Problem: Various typos in the code, redundant and strange use of
:execute in test_ins_complete.vim (after 9.1.1315).
Solution: Fix typos in the code and in the documentation, use the
executed command directly (zeertzjq).
closes: vim/vim#1714398800979dc
Co-authored-by: Christ van Willegen <cvwillegen@gmail.com>
Problem: 'smoothscroll' gets stuck with 'listchars' "eol".
Solution: Count size of 'listchars' "eol" in line size when scrolling.
(zeertzjq)
related: neovim/neovim#32405closes: vim/vim#166272c47ab8fcd
Problem: exclusive selection not respected when re-selecting block mode
(Matt Ellis)
Solution: advance selection by another character when using
selection=exclusive and visual block mode
fixes: vim/vim#16202closes: vim/vim#16219bb95589473
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Option metadata like list of valid values for an option and
option flags are not listed in the `options.lua` file and are instead
manually defined in C, which means option metadata is split between
several places.
Solution: Put metadata such as list of valid values for an option and
option flags in `options.lua`, and autogenerate the corresponding C
variables and enums.
Supersedes #28659
Co-authored-by: glepnir <glephunter@gmail.com>
Problem: Ext_messages chunks only contain the highlight attr id, which
is not very useful for vim.ui_attach() consumers.
Solotion: Add highlight group id to message chunks, which can easily be
used to highlight text in the TUI through nvim_buf_set_extmark():
hl_group = synIDattr(id, "name").
Problem: Highlight group id is not propagated to the end of the message call
stack, where ext_messages are emitted.
Solution: Refactor message functions to pass along highlight group id
instead of attr id.
while the implementation is not tied to screen chars, it is a reasonable
expectation to support the same size. If nvim is able to display a
multibyte character, it will accept the same character as input,
including in normal mode commands like r{char}
- Fixes 'autoindent' being applied during redo.
- Makes redoing a large paste significantly faster.
- Stores pasted text in the register being recorded.
Fix#28561
Problem:
The name `os_inchar` (from Vim's old `mch_inchar`) is ambiguous:
"inchar" sounds like it could be reading or enqueuing (setting) input.
Its docstring is also ambiguous.
Solution:
- Rename `os_inchar` to `input_get`.
- Write some mf'ing docstrings.
- Add assert() in TRY_READ().
Use the grapheme break algorithm from utf8proc to support grapheme
clusters from recent unicode versions.
Handle variant selector VS16 turning some codepoints into double-width
emoji. This means we need to use ptr2cells rather than char2cells when
possible.
Problem: "dvgo" is not always an inclusive motion
(Iain King-Speir)
Solution: initialize the inclusive flag to false
fixes: vim/vim#15580closes: vim/vim#15582f8702aeb8f
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Code related to findfile() is spread out.
Solution: Put findfile() related code into a new source file. (Yegappan
Lakshmanan, closesvim/vim#3934)
5fd0f5052f
Keep functions related to wildcard expansion in path.c, as in Vim they
are now spread out among multiple files, which isn't really ideal.
Problem:
`'scrollbind'` does not work properly if the window being scrolled
automatically contains any filler/virtual lines (except for diff filler
lines).
This is because when the scrollbind check is done, the logic only
considers changes to topline which are represented as line numbers.
Solution:
Write the logic for determine the scroll amount to take into account
filler/virtual lines.
Fixes#29751
Problem:
Variables are often assigned multiple places in common patterns.
Solution:
Replace these common patterns with different patterns that reduce the
number of assignments.
Use `MAX` and `MIN`:
```c
if (x < y) {
x = y;
}
// -->
x = MAX(x, y);
```
```c
if (x > y) {
x = y;
}
// -->
x = MIN(x, y);
```
Use ternary:
```c
int a;
if (cond) {
a = b;
} els {
a = c;
}
// -->
int a = cond ? b : c;
```
Problem: Current instance of last search pattern not easily spotted.
Solution: Add CurSearch highlighting. (closesvim/vim#10133)
a43993897a
Some code is superseded by later patches that are already ported.
Co-authored-by: LemonBoy <thatlemon@gmail.com>
The latter was mostly relevant with the past char_u madness.
NOTE: STRCAT also functioned as a counterfeit "NOLINT" for clint
apparently. But NOLINT-ing every usecase is just the same as disabling
the check entirely.
Problem: Wrong yanking with exclusive selection and virtualedit=all,
and integer overflow when using getregion() on it.
Solution: Set coladd when decreasing column and 'virtualedit' is active.
Add more tests for getregion() with 'virtualedit' (zeertzjq).
closes: vim/vim#14830701ad50a9e
Problem: too many strlen() calls in search.c
Solution: refactor code and remove more strlen() calls,
use explicit variable to remember strlen
(John Marriott)
closes: vim/vim#147968c85a2a49a
Co-authored-by: John Marriott <basilisk@internode.on.net>
Problem: Vim9: CTRL-] used in :def function does not work.
