. A larger set of pre-release fields has a higher precedence than a smaller set, if all of the preceding identifiers are equal.
Example:
1.0.0-alpha < 1.0.0-alpha.1 < 1.0.0-alpha.beta < 1.0.0-beta < 1.0.0-beta.2 < 1.0.0-beta.11 < 1.0.0-rc.1 < 1.0.0.
Solution:
cmp_prerel() treats all digit sequences in a prerelease string as
numbers. This doesn't _exactly_ match the spec, which specifies that
only dot-delimited digit sequences should be treated as numbers...
Problem:
- vim.split has more features than vim.gsplit.
- Cannot inspect the "separator" segments of vim.split or vim.gsplit.
Solution:
- Move common implementation from vim.split into vim.gsplit.
- TODO: deprecate vim.split in favor of vim.totable(vim.gsplit())?
- Introduce `keepsep` parameter.
Related: 84f66909e4
vim-patch:9.0.1419: Lean files are not recognized
Problem: Lean files are not recognized.
Solution: Add a pattern for Lean files. (Amaan Qureshi, closesvim/vim#12177)
4a5c39fc52
vim-patch:9.0.1421: Nu files are not recognized
Problem: Nu files are not recognized.
Solution: Add a pattern for Nu files. (Amaan Qureshi, closesvim/vim#12172)
8aa2a37f89
vim-patch:9.0.1422: Sage files are not recognized
Problem: Sage files are not recognized.
Solution: Add a pattern for Sage files. (Amaan Qureshi, closesvim/vim#12176)
d0639d717b
vim-patch:9.0.1423: WebAssembly Interface Type files are not recognized
Problem: WebAssembly Interface Type files are not recognized.
Solution: Add a pattern for WIT files. (Amaan Qureshi, closesvim/vim#12173)
890c772036
existing behavior of
:=
and
:[range]=
are unchanged. `|` is still allowed with this usage.
However,
:=p
and similar are changed in a way which could be construed as a breaking
change. Allowing |ex-flags| for := in the first place was a mistake as
any form of := DOES NOT MOVE THE CURSOR. So it would print one line number
and then print a completely different line contents after that.
Problem:
"tmux 3.2a" (output from "tmux -V") is not parsed easily.
Solution:
With `strict=false`, discard everything before the first digit.
- rename Semver => Version
- rename vim.version.version() => vim.version._version()
- rename matches() => has()
- remove `opts` from cmp()
Problem:
On Windows, :make does not display the output of the program it runs.
The cause is the default 'shellpipe'. On Linux, nvim uses `tee` to redirect the
output to both stdout and the error file. In Windows, for both cmd.exe and
powershell, the output is only redirected to the error file.
Solution:
- On Windows, change the 'shellpipe' default to "2>&1| tee".
- Nvim includes `tee` in its Windows package.
- Document recommended defaults for powershell.
Fixes#12910
Problem:
On Windows, pasting multiple lines on a terminal buffer cause all the
lines to appear on the same line, i.e., the line breaks are lost.
Cause:
Windows shells expect "\r\n" as line break but "terminal_paste" function
uses "\n".
Solution:
Use "\r\n" as line break for pasting in terminal buffer on Windows.
Note:
Although this issue was reported with powershell set as 'shell', it
occurs in cmd too.
Fixes#14621
Problem: Clamp for height in floating windows enforced no more than
editor height - 1, disallowing full editor height floating windows when
using cmdheight=0
Solution: Clamp to full height, removing the -1. Tested to give the
intended results with cmdheight=0, 1, or more than 1. This also
inadvertently fixes a rendering error with cmdheight >1 where the
bottom border would be overlapped by the cmdline.
* fix(column): rebuild status column when sign column is invalidated
Problem: When implementing a custom sign column through
`'statuscolumn'`, the status column is not properly rebuilt
when the sign column width changes.
Solution: Force a rebuild of the status column when the sign column
width is invalidated.
* test(column): 'statuscolumn' has correct width when (un)placing signs
Problem: Cursor displayed in wrong position after removing text prop. (Ben
Jackson)
Solution: Invalidate the cursor position. (closesvim/vim#10898)
326c5d36e7
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: ILE RPG files are not recognized.
Solution: Add patterns for ILE RPG files. (Andreas Louv, issue vim/vim#12152)
e202ec8a0c
Co-authored-by: Andreas Louv <andreas@louv.dk>
Problem:
vim.deprecate() shows ":help deprecated" for third-party plugins. ":help
deprecated" only describes deprecations in Nvim, and is unrelated to any
3rd party deprecations.
Solution:
If `plugin` is specified, don't show ":help deprecated".
fix#22235
Problem:
The functional tests have `is_os(s)` to determine if the current os is.
E.g. `is_os("win")` returns true if the current os is Windows. This is
done by checking if the sysname as detected by luv contains the
substring 'windows'. In MSYS shells, the sysname is looks like
MINGWXX_NT, where XX is either 32 or 64. So if you're using busted or
luv that you built separately, not the nvim-bundled versions, then
`is_os(s)` won't work.
Solution:
Treat sysname containing "mingw" as Windows.
Problem:
When LSP client renames a directory, opened buffers in the edfitor are not
renamed or closed. Then `:wall` shows errors.
https://github.com/neovim/neovim/blob/master/runtime/lua/vim/lsp/util.lua#L776
works correctly if you try to rename a single file, but doesn't delete old
buffers with `old_fname` is a dir.
Solution:
Update the logic in runtime/lua/vim/lsp/util.lua:rename()
Fixes#22617
Semi-regression. The "ruler" behavior for a floating window
was never really specified but in practice followed the users
cursor movements in normal mode in a focused float, which seems
like a reasonable behavior to now specify.
The builtin cat was removed in 4bc9229ecb
as it is not used during runtime but only for tests. However, it is a
very small and useful utility program that we need for a lot of our
tests, so there's no harm in bundling it, and it helps us avoid
complicating our build system by having two versions of neovim (neovim
for users and neovim for testing).
Also skip tests if "grep" or "sleep" isn't available.
we cannot remove 'paste'. It is very common in plugins and configs.
'pastetoggle' can and should be removed though, it's a total waste of everyone's time because it generates bug reports and doesn't work well, and is useless because bracketed-paste works better.
Problem:
The function name `vim.pretty_print`:
1. is verbose, which partially defeats its purpose as sugar
2. does not draw from existing precedent or any sort of convention
(except external projects like penlight or python?), which reduces
discoverability, and degrades signaling about best practices.
Solution:
- Rename to `vim.print`.
- Change the behavior so that
1. strings are printed without quotes
2. each arg is printed on its own line
3. tables are indented with 2 instead of 4 spaces
- Example:
:lua ='a', 'b', 42, {a=3}
a
b
42
{
a = 3
}
Comparison of alternatives:
- `vim.print`:
- pro: consistent with Lua's `print()`
- pro: aligns with potential `nvim_print` API function which will
replace nvim_echo, nvim_notify, etc.
- con: behaves differently than Lua's `print()`, slightly misleading?
- `vim.echo`:
- pro: `:echo` has similar "pretty print" behavior.
- con: inconsistent with Lua idioms.
- `vim.p`:
- pro: very short, fits with `vim.o`, etc.
- con: not as discoverable as "echo"
- con: less opportunity for `local p = vim.p` because of potential shadowing.
