Problem: Filetype test fails.
Solution: Move detection by name before detection by extension.
Improve TextChanged test and remove wrong test and fix
a typo in a comment (zeertzjq).
closes: vim/vim#143738eb7523802
The changes to filetype.vim are N/A since Nvim always prefers filename
matches to extension matches.
Problem: Filetype detection fails if file name ends in many '~'.
Solution: Strip multiple '~' at the same time. (closesvim/vim#12553)
c12e4eecbb
In Nvim this already works as Lua filetype detection isn't subject to
such a small recursion limit as autocommands, but it still makes sense
to avoid unnecessary recursion.
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: filetype: rock_manifest and config.ld files are not recognized
Solution: Detect 'rock_manifest' and 'config.ld' as lua
(Wu, Zhenyu)
closes: vim/vim#14370a917bd58bd
Co-authored-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Problem: filetype: fontconfig files are not recognized
Solution: detect 'fonts.conf' as xml
(Wu, Zhenyu)
closes: vim/vim#14367a2c27b01dc
Co-authored-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Problem: filetype: zsh theme, history and zunit files are not
recognized.
Solution: Detect '.zsh_history', '*.zsh-theme' and '*.zunit' as zsh
(Wu, Zhenyu)
closes: vim/vim#14366a55a22a1a3
Co-authored-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Problem: filetype: bash history files are not recognized
Solution: detect .bash-history and .bash_history files as bash
(Wu, Zhenyu)
closes: vim/vim#1436584ce55001a
Co-authored-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Problem: filetype: netrw history file is not recognized
Solution: Detect .netrwhist as vim files (Wu, Zhenyu)
closes: vim/vim#14364abbb4a4f70
Co-authored-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Problem: filetype: mysql history files are not recognized
Solution: Detect .mysql_history as mysql
(Wu, Zhenyu)
closes: vim/vim#143626b285c8cfd
Co-authored-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Problem: Conceal test fails when rightleft feature is disabled.
Solution: Skip test if rightleft feature is missing (Julio B).
closes: vim/vim#143425df961a1bc
Co-authored-by: Julio B <julio.bacel@gmail.com>
Problem: Filetype may be undetected when a SwapExists autocommand sets
filetype in another buffer.
Solution: Make filetype detection state buffer-specific. Also fix a
similar problem for 'modified' (zeertzjq).
closes: vim/vim#143445bf6c2117f
Problem: TextChanged autocommand not triggered under some circumstances
(Sergey Vlasov)
Solution: Trigger TextChanged when TextChangedI has not been triggered
fixes: vim/vim#14332closes: vim/vim#143398603270293
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Recording may still be wrong in Select mode (after 8.2.3993).
Solution: Make sure a character isn't split between two buffer blocks.
(zeertzjq)
closes: vim/vim#14326ea95f1a5ad
Problem: Two unrelated things are tested by a single test.
Solution: Split it into two, restoring the old Test_brace_single_line().
Add missing cleanup to some tests.
(zeertzjq)
closes: vim/vim#14323ad493ef3ea
Problem: Page-wise scrolling with Ctrl-D/Ctrl-U implements
it's own logic to change the topline and cursor.
More logic than necessary for scrolling with Ctrl-F/Ctrl-B
was removed in patch 9.1.0211.
Solution: Re-use the logic from Ctrl-E/Ctrl-Y/Ctrl-F/Ctrl-B while
staying backward compatible as much as possible.
Restore some of the logic that determined how many lines will
be scrolled (Luuk van Baal)
5a2e3ec9ac
Problem: Unnecessary multiplications in backspace code, as
"col / ts * ts" is the same as "col - col % ts".
Solution: Change "col / ts * ts" to "col - col % ts". Adjust the loop
and the comments ins_bs() to be easier to understand. Update
tests to reset 'smarttab' properly.