Solution: Omit count or prepend colon. (closesvim/vim#6769)
b3ea36c5bc
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: 'showcmd' is wrong for partial mapping with multibyte char,
and isn't very readable with modifyOtherKeys.
Solution: Decode multibyte char and merge modifiers into the char.
(zeertzjq)
This improves the following situations:
- Multibyte chars whose individual bytes are considered unprintable are
now shown properly in 'showcmd' area.
- Ctrl-W with modifyOtherKeys now shows ^W in 'showcmd' area.
The following situation may still need improvement:
- If the char is a special key or has modifiers that cannot be merged
into it, internal keycodes are shown in 'showcmd' area like before.
This applies to keys typed in Normal mode commands as well, and it's
hard to decide how to make it more readable due to the limited space
taken by 'showcmd', so I'll leave it for later.
closes: vim/vim#14572acdfb8a979
Problem: overflow detection not accurate when adding digits
Solution: Use a helper function
Use a helper function to better detect overflows before adding integer
digits to a long or an integer variable respectively. Signal the
overflow to the caller function.
closes: vim/vim#1353922cbc8a4e1
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem: Logic to make sure cursor is in visible part of the screen after
scrolling the text with 'smoothscroll' is scattered, asymmetric
and contains bugs.
Solution: Adjust and create helper function for 'smoothscroll' cursor logic.
(Luuk van Baal)
9148ba8a46
Problem: Support for 'smoothscroll' in (half-)page scrolling
broke backward compatibility and can be made to work better.
(after v9.1.215)
Solution: Restore the previous cursor and end-of-buffer behavior for
half-page scrolling and improve 'smoothscroll' support.
(Luuk van Baal)
cb204e688e
Problem: Typing "interrupt" at debug prompt may keep exception around,
causing function calls to fail.
Solution: Discard any exception at the toplevel. (closesvim/vim#9532)
069613c9e8
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: Page-wise scrolling with Ctrl-D/Ctrl-U implements
it's own logic to change the topline and cursor.
More logic than necessary for scrolling with Ctrl-F/Ctrl-B
was removed in patch 9.1.0211.
Solution: Re-use the logic from Ctrl-E/Ctrl-Y/Ctrl-F/Ctrl-B while
staying backward compatible as much as possible.
Restore some of the logic that determined how many lines will
be scrolled (Luuk van Baal)
5a2e3ec9ac
Problem: Cursor line is unconcealed when pressing 'r' in Normal mode
when 'concealcursor' contains 'n' but not 'i'.
Solution: Don't check conceal when pressing 'r' in Normal mode.
Vim doesn't have this problem because it doesn't call redrawWinline() in
conceal_check_cursor_line() and instead sets a global variable.
A lot of functions in move.c only worked for curwin, alternatively
took a `wp` arg but still only work if that happens to be curwin.
Refactor those that are needed for update_topline(wp) to work
for any window.
fixes#27723fixes#27720
Problem: too many STRLEN calls when getting a memline
Solution: Optimize calls to STRLEN(), add a few functions in memline.c
that return the byte length instead of relying on STRLEN()
(John Marriott)
closes: vim/vim#1405202d7a6c6cf
Cherry-pick line break changes from patch 8.1.0226.
Cherry-pick ml_line_len from patch 8.1.0579.
Cherry-pick test_comments.vim change from patch 9.1.0153.
Co-authored-by: John Marriott <basilisk@internode.on.net>
Problem: Put in Visual mode wrong if it replaces fold marker.
Solution: Temporarily disable folding during put in Visual mode.
(zeertzjq)
fixes: vim/vim#14097closes: vim/vim#141004e141c66b9
Problem:
Since 2448816956, the --startuptime report shows
two blocks of data. The TUI process and its embedded nvim process write to the
file concurrently, which may interleave the two startup sequences into the same
timeline.
Solution:
Report each process as a separate section in the same file.
1. Each process buffers the full report.
2. After startup is finished, the buffer is flushed (appended) to the file.
Fix#23036
Sample report:
--- Startup times for process: Primary/TUI ---
times in msec
clock self+sourced self: sourced script
clock elapsed: other lines
000.006 000.006: --- NVIM STARTING ---
000.428 000.422: event init
000.728 000.301: early init
...
005.880 000.713: init highlight
005.882 000.002: --- NVIM STARTED ---
--- Startup times for process: Embedded ---
times in msec
clock self+sourced self: sourced script
clock elapsed: other lines
000.006 000.006: --- NVIM STARTING ---
000.409 000.403: event init
000.557 000.148: early init
000.633 000.077: locale set
...
014.383 000.430: first screen update
014.387 000.003: --- NVIM STARTED ---
Problem: Recorded register cannot be translated using keytrans() when
it involves character search (iddqd505)
Solution: Record a K_IGNORE instead of a K_NOP (zeertzjq)
related: vim/vim#13916closes: vim/vim#13925bf321806bf
Remove `export` pramgas from defs headers as it causes IWYU to believe
that the definitions from the defs headers comes from main header, which
is not what we really want.
