Problem: Highlight for popupmenu kind and extra cannot be set.
Solution: Add PmenuKind, PmenuKindSel, PmenuExtra and PmenuExtraSel
highlight groups and use them. (Gianmaria Bajo, closesvim/vim#12114)
6a7c774920
Co-authored-by: Gianmaria Bajo <mg1979.git@gmail.com>
Problem: 'statuscolumn' width can be incorrect when toggling 'number'
or setting 'statuscolumn'.
Solution: Make sure the width is reset and re-estimated when
'statuscolumn' and 'number' are set. (When 'relativenumber'
is set this already happens because it always changes
"nrwidth_line_count".)
Problem:
In a success-failure-success situation, if minimal timeout is reached
between the failure and the second success, the session is stopped
without waiting for the second success, causing the test to fail.
Solution:
Wait for another success if a failure is seen after a success.
Ref #22155#22464
When combining attributes use the one that takes priority.
For :highlight command use the last one specified.
For API use a hard-coded order same as the order in docs.
Problem:
The sleep before collecting the initial screen state is confusing and
may lead to unexpected success if it comes after a blocking RPC call.
Solution:
Remove that sleep and add an "intermediate" argument.
Problem:
Validation messages are not consistently formatted.
- Parameter names sometimes are NOT quoted.
- Descriptive names (non-parameters) sometimes ARE quoted.
Solution:
Always quote the `name` value passed to a VALIDATE macro _unless_ the
value has whitespace.
Problem:
- API validation involves too much boilerplate.
- API validation errors are not consistently worded.
Solution:
Introduce some macros. Currently these are clumsy, but they at least
help with consistency and avoid some nesting.
Problem: The cursorline highlight logic checks for `w_cursor.lnum`
which may be different from the line number passed to
`win_line()` even when the cursor is actually on that line.
Solution: Update cursor line highlight logic to check for the line
number of the start of a closed fold if necessary.
Problem:
When not inside an Ex command, screen_resize() calls update_screen(),
which calls screenclear() and set the screen as valid. However, when
inside an Ex command, redrawing is postponed so update_screen() screen
doesn't do anything, and the screen is still invalid after the resize,
causing ui_comp_raw_line() to be no-op until update_screen() is called
on the main loop.
Solution:
Restore the call to screenclear() inside screen_resize() so that the
screen is invalid after screen_resize(). Since screenclear() changes
redraw type from UPD_CLEAR to UPD_NOT_VALID, it is called at most once
for each resize, so this shouldn't change how much code is run in the
common (not inside an Ex command) case.
Problem: Inserting a register on the command line does not trigger
incsearch or update hlsearch.
Solution: Have cmdline_insert_reg() return CMDLINE_CHANGED when appropriate
and handle it correctly. (Ken Takata, closesvim/vim#11960)
c4b7dec382
Co-authored-by: K.Takata <kentkt@csc.jp>
Problem: The fold and sign column is built and stored regardless of
whether the corresponding item is present in 'statuscolumn'.
Solution: Since the 'statuscolumn' parses itself, we can defer
building the columns until the corresponding item is
actually encountered.
Problem: The 'statuscolumn' width is being estimated without the
proper context. In particular, this resulted in the fact
that a custom fold column could be included in the estimated
`number_width()`, and doubly added when actually drawing the
statuscolumn due to `win_col_off()` also adding the
`'foldcolumn'` width. Resulting in a status column that is
`'foldcolumn'` cells wider than necessary.
Solution: Estimate 'statuscolumn' width in `get_statuscol_str()` when
a buffer's line count has changed.
Problem:
The "force" flag of win_close() complicates the code and adds edge cases
where it is not clear what the correct behavior should be.
The "free_buf" flag of win_close() is passed on to float windows when
closing the last window of a tabpage, which doesn't make much sense.
Solution:
Remove the "force" flag and always close float windows as if :close! is
used when closing the last window of a tabpage, and set the "free_buf"
flag for a float window based on whether its buffer can be freed.
As 'hidden' is on by default, this change shouldn't affect many people.
Problem: When a folded line has virtual lines attached, the following
problems occur:
- The virtual lines are drawn empty.
- The 'foldtext' line is drawn empty.
- The cursor is drawn incorrectly.
Solution: Check whether virtual lines belong to a folded line.
Fix#17027Fix#19557Fix#21837
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
Problem: Some tests fail when run under valgrind.
Solution: Increase timeouts.
353c351bd2
Cherry-pick Test_pum_with_preview_win() from patch 8.2.0011.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: 'statuscolumn' click definitions are cleared, evaluated,
allocated and filled each redraw for every row in a window.
This despite the fact that we only store a single click
definition array for the entire column as opposed to one
for each row.
Solution: Only fill the 'statuscolumn' click definition array once per
window per redraw.
Resolve https://github.com/neovim/neovim/issues/21767.
Problem: Command line completion popup menu positioned wrong when using a
terminal window.
Solution: Position the popup menu differently when editing the command line.
(Yegappan Lakshmanan, closesvim/vim#10050, closesvim/vim#10035)
1104a6d0c2
The test in the patch looks a bit hard to understand.
Add a Lua test that is more straightforward.
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Click definitions are always filled for tabline, statusline and winbar,
so they should also be always filled for statuscolumn, otherwise it will
leak memory.
Note: this doesn't actually change the existing code much, because of a
typo in the existing code.
Problem: Memory is leaked in tabline click definitions since
https://github.com/neovim/neovim/pull/21008.
Solution: Add back a call to `stl_clear_click_defs()` that was lost in
the refactor PR.
Problem: The default fold column, as well as the 'statuscolumn', were
drawn unnecessarily/unexpectedly for virtual lines placed
with `virt_lines_leftcol` set.
Solution: Skip the column states if a virtual line with
`virt_lines_leftcol` set will be drawn.
Problem: The `'statuscolumn'` was not re-evaluated for wrapped lines,
when preceded by virtual/filler lines. There was also no way
to distinguish virtual and wrapped lines in the status column.
Solution: Make sure to rebuild the statuscolumn, and replace variable
`v:wrap` with `v:virtnum`. `v:virtnum` is negative when drawing
virtual lines, zero when drawing the actual buffer line, and
positive when drawing the wrapped part of a buffer line.
Problem: Cannot use page-up and page-down in the command line completion
popup menu.
Solution: Check for to page-up and page-down keys. (Yegappan Lakshmanan,
closesvim/vim#9960)
5cffa8df7e
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Command line not redrawn when finishing popup menu and the screen
has scrolled up.
Solution: Redraw the command line after updating the screen. (closesvim/vim#9722)
414acd342f
Code change is N/A as Nvim doesn't call update_screen() here.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
fix(statuscolumn): statusline click registered as statuscolumn
Problem: Status line click is registered as status status column click.
Solution: Check that mouse is not on the status line.
Resolve https://github.com/luukvbaal/statuscol.nvim/issues/4.