(zeertzjq)
closes: vim/vim#143088ede7a0694
Problem: regexp: verymagic cannot match before/after a mark
Solution: Correctly check for the very magic check (Julio B)
Fix regexp parser for \v%>'m and \v%<'m
Currently \v%'m works fine, but it is unable to match before or after
the position of mark m.
closes: vim/vim#1430946fa3c7e27
Co-authored-by: Julio B <julio.bacel@gmail.com>
Problem: CI: MS-Windows fails in test_winfixbuf
(after v9.1.208)
Solution: Instead of skipping the test, write the file
so it exists on disk, to verify that MS-Windows
short filename expansion is successful.
(Sean Dewar)
related: vim/vim#14286aed6554b46
Co-authored-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Problem: Error on exit with EXITFREE and 'winfixbuf'.
Solution: Handle DT_FREE before checking for 'winfixbuf'.
(zeertzjq)
closes: vim/vim#14314620e85265c
Problem: Page-wise scrolling with Ctrl-F/Ctrl-B implements
it's own logic to change the topline and cursor.
In doing so, skipcol is not handled properly for
'smoothscroll', and virtual lines.
Solution: Re-use the logic from Ctrl-E/Ctrl-Y while staying
backward compatible as much as possible.
b9f5b95b7b
Problem: winfixbuf does not allow to re-edit current buffer
(Tim Pope, after v9.1.0147)
Solution: Explicitly allow :e even when 'winfixbuf' is set,
since it just re-loads the current buffer
(Colin Kennedy)
fixes: vim/vim#14237closes: vim/vim#1428665e580bd56
Problem: Cannot use modifiers before :-Ntabmove.
Solution: Check backwards from the command instead of checking from the
start of the command line. Slightly adjust docs to make them
more consistent (zeertzjq).
closes: vim/vim#14289076faac537
Problem: Not enough tests for the slice() function.
Solution: Test with multibyte chars, and in both Legacy and Vim9 script.
Update docs to be clearer about how it treats composing chars.
(zeertzjq)
closes: vim/vim#14275ad38769030
Problem: :drop tries to :rewind the argumentlist, which results in E37
(after v9.1.0046)
Solution: instead of calling ex_rewind(), call open_buffer() only when
re-using the initial empty buffer
fixes: vim/vim#14219closes: vim/vim#14220978178823b
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: complete_info() returns wrong order of items
(after v9.0.2018)
Solution: Revert Patch v9.0.2018
(Girish Palya)
bug fix: complete_info() gives wrong results
1) complete_info() reverses list of items during <c-p>
2) 'selected' item index is wrong during <c-p>
3) number of items returnd can be wrong
Solution:
- Decouple 'cp_number' from 'selected' index since they need not be
correlated
- Do not iterate the list backwards
- Add targeted tests
Regression introduced by 69fb5afb3b
Following are unnecessary commits to patch problems from above:
fef6630166daef8c7437
All the tests from above commits are retained though.
fixes: vim/vim#14204closes: vim/vim#142418950bf7f8b
Remove EMPTY_IF_NULL() as it has been unnecessary since #12673.
Co-authored-by: Girish Palya <girishji@gmail.com>
Problem: Not all standard treesitter groups are documented.
Solution: Document them all (without relying on fallback); add default
link for new `*.builtin` groups to `Special` and `@keyword.type` to
`Structure`. Remove `@markup.environment.*` which only made sense for
LaTeX.
Problem: Wrong cursor position when clicking after end of line with
'rightleft', 'virtualedit' and conceal.
Solution: Set values in ScreenCols[] also with SLF_RIGHTLEFT. Also fix
off-by-one cursor position with 'colorcolumn' (zeertzjq).
closes: vim/vim#14218deb2204bff
Problem: Cursor position wrong when clicking with conceal and wrap.
Solution: Use the virtual column of the last char for ScreenCols[] in
boguscols. Remove use of MAXCOL in ScreenCols[]. Rename
third argument of wlv_screen_line() to "clear_end" as that's
clearer what it does (zeertzjq).
related: 14192
closes: vim/vim#14200d0c1b7723f
Rename win_put_linebuf() to wlv_put_linebuf().
Problem: Can define function with invalid name inside 'formatexpr'.
Solution: Use goto instead of checking for did_emsg later.
(zeertzjq)
closes: vim/vim#142096a04bf5ee5
