Problem:
The order of the validation performed by vim.validate() is
unpredictable.
- harder to write reliable tests.
- confusing UX because validation result might return different errors randomly.
Solution:
Iterate the input using `vim.spairs()`.
Future:
Ideally, the caller could provide an "ordered dict".
Problem: filetype: some requirements files are not recognized
Solution: Detect '*-requirements.txt', 'constraints.txt',
'requirements.in', 'requirements/*.txt' and 'requires/*.txt'
as requirements filetype, include pip compiler, include
requirements filetype and syntax plugin
(Wu, Zhenyu, @raimon49)
closes: vim/vim#14379f9f5424d3e
Co-authored-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Co-authored-by: raimon <raimon49@hotmail.com>
Problem: filetype: some mail tools not recognized
Solution: Detect '.mbsncrc' as conf, '.msmtprc' as msmtp
and '.notmuch-config' as ini filetype
(Shane-XB-Qian)
closes: vim/vim#14533a7a9a476cf
Co-authored-by: shane.xb.qian <shane.qian@foxmail.com>
Problem:
vim.diagnostic.enable() does not match the signature of vim.lsp.inlay_hint.enable()
Solution:
- Change the signature so that the first 2 args are (bufnr, enable).
- Introduce a 3rd `opts` arg.
- Currently it only supports `opts.ns_id`.
Problem:
`vim.diagnostic.is_disabled` and `vim.diagnostic.disable` are unnecessary
and inconsistent with the "toggle" pattern (established starting with
`vim.lsp.inlay_hint`, see https://github.com/neovim/neovim/pull/25512#pullrequestreview-1676750276
As a reminder, the rationale is:
- we always need `enable()`
- we always end up needing `is_enabled()`
- "toggle" can be achieved via `enable(not is_enabled())`
- therefore,
- `toggle()` and `disable()` are redundant
- `is_disabled()` is a needless inconsistency
Solution:
- Introduce `vim.diagnostic.is_enabled`, and `vim.diagnostic.enable(…, enable:boolean)`
- Note: Future improvement would be to add an `enable()` overload `enable(enable:boolean, opts: table)`.
- Deprecate `vim.diagnostic.is_disabled`, `vim.diagnostic.disable`
Problem:
vim.ui.open "locks up" Nvim if the spawned process does not terminate. #27986
Solution:
- Change `vim.ui.open()`:
- Do not call `wait()`.
- Return a `SystemObj`. The caller can decide if it wants to `wait()`.
- Change `gx` to `wait()` only a short time.
- Allows `gx` to show a message if the command fails, without the
risk of waiting forever.
Problem: String interpolation fails for Dict type
Solution: Support Dict data type properly, also support :put =Dict
(without having to convert it to string() first)
(Yegappan Lakshmanan)
fixes: vim/vim#14529closes: vim/vim#14541f01493c550
Co-authored-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Problem: noautocmd is confusing; despite its name, it doesn't block all
autocommands (instead it blocks only those related to setting the buffer), and
is commonly used by plugins to open windows while producing minimal
side-effects.
Solution: be consistent and block all autocommands when noautocmd is set.
This includes WinNew (again), plus autocommands from entering the window (if
enter is set) like WinEnter, WinLeave, TabEnter, .etc.
See the discussion at https://github.com/neovim/neovim/pull/14659#issuecomment-2040029517
for more information.
Remove win_set_buf's noautocmd argument, as it's no longer needed.
NOTE: pum_create_float_preview sets noautocmd for win_set_buf, but all its
callers already use block_autocmds.
Despite that, pum_create_float_preview doesn't actually properly handle
autocommands (it has no checks for whether those from win_enter or
nvim_create_buf free the window).
For now, ensure autocommands are blocked within it for correctness (in case it's
ever called outside of a block_autocmds context; the function seems to have been
refactored in #26739 anyway).
Problem:
The `:terminal` auto-close logic does not support `&shell` that has
arguments, e.g., `/bin/bash -O globstar`.
Solution:
Join `argv` and match `&shell`. This is not perfect since `&shell` may
contain irregular spaces and quotes, but it seems to be good enough.
This reverts commit 4382d2ed56.
The story for this feature was left in an incomplete state. It was never
the intention to unilaterally fold all information, only the ones that
did not contain relevant information. This feature does more harm than
good in its incomplete state.
Problem: filetype: some history files are not recognized
Solution: Add some history patterns to filetype.vim
(Wu, Zhenyu)
closes: vim/vim#14513da70feabea
Co-authored-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Problem: filetype: xilinx files are not recognized
Solution: Add a few xilinx specific file patterns,
inspect lpr files for being xml/pascal
(Wu, Zhenyu)
closes: vim/vim#14454614691ceef
Co-authored-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
Problem: filetype: some TeX files are not recognized
Solution: Add more patterns for TeX files and inspect
a few more files for being TeX files
(Wu, Zhenyu)
closes: vim/vim#1445661ee833a50
Co-authored-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
To avoid repeatedly requesting a buffer multiple times before a request is completed, the current implementation puts the requested buffer into the active_refreshes table before requesting.
