Problem:
`nvim --listen` does not error on EADDRINUSE. #30123
Solution:
Now that `$NVIM_LISTEN_ADDRESS` is deprecated and input *only* (instead
of the old, ambiguous situation where it was both an input *and* an
output), we can be fail fast instead of trying to "recover". This
reverts the "recovery" behavior of
704ba4151e, but that was basically
a workaround for the fragility of `$NVIM_LISTEN_ADDRESS`.
For context, see https://github.com/neovim/neovim/pull/24738. Before
that PR, Nvim did not correctly handle captures with quantifiers. That
PR made the correct behavior opt-in to minimize breaking changes, with
the intention that the correct behavior would eventually become the
default. Users can still opt-in to the old (incorrect) behavior for now,
but this option will eventually be removed completely.
BREAKING CHANGE: Any plugin which uses `Query:iter_matches()` must
update their call sites to expect an array of nodes in the `match`
table, rather than a single node.
Problem: Window is updated with potentially invalid skipcol in recursive
window update path. I.e. cursor outside of visible range in
large line that does not fit.
Solution: Make sure it is valid (Luuk van Baal).
3d5065fc75
Problem: inserting with a count is inefficient
Solution: Disable calculation of the cursor position and topline, if a
count has been used (Ken Takata)
Optimize insertion when using :normal 10000ix.
This patch optimizes the insertion with a large count (e.g. `:normal
10000ix`).
It seems that calculation of the cursor position for a long line is slow
and it takes O(n^2). Disable the calculation if not needed.
Before:
```
$ time ./vim --clean -c 'normal 10000ix' -cq!
real 0m1.879s
user 0m1.328s
sys 0m0.139s
$ time ./vim --clean -c 'normal 20000ix' -cq!
real 0m5.574s
user 0m5.421s
sys 0m0.093s
$ time ./vim --clean -c 'normal 40000ix' -cq!
real 0m23.588s
user 0m23.187s
sys 0m0.140s
```
After:
```
$ time ./vim --clean -c 'normal 10000ix' -cq!
real 0m0.187s
user 0m0.046s
sys 0m0.093s
$ time ./vim --clean -c 'normal 20000ix' -cq!
real 0m0.217s
user 0m0.046s
sys 0m0.108s
$ time ./vim --clean -c 'normal 40000ix' -cq!
real 0m0.278s
user 0m0.093s
sys 0m0.140s
$ time ./vim --clean -c 'normal 80000ix' -cq!
real 0m0.494s
user 0m0.311s
sys 0m0.140s
$ time ./vim --clean -c 'normal 160000ix' -cq!
real 0m1.302s
user 0m1.140s
sys 0m0.094s
```
closes: vim/vim#1558809b80d23cf
Co-authored-by: Ken Takata <kentkt@csc.jp>
Problem: Behavior of Enter in completion depends on typing speed.
Solution: Don't make whether Enter selects original text depend on
whether completion has been interrupted, which can happen
interactively with a slow completion function.
Problem: prefix can be a symbol like period, the fuzzy matching can't
handle it correctly.
Solution: when prefix is empty or a symbol add all lsp completion
result into matches.
Use the grapheme break algorithm from utf8proc to support grapheme
clusters from recent unicode versions.
Handle variant selector VS16 turning some codepoints into double-width
emoji. This means we need to use ptr2cells rather than char2cells when
possible.
Problem:
Things like underlines are always given a default foreground highlight
regardless of the value of `sp`.
Solution:
Check for `sp` first, and apply that color to the text decoration color if it
exists.
Limitations:
If there is no value of `sp`, vim applies a text decoration color that matches
the foreground of the text. This is still not implemented (and seems like a much
more complex problem): in TOhtml, the underline will still be given a default
foreground highlight.
Problem: Installing treesitter parser is hard (harder than
climbing to heaven).
Solution: Add optional support for wasm parsers with `wasmtime`.
Notes:
* Needs to be enabled by setting `ENABLE_WASMTIME` for tree-sitter and
Neovim. Build with
`make CMAKE_EXTRA_FLAGS=-DENABLE_WASMTIME=ON
DEPS_CMAKE_FLAGS=-DENABLE_WASMTIME=ON`
* Adds optional Rust (obviously) and C11 dependencies.
* Wasmtime comes with a lot of features that can negatively affect
Neovim performance due to library and symbol table size. Make sure to
build with minimal features and full LTO.
* To reduce re-compilation times, install `sccache` and build with
`RUSTC_WRAPPER=<path/to/sccache> make ...`
Problem: The matchparen plugin is slow on a long line.
Solution: Don't use a regexp to get char at and before cursor.
(zeertzjq)
Example:
```vim
call setline(1, repeat(' foobar', 100000))
runtime plugin/matchparen.vim
normal! $hhhhhhhh
```
closes: vim/vim#1556881e7513c86
Problem: cannot set special highlight kind in popupmenu
Solution: add kind_hlgroup item to complete function
(glepnir)
closes: vim/vim#1556138f99a1f0d
Co-authored-by: glepnir <glephunter@gmail.com>
Problem: Some items of completion results include function signatures that can
cause the pum to be very long when a function has many params, because pum
scales with the longest word/abbr.
Solution: add custom covert function that can customise abbr to remove params.
Upon `terminal_enter`, `mapped_ctrl_c` is set in order to avoid `CTRL-C`
interrupts (which is proxied to the terminal process instead), `os_inchar`
will then test `mapped_ctrl_c` against `State` and set `ctrl_c_interrupts=false`
which prevents `process_ctrl_c` from setting `got_int=true` in a terminal
state.
