Problem: Vim9 script commands not sufficiently tested.
Solution: Add more tests. Fix storing global variable. Make script
variables work.
b283a8a680
Vim9 is N/A. Skip.
"set_vim_var_tv()" does not throw E1063 on type mismatch.
See https://github.com/neovim/neovim/pull/25394 .
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: More code can be moved to evalvars.c.
Solution: Move code to where it fits better. (Yegappan Lakshmanan,
closesvim/vim#4883)
da6c033421
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: The ops.c file is too big.
Solution: Move code for dealing with registers to a new file. (Yegappan
Lakshmanan, closesvim/vim#4982)
4aea03eb87
Co-authored-by: Bram Moolenaar <Bram@vim.org>
These are not needed after #35129 but making uncrustify still play nice
with them was a bit tricky.
Unfortunately `uncrustify --update-config-with-doc` breaks strings
with backslashes. This issue has been reported upstream,
and in the meanwhile auto-update on every single run has been disabled.
Problem: ext_messages cannot tell when the screen was cleared, which is
needed to clear visible messages. An empty message is also
never emitted, but clears messages from the message grid.
Solution: Repurpose the "msg_clear" event to be emitted when the screen
was cleared. Emit an empty message with the `empty` kind to
hint to a UI to clear the cmdline area.
Problem: It was decided on Matrix chat that multitype options won't be necessary for Neovim options, and that options should only have a single canonical type. Therefore the code for supporting multitype options is unnecessary.
Solution: Remove the additional code that's used to provide multitype option support.
Problem: The name `scope` is often used to refer to option flags because
`OPT_LOCAL` and `OPT_GLOBAL` are often used to determine the option
scope. This leads to the name `req_scope` being used for actual option
scopes instead.
Solution: Since the end-goal is to remove `OPT_LOCAL` and `OPT_GLOBAL`
entirely and replace them with `OptScope`, rename `OptScope` variables
to `scope` and the old scope flag variables to `opt_flags`.
Problem: Highlight group id is not propagated to the end of the message call
stack, where ext_messages are emitted.
Solution: Refactor message functions to pass along highlight group id
instead of attr id.
Problem: Currently we use macros with hardcoded flag values for option flags, which is messy and requires a lot of mental math for adding / removing option flags. Using macros for option flags also means that they cannot be used inside debuggers.
Solution: Create a new `OptFlags` enum that stores all the option flags in an organized way that is easier to understand.
Problem: tests: not enough tests for setting options
Solution: Add more comprehensive tests to test_options (Milly).
closes: vim/vim#15856484facebe4
Restore behavior of &l:option for unset local boolean options that was
accidentally changed in #26429.
Co-authored-by: Milly <milly.ca@gmail.com>
In the api_info() output:
:new|put =map(filter(api_info().functions, '!has_key(v:val,''deprecated_since'')'), 'v:val')
...
{'return_type': 'ArrayOf(Integer, 2)', 'name': 'nvim_win_get_position', 'method': v:true, 'parameters': [['Window', 'window']], 'since': 1}
The `ArrayOf(Integer, 2)` return type didn't break clients when we added
it, which is evidence that clients don't use the `return_type` field,
thus renaming Dictionary => Dict in api_info() is not (in practice)
a breaking change.
Problem: Functions are global while they could be local.
Solution: Add "static". Add a few tests. (Yegappan Lakshmanan,
closesvim/vim#10612)
ee47eaceaa
Omit script_name_after_autoload(), untrans_function_name(): Vim9 script
only.
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: String interpolation fails for List type
Solution: use implicit string(list) for string interpolation and :put =
(Yegappan Lakshmanan)
related: vim/vim#14529closes: vim/vim#14556bce51d9005
Cherry-pick eval_to_string_eap() from patch 8.2.1914.
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: Crash when using heredoc with comment in command block.
Solution: Handle a newline more like the end of the line, fix coverity
warning (zeertzjq).
closes: vim/vim#145351f5175d9af
Problem: POSIX function name in exarg struct causes issues
on OpenVMS
Solution: Rename getline member in exarg struct to ea_getline,
remove isinf() workaround for VMS
There are compilers that do not treat well POSIX functions - like
getline - usage in the structs.
Older VMS compilers could digest this... but the newer OpenVMS compilers
( like VSI C x86-64 X7.4-843 (GEM 50XB9) ) cannot deal with these
structs. This could be limited to getline() that is defined via
getdelim() and might not affect all POSIX functions in general - but
avoiding POSIX function names usage in the structs is a "safe side"
practice without compromising the functionality or the code readability.
The previous OpenVMS X86 port used a workaround limiting the compiler
capabilities using __CRTL_VER_OVERRIDE=80400000
In order to make the OpenVMS port future proof, this pull request
proposes a possible solution.
closes: vim/vim#137046fdb628082
Co-authored-by: Zoltan Arpadffy <zoltan.arpadffy@gmail.com>
Problem: Some code lines not covered by tests.
Solution: Add a few more test cases. Fix getting more than one error for
invalid assignment.
8b716f5f22
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Remove `export` pramgas from defs headers as it causes IWYU to believe
that the definitions from the defs headers comes from main header, which
is not what we really want.
Problem:
`findoption()` searches through the options[] table linearly for option
names, even though hashy can be used to generate a compile-time hash
table for it.
Solution:
Use hashy to generate a compile time hash table for finding options.
This also allows handling option aliases, so we don't need separate
options[] table entries for things like 'viminfo'.
Problem: We have `P_(BOOL|NUM|STRING)` macros to represent an option's type, which is redundant because `OptValType` can already do that. The current implementation of option type flags is also too limited to allow adding multitype options in the future.
Solution: Remove `P_(BOOL|NUM|STRING)` and replace it with a new `type_flags` attribute in `vimoption_T`. Also do some groundwork for adding multitype options in the future.
Side-effects: Attempting to set an invalid keycode option (e.g. `set t_foo=123`) no longer gives an error.
Problem: Many places in the code use `findoption()` to access an option using its name, even if the option index is available. This is very slow because it requires looping through the options array over and over.
Solution: Use option index instead of name wherever possible. Also introduce an `OptIndex` enum which contains the index for every option as enum constants, this eliminates the need to pass static option names as strings.
Problem: Currently, `get_option_value()` returns 3 separate things: The actual value of the option, whether the option is hidden, and the option flags. This makes the function difficult to refactor, modify or otherwise reason about.
Solution: Split `get_option_value()` into 3 functions, each with a single purpose. This also affects `get_option_value_for()`.
FUNC_ATTR_* should only be used in .c files with generated headers.
Defining FUNC_ATTR_* as empty in headers causes misuses of them to be
silently ignored. Instead don't define them by default, and only define
them as empty after a .c file has included its generated header.
We already have an extensive suite of static analysis tools we use,
which causes a fair bit of redundancy as we get duplicate warnings. PVS
is also prone to give false warnings which creates a lot of work to
identify and disable.
long is 32 bits on windows, while it is 64 bits on other architectures.
This makes the type suboptimal for a codebase meant to be
cross-platform. Replace it with more appropriate integer types.
BREAKING CHANGE: This breaks the OptionSet autocommand, as the `v:` values associated with it (`v:option_new`, `v:option_old`, `v:option_oldlocal` and `v:option_oldglobal`) are now the same type as the option, instead of all option values being converted to strings.
- Move vimoption_T to option.h
- option_defs.h is for option-related types
- option_vars.h corresponds to Vim's option.h
- option_defs.h and option_vars.h don't include each other