But since we only remove the buffer from active_refreshes in the lsp-handler of textDocument/codeLens, this will cause if the user sends a request that cannot trigger lsp-handler (for example, if there is an LSP server attached to the current buffer, and especially when the user creates an autocmd which performs vim.lsp.codelens.refresh after the BufEnter event is triggered like in the document example), this buffer will be put into active_refreshes, and there is no way to remove it, which will result in all subsequent vim.lsp.codelens.refresh not requesting textDocument/codeLens.
According to the LSP specification, the CodeLens.command is optional but the CodeLens.command.command is not optional, which means the correct representation of a display-only code lens is indeed one with a command with a title to display and an empty string as command.
Problem: filetype: R history files are not recognized
Solution: Detect '.Rhistory' files as r filetype
(Wu, Zhenyu)
closes: vim/vim#14440fc21b6437c
Co-authored-by: Wu, Zhenyu <wuzhenyu@ustc.edu>
runtime(doc): Normalise builtin-function optional parameter formatting
These should generally be formatted as func([{arg}]) and referenced as
{arg} in the description.
closes: vim/vim#144389cd9e759ab
Co-authored-by: Doug Kearns <dougkearns@gmail.com>
Design
- Enable commenting support only through `gc` mappings for simplicity.
No ability to configure, no Lua module, no user commands. Yet.
- Overall implementation is a simplified version of 'mini.comment'
module of 'echasnovski/mini.nvim' adapted to be a better suit for
core. It basically means reducing code paths which use only specific
fixed set of plugin config.
All used options are default except `pad_comment_parts = false`. This
means that 'commentstring' option is used as is without forcing single
space inner padding.
As 'tpope/vim-commentary' was considered for inclusion earlier, here is
a quick summary of how this commit differs from it:
- **User-facing features**. Both implement similar user-facing mappings.
This commit does not include `gcu` which is essentially a `gcgc`.
There are no commands, events, or configuration in this commit.
- **Size**. Both have reasonably comparable number of lines of code,
while this commit has more comments in tricky areas.
- **Maintainability**. This commit has (purely subjectively) better
readability, tests, and Lua types.
- **Configurability**. This commit has no user configuration, while
'vim-commentary' has some (partially as a counter-measure to possibly
modifying 'commentstring' option).
- **Extra features**:
- This commit supports tree-sitter by computing `'commentstring'`
option under cursor, which can matter in presence of tree-sitter
injected languages.
- This commit comments blank lines while 'tpope/vim-commentary' does
not. At the same time, blank lines are not taken into account when
deciding the toggle action.
- This commit has much better speed on larger chunks of lines (like
above 1000). This is thanks to using `nvim_buf_set_lines()` to set
all new lines at once, and not with `vim.fn.setline()`.
Problem:
Some servers don't report progress during initialize unless the client
sets the `workDoneToken`
See https://microsoft.github.io/language-server-protocol/specifications/lsp/3.17/specification/#initiatingWorkDoneProgress
In particular:
> There is no specific client capability signaling whether a client will
> send a progress token per request. The reason for this is that this is
> in many clients not a static aspect and might even change for every
> request instance for the same request type. So the capability is signal
> on every request instance by the presence of a workDoneToken property.
And:
> Servers can also initiate progress reporting using the
> window/workDoneProgress/create request. This is useful if the server
> needs to report progress outside of a request (for example the server
> needs to re-index a database). The token can then be used to report
> progress using the same notifications used as for client initiated
> progress.
So far progress report functionality was relying entirely on the latter.
Solution:
Set a `workDoneToken`
Closes https://github.com/neovim/neovim/issues/27938
Ref #21393
- Move default user commands to _defaults.lua as that now contains all
kinds of defaults rather than just default mappings and menus.
- Remove the :aunmenu as there are no menus when _defaults.lua is run.
Problem: Dialog for file changed outside of Vim not tested.
Solution: Add a test. Move FileChangedShell test. Add 'L' flag to
feedkeys().
5e66b42aae
Co-authored-by: Bram Moolenaar <Bram@vim.org>
Problem: filetype: typespec files are not recognized
Solution: Detect '*.tsp' files as typespec
(Hilmar Wiegand)
Specs is at https://typespec.io/closes: vim/vim#143926c9f4f98f1
Co-authored-by: Hilmar Wiegand <me@hwgnd.de>