However, if `got_int` is set outside of `process_ctrl_c`, e.g. via
`interrupt()`, this will hang the neovim process as `terminal_execute` will
enter an endless loop as `got_int` will never be cleared causing `safe_vgetc`
to always return `Ctrl_C`.
A minimal example reproducing this bug:
```vim
:autocmd TermEnter * call timer_start(500, {-> interrupt()})
:terminal
:startinsert
```
To fix, we make sure `got_int` is cleared inside `terminal_execute` when
it detects `Ctrl_C`.
Closes#20726
Co-authored-by: zeertzjq <zeertzjq@outlook.com>
When a C0 character is present in an OSC terminator (i.e. after the ESC
but before a \ (0x5c) or printable character), vterm executes the
control character and resets the current string fragment. If the C0
character is the final byte in the sequence, the string fragment has a
zero length. However, because the VT parser is still in the "escape"
state, vterm attempts to subtract 1 from the string length (to account
for the escape character). When the string fragment is empty, this
causes an underflow in the unsigned size variable, resulting in a buffer
overflow.
The fix is simple: explicitly check if the string length is non-zero
before subtracting.
Lua's string.byte has a maximum (undocumented) allowable length, so
vim.text.hencode fails on large strings with the error "string slice too
long".
Instead of converting the string to an array of bytes up front, convert
each character to a byte one at a time.
Problem: Contents of terminal buffer are not reflown when Nvim is
resized.
Solution: Enable reflow in libvterm by default. Now that libvterm is
vendored, also fix "TUI rapid resize" test failures there.
Note: Neovim's scrollback buffer does not support reflow (yet), so lines
vanishing into the buffer due to a too small window will be restored
without reflow.
This also makes shada reading slightly faster due to avoiding
some copying and allocation.
Use keysets to drive decoding of msgpack maps for shada entries.
Problem:
Tests have lots of exec_lua calls which input blocks of code
provided as unformatted strings.
Solution:
Teach exec_lua how to handle functions.
Problem: ex: trailing dot is optional for :g and :insert/:append
Solution: don't break out early, when the next command is empty.
(Mohamed Akram)
The terminating period is optional for the last command in a global
command list.
closes: vim/vim#154070214680a8e
Co-authored-by: Mohamed Akram <mohd.akram@outlook.com>
Problem: [security] use-after-free in tagstack_clear_entry
(Suyue Guo )
Solution: Instead of manually calling vim_free() on each of the tagstack
entries, let's use tagstack_clear_entry(), which will
also free the stack, but using the VIM_CLEAR macro,
which prevents a use-after-free by setting those pointers
to NULL
This addresses CVE-2024-41957
Github advisory:
https://github.com/vim/vim/security/advisories/GHSA-f9cr-gv85-hcr48a0bbe7b8a
Co-authored-by: Christian Brabandt <cb@256bit.org>
`buf.code_action` always included diagnostics on a given line from all
clients. Servers should only receive diagnostics they published, and in
the exact same format they sent it.
Should fix https://github.com/neovim/neovim/issues/29500
Problem:
Some language servers (e.g., rust-analyzer, texlab) are desynced when
the user deletes the entire contents of the buffer. This is due to the
discrepancy between how nvim computes diff and how nvim treats empty
buffer.
* diff: If the buffer became empty, then the diff includes the last
line's eol.
* empty buffer: Even if the buffer is empty, nvim regards it as having
a single empty line with eol.
Solution:
Add special case for diff computation when the buffer becomes empty so
that it does not include the eol of the last line.
Problem: CompletionItem in lsp spec mentioned the deprecated attribute
Solution: when item has deprecated attribute set hl_group to DiagnosticDeprecated
in complete function
Problem:
`'scrollbind'` does not work properly if the window being scrolled
automatically contains any filler/virtual lines (except for diff filler
lines).
This is because when the scrollbind check is done, the logic only
considers changes to topline which are represented as line numbers.
Solution:
Write the logic for determine the scroll amount to take into account
filler/virtual lines.
Fixes#29751
Problem: Some functions are not tested
Solution: Add a few more tests, fix a few minor problems
(Yegappan Lakshmanan)
closes: vim/vim#14789fe424d13ef
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
This is identical to `named_node_for_range` except that it includes
anonymous nodes. This maintains consistency in the API because we
already have `descendant_for_range` and `named_descendant_for_range`.
Reverts https://github.com/neovim/neovim/pull/29212 and adds a few
additional test cases
From the spec
> All text edits ranges refer to positions in the document they are
> computed on. They therefore move a document from state S1 to S2 without
> describing any intermediate state. Text edits ranges must never overlap,
> that means no part of the original document must be manipulated by more
> than one edit. However, it is possible that multiple edits have the same
> start position: multiple inserts, or any number of inserts followed by a
> single remove or replace edit. If multiple inserts have the same
> position, the order in the array defines the order in which the inserted
> strings appear in the resulting text.
The previous fix seems wrong. The important part:
> If multiple inserts have the same position, the order in the array
> defines the order in which the inserted strings appear in the
> resulting text.
Emphasis on _appear in the resulting text_
Which means that in:
local edits1 = {
make_edit(0, 3, 0, 3, { 'World' }),
make_edit(0, 3, 0, 3, { 'Hello' }),
}
`World` must appear before `Hello` in the final text. That means the old
logic was correct, and the fix was wrong.
Problem: Rename of pum hl_group is incomplete in source.
Solution: Also rename the test function. Rename to user_hlattr in code
to avoid confusion with pum_extra. Add test with matched text
highlighting (zeertzjq).
closes: vim/vim#153484100852e09
Also:
- Remove mt_end() and MT_FLAG_DECOR_VIRT_TEXT_INLINE checks, as they are
already checked by marktree_itr_check_filter().
- Move ns_in_win() to the last check in decor_redraw_col().
